Sign in to follow this  
Followers 0
madasraka

Function repeats its self after completion.

10 posts in this topic

#1 ·  Posted (edited)

Can someone tell me what would possibly make this function to repeat its self when its completed ?

Function is called from 1st script as

While 1
        $nMsg = GUIGetMsg()
    Switch $nMsg
        case $Backup
        $ReadMaterialLibrary = GUICtrlRead ($MaterialLibrary)
            If $ReadMaterialLibrary = $GUI_CHECKED Then
                BackupMaterialLibrary()
                MsgBox(0,'','Loader backup function completed.')
;why does it get back to BackupMaterialLibrary() after this msgbox ????????
            EndIf
    EndSwitch
WEnd

And here is the function its self located inseparate .au3 file which is included in main script.

Global $OSbit, $progress,$Edit ;Refferenced from main script
Func BackupMaterialLibrary()
    $Backup = (@ScriptDir & "\Saved\MaterialLibrary")
    DirCreate ($Backup)
    If $OSbit = "X64" Then
        $MaterialLibraryPath = (@HomeDrive & "\Program Files (x86)\Common Files\Autodesk Shared\Materials2011")
        $CMD = Run (@ComSpec & ' /c xcopy /E/D/Y/H/R/C  "' & $MaterialLibraryPath & '" "' & $Backup & '"')
        $Size = DirGetSize ($MaterialLibraryPath)
            For $i = 1 to $Size step 1
            $GetBackupSize = DirGetSize ($Backup)
            $RoundResult = Round ($GetBackupSize*100/$Size)
            GUICtrlSetData ($progress,$RoundResult)
            GUICtrlSetData ($Edit,"Saving/Updating Material library" & @CRLF & Round($GetBackupSize / 1024 / 1024) & "MB out of " & Round($size / 1024 / 1024) & "MB copied. Done" & $RoundResult & "%")
                If $RoundResult = 100 Then
                    Msgbox(0,"","Copy 100% Done")
                    ExitLoop
                ElseIf $RoundResult < 100 Then
                    $CheckCMDRunStatus = ProcessExists ($CMD)
                    If $CheckCMDRunStatus = 0 Then
                        MsgBox(0,'','CMD exited, Exiting loop')
                        ExitLoop
                    ElseIf $CheckCMDRunStatus > 0 Then
                        ;ContinueLoop
                    EndIf
                EndIf
            Next
    ElseIf $OSbit = "X86" Then
        $MaterialLibraryPath = (@HomeDrive & "\Program Files\Common Files\Autodesk Shared\Materials2011")
        $CMD = Run (@ComSpec & ' /c xcopy /E/D/Y/H/R/C  "' & $MaterialLibraryPath & '" "' & $Backup & '"')
            For $i = 1 to $Size step 1
            $GetBackupSize = DirGetSize ($Backup)
            $RoundResult = Round ($GetBackupSize*100/$Size)
            GUICtrlSetData ($progress,$RoundResult)
            GUICtrlSetData ($Edit,"Saving/Updating Material library" & @CRLF & Round($GetBackupSize / 1024 / 1024) & "MB out of " & Round($size / 1024 / 1024) & "MB copied. Done" & $RoundResult & "%")
                If $RoundResult = 100 Then
                    Msgbox(0,"","Copy 100% Done")
                    ExitLoop
                ElseIf $RoundResult < 100 Then
                    $CheckCMDRunStatus = ProcessExists ($CMD)
                    If $CheckCMDRunStatus = 0 Then
                        MsgBox(0,'','CMD exited, Exiting loop')
                        ExitLoop
                    ElseIf $CheckCMDRunStatus > 0 Then
                        ;ContinueLoop
                    EndIf
                EndIf
            Next
    EndIf
EndFunc

I just cant find the answer.

I am confused.

Edited by madasraka

Share this post


Link to post
Share on other sites



#2 ·  Posted (edited)

I can't see anything in the function that causes it to recurse. You're probably looping the

If $Var = $GUI_CHECKED Then
BackupMaterialLibrary()
Endif

in the wrong way, but unless you post more code (or a reproducer, short and runnable) we can't really know that :)

Edit: I posted while you edited :(, but we still don't know what $Backup and $Var is!

