Sign in to follow this  
Followers 0
niubbone

Multi Radio Buttons and final check

4 posts in this topic

#1 ·  Posted (edited)

Hi.

I have multiple radio buttons in a GUI and i have to make the selectable multiple times and at the end i must check for a certain result. Looked for it in the forum but found no real help about my needs.

Local $GUITestLavoro = GUICreate("Test Colloquio Lavorativo", 468, 643, 402, 7)
                                GUICtrlCreateLabel("TEST DI IDONEITA' AL POSTO DI LAVORO", 48, 16, 377, 28)
                                GUICtrlSetFont(-1, 16, 400, 0, "MS Sans Serif")
                                GUICtrlCreateLabel("WorkTest", 104, 56, 282, 17)
                                GUICtrlCreateLabel("1)", 8, 88, 17, 22)
                                GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
                                Local $Radio1 = GUICtrlCreateRadio("Radio1", 8, 112, 425, 17)
                                Local $Radio2 = GUICtrlCreateRadio("Radio2", 8, 136, 425, 17)
                                Local $Radio3 = GUICtrlCreateRadio("Radio3", 8, 160, 425, 17)
                                Local $Radio4 = GUICtrlCreateRadio("Radio4", 8, 184, 425, 17)
                                Local $LabelRadioDom1 = GUICtrlCreateLabel("dom1", 32, 88, 30, 17)
                                GUICtrlCreateLabel("2)", 12, 211, 17, 20)
                                GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
                                Local $Radio5 = GUICtrlCreateRadio("Radio1b", 12, 235, 425, 17)
                                Local $Radio6 = GUICtrlCreateRadio("Radio2b", 12, 259, 425, 17)
                                Local $Radio7 = GUICtrlCreateRadio("Radio3b", 12, 283, 425, 17)
                                Local $Radio8 = GUICtrlCreateRadio("Radio4b", 12, 307, 425, 17)
                                Local $LabelRadioDom2 = GUICtrlCreateLabel("dom2", 36, 211, 30, 17)
                                GUICtrlCreateLabel("3)", 12, 340, 17, 20)
                                GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
                                Local $Radio9 = GUICtrlCreateRadio("Radio1c", 12, 364, 425, 17)
                                Local $Radio10 = GUICtrlCreateRadio("Radio2c", 12, 388, 425, 17)
                                Local $Radio11 = GUICtrlCreateRadio("Radio3c", 12, 412, 425, 17)
                                Local $Radio12 = GUICtrlCreateRadio("Radio4c", 12, 436, 425, 17)
                                Local $LabelRadioDom3 = GUICtrlCreateLabel("dom3", 36, 340, 30, 17)
                                GUICtrlCreateLabel("4)", 12, 462, 17, 20)
                                GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
                                Local $Radio13 = GUICtrlCreateRadio("Radio1d", 12, 486, 425, 17)
                                Local $Radio14 = GUICtrlCreateRadio("Radio2d", 12, 510, 425, 17)
                                Local $Radio15 = GUICtrlCreateRadio("Radio3d", 12, 534, 425, 17)
                                Local $Radio16 = GUICtrlCreateRadio("Radio4d", 12, 558, 425, 17)
                                Local $LabelRadioDom4 = GUICtrlCreateLabel("dom4", 36, 462, 30, 17)
                                Local $BottoneScappaTest = GUICtrlCreateButton("Scappa....", 8, 592, 177, 41, $WS_GROUP)
                                Local $BottoneConsegnaTest = GUICtrlCreateButton("Consegna il test", 280, 592, 177, 41, $WS_GROUP)
                                GUISetState(@SW_SHOW)
                                GUISetState(@SW_HIDE,$GUICercaLavoro)
                                ColloquioDomande()
                                While 1
                                    $nMsg = GUIGetMsg()
                                    Switch $nMsg
                                        Case $GUI_EVENT_CLOSE
                                            Exit

                                    EndSwitch
                                WEnd

As you can see I have multiple radios which are answers to a precise question and I need to make multiple radios selectable (one for each question) and to test out the result at the end.

A solution i found till now is to split every question in a single page with a next button, but i would like to do it kinda all togheter...

To make each group of radio buttons individual i discovered that i need to make them a group. Right?

Also, will this work in a similar way with checkboxes?

