Added 2 optional changes to the way the frames act when the surrounding GUI is changed in size:
1. Previously the frame minimum sizes set by _GUIFrame_SetMin were stored as a percentage of the initial GUI size - resizing the GUI changed the actual size of the minimum value to maintain the same percentage value. An additional parameter now allows you set an absolute value for these minima regardless of the size of the GUI. The top/left frame will always take priority if the GUI is reduced below the combined minimum sizes.
2. The separator bar did not move when the GUI was resized - you can now specify in the _GUIFrame_ResizeSet function whether either or neither frame should remain static when the GUI is resized.
These changes are not script-breaking as the new parameters are optional and the default behaviour of the UDF is very close to what you are used to seeing. Thanks to thewizard21 for asking for the new features.
New UDF and a new example below and in the zip.
Previous changes:
Spoiler
[NEW VERSION] - 24 Mar 12
The previous change introduced some unwanted behaviour so I have reverted the code as the bug in deep within the AutoIt core code and there seems no simple way to avoid the problem while also allowing controls to use accelerator letters in the titles. I believe that it is the lesser of the 2 evils to have non-draggable GUI as frames.
[NEW VERSION] - 4 Feb 12
Changed: Controls with accelerator letters in the titles (set by &) now work. Thanks to DicatoroftheUSA for reporting the problem and ProgAndy for coming up with the solution (and also pointing out a couple of typos).
As explained above this change has been reverted.
[NEW VERSION] - 20 Jan 12
Changed: Code amended to allow UDF to work on x64 systems with the 32bit AutoIt executable.
[NEW VERSION - 21 Dec 10] - New UDF code and zip
[New] - Now x64 compatible (thanks Yashied)
No requirement for any changes to existing scripts - the UDF automatically detects the correct form of DLLCall to make.
[NEW VERSION - 14 Dec 10] - New UDF code, examples and zip
[New] - Removal of the limit on child frames. You can now have as many as you can fit in!
[New] - Automatic exit clean up by using OnAutoItExitRegister to call the required function - no user action required.
[New] - Ability to get current separator position (_GUIFrame_GetSepPos) and to set the separator position programatically (_GUIFrame_SetSepPos) to permit GUI to be recreated as it was left - see examples for how to use them.
[NEW VERSION - 4 Nov 10] - Added user-defined intial position of separator bar within Frame. New UDF & example code and zip.
Warning: Script-breaking syntax change. You need to adjust the _GUIFrame_Create syntax if you used any parameters other than the separator orientation.
Sorry about that, but I felt keeping the various parameters in logical groups was more important.
[NEW VERSION - 27 Sep 10] - Fixed bug in resizing code (Thanks Beege 
). New UDF code and zip.
[NEW VERSION] - 24 Mar 12
The previous change introduced some unwanted behaviour so I have reverted the code as the bug in deep within the AutoIt core code and there seems no simple way to avoid the problem while also allowing controls to use accelerator letters in the titles. I believe that it is the lesser of the 2 evils to have non-draggable GUI as frames.
[NEW VERSION] - 4 Feb 12
Changed: Controls with accelerator letters in the titles (set by &) now work. Thanks to DicatoroftheUSA for reporting the problem and ProgAndy for coming up with the solution (and also pointing out a couple of typos).
As explained above this change has been reverted.
[NEW VERSION] - 20 Jan 12
Changed: Code amended to allow UDF to work on x64 systems with the 32bit AutoIt executable.
[NEW VERSION - 21 Dec 10] - New UDF code and zip
[New] - Now x64 compatible (thanks Yashied)
No requirement for any changes to existing scripts - the UDF automatically detects the correct form of DLLCall to make.
[New] - Removal of the limit on child frames. You can now have as many as you can fit in!
[New] - Automatic exit clean up by using OnAutoItExitRegister to call the required function - no user action required.
[New] - Ability to get current separator position (_GUIFrame_GetSepPos) and to set the separator position programatically (_GUIFrame_SetSepPos) to permit GUI to be recreated as it was left - see examples for how to use them.
Warning: Script-breaking syntax change. You need to adjust the _GUIFrame_Create syntax if you used any parameters other than the separator orientation.
Sorry about that, but I felt keeping the various parameters in logical groups was more important.
). New UDF code and zip.Before we start, my sincere thanks to Kip who wrote the first version of this UDF and who very kindly allowed me to build on it to produce this new version.
Many GUIs are divided into frames, where you can drag a separator bar to alter the relative sizes of the elements displayed within the GUI. Think of an Explorer window where the folder list is on one side and the files in the selected folder on the other - or SciTE with its editing and Director areas.
The GUIFrame UDF allows you to divide your own GUIs into 2 frames with a separator bar.
- The frames can be full-frame or set to a user-defined position and size within the GUI.
- The minimum size of each frame can be specified.
- The separator bar can be horizontal or vertical and its size and initial position set.
- The frames can resize as the main GUI resizes or can remain at their original position and size.
- You can even divide existing frames into further frames until you run out of space.
- x86 and x64 compatible. [New]
The frames themselves are normal AutoIt GUIs. You can colour them and create controls within them just as you would in any other script - functions are provided for easy navigation between them (think of GUISwitch).