Edit2: ... If $MaterialLibrary is a CheckBox then read the helpfile again, you shouldn't check if it's checked like that.

Edited by AdmiralAlkex

Share this post


Link to post
Share on other sites

... and, as you've observed (your edit shows so) the ContinueLoop isn't guilty. It isn't even necessary, just as you see, and the ElseIf where it was isn't either. These are No-Ops in your code.

Now lacking outer code like AdmiralAlex said, it's hard to tell. Is it recursing or called in sequence?


This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Share this post


Link to post
Share on other sites

#4 ·  Posted (edited)

Sorry guys i should have posted it but didnt because it was kinda (if not big) to many lines to look at.

Well, here it is

#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_icon=icon.ico
#AutoIt3Wrapper_outfile=../3DsMax_2011 Loader.exe
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_Res_Comment=comments
#AutoIt3Wrapper_Res_Description=description
#AutoIt3Wrapper_Res_Fileversion=0.0.0.0
#AutoIt3Wrapper_Res_LegalCopyright=copyright
#AutoIt3Wrapper_Res_Language=1033
#AutoIt3Wrapper_Res_requestedExecutionLevel=requireAdministrator
#AutoIt3Wrapper_Res_Icon_Add=F:\Danger\Savers fixers\Programs\3dsmax2011_licencebackup\Source\folder.ico
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <Constants.au3>
#include <GUIConstantsEx.au3>
#include <ProgressConstants.au3>
#include <WindowsConstants.au3>
    #include <buttonrestore.au3>
    #include <buttonbackup.au3>
    #include <buttonstart.au3>
    #include <buttonshortcut.au3>
    #include <service version check.au3>
        #include <RestoreLicense.au3>
        #include <RestoreLicenseService.au3>
        #include <RestoreSettings.au3>
        #include <RestoreMaterialLibrary.au3>
        #include <RestoreBackBurner.au3>
            #include <BackupLicense.au3>
            #include <BackupLicenseService.au3>
            #include <BackupSettings.au3>
            #include <BackupMaterialLibrary.au3>
            #include <BackupBackBurner.au3>
;DllCall("kernel32.dll", "int", "Wow64DisableWow64FsRedirection", "int", 1)
Opt("TrayOnEventMode",1)
Opt("TrayMenuMode",1)

$settingsitem   = TrayCreateMenu("Max Priority")
TrayCreateItem("Low",$settingsitem,"",1)
TrayItemSetOnEvent(-1,"PriorityLow") ;About is the function name
TrayCreateItem("Normal",$settingsitem)
TrayItemSetOnEvent(-1,"PriorityNormal") ;About is the function name
TrayCreateItem("HIgh",$settingsitem)
TrayItemSetOnEvent(-1,"PriorityHIgh") ;About is the function name

TrayCreateItem("About")
TrayItemSetOnEvent(-1,"AboutFunction") ;About is the function name
TrayCreateItem("Exit")
TrayItemSetOnEvent(-1,"ExitFunction") ;About is the function name
TraySetState()

IsAdmin ( )

$3DS_Bit32 = FileExists (@ScriptDir & "\Saved\Vista\User\AppData\Local\Autodesk\3dsmax\2011 - 32bit")
$3DS_Bit64 = FileExists (@ScriptDir & "\Saved\Vista\User\AppData\Local\Autodesk\3dsmax\2011 - 64bit")
$OS = @OSVersion
$OSbit = @OSArch

FileInstall ("instsrv.exe",@TempDir & "\instsrv.exe",1)
FileInstall ("icon.ico",@TempDir & "\icon.ico",1)
TraySetIcon (@TempDir & "\icon.ico",1)
$Form1 = GUICreate("Max Loader",260,400)
$progress = GUICtrlCreateProgress(0,120,260,20)
$Backup = GUICtrlCreateButton ("BACKUP",0,0,60,40)
GUICtrlSetTip ($Backup, "Save's 3dsmax license/registration/activation/settings")
$Restore = GUICtrlCreateButton ("RESTORE",200,0,60,40)
GUICtrlSetTip ($Restore, "Restore's 3dsmax license/registration/activation/settings")
$Run = GUICtrlCreateButton ("START 3DS MAX",0,40,260,40)
GUICtrlSetTip ($Run, "Run's 3dsmax")
$Shortcut = GUICtrlCreateButton ("Create Desktop Shortcut",0,80,260,40)
GUICtrlSetTip ($Shortcut, "Create's shorctut to 3dsmax.exe on your Desktop")