Thanks

Edited by niubbone

Share this post


Link to post
Share on other sites



Look into GUIStartGroup(), it does exactly what you need.

#include <WindowsConstants.au3>
#include <Constants.au3>
#include <GUIConstantsEx.au3>

Local $GUITestLavoro = GUICreate("Test Colloquio Lavorativo", 468, 643, 402, 7)
GUICtrlCreateLabel("TEST DI IDONEITA' AL POSTO DI LAVORO", 48, 16, 377, 28)
GUICtrlSetFont(-1, 16, 400, 0, "MS Sans Serif")
GUICtrlCreateLabel("WorkTest", 104, 56, 282, 17)
GUICtrlCreateLabel("1)", 8, 88, 17, 22)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
GUIStartGroup()
Local $Radio1 = GUICtrlCreateRadio("Radio1", 8, 112, 425, 17)
Local $Radio2 = GUICtrlCreateRadio("Radio2", 8, 136, 425, 17)
Local $Radio3 = GUICtrlCreateRadio("Radio3", 8, 160, 425, 17)
Local $Radio4 = GUICtrlCreateRadio("Radio4", 8, 184, 425, 17)
Local $LabelRadioDom1 = GUICtrlCreateLabel("dom1", 32, 88, 30, 17)
GUICtrlCreateLabel("2)", 12, 211, 17, 20)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
GUIStartGroup()
Local $Radio5 = GUICtrlCreateRadio("Radio1b", 12, 235, 425, 17)
Local $Radio6 = GUICtrlCreateRadio("Radio2b", 12, 259, 425, 17)
Local $Radio7 = GUICtrlCreateRadio("Radio3b", 12, 283, 425, 17)
Local $Radio8 = GUICtrlCreateRadio("Radio4b", 12, 307, 425, 17)
Local $LabelRadioDom2 = GUICtrlCreateLabel("dom2", 36, 211, 30, 17)
GUICtrlCreateLabel("3)", 12, 340, 17, 20)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
GUIStartGroup()
Local $Radio9 = GUICtrlCreateRadio("Radio1c", 12, 364, 425, 17)
Local $Radio10 = GUICtrlCreateRadio("Radio2c", 12, 388, 425, 17)
Local $Radio11 = GUICtrlCreateRadio("Radio3c", 12, 412, 425, 17)
Local $Radio12 = GUICtrlCreateRadio("Radio4c", 12, 436, 425, 17)
Local $LabelRadioDom3 = GUICtrlCreateLabel("dom3", 36, 340, 30, 17)
GUICtrlCreateLabel("4)", 12, 462, 17, 20)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
GUIStartGroup()
Local $Radio13 = GUICtrlCreateRadio("Radio1d", 12, 486, 425, 17)
Local $Radio14 = GUICtrlCreateRadio("Radio2d", 12, 510, 425, 17)
Local $Radio15 = GUICtrlCreateRadio("Radio3d", 12, 534, 425, 17)
Local $Radio16 = GUICtrlCreateRadio("Radio4d", 12, 558, 425, 17)
Local $LabelRadioDom4 = GUICtrlCreateLabel("dom4", 36, 462, 30, 17)
Local $BottoneScappaTest = GUICtrlCreateButton("Scappa....", 8, 592, 177, 41, $WS_GROUP)
Local $BottoneConsegnaTest = GUICtrlCreateButton("Consegna il test", 280, 592, 177, 41, $WS_GROUP)
GUISetState(@SW_SHOW)
;~ GUISetState(@SW_HIDE, $GUICercaLavoro)
;~ ColloquioDomande()
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd

Share this post


Link to post
Share on other sites

#3 ·  Posted (edited)

Perfect, both your example and Help example about that function were really helpful :P

EDIT:

After looking at help... I can't even understand how that it's done....

this is the code from help

#include <GUIConstantsEx.au3>

Opt('MustDeclareVars', 1)

Example()

Func Example()
    Local $button_1, $group_1, $radio_1, $radio_2, $radio_3
    Local $radio_4, $radio_5, $radio_6, $input_1, $input_2
    Local $radioval1, $radioval2, $msg

    Opt("GUICoordMode", 1)

    GUICreate("Radio Box Grouping Demo", 400, 280)

