Timeline
Dec 30, 2014:
- 7:42 PM Ticket #2961 (FileGetSize() Documentation) updated by
- Oh okay. Because I tested it and found it was the exact same behavior as for DirGetSize(), where the documentation is more detailed about @error. That's why I thought that info was just missing here. If the @error value also gets set on other cases like you say, this report is irrelevant.
- 6:44 PM Ticket #2963 (Macro for file name in included files) created by
- The sitation: 22 source files, even more unit tests and hundreds of …
Dec 29, 2014:
- 2:22 PM Ticket #2962 (GUICtrlSetImage resizes Pic control with $SS_SUNKEN style) created by
- Reproducing example: […] the size of the pic control (with …
Dec 28, 2014:
- 12:39 PM Ticket #2961 (FileGetSize() Documentation) updated by
- for me there is no bug just pehaps an improvement but it is always difficult to caracterize the type of error with just one @error code. That's the reason it is not more defined. If you use a mounted volume it could be the drive is not accessible Cheers
- 4:47 AM Ticket #2961 (FileGetSize() Documentation) updated by
- file or folder*
- 4:46 AM Ticket #2961 (FileGetSize() Documentation) created by
- Failure: 0 and sets the @error flag to 1. should be Failure: 0 and …
Dec 24, 2014:
- 3:26 PM Ticket #2958 (Keeping AutoIt3Wrapper_Res_Description blank when explicitly set) closed by
- Rejected: Won't happen for several reasons. Ultimately you can remove the total version block. see helpfile. Jos
- 3:24 PM Ticket #2960 (SciTE show code abnormal) closed by
- Wont Fix: There is nothing for me to check as I can't get the issue to appear and either way when this is a generic issue with SciTE , you need to report this at the official website, since I use the same base source. https://groups.google.com/forum/?utm_source=digest&utm_medium=email/#!forum/scite-interest Closed as "won't fix" Jos
- 5:50 AM Ticket #2960 (SciTE show code abnormal) created by
- sorry to open another thread since …
Dec 23, 2014:
- 6:51 PM Ticket #2959 (IE and GUI) closed by
- Works For Me: "I didn't receive any response on the forum so I'm writing here" Wrong thing to do - Trac is not for support. Next time bump your thread at least once. And your script works fine for me with none of the problems you describe - so perhaps for everyone else too, which is why you got no response. M23
- 1:20 PM Ticket #2959 (IE and GUI) created by
- […] When I run this script the GUI is less responsive and what …
- 8:55 AM Ticket #2954 (latest version of scite does not show correctly) closed by
- Rejected: I am not going to do any further investigation when the latest version is working correctly. ;) We use the source from the official SciTE version by Neil so it could very well be it got fixed in one of his releases. Just use the current Beta, which is based on the latest official SciTE release. Closing this BUG report. Thanks Jos
- 5:09 AM Ticket #2954 (latest version of scite does not show correctly) updated by
- sorry,the file's size and version which caused problem I posted maybe is wrong,maybe you can download 6048kb size setup file from https://www.autoitscript.com/cgi-bin/getfile.pl?../autoit3/scite/download/SciTE4AutoIt3.exe to test.
- 5:01 AM Ticket #2954 (latest version of scite does not show correctly) updated by
- I tested the beta version you mentioned, and it is OK indeed, but the 2014/8/1 build does cause the problem , I checked 2014/8/1 build , its version is 3.3.0 and its size is 851 KB (871,936 byte),maybe the newest beta version modified this error. Hope the next stable version can solve this problem.Thanks.
- 12:43 AM Ticket #2958 (Keeping AutoIt3Wrapper_Res_Description blank when explicitly set) created by
- Raised on behalf of an SO user after …
Dec 21, 2014:
- 1:31 PM Ticket #2954 (latest version of scite does not show correctly) updated by
- I have just tried it and have no issues displaying your line when I set the display to 125%. Have you made any changes to your font? The beta versions of SciTE4AutoIt3 editor and utilities can be found here: https://www.autoitscript.com/autoit3/scite/download/beta_SciTE4AutoIt3/ Just download both SciTE.exe and SciLexer.dll and put those in the correct directory. Jos
- 2:38 AM Ticket #2954 (latest version of scite does not show correctly) updated by
- thanks for replying you mention you use the beta version,Is it from this download place https://www.autoitscript.com/site/autoit-script-editor/downloads/ I downloaded from this http address https://www.autoitscript.com/cgi-bin/getfile.pl?../autoit3/scite/download/SciTE4AutoIt3.exe filesize is 6048kb,Is this what you called beta version? and I can input some code using Chinese characters here for you to try InputBox("测试测试","test") you may input above line in SciTE , maybe you need to change the SciTE font setting to choose a big font size,and close your SciTE and reopen again,only when I reopen SciTE,the problem arise.