Here is an example script to show the UDF working:
Spoiler
AutoIt
#include <guiconstantsex.au3> #include <windowsconstants.au3> #include "GUIFrame.au3" Global $iSep_Pos $hGUI = GUICreate("GUI_Frame Example 1", 500, 500, -1, -1, BitOR($WS_MINIMIZEBOX, $WS_MAXIMIZEBOX, $WS_SIZEBOX)) GUISetState() ; Create a 1st level frame $iFrame_A = _GUIFrame_Create($hGUI) _GUIFrame_SetMin($iFrame_A, 50, 100) _GUIFrame_Switch($iFrame_A, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetState(-1, $GUI_DISABLE) $hButton_1 = GUICtrlCreateButton("Pos Sep", 10, 10, 50, 30) ; Create a 2nd level frame $iFrame_B = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_A, 1), 1) GUISetBkColor(0x00FF00, _GUIFrame_GetHandle($iFrame_B, 1)) _GUIFrame_SetMin($iFrame_B, 100, 100) _GUIFrame_Switch($iFrame_B, 1) $hButton_2 = GUICtrlCreateButton("Pos Sep", 10, 10, 50, 30) ; Create a 3rd level frame $iFrame_C = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 2)) _GUIFrame_Switch($iFrame_C, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_C, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0D000) ; Create a 4th level frame $iFrame_D = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_C, 1), 1) _GUIFrame_Switch($iFrame_D, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0x00FFFF) _GUIFrame_Switch($iFrame_D, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF00FF) ; Set resizing flag for all created frames _GUIFrame_ResizeSet(0) ; Create a non-resizable 2nd level frame $iFrame_E = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 1), 0, 0, 5, 5, 55, 200, 100) _GUIFrame_Switch($iFrame_E, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF8000) _GUIFrame_Switch($iFrame_E, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0C0D0) ; Register the $WM_SIZE handler to permit resizing _GUIFrame_ResizeReg() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; The UDF does all the tidying up as you exit Exit Case $hButton_1 _GUIFrame_SetSepPos($iFrame_A, 300) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_A) GUICtrlSetData($hButton_1, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_1, "Sep Pos") Case $hButton_2 $iRet = _GUIFrame_SetSepPos($iFrame_B, 310) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_B) GUICtrlSetData($hButton_2, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_2, "Sep Pos") EndSwitch WEnd
The UDF uses the WM_SIZE message sent by the original GUIs to determine when to resize frames. If you want to register the same message within your script, you can still use this UDF. All you have to do is call a specific UDF function within your own message handler, as you can see here:
Spoiler
AutoIt
#include <guiconstantsex.au3> #include <windowsconstants.au3> #include "GUIFrame.au3" Global $iSep_Pos $hGUI = GUICreate("GUI_Frame Example 2", 500, 500, -1, -1, BitOR($WS_MINIMIZEBOX, $WS_MAXIMIZEBOX, $WS_SIZEBOX)) GUISetState() ; Register WM_SIZE to simulate the script requiring it GUIRegisterMsg($WM_SIZE, "_WM_SIZE") ; Create a 1st level frame $iFrame_A = _GUIFrame_Create($hGUI) _GUIFrame_SetMin($iFrame_A, 50, 100) _GUIFrame_Switch($iFrame_A, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetState(-1, $GUI_DISABLE) $hButton_1 = GUICtrlCreateButton("Sep Pos", 10, 10, 50, 30) ; Create a 2nd level frame $iFrame_B = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_A, 1), 1) GUISetBkColor(0x00FF00, _GUIFrame_GetHandle($iFrame_B, 1)) _GUIFrame_SetMin($iFrame_B, 100, 100) _GUIFrame_Switch($iFrame_B, 1) $hButton_2 = GUICtrlCreateButton("Pos Sep", 10, 10, 50, 30) ; Create a 3rd level frame $iFrame_C = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 2)) _GUIFrame_Switch($iFrame_C, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_C, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0D000) ; Create a 4th level frame $iFrame_D = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_C, 1), 1) _GUIFrame_Switch($iFrame_D, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0x00FFFF) _GUIFrame_Switch($iFrame_D, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF00FF) ; Set resizing flag for all created frames _GUIFrame_ResizeSet(0) ; Create a non-resizable 2nd level frame $iFrame_E = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 1), 0, 0, 5, 5, 55, 200, 100) _GUIFrame_Switch($iFrame_E, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF8000) _GUIFrame_Switch($iFrame_E, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0C0D0) ; DO NOT Register the $WM_SIZE handler to permit resizing as the message is already registered ;_GUIFrame_ResizeReg() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; The UDF does all the tidying up as you exit Exit Case $hButton_1 _GUIFrame_SetSepPos($iFrame_A, 300) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_A) GUICtrlSetData($hButton_1, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_1, "Sep Pos") Case $hButton_2 $iRet = _GUIFrame_SetSepPos($iFrame_B, 310) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_B) GUICtrlSetData($hButton_2, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_2, "Sep Pos") EndSwitch WEnd ; This is the already registered WM_SIZE handler Func _WM_SIZE($hWnd, $iMsg, $wParam, $lParam) ; Just call the GUIFrame resizing function here - do NOT use the _GUIFrame_ResizeReg function in the script _GUIFrame_SIZE_Handler($hWnd, $iMsg, $wParam, $lParam) Return "GUI_RUNDEFMSG" EndFunc
[New] An example to show how to set absolute/relative minimum frame sizes and the different behaviours available on GUI resizing:
Spoiler
AutoIt
