Jump to content
Sign in to follow this  
bvr

Code Problem

Recommended Posts

this is part of the code to a d2 bot. I am having problems with "non"array variables. take a look and point out some other problems, and show me how to fix it. thanks.

non-array varable it says

$attack[0]

Func Attack()
$D2attack = StringSplit(StringTrimRight($attack, 1), ";")
Local $mouseButton
For $i = 1 to $attack[0]
    $currentAttack = StringSplit($attacks[$i], ",")
;$currentAttack[1] is the hotkey
;$currentAttack[2] is the # of repeats
;$currentAttack[3] is the mouse button
;$currentAttack[4] is the delay
    If ($currentAttack[3] = 1) Then
        $mouseButton = "left"
    ElseIf ($currentAttack[3] = 2) Then
        $mouseButton = "right"
    EndIf

    SendHotKey($currentAttack[1])
    Sleep($MouseClick)

;begin attack sequence
    If ($currentAttack[2] = "H") Then
        MouseMove($attackX, $attackY, 15, 12, $mouseSpeed)
        MouseDown($mouseButton)
        Sleep($currentAttack[4])
        MouseUp($mouseButton)
    Else
        For $n = 1 to $currentAttack[2]
            If ($currentAttack[3] = 0) Then;forces a delay if mouse button is 0
                Sleep($currentAttack[4])
            ElseIf ($currentAttack[3] = 1) Then
                Send("{SHIFTDOWN}")
                Sleep(20)
                MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)
                Send("{SHIFTUP}")
            Else
                MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)
            EndIf
            Sleep($currentAttack[4])
        Next
    EndIf
Next
EndFunc

Share this post


Link to post
Share on other sites

this is part of the code to a d2 bot. I am having problems with "non"array variables. take a look and point out some other problems, and show me how to fix it. thanks.

non-array varable it says

$attack[0]

Func Attack()
$D2attack = StringSplit(StringTrimRight($attack, 1), ";")
Local $mouseButton
For $i = 1 to $attack[0]
    $currentAttack = StringSplit($attacks[$i], ",")
;$currentAttack[1] is the hotkey
;$currentAttack[2] is the # of repeats
;$currentAttack[3] is the mouse button
;$currentAttack[4] is the delay
    If ($currentAttack[3] = 1) Then
        $mouseButton = "left"
    ElseIf ($currentAttack[3] = 2) Then
        $mouseButton = "right"
    EndIf

    SendHotKey($currentAttack[1])
    Sleep($MouseClick)

;begin attack sequence
    If ($currentAttack[2] = "H") Then
        MouseMove($attackX, $attackY, 15, 12, $mouseSpeed)
        MouseDown($mouseButton)
        Sleep($currentAttack[4])
        MouseUp($mouseButton)
    Else
        For $n = 1 to $currentAttack[2]
            If ($currentAttack[3] = 0) Then;forces a delay if mouse button is 0
                Sleep($currentAttack[4])
            ElseIf ($currentAttack[3] = 1) Then
                Send("{SHIFTDOWN}")
                Sleep(20)
                MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)
                Send("{SHIFTUP}")
            Else
                MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)
            EndIf
            Sleep($currentAttack[4])
        Next
    EndIf
Next
EndFunc

<{POST_SNAPBACK}>

You should include the code atleast that sets that variable. If I dont know how that variable is set or what is in it there is no way I can help you.

Let me know about: $attack, $attacks[]

Those are just the few I spotted off the bat. One of which happens to be the one in question.

JS


AutoIt Links

File-String Hash Plugin Updated! 04-02-2008 Plugins have been discontinued. I just found out.

ComputerGetInfo UDF's Updated! 11-23-2006

External Links

Vortex Revolutions Engineer / Inventor (Web, Desktop, and Mobile Applications, Hardware Gizmos, Consulting, and more)

Share this post


Link to post
Share on other sites

this is part of the code to a d2 bot. I am having problems with "non"array variables. take a look and point out some other problems, and show me how to fix it. thanks.

<{POST_SNAPBACK}>

$D2attack = StringSplit(StringTrimRight($attack, 1), ";")

Local $mouseButton

For $i = 1 to $D2attack[0]

$currentAttack = StringSplit($D2attacks[$i], ",")


SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites

$D2attack = StringSplit(StringTrimRight($attack, 1), ";")

Local $mouseButton

For $i = 1 to $D2attack[0]

    $currentAttack = StringSplit($D2attacks[$i], ",")

<{POST_SNAPBACK}>

As JdeB pointed out, it was really obvious.