GUICtrlCreateGroup ("Components to Save and/or Restore",5,140,250,70)
$License = GUICtrlCreateCheckbox ("License",10,160)
$LicenseService = GUICtrlCreateCheckbox ("License Service",10,180)
$Settings = GUICtrlCreateCheckbox ("Setting's",90,160)
$MaterialLibrary = GUICtrlCreateCheckbox ("Material library",160,160)
$BackBurner = GUICtrlCreateCheckbox ("BackBurner",160,180)
GUICtrlCreateGroup ("Log",5,220,250,160)
$Edit = GUICtrlCreateEdit ("",10,240,240,130)

Global $OSbit, $progress
#Region ifs
if $OS = "WIN_XP" And $OSbit = "X86" and $3DS_Bit32 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows XP 32bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 32bit",60,16)
    Elseif $OS = "WIN_XP" And $OSbit = "X64" and $3DS_Bit32 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows XP 64bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 32bit",60,16)
    Elseif $OS = "WIN_XP" And $OSbit = "X86" and $3DS_Bit64 = 1 Then
$osinfo = GUICtrlCreateLabel ("Max will not work",60,0)
    Elseif $OS = "WIN_XP" And $OSbit = "X64" and $3DS_Bit64 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows XP 64bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 64bit",60,16)
;7
    Elseif $OS = "WIN_7" And $OSbit = "X86" and $3DS_Bit32 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows 7 32bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 32bit",60,16)
    Elseif $OS = "WIN_7" And $OSbit = "X64" and $3DS_Bit32 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows 7 64bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 32bit",60,16)
    Elseif $OS = "WIN_7" And $OSbit = "X86" and $3DS_Bit64 = 1 Then
$osinfo = GUICtrlCreateLabel ("Max will not work",60,0)
    Elseif $OS = "WIN_7" And $OSbit = "X64" and $3DS_Bit64 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows 7 64bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 64bit",60,16)
;Vista
    Elseif $OS = "WIN_Vista" And $OSbit = "X86" and $3DS_Bit32 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows Vista 32bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 32bit",60,16)
    Elseif $OS = "WIN_Vista" And $OSbit = "X64" and $3DS_Bit32 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows Vista 64bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 32bit",60,16)
    Elseif $OS = "WIN_Vista" And $OSbit = "X86" and $3DS_Bit64 = 1 Then
$osinfo = GUICtrlCreateLabel ("Max will not work",60,0)
    Elseif $OS = "WIN_Vista" And $OSbit = "X64" and $3DS_Bit64 = 1 Then
$osinfo = GUICtrlCreateLabel ("Windows Vista 64bit",60,0)
$maxinfo = GUICtrlCreateLabel ("3DS MAX 2010 64bit",60,16)
    Else
$osinfo = GUICtrlCreateLabel ("         Place loader into" & @CRLF & "          3DS MAX Root",60,0)
EndIf
#EndRegion ifs

serviceversion() ;check for service version
GUISetState(@SW_SHOW)
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        case $Backup
            GUISetState(@SW_LOCK,$Form1)
            $ReadLicense = GUICtrlRead ($License)
            $ReadLicenseService = GUICtrlRead ($LicenseService)
            $ReadSettings = GUICtrlRead ($Settings)
            $ReadMaterialLibrary = GUICtrlRead ($MaterialLibrary)
            $ReadBackBurner = GUICtrlRead ($BackBurner)

