destination ower write !!HELP!!

[Guest AX5]

I got a map named files and on this script i want to over write the file in map file to a destination and it needs to use

$Button2 = GUICtrlCreateButton("Over write", 40, 120, 100, 25, $WS_GROUP)

Edited December 21, 2009 by AX5

[GEOSoft 64]

Solution = Look elsewhere in your code because the portion you provided us with is just fine. Although I see no reason for the $WS_GROUP style from what you are showing.

Edited December 21, 2009 by GEOSoft

[Melba23 2,837]

George,

Every Koda generated script I have seen has the $WS_GROUP style in the button lines. Goodness knows why!

M23

[GEOSoft 64]

Thanks for the info M23. That's total nonsense and I'll just add it to my list of things I don't like about Koda.

[Guest AX5]

I was looking for this code. Thx all

$b = True
If $b = True Then FileInstall("C:\test.bmp", "D:\mydir\test.bmp")

[trancexx 927]

I saw what you deleted.

You need to read more. And try to comprehend read.

[Guest AX5]

I saw what you deleted.

You need to read more. And try to comprehend read.

Im trying doing my best

I thing that i cant fix...

I want this script to the button so wan u press the button the scripts starts

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("0000", 323, 512, 192, 124)
$Button1 = GUICtrlCreateButton("Steg 1", 184, 128, 113, 33, $WS_GROUP)
$Button2 = GUICtrlCreateButton("Steg 2", 184, 216, 113, 33, $WS_GROUP)
$Button3 = GUICtrlCreateButton("Steg 3", 184, 304, 113, 33, $WS_GROUP)
$Button4 = GUICtrlCreateButton("Steg 4", 184, 392, 113, 33, $WS_GROUP)
$Label1 = GUICtrlCreateLabel("4", 40, 32, 244, 65)
$Label2 = GUICtrlCreateLabel("3", 32, 112, 140, 65)
$Label3 = GUICtrlCreateLabel("2", 32, 200, 140, 65)
$Label4 = GUICtrlCreateLabel("1", 32, 288, 140, 65)
$Label5 = GUICtrlCreateLabel("0", 32, 376, 140, 125)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
 Run("Notepad.exe", $Button1)

EndSwitch
WEnd

All the buttons most run 1 files each button

Button 1

Run("files\executable\step1.exe", "")

Button 2

Run("files\executable\step2.exe", "")

Button 3

Run("files\executable\step3.exe", "")

Edited December 21, 2009 by AX5

[Guest AX5]

Or this code

$rc = _RunDos("start files/1.exe")

[AdmiralAlkex 119]

1. Open helpfile.

2. Find "GUI Reference".

3. Read.

4. Drink whiskey milk.

5. Use the knowledge you now have to fix your script.

6. Goto 10.

7. Finished.

Can you guess which two steps are voluntary?

Edit: forgot something...

Edited December 22, 2009 by AdmiralAlkex

[Guest AX5]

1. Open helpfile.

2. Find "GUI Reference".

3. Read.

4. Drink whiskey milk.

5. Use the knowledge you now have to fix your script.

6. Goto 10.

7. Finished.

Can you guess which two steps are voluntary?

Edit: forgot something...

Cant find it plz help, Howe do i make the buttons work whit the script

Edited December 22, 2009 by AX5

[GEOSoft 64]

Do tou read too fast or not at all? What you need is in that help file several times.

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

   $Form1 = GUICreate("0000", 323, 512, 192, 124)
   $Button1 = GUICtrlCreateButton("Steg 1", 184, 128, 113, 33)
   $Button2 = GUICtrlCreateButton("Steg 2", 184, 216, 113, 33)
   $Button3 = GUICtrlCreateButton("Steg 3", 184, 304, 113, 33)
   $Button4 = GUICtrlCreateButton("Steg 4", 184, 392, 113, 33)
   $Label1 = GUICtrlCreateLabel("4", 40, 32, 244, 65)
   $Label2 = GUICtrlCreateLabel("3", 32, 112, 140, 65)
   $Label3 = GUICtrlCreateLabel("2", 32, 200, 140, 65)
   $Label4 = GUICtrlCreateLabel("1", 32, 288, 140, 65)
   $Label5 = GUICtrlCreateLabel("0", 32, 376, 140, 125)
   GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
   $nMsg = GUIGetMsg()
   Switch $nMsg
      Case $GUI_EVENT_CLOSE
         Exit
         Run("Notepad.exe")
      Case $Button1
         Run("files\executable\step1.exe")
      Case $Button2
         ;; Do something
   EndSwitch
WEnd

Add Case statements for the other two buttons as well.

[Guest AX5]

Do tou read too fast or not at all? What you need is in that help file several times.

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

   $Form1 = GUICreate("0000", 323, 512, 192, 124)
   $Button1 = GUICtrlCreateButton("Steg 1", 184, 128, 113, 33)
   $Button2 = GUICtrlCreateButton("Steg 2", 184, 216, 113, 33)
   $Button3 = GUICtrlCreateButton("Steg 3", 184, 304, 113, 33)
   $Button4 = GUICtrlCreateButton("Steg 4", 184, 392, 113, 33)
   $Label1 = GUICtrlCreateLabel("4", 40, 32, 244, 65)
   $Label2 = GUICtrlCreateLabel("3", 32, 112, 140, 65)
   $Label3 = GUICtrlCreateLabel("2", 32, 200, 140, 65)
   $Label4 = GUICtrlCreateLabel("1", 32, 288, 140, 65)
   $Label5 = GUICtrlCreateLabel("0", 32, 376, 140, 125)
   GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
   $nMsg = GUIGetMsg()
   Switch $nMsg
      Case $GUI_EVENT_CLOSE
         Exit
         Run("Notepad.exe")
      Case $Button1
         Run("files\executable\step1.exe")
      Case $Button2
         ;; Do something
   EndSwitch
WEnd

Add Case statements for the other two buttons as well.

thx man love you (Not in a gay way) Your the best the program works now

[failedtocompile 0]

thx man love you (Not in a gay way) Your the best the program works now

/giggle

[Guest AX5]

Now i did int get an answer to my other problem.

I have this script and i want it to change the Procces speed on a specific program

In the slide bar i want so you can change the speed from 1 - 10 and make the speed use a program to do this on and event make it use Add speed button

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Speed ", 230, 179, 253, 154)
$Input1 = GUICtrlCreateInput("C:\wer35.exe", 40, 40, 150, 21)
$Slider1 = GUICtrlCreateSlider(55, 66, 121, 30)
$Add = GUICtrlCreateButton("Add Speed", 65, 112, 100, 28)
$Pic1 = GUICtrlCreatePic("img/soft01-s.jpg", 0, 0, 230, 177, BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE

            Exit

    EndSwitch
WEnd