#include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include "GUIFrame.au3" Global $iSep_Pos $hGUI = GUICreate("GUI_Frame Example 3", 500, 500, -1, -1, BitOR($WS_MINIMIZEBOX, $WS_MAXIMIZEBOX, $WS_SIZEBOX)) GUISetState() ; Create a 1st level frame $iFrame_A = _GUIFrame_Create($hGUI, 1) _GUIFrame_SetMin($iFrame_A, 50, 125, True) ; This line sets the minima as absolute values <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ;_GUIFrame_SetMin($iFrame_A, 50, 125) ; This line adjusts the minima to equivalent percentages on resizing <<<<<<<<<<<<<<<<<<<<< _GUIFrame_Switch($iFrame_A, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0x00FF00) GUICtrlCreateLabel("", 0, 0, 50, 50) GUICtrlSetBkColor(-1, 0x0000FF) GUICtrlSetResizing(-1, $GUI_DOCKSIZE) GUICtrlSetState(-1, $GUI_DISABLE) _GUIFrame_Switch($iFrame_A, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetState(-1, $GUI_DISABLE) ; Set resizing flag for all created frames _GUIFrame_ResizeSet(0, 2) ; Adjust the second parameter to change the resizing behaviour <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ; Register the $WM_SIZE handler to permit resizing _GUIFrame_ResizeReg() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; The UDF does all the tidying up as you exit Exit EndSwitch WEnd
[New] Here is the GUIFrame UDF itself:
Spoiler
AutoIt
#include-once ; #INDEX# ============================================================================================================ ; Title .........: GUIFrame ; AutoIt Version : 3.3 + ; Language ......: English ; Description ...: Splits a GUI into slideable and resizable 2 part frames which can be further split if required ; Remarks .......: - The UDF uses OnAutoItExitRegister to call _GUIFrame_Exit to delete subclassed separator bars ; using the UDF created WndProc and to release the Callback on exit ; - If the script already has a WM_SIZE handler then do NOT use _GUIFrame_ResizeReg, ; but call _GUIFrame_SIZE_Handler from within the existing handler ; Author ........: Original UDF by Kip ; Modified ......; This version by Melba23 - using x64 compatible code drawn from Yashied's WinAPIEx library ; ==================================================================================================================== ; #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7 ; #INCLUDES# ========================================================================================================= #include <WinAPI.au3> ; #GLOBAL VARIABLES# ================================================================================================= ; Array to hold handles for each frame set Global $aGF_HandleIndex[1][7] = [[0, 0, 0]] ; [0][0] = 0 ; Count of frames [0][1] = Move registered flag ; [n][0] = Parent GUI handle [n][4] = Original GUI handle ; [n][1] = First frame handle [n][5] = Indices of first frame internal frames ; [n][2] = Second frame handle [n][6] = Indices of second frame internal frames ; [n][3] = Separator bar handle ; Array to hold sizing percentages for each frame set Global $aGF_SizingIndex[1][8] ; [n][0] = First frame min [n][2] = X coord [n][4] = Width [n][6] = Seperator percentage position ; [n][1] = Second frame min [n][3] = Y coord [n][5] = Height [n][7] = Resize type (0/1/2) ; Array to hold other settings for each frame set Global $aGF_SettingsIndex[1][3] ; [n][0] = Separator orientation (vert/horz = 0/1) ; [n][1] = Resizable frame flag (0/1) ; [n][2] = Separator size (default = 5) ; Array to hold WinProc handles for each separator Global $aGF_SepProcIndex[1][2] = [[0, 0]] ; Store registered Callback handle Global $hGF_RegCallBack = DllCallbackRegister("_GUIFrame_SepWndProc", "lresult", "hwnd;uint;wparam;lparam") $aGF_SepProcIndex[0][1] = DllCallbackGetPtr($hGF_RegCallBack) ; #ONAUTOITEXIT FUNCTIONS# =========================================================================================== OnAutoItExitRegister("_GUIFrame_Exit") ; #CURRENT# ========================================================================================================== ; _GUIFrame_Create: Splits a GUI into 2 frames ; _GUIFrame_SetMin: Sets minimum sizes for each frame ; _GUIFrame_ResizeSet: Sets resizing flag for all or specified frame sets ; _GUIFrame_GetHandle: Returns the handle of a frame element (required for further splitting) ; _GUIFrame_Switch: Sets a frame element as current GUI ; _GUIFrame_GetSepPos: Returns the current position of the separator ; _GUIFrame_SetSepPos: Moves the separator bar to adjust frame sizes ; _GUIFrame_ResizeReg: Registers WM_SIZE message for resizing ; _GUIFrame_SIZE_Handler: Called from a WM_SIZE message handler to resize frames using _GUIFrame_Move ; ==================================================================================================================== ; #INTERNAL_USE_ONLY#================================================================================================= ; _GUIFrame_SepSubClass: Sets new WndProc for frame separator bar ; _GUIFrame_SepWndProc: New WndProc for frame separator bar ; _GUIFrame_SepPassMsg: Passes Msg to original frame WndProc for action ; _GUIFrame_Move: Moves and resizes frame elements and separator bars ; _GUIFrame_Exit: Deletes all subclassed separator bars to free UDF WndProc and frees registered callback handle ; ==================================================================================================================== ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_Create ; Description ...: Splits a GUI into 2 frames ; Syntax.........: _GUIFrame_Create($hWnd, $iSepOrient = 0, $iSepPos = 0, $iSepSize = 5, $iX = 0, $iY = 0, $iWidth = 0, $iHeight = 0, $iStyle = 0, $iExStyle = 0) ; Parameters ....: $hWnd - Handle of GUI to split ; $iSepOrient - Orientation of separator bar: 0 = Vertical (default), 1 = Horizontal ; $iSepPos - Required initial position of separator (default = centre of frame GUI) ; $iSepSize - Size of separator bar (default = 5, min = 3, max = 9) ; $iX - Left of frame area (default = 0) ; $iY - Top of frame area (default = 0) ; $iWidth - Width of frame area (default = full width) ; $iHeight - Height of frame area (default = full height) ; SiStyle - Required style value for frame elements ; SiExStyle - Required extended style value for frame elements ; Requirement(s).: v3.3 + ; Return values .: Success: Returns index number of frame/separator set ; Failure: Returns 0 and sets @error as follows: ; 1 = Child limit exceeded ; 2 = GUI creation failed ; 2 = Separator subclassing failed ; Author ........: Kip ; Modified ......: Melba23 ; Remarks .......: ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_Create($hWnd, $iSepOrient = 0, $iSepPos = 0, $iSepSize = 5, $iX = 0, $iY = 0, $iOrg_Width = 0, $iOrg_Height = 0, $iStyle = 0, $iExStyle = 0) Local $iSeperator_Pos, $hSeparator, $hFirstFrame, $hSecondFrame, $nSepPercent ; Set separator size Local $iSeparatorSize = 5 Switch $iSepSize Case 3 To 9 $iSeparatorSize = $iSepSize EndSwitch ; Set default sizing if no parameters set Local $iWidth = $iOrg_Width Local $iHeight = $iOrg_Height Local $aFullSize = WinGetClientSize($hWnd) If Not $iOrg_Width Then $iWidth = $aFullSize[0] If Not $iOrg_Height Then $iHeight = $aFullSize[1] ; Create parent GUI within client area Local $hParent = GUICreate("FrameParent", $iWidth, $iHeight, $iX, $iY, BitOR(0x40000000, $iStyle), $iExStyle, $hWnd) ; $WS_CHILD GUISetState(@SW_SHOW, $hParent) ; Confirm size of frame parent client area Local $aSize = WinGetClientSize($hParent) $iWidth = $aSize[0] $iHeight = $aSize[1] If $iSepOrient = 0 Then ; Set initial separator position $iSeperator_Pos = $iSepPos ; Adjust position if not within GUI or default set (=0) If $iSepPos > $iWidth Or $iSepPos < 1 Then $iSeperator_Pos = Round(($iWidth / 2) - ($iSeparatorSize / 2)) EndIf ; Create separator bar and force cursor change over separator $hSeparator = GUICreate("", $iSeparatorSize, $iHeight, $iSeperator_Pos, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUICtrlCreateLabel("", 0, 0, $iSeparatorSize, $iHeight, -1, 0x00000001) ; $WS_EX_DLGMODALFRAME GUICtrlSetCursor(-1, 13) GUISetState(@SW_SHOW, $hSeparator) ; Create the sizable frames $hFirstFrame = GUICreate("", $iSeperator_Pos, $iHeight, 0, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hFirstFrame) $hSecondFrame = GUICreate("", $iWidth - ($iSeperator_Pos + $iSeparatorSize), $iHeight, $iSeperator_Pos + $iSeparatorSize, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hSecondFrame) ; Set seperator position percentage $nSepPercent = $iSeperator_Pos / $iWidth Else $iSeperator_Pos = $iSepPos If $iSepPos > $iHeight Or $iSepPos < 1 Then $iSeperator_Pos = Round(($iHeight / 2) - ($iSeparatorSize / 2)) EndIf $hSeparator = GUICreate("", $iWidth, $iSeparatorSize, 0, $iSeperator_Pos, 0x40000000, -1, $hParent) ;$WS_CHILD GUICtrlCreateLabel("", 0, 0, $iWidth, $iSeparatorSize, -1, 0x01) ; $WS_EX_DLGMODALFRAME GUICtrlSetCursor(-1, 11) GUISetState(@SW_SHOW, $hSeparator) $hFirstFrame = GUICreate("", $iWidth, $iSeperator_Pos, 0, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hFirstFrame) $hSecondFrame = GUICreate("", $iWidth, $iHeight - ($iSeperator_Pos + $iSeparatorSize), 0, $iSeperator_Pos + $iSeparatorSize, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hSecondFrame) $nSepPercent = $iSeperator_Pos / $iHeight EndIf ; Check for error creating GUIs If $hParent = 0 Or $hSeparator = 0 Or $hFirstFrame = 0 Or $hSecondFrame = 0 Then ; Delete all GUIs and return error GUIDelete($hParent) GUIDelete($hSeparator) GUIDelete($hFirstFrame) GUIDelete($hSecondFrame) Return SetError(2, 0, 0) EndIf ; Subclass the separator If _GUIFrame_SepSubClass($hSeparator) = 0 Then ; If Subclassing failed then delete all GUIs and return error GUIDelete($hParent) GUIDelete($hSeparator) GUIDelete($hFirstFrame) GUIDelete($hSecondFrame) Return SetError(3, 0, 0) EndIf ; Create new lines in the storage arrays for this frame set Local $iIndex = $aGF_HandleIndex[0][0] + 1 ReDim $aGF_HandleIndex[$iIndex + 1][7] ReDim $aGF_SizingIndex[$iIndex + 1][8] ReDim $aGF_SettingsIndex[$iIndex + 1][3] ; Store this frame set handles/variables/defaults in the new lines $aGF_HandleIndex[0][0] = $iIndex $aGF_HandleIndex[$iIndex][0] = $hParent $aGF_HandleIndex[$iIndex][1] = $hFirstFrame $aGF_HandleIndex[$iIndex][2] = $hSecondFrame $aGF_HandleIndex[$iIndex][3] = $hSeparator $aGF_HandleIndex[$iIndex][4] = $hWnd $aGF_HandleIndex[$iIndex][5] = 0 $aGF_HandleIndex[$iIndex][6] = 0 $aGF_SizingIndex[$iIndex][0] = 0 $aGF_SizingIndex[$iIndex][1] = 0 $aGF_SizingIndex[$iIndex][6] = $nSepPercent $aGF_SettingsIndex[$iIndex][0] = $iSepOrient $aGF_SettingsIndex[$iIndex][1] = 0 $aGF_SettingsIndex[$iIndex][2] = $iSeparatorSize ; Store this frame index in parent line if parent is an existing frame For $i = 1 To $aGF_HandleIndex[0][0] - 1 If $aGF_HandleIndex[$i][1] = $hWnd Then If $aGF_HandleIndex[$i][5] = 0 Then $aGF_HandleIndex[$i][5] = $iIndex Else $aGF_HandleIndex[$i][5] &= "|" & $iIndex EndIf ExitLoop EndIf If $aGF_HandleIndex[$i][2] = $hWnd Then If $aGF_HandleIndex[$i][6] = 0 Then $aGF_HandleIndex[$i][6] = $iIndex Else $aGF_HandleIndex[$i][6] &= "|" & $iIndex EndIf ExitLoop EndIf Next ; Store coordinate and size fractions If $iX Then $aGF_SizingIndex[$iIndex][2] = $iX / $aFullSize[0] Else $aGF_SizingIndex[$iIndex][2] = 0 EndIf If $iY Then $aGF_SizingIndex[$iIndex][3] = $iY / $aFullSize[1] Else $aGF_SizingIndex[$iIndex][3] = 0 EndIf If $iOrg_Width Then $aGF_SizingIndex[$iIndex][4] = $iOrg_Width / $aFullSize[0] Else $aGF_SizingIndex[$iIndex][4] = 1 EndIf If $iOrg_Height Then $aGF_SizingIndex[$iIndex][5] = $iOrg_Height / $aFullSize[1] Else $aGF_SizingIndex[$iIndex][5] = 1 EndIf ; Switch back to main GUI GUISwitch($hWnd) ; Return the index for this frame Return $iIndex EndFunc ;==>_GUIFrame_Create ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_SetMin ; Description ...: Sets minimum sizes for frames ; Syntax.........: _GUIFrame_SetMin($iFrame, $iFirstMin = 0, $iSecondMin = 0, $fAbsolute = False) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iFirstMin - Min size of first (left/top) frame - max half size ; $iSecondMin - Min Size of second (right/bottom) frame - max half size ; $fAbsolute - True = Minima fixed when GUI resized ; - False = Minima adjusted on resize to equivalent percentage of new GUI size (default) ; Requirement(s).: v3.3 + ; Return values .: None ; Author ........: Melba23 based on some original code by Kip ; Modified ......: ; Remarks .......: If the frame is resized, these minima are adjusted accordingly unless $fAbsolute is set ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_SetMin($iFrame, $iFirstMin = 0, $iSecondMin = 0, $fAbsolute = False) ; Check for valid frame index If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return 0 ; Get size of parent Local $aSize = WinGetClientSize($aGF_HandleIndex[$iFrame][0]) ; Now check orientation and determine Local $iMax, $iFullSize If $aGF_SettingsIndex[$iFrame][0] = 0 Then $iMax = Floor(($aSize[0] / 2) - $aGF_SettingsIndex[$iFrame][2]) $iFullSize = $aSize[0] Else $iMax = Floor(($aSize[1] / 2) - $aGF_SettingsIndex[$iFrame][2]) $iFullSize = $aSize[1] EndIf ; Set minimums If $fAbsolute Then $aGF_SizingIndex[$iFrame][0] = Int($iFirstMin) $aGF_SizingIndex[$iFrame][1] = Int($iSecondMin) Else If $iFirstMin > $iMax Then $aGF_SizingIndex[$iFrame][0] = $iMax / $iFullSize Else $aGF_SizingIndex[$iFrame][0] = $iFirstMin / $iFullSize EndIf If $iSecondMin > $iMax Then $aGF_SizingIndex[$iFrame][1] = $iMax / $iFullSize Else $aGF_SizingIndex[$iFrame][1] = $iSecondMin / $iFullSize EndIf EndIf EndFunc ;==>_GUIFrame_SetMin ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_ResizeSet ; Description ...: Sets resizing flag for frames ; Syntax.........: _GUIFrame_ResizeSet($iFrame = 0[, $iType = 0]) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create (Default - 0 = all existing frames) ; $iType - Separator behaviour on GUI resize ; 0 = Frames retain percentage size (default) ; 1 = Top/left frame fixed size ; 2 = Bottom/right frame fixed size ; Requirement(s).: v3.3 + ; Return values .: Success: 2 - All existing frame flags set ; 1 - Specified flag set ; Failure: 0 with @error set to: ; 1 - Invalid frame specified ; 2 - Invalid type parameter ; Author ........: Melba23 ; Modified ......: ; Remarks .......: ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_ResizeSet($iFrame = 0, $iType = 0) Switch $iType Case 0, 1, 2 ; Valid Case Else Return SetError(2, 0, 0) EndSwitch Switch $iFrame Case 0 ; Set all frames For $i = 1 To $aGF_HandleIndex[0][0] $aGF_SettingsIndex[$i][1] = 1 $aGF_SizingIndex[$i][7] = $iType Next Return 2 Case 1 To $aGF_HandleIndex[0][0] ; Only valid frames accepted $aGF_SettingsIndex[$iFrame][1] = 1 $aGF_SizingIndex[$iFrame][7] = $iType Return 1 Case Else ; Error Return SetError(1, 0, 0) EndSwitch EndFunc ;==>_GUIFrame_ResizeSet ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_GetHandle ; Description ...: Returns the handle of a frame element (required for further splitting) ; Syntax.........: _GUIFrame_GetHandle($iFrame, $iElement) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iElement - 1 = first (left/top) frame, 2 = second (right/bottom) frame ; Requirement(s).: v3.3 + ; Return values .: Success: Handle of frame ; Failure: 0 with @error set as follows ; 1 - Invalid frame specified ; 2 - Invalid element specified ; Author ........: Kip ; Modified ......: Melba23 ; Remarks .......: _GUIFrame_Create requires a GUI handle as a parameter ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_GetHandle($iFrame, $iElement) ; Check valid frame index and element Switch $iFrame Case 1 To $aGF_HandleIndex[0][0] Switch $iElement Case 1, 2 ; Return handle Return $aGF_HandleIndex[$iFrame][$iElement] EndSwitch Return SetError(2, 0, 0) EndSwitch Return SetError(1, 0, 0) EndFunc ;==>_GUIFrame_GetHandle ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_Switch ; Description ...: Sets a frame element as current GUI ; Syntax.........: _GUIFrame_Switch($iFrame, $iElement) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iElement - 1 = first (left/top) frame, 2 = second (right/bottom) frame ; Requirement(s).: v3.3 + ; Return values .: None ; Author ........: Kip ; Modified ......: Melba23 ; Remarks .......: Subsequent controls are created in the specified frame element ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_Switch($iFrame, $iElement) ; Check valid frame index and element Switch $iFrame Case 1 To $aGF_HandleIndex[0][0] Switch $iElement Case 1, 2 ; Switch to specified element Return GUISwitch($aGF_HandleIndex[$iFrame][$iElement]) EndSwitch Return SetError(2, 0, 0) EndSwitch Return SetError(1, 0, 0) EndFunc ;==>_GUIFrame_Switch ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_GetSepPos() ; Description ...: Returns the current position of the separator ; Syntax.........: _GUIFrame_GetSepPos($iFrame) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; Requirement(s).: v3.3 + ; Return values .: Success: Position of separator ; Failure: -1 = Invalid frame specified ; Author ........: Melba23 ; Remarks .......: This value can be stored and used as the initial separator position parameter in _GUIFrame_Create ; to restore exit position on restart ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_GetSepPos($iFrame) Local $iSepPos ; Check for valid frame index If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return -1 ; Get position of first frame Local $aFrame_Pos = WinGetPos($aGF_HandleIndex[$iFrame][1]) ; Get position of separator Local $aSep_Pos = WinGetPos($aGF_HandleIndex[$iFrame][3]) ; Check on separator orientation If $aGF_SettingsIndex[$iFrame][0] Then $iSepPos = $aSep_Pos[1] - $aFrame_Pos[1] Else $iSepPos = $aSep_Pos[0] - $aFrame_Pos[0] EndIf Return $iSepPos EndFunc ;==>_GUIFrame_GetSepPos ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_SetSepPos() ; Description ...: Moves the separator bar to adjust frame sizes ; Syntax.........: _GUIFrame_SetSepPos($iFrame, $iSepPos) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iSepos - Position of separator bar within frame ; Requirement(s).: v3.3 + ; Return values .: Success: 1 ; Failure: 0 with @error set as follows ; 1 - Invalid frame specified ; 2 - Invalid separator position (outside frame) ; 3 - Invalid separator position (below frame minimum size) ; Author ........: Melba23 ; Remarks .......: This value can be stored and used as the initial separator position parameter in _GUIFrame_Create ; to restore exit position on restart ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_SetSepPos($iFrame, $iSepPos) Local $iFirstMin, $iSecondMin ; Check for valid frame index If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return SetError(1, 0, 0) ; Check separator actually needs to move If $iSepPos = _GUIFrame_GetSepPos($iFrame) Then Return 1 ; Get frame GUI size Local $aWinPos = WinGetPos($aGF_HandleIndex[$iFrame][0]) ; Depending on separator orientation If $aGF_SettingsIndex[$iFrame][0] Then ; Check sep position is valid If $iSepPos < 0 Or $iSepPos > $aWinPos[3] Then Return SetError(2, 0, 0) ; Determine minima for frames $iFirstMin = $aWinPos[3] * $aGF_SizingIndex[$iFrame][0] $iSecondMin = ($aWinPos[3] * (1 - $aGF_SizingIndex[$iFrame][1])) - $aGF_SettingsIndex[$iFrame][2] ; Check required value is valid If $iSepPos < $iFirstMin Or $iSepPos > $iSecondMin Then Return SetError(3, 0, 0) ; Move frames and seperator WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $aWinPos[2], $iSepPos) WinMove($aGF_HandleIndex[$iFrame][2], "", 0, $iSepPos + $aGF_SettingsIndex[$iFrame][2], $aWinPos[2], $aWinPos[3] - ($iSepPos + $aGF_SettingsIndex[$iFrame][2])) WinMove($aGF_HandleIndex[$iFrame][3], "", 0, $iSepPos, $aWinPos[2], $aGF_SettingsIndex[$iFrame][2]) Else If $iSepPos < 0 Or $iSepPos > $aWinPos[2] Then Return SetError(2, 0, 0) $iFirstMin = $aWinPos[2] * $aGF_SizingIndex[$iFrame][0] $iSecondMin = ($aWinPos[2] * (1 - $aGF_SizingIndex[$iFrame][1])) - $aGF_SettingsIndex[$iFrame][2] If $iSepPos < $iFirstMin Or $iSepPos > $iSecondMin Then Return SetError(3, 0, 0) WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $iSepPos, $aWinPos[3]) WinMove($aGF_HandleIndex[$iFrame][2], "", $iSepPos + $aGF_SettingsIndex[$iFrame][2], 0, $aWinPos[2] - ($iSepPos + $aGF_SettingsIndex[$iFrame][2]), $aWinPos[3]) WinMove($aGF_HandleIndex[$iFrame][3], "", $iSepPos, 0, $aGF_SettingsIndex[$iFrame][2], $aWinPos[3]) EndIf Return 1 EndFunc ;==>_GUIFrame_SetSepPos ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_ResizeReg ; Description ...: Registers WM_SIZE message for resizing ; Syntax.........: _GUIFrame_ResizeReg() ; Parameters ....: None ; Requirement(s).: v3.3 + ; Return values .: Success: 1 - Message handler registered ; Failure: 0 with @error set to 1 - Message handler already registered ; Author ........: Melba23 ; Modified ......: ; Remarks .......: ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_ResizeReg() ; Register the WM_SIZE message If $aGF_HandleIndex[0][1] = 0 Then Local $iRet = GUIRegisterMsg(0x05, "_GUIFrame_SIZE_Handler") ; $WM_SIZE If $iRet Then $aGF_HandleIndex[0][1] = 1 Return 1 EndIf EndIf Return SetError(1, 0, 0) EndFunc ;==>_GUIFrame_ResizeReg ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_SIZE_Handler ; Description ...: Used to resize frames when resizing of holding GUI occurs ; Syntax.........: _GUIFrame_SIZE_Handler($hWnd, $iMsg, $wParam, $lParam) ; Parameters ....: None ; Requirement(s).: v3.3 + ; Return values .: None ; Author ........: Melba23 ; Modified ......: ; Remarks .......: If the script already has a WM_SIZE handler, then just call this function from within it ; and do NOT use the _GUIFrame_ResizeReg function ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_SIZE_Handler($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam, $lParam Local $iIndex ; Get index of base frame GUI For $iIndex = 1 To $aGF_HandleIndex[0][0] If $aGF_HandleIndex[$iIndex][4] = $hWnd Then ExitLoop Next ; If handle not found If $iIndex > $aGF_HandleIndex[0][0] Then Return "GUI_RUNDEFMSG" ; Check if we should resize this set If $aGF_SettingsIndex[$iIndex][1] = 1 Then ; Get new base GUI size Local $aSize = WinGetClientSize($hWnd) ; Resize frames _GUIFrame_Move($iIndex, $aSize[0] * $aGF_SizingIndex[$iIndex][2], $aSize[1] * $aGF_SizingIndex[$iIndex][3], $aSize[0] * $aGF_SizingIndex[$iIndex][4], $aSize[1] * $aGF_SizingIndex[$iIndex][5]) ; Adjust any resizeable internal frames - array