            If $ReadLicense = $GUI_CHECKED Then
                BackupLicense()
            EndIf
            If $ReadLicenseService = $GUI_CHECKED Then
                BackupLicenseService()
            EndIf
            If $ReadSettings = $GUI_CHECKED Then
                BackupSettings()
            EndIf
            If $ReadMaterialLibrary = $GUI_CHECKED Then
                BackupMaterialLibrary()
                MsgBox(0,'','Loader backup function completed.')
            EndIf
            If $ReadBackBurner = $GUI_CHECKED Then
                BackupBackBurner()
            EndIf
            GUISetState(@SW_UNLOCK,$Form1)

        case $Restore
            GUISetState(@SW_LOCK,$Form1)
            $ReadLicense = GUICtrlRead ($License)
            $ReadLicenseService = GUICtrlRead ($LicenseService)
            $ReadSettings = GUICtrlRead ($Settings)
            $ReadMaterialLibrary = GUICtrlRead ($MaterialLibrary)
            $ReadBackBurner = GUICtrlRead ($BackBurner)

                If $ReadLicense = $GUI_CHECKED Then
                    RestoreLicense()
                EndIf
                If $ReadLicenseService = $GUI_CHECKED Then
                    RestoreLicenseService()
                EndIf
                If $ReadSettings = $GUI_CHECKED Then
                    RestoreSettings()
                EndIf
                If $ReadMaterialLibrary = $GUI_CHECKED Then
                    RestoreMaterialLibrary()
                EndIf
                If $ReadBackBurner = $GUI_CHECKED Then
                    RestoreBackBurner()
                EndIf
                    GUISetState(@SW_UNLOCK,$Form1)
        case $Run
            GUISetState(@SW_HIDE)
            buttonstart()
        case $Shortcut
            shortcut()
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
WEnd




Func PriorityLow()
ProcessSetPriority ( "3dsmax.exe",0)
EndFunc
Func PriorityNormal()
ProcessSetPriority ( "3dsmax.exe",2)
EndFunc
Func PriorityHIgh()
ProcessSetPriority ( "3dsmax.exe",4)
EndFunc

Func AboutFunction()
   MsgBox(0,"Information","3ds max 2011 Saver/Fixer V1.0.0")
   EndFunc

   Func ExitFunction()
       $askexit = MsgBox(4,"Question","Close Loader and keep 3ds max running ?")
       If $askexit = 6 Then
       Exit
   ElseIf $askexit = 7 Then
       EndIf
       EndFunc

As for checkbox:

From help file:

For Checkbox, Radio control several states can be returned as $GUI_FOCUS and $GUI_CHECKED,. So use i.e. BitAnd(GUICtrlRead($Item),$GUI_CHECKED) to test if the control is checked.

thats all i could find helpful.

Thank you guys for trying to help. I cant wait to find a solution so i can continue working on rest of functions.

I attached full source code so u guys can test it your self.

#1 execute 3DsMax_2011 Loader.au3

#2 Check box with material library

#3 press Backup button.

Once selected (with checkbox )backup function finished it repeats again and i dont understand why it does that.

Edit:

I simplified main and backup function code to have it working without editing anything.

Someone p[lease have a look at those 2

Main.au3BackupMaterialLibrary.au3

Simply press Backup Button and see for your self.

It will start copying all program files folder into newly created folder so if u want to stop it, simply close CMD windows.

Thanks for help and time spared.

Edited by madasraka

Share this post


Link to post
Share on other sites

I have simplified code as much as possible and still unable to stop function from repeating its self.

#RequireAdmin
#include <Constants.au3>
#include <GUIConstantsEx.au3>
#include <ProgressConstants.au3>
#include <WindowsConstants.au3>

$OS = @OSVersion
$OSbit = @OSArch

$Form1 = GUICreate("Max Loader",260,400)
$MaterialLibrary = GUICtrlCreateCheckbox ("Material library",160,15)
GUICtrlSetState ($MaterialLibrary,$GUI_CHECKED)
$Backup = GUICtrlCreateButton ("Backup",10,140,60,20)
$progress = GUICtrlCreateProgress(70,140,120,20)

GUICtrlCreateGroup ("Log",5,230,250,160) ;Group
$Edit = GUICtrlCreateEdit ("",10,250,240,130)

GUISetState(@SW_SHOW)
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        case $Backup
            BackupMaterialLibrary()
            MsgBox(0,'','backup function completed.')
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
WEnd