Dec 20, 2014:
- 9:51 AM Ticket #2954 (latest version of scite does not show correctly) updated by
- I am using the latest Beta and changed my display to 125% but do not see the issue you see. Since you didn't provide an example scriptfile with the character you use, I can't test it with that. If you want you can try the original version of ScTE as release by Neil Hodgson to see if that has the same issue, as that is the base version I use. Jos
- 7:53 AM Ticket #2954 (latest version of scite does not show correctly) updated by
- thanks for replying,sorry for this late response the version of scite which caused this problem is 2014/8/1 build I don't think this problem is releate to specific code , it only caused programmer hard to view code line in SciTE, so I only posted snapshots of what happened, maybe you can not recognize Chinese characters ,I try to explain the problem, in attach.rar , normal.jpg and bug.jpg , I write the same code line in SciTE, normal.jpg shows the normal condition , the first parameter of InputBox is 4 chinese characters which are very clear. bug.jpg shows the error condition , you can see the first parameter and second parameter of InputBox squeese together , that's just the problem, maybe you can replicate this problem by writing any code line in SciTE. I mentioned "change view to 125%" , it is not related to SciTE, I mean to change system view of win7. in Win7 , control panel->view , you can change system view ,100% as default , 125% as medium ,150% as larger, I chose 125%, I doubt this problem is caused by this setting,although I do not test it in default 100% system view , so I'm not sure. last to mention , even in system view 125% , I used old version of SciTE (ver 2.2.7) , no such problem.
Dec 17, 2014:
- 4:43 PM Ticket #2957 (_ArraySort: help needs meaning of defaults and 2D) closed by
- Fixed: Fixed by revision [11166] in version: 3.3.13.20
- 4:42 PM Ticket #2957 (_ArraySort: help needs meaning of defaults and 2D) updated by
-
Component changed
The next release will read as follows: ###Parameters### @@ParamTable@@ $aArray Array to sort $iDescending [optional] If set to 1, sort in descending order $iStart [optional] Index of array to start sorting (default 0 = first element) $iEnd [optional] Index of array to stop sorting (default 0 = last element) $iSubItem [optional] Sub-index to sort on in 2D arrays (default 0 = first column) $iPivot [optional] Use pivot sort algorithm (default = quicksort) I think that is clear enough. M23 - 3:02 PM Ticket #2957 (_ArraySort: help needs meaning of defaults and 2D) created by
- In Parameters, "index" makes sense for 1D (vector). Help should say …
Dec 16, 2014:
- 10:04 PM Ticket #2956 (EndFunc not required in the last function of the script) closed by
- No Bug: Not so strange if you realize that a script with a single line MsgBox(...) will not complain about Exit missing. From there to regarding EOF as an implicit Exit is a small and rather logical step. Closing now.
- 8:54 PM Ticket #2956 (EndFunc not required in the last function of the script) updated by
- OK, thanks JC. Understandable behaviour, still strange…
- 9:42 AM Ticket #2956 (EndFunc not required in the last function of the script) updated by
- It seems that EOF has Exit semantics, as the following tends to demonstrate: you see only one MsgBox. […] I would classify as "No bug" since Au3Check correctly raises an error. Think of it as a feature.
Dec 15, 2014:
- 9:02 PM Ticket #2956 (EndFunc not required in the last function of the script) created by
- With this code : […] I can compile it (from the context menu) and …
- 7:20 AM Ticket #2955 (Using Is### breaks Maps passed ByRef) updated by
- jchd, I realised that last night as I went to bed - the problem happens when the Map is passed as a parameter and a copy is made. Sorry for the confusion. I will try and get a simple reproducer script working today and post it in "Dev Chat" - this needs more scrutiny that it is getting in Trac. M23
Dec 14, 2014:
- 11:46 PM Ticket #2955 (Using Is### breaks Maps passed ByRef) updated by
- M23, $mTest is not passed ByRef in the code exposed. If one changes the function into: […] then everything works as expected. But with your code, this: […] assigns Null to $sTest1.