elements are adjacent for ease of coding For $i = 0 To 1 ; Adjust internal frames of first/second frame if any exist If $aGF_HandleIndex[$iIndex][5 + $i] <> 0 Then ; StringSplit the element content on "|" Local $aInternal = StringSplit($aGF_HandleIndex[$iIndex][5 + $i], "|") ; Then loop though the Number(values) found For $j = 1 To $aInternal[0] Local $iIntIndex = Number($aInternal[$j]) ; Check if internal frame is resizable If $aGF_SettingsIndex[$iIntIndex][1] = 1 Then ; And change if so _GUIFrame_SIZE_Handler($aGF_HandleIndex[$iIntIndex][4], $iMsg, $wParam, $lParam) EndIf Next EndIf Next EndIf Return "GUI_RUNDEFMSG" EndFunc ;==>_GUIFrame_SIZE_Handler ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_SepSubClass ; Description ...: Sets new WndProc for frame separator bar ; Author ........: Kip ; Modified.......: Melba23, using SetWindowLongPtr x64 compatible code drawn from Yashied's WinAPIEx library ; Remarks .......: This function is used internally by _GUIFrame_Create ; =============================================================================================================================== Func _GUIFrame_SepSubClass($hWnd) Local $aRet ; Check separator has not already been used For $i = 1 To $aGF_SepProcIndex[0][0] If $aGF_SepProcIndex[$i][0] = $hWnd Then Return 0 Next ; Store current WinProc handle in new array line Local $iIndex = $aGF_SepProcIndex[0][0] + 1 ReDim $aGF_SepProcIndex[$iIndex + 1][2] $aGF_SepProcIndex[0][0] = $iIndex $aGF_SepProcIndex[$iIndex][0] = $hWnd ; Subclass separator bar If @AutoItX64 Then $aRet = DllCall('user32.dll', 'long_ptr', 'SetWindowLongPtrW', 'hwnd', $hWnd, 'int', -4, 'long_ptr', $aGF_SepProcIndex[0][1]) ; $GWL_WNDPROC Else $aRet = DllCall('user32.dll', 'long', 'SetWindowLongW', 'hwnd', $hWnd, 'int', -4, 'long', $aGF_SepProcIndex[0][1]) ; $GWL_WNDPROC EndIf ; Check for subclassing error If @error Or $aRet[0] = 0 Then Return 0 ; Return success $aGF_SepProcIndex[$iIndex][1] = $aRet[0] Return 1 EndFunc ;==>_GUIFrame_SepSubClass ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_SepWndProc ; Description ...: New WndProc for frame separator bar ; Author ........: Kip ; Modified.......: Melba23 ; Remarks .......: This function is used internally by _GUIFrame_SepSubClass ; =============================================================================================================================== Func _GUIFrame_SepWndProc($hWnd, $iMsg, $wParam, $lParam) Local $iSubtract, $fAbsolute = False If $iMsg = 0x0111 Then ; WM_COMMAND ; Check if hWnd is a Separator bar For $iIndex = 1 To $aGF_HandleIndex[0][0] If $aGF_HandleIndex[$iIndex][3] = $hWnd Then ExitLoop Next ; If not then pass message on to org WndProc If $iIndex > $aGF_HandleIndex[0][0] Then Return _GUIFrame_SepPassMsg($hWnd, $iMsg, $wParam, $lParam) ; Extract values from array Local $hParent = $aGF_HandleIndex[$iIndex][0] Local $hFirstFrame = $aGF_HandleIndex[$iIndex][1] Local $hSecondFrame = $aGF_HandleIndex[$iIndex][2] Local $hSeparator = $aGF_HandleIndex[$iIndex][3] Local $iFirstMin = $aGF_SizingIndex[$iIndex][0] Local $iSecondMin = $aGF_SizingIndex[$iIndex][1] If $iFirstMin > 1 Or $iSecondMin > 1 Then $fAbsolute = True EndIf Local $iSeparatorSize = $aGF_SettingsIndex[$iIndex][2] ; Get client size of the parent Local $aClientSize = WinGetClientSize($hParent) Local $iWidth = $aClientSize[0] Local $iHeight = $aClientSize[1] ; Get cursor info for the Separator Local $aCInfo = GUIGetCursorInfo($hSeparator) ; Depending on separator orientation If $aGF_SettingsIndex[$iIndex][0] = 0 Then ; Get Separator X-coord $iSubtract = $aCInfo[0] Do ; Get parent X-coord $aCInfo = GUIGetCursorInfo($hParent) Local $iCursorX = $aCInfo[0] ; Determine width of first frame Local $iFirstWidth = $iCursorX - $iSubtract ; And ensure it is at least minimum If $fAbsolute Then If $iFirstWidth < $iFirstMin Then $iFirstWidth = $iFirstMin If $iWidth - $iFirstWidth - $iSeparatorSize < $iSecondMin Then $iFirstWidth = $iWidth - $iSeparatorSize - $iSecondMin Else If $iFirstWidth < $iWidth * $iFirstMin Then $iFirstWidth = $iWidth * $iFirstMin If $iWidth - ($iFirstWidth + $iSeparatorSize) < $iWidth * $iSecondMin Then $iFirstWidth = $iWidth - ($iWidth * $iSecondMin) - $iSeparatorSize EndIf ; Move the GUIs to the correct places WinMove($hFirstFrame, "", 0, 0, $iFirstWidth, $iHeight) WinMove($hSecondFrame, "", $iFirstWidth + $iSeparatorSize, 0, $iWidth - ($iFirstWidth + $iSeparatorSize), $iHeight) WinMove($hSeparator, "", $iFirstWidth, 0, $iSeparatorSize, $iHeight) ; Do until the mouse button is released Until Not _WinAPI_GetAsyncKeyState(0x01) ; Store current separator percentage position $aGF_SizingIndex[$iIndex][6] = $iFirstWidth / $iWidth ElseIf $aGF_SettingsIndex[$iIndex][0] = 1 Then $iSubtract = $aCInfo[1] Do $aCInfo = GUIGetCursorInfo($hParent) Local $iCursorY = $aCInfo[1] Local $iFirstHeight = $iCursorY - $iSubtract If $fAbsolute Then If $iFirstHeight < $iFirstMin Then $iFirstHeight = $iFirstMin If $iHeight - $iFirstHeight - $iSeparatorSize < $iSecondMin Then $iFirstHeight = $iHeight - $iSeparatorSize - $iSecondMin Else If $iFirstHeight < $iHeight * $iFirstMin Then $iFirstHeight = $iHeight * $iFirstMin If $iHeight - ($iFirstHeight + $iSeparatorSize) < $iHeight * $iSecondMin Then $iFirstHeight = $iHeight - ($iHeight * $iSecondMin) - $iSeparatorSize EndIf WinMove($hFirstFrame, "", 0, 0, $iWidth, $iFirstHeight) WinMove($hSecondFrame, "", 0, $iFirstHeight + $iSeparatorSize, $iWidth, $iHeight - ($iFirstHeight + $iSeparatorSize)) WinMove($hSeparator, "", 0, $iFirstHeight, $iWidth, $iSeparatorSize) Until Not _WinAPI_GetAsyncKeyState(0x01) $aGF_SizingIndex[$iIndex][6] = $iFirstHeight / $iHeight EndIf EndIf ; Pass the message on to org WndProc Return _GUIFrame_SepPassMsg($hWnd, $iMsg, $wParam, $lParam) EndFunc ;==>_GUIFrame_SepWndProc ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_SepPassMsg ; Description ...: Passes Msg to frame parent WndProc for action ; Author ........: Kip ; Modified.......: Melba23 ; Remarks .......: This function is used internally by _GUIFrame_SepWndProc ; =============================================================================================================================== Func _GUIFrame_SepPassMsg($hWnd, $iMsg, $wParam, $lParam) For $i = 1 To $aGF_SepProcIndex[0][0] If $aGF_SepProcIndex[$i][0] = $hWnd Then Return _WinAPI_CallWindowProc($aGF_SepProcIndex[$i][1], $hWnd, $iMsg, $wParam, $lParam) Next EndFunc ;==>_GUIFrame_SepPassMsg ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_Move ; Description ...: Moves and resizes frame elements and separator bars ; Author ........: Kip ; Modified.......: Melba23 ; Remarks .......: This function is used internally by _GUIFrame_SIZE_Handler ; =============================================================================================================================== Func _GUIFrame_Move($iFrame, $iX, $iY, $iWidth = 0, $iHeight = 0) If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return 0 Local $fAbsolute = False, $iDimension, $iActual_Size_1, $iActual_Size_2, $iSize Local $iOrientation = $aGF_SettingsIndex[$iFrame][0] Local $iSeparatorSize = $aGF_SettingsIndex[$iFrame][2] ; Set size if not specified If Not $iWidth Then $iWidth = _WinAPI_GetWindowWidth($aGF_HandleIndex[$iFrame][0]) If Not $iHeight Then $iHeight = _WinAPI_GetWindowHeight($aGF_HandleIndex[$iFrame][0]) ; Move parent WinMove($aGF_HandleIndex[$iFrame][0], "", $iX, $iY, $iWidth, $iHeight) ; Depending on separator orientation get required width/height values If $iOrientation = 1 Then $iDimension = $iHeight $iActual_Size_1 = _WinAPI_GetWindowHeight($aGF_HandleIndex[$iFrame][1]) $iActual_Size_2 = _WinAPI_GetWindowHeight($aGF_HandleIndex[$iFrame][2]) Else $iDimension = $iWidth $iActual_Size_1 = _WinAPI_GetWindowWidth($aGF_HandleIndex[$iFrame][1]) $iActual_Size_2 = _WinAPI_GetWindowWidth($aGF_HandleIndex[$iFrame][2]) EndIf ; Check resize type required Switch $aGF_SizingIndex[$iFrame][7] Case 0 ; Determine new size for first frame using separator position percentage $iSize = Int($iDimension * $aGF_SizingIndex[$iFrame][6]) Case 1 ; Get current fixed first frame size $iSize = $iActual_Size_1 Case 2 ; Determine new first frame size with fixed second frame size $iSize = $iDimension - $iSeparatorSize - $iActual_Size_2 EndSwitch ; Set frame min percentages Local $iFirstMin = $aGF_SizingIndex[$iFrame][0] Local $iSecondMin = $aGF_SizingIndex[$iFrame][1] If $iFirstMin > 1 Or $iSecondMin > 1 Then $fAbsolute = True EndIf ; Check for minimum size of first frame Local $iAdjust_Other = True Local $fSep_Adjusted = False ; Adjust first frame size If $fAbsolute Then If $iSize < $iFirstMin Then $iSize = $iFirstMin $iAdjust_Other = False $fSep_Adjusted = True EndIf Else If $iSize < $iDimension * $iFirstMin Then $iSize = $iDimension * $iFirstMin $iAdjust_Other = False $fSep_Adjusted = True EndIf EndIf ; Now adjust second frame if first not adjusted If $iAdjust_Other Then ; Find max available size for this frame Local $iSecondMax = $iDimension - $iFirstMin - $iSeparatorSize If $iSecondMax < $iSecondMin Then $iSecondMin = $iSecondMax EndIf ; Adjust second frame size If $fAbsolute Then If $iActual_Size_2 < $iSecondMin Then $iSize = $iDimension - $iSecondMin - $iSeparatorSize $fSep_Adjusted = True EndIf Else If $iActual_Size_2 < $iDimension * $iSecondMin Then $iSize = $iDimension - ($iDimension * $iSecondMin) - $iSeparatorSize $fSep_Adjusted = True EndIf EndIf EndIf ; If the separator has been moved programatically then reset percentage size of first frame If $fSep_Adjusted Then $aGF_SizingIndex[$iFrame][6] = $iSize / $iDimension EndIf ; Move and resize GUIs according to orientation If $iOrientation = 1 Then WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $iWidth, $iSize) WinMove($aGF_HandleIndex[$iFrame][2], "", 0, $iSize + $iSeparatorSize, $iWidth, $iHeight - $iSize - $iSeparatorSize) WinMove($aGF_HandleIndex[$iFrame][3], "", 0, $iSize, $iWidth, $iSeparatorSize) Else WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $iSize, $iHeight) WinMove($aGF_HandleIndex[$iFrame][2], "", $iSize + $iSeparatorSize, 0, $iWidth - $iSize - $iSeparatorSize, $iHeight) WinMove($aGF_HandleIndex[$iFrame][3], "", $iSize, 0, $iSeparatorSize, $iHeight) EndIf EndFunc ;==>_GUIFrame_Move ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_Exit() ; Description ...: Deletes all subclassed separator bars to free UDF WndProc and frees registered callback handle ; Author ........: Melba23 ; Remarks .......: Called by OnAutoItExitRegister to delete all subclassed separator bars and to free the UDF created WndProc. ; Example........: Yes ;================================================================================================================================ Func _GUIFrame_Exit() ; Delete all subclassed separator bars For $i = $aGF_HandleIndex[0][0] To 1 Step -1 GUIDelete($aGF_HandleIndex[$i][3]) Next ; Free registered Callback handle DllCallbackFree($hGF_RegCallBack) EndFunc ;==>_GUIFrame_Exit
[New] And finally all 4 files in zip format:
GUIFrame.zip 9.81K
719 downloadsI hope you find this UDF useful. As always brickbats and bouquets welcomed.
M23
Edited by Melba23, 24 April 2012 - 11:09 AM.