Func BackupMaterialLibrary()
    $Backup = (@ScriptDir & "\Saved\MaterialLibrary")
    DirCreate ($Backup)
        $MaterialLibraryPath = (@HomeDrive & "\Program Files (x86)\Internet Explorer")
        $CMD = Run (@ComSpec & ' /c xcopy /E/D/Y/H/R/C  "' & $MaterialLibraryPath & '" "' & $Backup & '"')
        $Size = DirGetSize ($MaterialLibraryPath)
            For $i = 1 to $Size
                $GetBackupSize = DirGetSize ($Backup)
                $RoundResult = Round ($GetBackupSize*100/$Size)
                If $RoundResult = 100 Then
                MsgBox(0,'','finished')
                exitloop
                EndIf
            Next
EndFunc

I think it has something to do with 'For" but i am not very familiar with it and i need help figuring out why BackupMaterialLibrary() is constantly executed after it finished its job once button is pressed.

Share this post


Link to post
Share on other sites

Well now I see it, you have your main-loop check for $Backup, which is the button at the beginning, but then you use the same variable to hold @ScriptDir & "\Saved\MaterialLibrary", so now you basically have:

$nMsg = GUIGetMsg()
    Switch $nMsg
        case @ScriptDir & "\Saved\MaterialLibrary"

And that messes things up quite a bit.

Also, I think you should use RunWait() instead of Run() and that weird loop. Something like this:

#include <GUIConstantsEx.au3>

$Form1 = GUICreate("Max Loader",260,400)
$Backup = GUICtrlCreateButton ("Backup",10,140,60,20)

GUISetState(@SW_SHOW)
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $Backup
            BackupMaterialLibrary()
            MsgBox(0,'','backup function completed.')
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
WEnd

Func BackupMaterialLibrary()
    $BackupPath = (@ScriptDir & "\Saved\MaterialLibrary")
    DirCreate ($BackupPath)
    $MaterialLibraryPath = (@HomeDrive & "\Program Files (x86)\Internet Explorer")
    $CMD = RunWait (@ComSpec & ' /c xcopy /E/D/Y/H/R/C  "' & $MaterialLibraryPath & '" "' & $BackupPath & '"')
    MsgBox(0,'','finished')
EndFunc

Share this post


Link to post
Share on other sites

#7 ·  Posted (edited)

Good catch by Sweden, France was busy elsewhere.

Once again, that example demonstrates the usefulness of correct variable declaration and following strict rules for coding: Global Enum, Global Const, Global, Local Enum, Local Const, Local, and of course AutoItSetOption('MustDeclareVars', 1) at top of main file.

Edited by jchd

This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Share this post


Link to post
Share on other sites

#8 ·  Posted (edited)

Am sorry i dont understand where did you find this line of code ?

$nMsg = GUIGetMsg()
Switch $nMsg
case @ScriptDir & "\Saved\MaterialLibrary"

There is no such thing as case @ScriptDir & "\Saved\MaterialLibrary" and that would probably give an error anyway.

Instead there is:

case $Backup
BackupMaterialLibrary()
MsgBox(0,'','backup function completed.')

Case $Backup is the one triggered by backup button.

I still do not see any problem with the code that would make it execute the function again and again.

Also i cannot use RunWait because it pause script. I need to to keep going so i can calculate data being saved and output the result to editbox.

To compensate i added processexist in same loop to see if executed CMD still running or not.

OH OH am sorry i see it now :(

You could just tell me i used variable twice for different needs.

Thanks, i should have found it my self or declared it to be local within function.

Edited by madasraka

Share this post


Link to post
Share on other sites

#9 ·  Posted (edited)

Yes it's there !

Func BackupMaterialLibrary()

$Backup = (@ScriptDir & "\Saved\MaterialLibrary")

DirCreate ($Backup)

Now, you see. This causes no error (is a valid AutoIt statement) , but since $nMsg is an integer, the Case compares it against Number($Backup) and that evaluates to 0, which I believe is equivalent to "no message" for the message loop.

For non trivial scripts, imagine AutoIt requires declarations like Pascal and you'll be safe ;-)

Edited by jchd

This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Share this post


Link to post
Share on other sites

thanks man, i learned my lesson, which was "Make sure you dont use same variable twice for different purpose" :(

Or declare.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0