Can't people take a 10 min break and then look at the code carefully?

Share this post


Link to post
Share on other sites

Think I got that fixed, now I get this error

MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)

Error Incorrect number of parameters in function call

Here is my total source.

$D2Path = iniRead("Settings.ini", "Main", "D2Path", "")
$D2Exe = iniRead("Settings.ini", "Main", "D2Exe", "")
$D2Parameters = iniRead("Settings.ini", "Main", "D2Parameters", "")
$Account = iniRead("Settings.ini", "Main", "Account", "")
$Password = iniRead("Settings.ini", "Main", "Password", "")
$D2Location = iniRead("Settings.ini", "Main", "D2Location", "")
$Attack = iniRead("Settings.ini", "Main", "Attack", "")
$pauseButton = IniRead("Settings.ini", "Main", "PauseButton", "{PAUSE}")
$attackX = IniRead("Settings.ini", "Main", "AttackX", "602")
$attackY = IniRead("Settings.ini", "Main", "AttackY", "138")


$D2Load = iniRead("Settings.ini", "Delays", "D2Load", "")
$D2Login = iniRead("Settings.ini", "Delays", "D2Login", "")
$D2Select = iniRead("Settings.ini", "Delays", "D2Select", "")
$D2GameWait = iniRead("Settings.ini", "Delays", "D2GameWait", "")
$D2ScriptStart = iniRead("Settings", "Delays", "D2ScriptStart", "")
$D2PickUp = iniRead("Settings.ini", "Delays", "D2Pickup", "")
$MouseClick = IniRead("Settings.ini", "Delays", "MouseClick", "300")
$mouseSpeed = IniRead("Settings.ini", "Delays", "MouseSpeed", "1")

LoadD2()
ActivateD2()
D2Login()
D2Location()
D2Create()
D2Pindle()
Attack()



Func LoadD2()
Run($D2Path & '\' & $D2Exe & ' ' & $d2parameters, $D2Path )
    WinWait ( 'Diablo II' )
    WinActivate ( 'Diablo II' )
      Sleep ( 500 )
    WinMove ( 'Diablo II', '', 0, 0 )
      Sleep ($D2Load)
EndFunc

Func ActivateD2()
WinActivate("Diablo II", "")
Sleep(5000)
EndFunc

Func D2Login()
Send("{TAB}")
Sleep(1500)
Send($Account)
Sleep(1500)
Send("{TAB}")
Sleep(1500)
Send($Password)
Sleep(1500)
Send("{ENTER}")
Sleep($D2Login)
EndFunc

Func D2Location()
Select
Case $D2Location = 1
    Send("{Enter}")
Case $D2Location = 2
    Send("{Right}")
    Send("{ENTER}")
Case $D2Location = 3
    Send("{Down}")
    Send("{ENTER}")
Case $D2Location = 4
    Send("{Down}")
    Send("{Right}")
    Send("{ENTER}")
Case $D2Location = 5
    Send("{Down}")
    Send("{Down}")
    Send("{ENTER}")
Case $D2Location = 6
    Send("{Down}")
    Send("{Down}") 
    Send("{Right}") 
    Send("{ENTER}")
Case $D2Location = 7
    Send("{Down}") 
    Send("{Down}") 
    Send("{Down}") 
    Send("{ENTER}")
Case $D2Location = 8
    Send("{Down}") 
    Send ("{Down}") 
    Send("{Down}") 
    Send("{Right}") 
    Send("{ENTER]")
Sleep(500)
EndSelect
EndFunc


Func D2Create()

    WinActivate ( 'Diablo II' )
    WinWaitActive ( 'Diablo II' )
    MouseClick( "left", 601, 482 )
      Sleep ( 1500 )
    $Name = Random ( 100000, 900000 )
    $Pass = Random ( 100000, 900000 )
    Send ( $Name & '{TAB}' )
      Sleep ( 250 )
    Send ( $Pass & '{ENTER}' )
      Sleep ( $D2GameWait + 250 )
    EndFunc 

Func ExitGame()
    WinActivate ( 'Diablo II', ',' )
      Sleep ( 250 )
    Send ( '{ESC}' )
      Sleep ( 250 )
    Send ( '{UP}' )
      Sleep ( 250 )
    Send ( '{ENTER}' )
      Sleep ( 5000 )
Return
EndFunc 

