Jump to content

How to determine Truecrypt Drive.

Puck

By Puck
in AutoIt General Help and Support

 Share

Recommended Posts

Puck Seeker

Puck

Posted
Posted

I have been asked to create a pretty simple idiot proof backup utility for users to take a snapshot of specific directories. I am using Truecrypt on USB drive for encryption. Right now I have the script hard coded to use T: for the encrypted container but would really like some way of letting Truecrypt use 'first available' in the very rare event T: is being used for something else. Here is what I have so far. Any tips on how to accomplish this would be greatly appreciated.

Thanks

;USB Backup

#include <GuiConstantsEx.au3>
#include <GuiEdit.au3>


;Check if first time run and if so force password change
$FirstCheck = FileExists(@ScriptDir & "\firstrun")
If $FirstCheck = 1 Then Call("PasswordChange")

; Create Backup GUI
$Backup = GuiCreate("Backup Utility", 230, 120)
GuiSetIcon(@ScriptDir&"\Truecrypt\nw.ico")

; Create Backup GUI BUTTONS
$Button_Backup = GuiCtrlCreateButton("Backup", 10, 10, 100, 100)
$Button_Restore = GUICtrlCreateButton("Restore", 120, 10, 100, 100)
;$Button_Exit = GUICtrlCreateButton("Exit", 65, 120, 100, 100)

; Show GUI
GuiSetState(@SW_SHOW,$Backup)

;Unmap T Drive
DriveMapDel("T:")


While 1
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            Exit
        Case $msg = $Button_Backup
            GuiSetState(@SW_HIDE,$Backup)
            Run(@ScriptDir&"\TrueCrypt\TrueCrypt.exe /q background /lt /m rm /v nwbackup.tc")
            WinWaitActive("Enter password")
            WinWaitClose("Enter password")
                Do 
                    $DrvStatus = DriveStatus("T:")
                    Sleep(1000)
                Until $DrvStatus = "READY"
            SplashTextOn("NW Backup", @CRLF&"Backing up My Documents", 300, 75)
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe "'&@MyDocumentsDir&'" t:\backups\mydocs\ *.* /MIR')
            SplashTextOn("NW Backup", @CRLF&"Backing up Desktop", 300, 75)
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe "'&@DesktopDir&'" t:\backups\desktop\ *.* /MIR')
            SplashTextOn("NW Backup", @CRLF&"Backing up Favorites", 300, 75)
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe "'&@FavoritesDir&'" t:\backups\favorites\ *.* /MIR')
            SplashTextOn("NW Backup", @CRLF&"Backing up Misc.", 300, 75)
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe "'&@ProgramFilesDir&'\LOTUS\NOTES\DATA\" t:\backups\lnotes\ names.nsf /MIR')
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe "'&@ProgramFilesDir&'\NWDESKTOP\" t:\backups\NWDESKTOP\ *.* /MIR')
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe "'&@ProgramFilesDir&'\NWDESKTOP_BACKUP\" t:\backups\NWDESKTOP_BACKUP\ *.* /MIR')
            SplashOff()
            MsgBox(0,"NW Backup","Backup Complete")
            Run(@ScriptDir&"\TrueCrypt\TrueCrypt.exe /q /dt")
            SplashTextOn("NW Backup",@CRLF&"Please wait while the encrypted container is dismounted.",425,75)
                Do 
                    $DrvStatus = DriveStatus("T:")
                    Sleep(1000)
                Until $DrvStatus = "Invalid"
            SplashOff()         
            MsgBox(0,"NW Backup","It is now safe to remove your drive")
            Exit
        Case $msg = $Button_Restore
            GuiSetState(@SW_HIDE,$Backup)
            Run(@ScriptDir&"\TrueCrypt\TrueCrypt.exe /q background /lt /m rm /v nwbackup.tc")
            WinWaitActive("Enter password")
            WinWaitClose("Enter password")
                Do 
                    $DrvStatus = DriveStatus("T:")
                    Sleep(1000)
                Until $DrvStatus = "READY"
            SplashTextOn("NW Backup", @CRLF&"Restoring My Documents", 300, 75)
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe t:\backups\mydocs\ "'&@MyDocumentsDir&'" *.* /E')
            SplashTextOn("NW Backup", @CRLF&"Restoring Desktop", 300, 75)
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe t:\backups\desktop\ "'&@DesktopDir&'" *.* /E')
            SplashTextOn("NW Backup", @CRLF&"Restoring Favorites", 300, 75)
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe t:\backups\favorites\ "'&@FavoritesDir&'" *.* /E')
            SplashTextOn("NW Backup", @CRLF&"Restoring Misc.")
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe t:\backups\lnotes\ "'&@ProgramFilesDir&'\LOTUS\NOTES\DATA\" names.nsf /E')
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe t:\backups\NWDESKTOP\ "'&@ProgramFilesDir&'\NWDESKTOP\" *.* /E')
            RunWait(@COMSPEC & ' /c '&@ScriptDir&'robocopy.exe t:\backups\NWDESKTOP_BACKUP\ "'&@ProgramFilesDir&'\NWDESKTOP_BACKUP\" *.* /E')
            SplashOff()
            MsgBox(0,"NW Backup","Restore Complete")
            Run(@ScriptDir&"\TrueCrypt\TrueCrypt.exe /q /dt")
            SplashTextOn("NW Backup",@CRLF&"Please wait while the encrypted container is dismounted.",300,75)
                Do 
                    $DrvStatus = DriveStatus("T:")
                    Sleep(1000)
                Until $DrvStatus = "Invalid"
            SplashOff()
            MsgBox(0,"NW Backup","It is now safe to remove your drive")
            Exit
        EndSelect
WEnd