- 7:40 PM Ticket #2955 (Using Is### breaks Maps passed ByRef) updated by
- > ... but not the one you think you have found... I don't know what sort of problem it is. There is so many things should be used together to reproduce this bug (so i can make some small changes to code and it will work correctly)... but in any way Is<KindOf> should not modify its param. > ... reference to "game" ... This script don't interact with game (only can launch process) or game server in any way. See gen_lng_validate.au3, lng_auto.au3 (this "bug" affects only "more" key) and lng\english.json for details https://bitbucket.org/SyDr/ramm/src/0d6f035cf547b66d425f91a72dda41a189e8f25d?at=no_regrets
- 7:22 PM Ticket #2955 (Using Is### breaks Maps passed ByRef) reopened by
- I now agree that there is a problem - but not the one you think you have found. I believe it happens when you pass a Map ByRef and check on the values. This example shows it clearly: […] So the bug appears to be using Is##### on a Map passed ByRef - I have amended the title. M23 P.S. By the way, I notice the reference to "game" in your script - could I gently point you to the Forum rules: http://www.autoitscript.com/forum/index.php?app=forums&module=extras§ion=boardrules
- 6:09 PM Ticket #2955 (Using Is### breaks Maps passed ByRef) updated by
- Um... Sorry... There is no problem with _Assert() at all. I trying to make a shorter example and lost problem in process. Seems that this problem is related to some non-trivial code when passing maps or sub-maps to user function without and using Is<KindOf> functions AND only if you use some specific keys. Here is a valid example (no assertion is used here): […]
- 5:21 PM Ticket #2955 (Using Is### breaks Maps passed ByRef) closed by
- No Bug
- 5:01 PM Ticket #2955 (Using Is### breaks Maps passed ByRef) updated by
- Nothing wrong with the Map itself - the problem is in way the statement is passed to the _Assert function. I am investigating further. M23 Edit: The problem arises because the 2 variables in the passed statement are Local to the WTF function and so are not recognised by the _Assert function. So the passed string is executed as a literal string and fails. You can see this happening in this example script: […] As you can see the Map contents are unchanged, but when the passed variables are not Global in scope the _Assert function fails. The basic problem is that Execute needs to recognise the variable names in the passed string as variables - and it seems that it only looks in the Global variable list. So a possible bug, but nothing to do with Maps per se I suggest that you open a new ticket that covers the failure of _Assert when passed Local variables. M23
- 12:52 PM Ticket #2955 (Using Is### breaks Maps passed ByRef) created by
- Depending on various things, some map values can be broken Shortest …
Dec 13, 2014:
- 3:58 PM Ticket #2954 (latest version of scite does not show correctly) updated by
- I have a couple of questions so I can see if I can replicate this: - Which version of SciTE are you using? - Can you post the used code in here or attach a file that shows the issue? - How do you change the view to 125%? Jos
- 5:39 AM Ticket #2954 (latest version of scite does not show correctly) created by
- the latest version of scite does not show correctly when user's os is …
Dec 11, 2014:
- 12:58 PM Ticket #2953 (Escaping from input box doesn't return @error = 1) closed by
- Rejected: Duplicate. @OP, stop making bug reports for support questions and go to our forums.
- 12:57 PM Ticket #2952 (Escaping from input box doesn't return @error = 1) closed by
- Rejected: This is not even close to a proper bug report. Go to the forum for support.
- 10:23 AM Ticket #2953 (Escaping from input box doesn't return @error = 1) updated by
-
MsgBox(0, InputBox("Escape me", "Abort this input box"), "@error=" & @error)Works fine for me.
Dec 10, 2014:
- 10:52 PM Ticket #2953 (Escaping from input box doesn't return @error = 1) created by
- Escaping or cancelling from an input box does not return the …
- 10:52 PM Ticket #2952 (Escaping from input box doesn't return @error = 1) created by
- Escaping or cancelling from an input box does not return the …
Dec 8, 2014:
- 10:21 AM Ticket #2879 (objcreate("Microsoft.Update.Session","REMOTEHOST") is not connecting ...) updated by
- Hi Guys is there any update on this as i am getting the same problem ? thanks
Dec 7, 2014:
- 6:12 AM Ticket #2936 (autoit-3.3.13.19 compiler throws error unable to write .tmp file) updated by
- as it turns out, it's the fact that I am specifying the .bin files. why the switch is still shown in help and acted on in the compiler I don't know, if it's not supported anymore.
Dec 4, 2014:
- 2:18 PM Ticket #2936 (autoit-3.3.13.19 compiler throws error unable to write .tmp file) updated by
- nope, it' not norton. norton doesn't log this with 3.3.13.19, it's a bug in the compiler. please fix.
Dec 2, 2014:
- 8:59 AM Ticket #2951 (How to automate [Internet options-Connections-Lan settings-Tick/untick ...) closed by
- Rejected: Please seek support in the forum - Trac is not the place. M23
- 8:00 AM Ticket #2951 (How to automate [Internet options-Connections-Lan settings-Tick/untick ...) updated by
-
Version changed
Automatic ticket cleanup. - 7:25 AM Ticket #2951 (How to automate [Internet options-Connections-Lan settings-Tick/untick ...) created by
- Please help me as per th subject. I didnt find any help in this.
Nov 30, 2014:
- 6:40 PM Ticket #2943 (Disabled dummy control reacts on accelerators) updated by
-
Owner, Status changed
Point made. M23 - 1:28 AM Ticket #2943 (Disabled dummy control reacts on accelerators) updated by
- Quick example: […] I guess the dummy control always should have the same behaviour as its native counterparts. That's why I reported the wrong behavior from my first example.
- 1:21 AM Ticket #2943 (Disabled dummy control reacts on accelerators) updated by
-
But I can use and work with
GUICtrlSetStateandGUICtrlGetStateon Dummy Controls without any problems o.O
Note:
See TracTimeline
for information about the timeline view.