    ; Create the controls
    $button_1 = GUICtrlCreateButton("B&utton 1", 30, 20, 120, 40)
    $group_1 = GUICtrlCreateGroup("Group 1", 30, 90, 165, 160)
    GUIStartGroup()
    $radio_1 = GUICtrlCreateRadio("Radio &0", 50, 120, 70, 20)
    $radio_2 = GUICtrlCreateRadio("Radio &1", 50, 150, 60, 20)
    $radio_3 = GUICtrlCreateRadio("Radio &2", 50, 180, 60, 20)
    GUIStartGroup()
    $radio_4 = GUICtrlCreateRadio("Radio &A", 120, 120, 70, 20)
    $radio_5 = GUICtrlCreateRadio("Radio &B", 120, 150, 60, 20)
    $radio_6 = GUICtrlCreateRadio("Radio &C", 120, 180, 60, 20)
    GUIStartGroup()
    $input_1 = GUICtrlCreateInput("Input 1", 200, 20, 160, 30)
    $input_2 = GUICtrlCreateInput("Input 2", 200, 70, 160, 30)

    ; Set the defaults (radio buttons clicked, default button, etc)
    GUICtrlSetState($radio_1, $GUI_CHECKED)
    GUICtrlSetState($radio_6, $GUI_CHECKED)
    GUICtrlSetState($button_1, $GUI_FOCUS + $GUI_DEFBUTTON)

    ; Init our vars that we will use to keep track of radio events
    $radioval1 = 0    ; We will assume 0 = first radio button selected, 2 = last button
    $radioval2 = 2

    GUISetState()

    ; In this message loop we use variables to keep track of changes to the radios, another
    ; way would be to use GUICtrlRead() at the end to read in the state of each control.  Both
    ; methods are equally valid
    While 1
        $msg = GUIGetMsg()
        Select
            Case $msg = $GUI_EVENT_CLOSE
                Exit

            Case $msg = $button_1
                MsgBox(0, "Button", "Radio " & $radioval1 & @LF & "Radio " & Chr($radioval2 + Asc("A")) & @LF & GUICtrlRead($input_1) & @LF & GUICtrlRead($input_2))

            Case $msg = $radio_1 Or $msg = $radio_2 Or $msg = $radio_3
                $radioval1 = $msg - $radio_1

            Case $msg = $radio_4 Or $msg = $radio_5 Or $msg = $radio_6
                $radioval2 = $msg - $radio_4

        EndSelect
    WEnd
EndFunc   ;==>Example

What this portion does???? :mellow:

$radioval1 = 0    ; We will assume 0 = first radio button selected, 2 = last button
    $radioval2 = 2

    GUISetState()

    ; In this message loop we use variables to keep track of changes to the radios, another
    ; way would be to use GUICtrlRead() at the end to read in the state of each control.  Both
    ; methods are equally valid
    While 1
        $msg = GUIGetMsg()
        Select
            Case $msg = $GUI_EVENT_CLOSE
                Exit

            Case $msg = $button_1
                MsgBox(0, "Button", "Radio " & $radioval1 & @LF & "Radio " & Chr($radioval2 + Asc("A")) & @LF & GUICtrlRead($input_1) & @LF & GUICtrlRead($input_2))

            Case $msg = $radio_1 Or $msg = $radio_2 Or $msg = $radio_3
                $radioval1 = $msg - $radio_1

            Case $msg = $radio_4 Or $msg = $radio_5 Or $msg = $radio_6
                $radioval2 = $msg - $radio_4

        EndSelect
    WEnd
EndFunc   ;==>Example

I'm not sure what it does....

Edited by niubbone

Share this post


Link to post
Share on other sites

I assume you understood GuiGetMsg(), just not how the results were used.

The cases for $GUI_EVENT_CLOSE and $button1 are self explanatory.

The other two cases trigger for a radio button in either of the two groups. The handling takes advantage of the fact that the native AutoIt controls are created with sequential control IDs. So the second radio button's control ID will be exactly one more than the first radio button's control ID. By subtracting the control ID of the first from the one that was clicked, you get a 0-based index of which button was clicked.

There are many, many other ways to handle this, so don't feel like you have to use this one.

:mellow:


Valuater's AutoIt 1-2-3, Class... Is now in Session!For those who want somebody to write the script for them: RentACoder"Any technology distinguishable from magic is insufficiently advanced." -- Geek's corollary to Clarke's law

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0