Func PasswordChange()
    $i = 1 
    MsgBox(0, "Password Change", "This appears to be your first time using this utility. You must now select a password")
    $CHPW = GUICreate("Password Change",300,200)
    GuiCtrlCreateLabel("Please select a new password and confirm"&@CRLF&@CRLF&"Password needs to be at least 8 characters in length", 10, 10, 280, 50)
    $INPUT_1 = GUICtrlCreateInput("New Password",5,100,290,20,$ES_PASSWORD)
    $INPUT_2 = GUICtrlCreateInput("Confirm Password",5,125,290,20,$ES_PASSWORD)
    $Button_OK = GUICtrlCreateButton("OK", 130, 152, 40, 40)
    GUISetState(@SW_SHOW,$CHPW)
    
    While $i = 1
        $msg = GUIGetMsg()
        Select
            Case $msg = $GUI_EVENT_CLOSE
                Exit
            Case $msg = $Button_OK
                $NEWPW = GUICtrlRead($INPUT_1)
                $CONFIRMPW = GUICtrlRead($INPUT_2)
                If StringLen($NEWPW) <= 7 Then 
                    MsgBox(0, "Pasword Length", "Password is to short. Password needs to be at least 8 characters in length.")
                ElseIf StringCompare($NEWPW, $CONFIRMPW) <> 0 Then 
                    MsgBox(0, "Password Mismatch", "Passwords do not match!")
                Else
                    $i = 0  
                EndIf   
        EndSelect
    Wend 
    MsgBox(0,"NOTICE!","Password change can take up to 2 minutes. Please do not touch the keyboard or mouse."&@CRLF&@CRLF&"Click OK to begin.")
    GUISetState(@SW_HIDE,$CHPW)
    SplashTextOn("NW Backup","Changing Password...Please Wait",300,75)
    Run(@ScriptDir & "\Truecrypt\Truecrypt.exe")
    WinWaitActive("TrueCrypt")
    Send("!F")
    WinWaitActive("Select a TrueCrypt Volume")
    Send(@Scriptdir&"nwbackup.tc{ENTER}") 
    Send("{ALT}vcc{ENTER}")
    WinWaitActive("Change Password or Keyfiles")
    Send("nwdefault{TAB}{TAB}{TAB}"&$NEWPW&"{TAB}"&$CONFIRMPW&"{TAB}{ENTER}")
    WinWaitActive("TrueCrypt","WARNING")
    Send("!Y")
    WinWaitActive("TrueCrypt","Password")
    Send("{ENTER}")
    WinWaitActive("TrueCrypt","&Create Volume")
    Send("!X")
    SplashOff()
    MsgBox(0,"Password change","Password change complete."&@CRLF&@CRLF&"Click OK to return.")
    FileDelete(@ScriptDir & "\firstrun")
EndFunc
rover Universalist

rover

Posted
Posted (edited)

I have been asked to create a pretty simple idiot proof backup utility for users to take a snapshot of specific directories. I am using Truecrypt on USB drive for encryption. Right now I have the script hard coded to use T: for the encrypted container but would really like some way of letting Truecrypt use 'first available' in the very rare event T: is being used for something else. Here is what I have so far. Any tips on how to accomplish this would be greatly appreciated.

Thanks

Welcome back to the forums

have a look at DriveMapGet() and DriveMapAdd(), both set error if unable to read mapping or set mapping.

you could check drive letters in a loop or check drive mappings in registry key "HKEY_CURRENT_USER\Network"

with the Reg functions.

you can also search for "drive mapping" in the forum search engine

from helpfile examples:

MsgBox(0, "Drive T: is mapped to", DriveMapGet("T:"))
Local $var, $out
For $i = 1 to 24
    $var = RegEnumKey("HKEY_CURRENT_USER\Network", $i)
    If @error <> 0 Then ExitLoop
    $var &= ":  " & DriveMapGet($var & ":") 
    If @error Then $var &= " not connected or unmapped"
    $var &= @CRLF
    $out &= $var
Next
MsgBox(0, "Mapped drives: HKEY_CURRENT_USER\Network", $out)
Edited by rover

I see fascists...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...