Func D2Pindle();pindleskin script
;Walk To Portal
Sleep($D2ScriptStart)
MouseMove(148, 519)
MouseClick("left")
Sleep(2500)
MouseMove(183, 493)
MouseClick("left")
Sleep(2500)
MouseMove(227, 564)
MouseClick("left")
Sleep(2500)
MouseMove(218, 561)
MouseClick("left")
Sleep(2500)
MouseMove(202, 553)
MouseClick("left")
Sleep(4500)
MouseMove(143, 188)
MouseClick("left")
Sleep(5000)
MouseMove(386, 267)
MouseClick("left")
Sleep(4000)

;walk to Pindle
MouseClick("left", 475, 127)
Sleep(500)
MouseClick("left", 608, 149)
Sleep(500)
MouseClick("left", 689, 197)
Sleep(500)
MouseClick("left", 627, 145)
Sleep(500)
EndFunc

Func SendSkillKey($SendSkillkey)
Select
    Case $skillkey="F1"
        Send("{F1}")
    Case $skillkey="F2"
        Send("{F2}")
    Case $skillkey="F3"
        Send("{F3}")
    Case $skillkey="F4"
        Send("{F4}")
    Case $skillkey="F5"
        Send("{F5}")
    Case $skillkey="F6"
        Send("{F6}")
    Case $skillkey="F7"
        Send("{F7}")
    Case $skillkey="F8"
        Send("{F8}")
    Case $skillkey="F9"
        Send("{F9}")
EndSelect
EndFunc


Func Attack()
$attack = StringSplit(StringTrimRight($attack, 1), ";")
Local $mouseButton
For $i = 1 to $attack[0]
    $currentAttack = StringSplit($attack[$i], ",")
;$currentAttack[1] is the hotkey
;$currentAttack[2] is the # of repeats
;$currentAttack[3] is the mouse button
;$currentAttack[4] is the delay
    If ($currentAttack[3] = 1) Then
        $mouseButton = "left"
    ElseIf ($currentAttack[3] = 2) Then
        $mouseButton = "right"
    EndIf

    SendHotKey($currentAttack[1])
    Sleep($MouseClick)

;begin attack sequence
    If ($currentAttack[2] = "H") Then
        MouseMove($attackX, $attackY, 15, 12, $mouseSpeed)
        MouseDown($mouseButton)
        Sleep($currentAttack[4])
        MouseUp($mouseButton)
    Else
        For $n = 1 to $currentAttack[2]
            If ($currentAttack[3] = 0) Then;forces a delay if mouse button is 0
                Sleep($currentAttack[4])
            ElseIf ($currentAttack[3] = 1) Then
                Send("{SHIFTDOWN}")
                Sleep(20)
                MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)
                Send("{SHIFTUP}")
            Else
                MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)
            EndIf
            Sleep($currentAttack[4])
        Next
    EndIf
Next
EndFunc

Func SendHotKey($hotkey)
If (StringLeft($hotkey, 1) = "F") AND (StringLen($hotkey) > 1) Then
    Send("{" & $hotkey & "}")
ElseIf ($hotkey = "NULL") Then
;don't send a hotkey
Else
    Send($hotkey)
EndIf
EndFunc

Share this post


Link to post
Share on other sites

Think I got that fixed, now I get this error

MouseClick($mouseButton, $attackX, $attackY, 15, 12, $mouseSpeed)

Error Incorrect number of parameters in function call

<{POST_SNAPBACK}>

Well what do you think looking at the syntax in the helpfile?

MouseClick ( "button" [, x, y [, clicks [, speed ]]] )

i count 5 parameters... and how many do you have ?????


SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites

dude ... that's rishodi's pindle bot and the function is

MyRmouseClick not just mouse click ... i kinda made a pindle bot and i used some of Rishodi's stuff ... about the mouse click u need a few functions here they are:

Func MyRMouseClick($button, $x, $y, $xFactor, $yFactor, $speed)

MyRMouseMove($x, $y, $xFactor, $yFactor, $speed)

MouseClick($button)

EndFunc

Func MyRMouseMove($x, $y, $xFactor, $yFactor, $speed)

MyMouseMove(Random($x - $xFactor, $x + $xFactor), Random($y - $yFactor, $y + $yFactor), $speed)

EndFunc

Func MyMouseMove($x, $y, $speed)

MouseMove($x, $y, $speed)

EndFunc

Edited by pcdestroyer

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...