Jump to content
Sign in to follow this  
Followers 0
kaotkbliss

[Solved]Getting it to run on Windows 7

By kaotkbliss, in AutoIt General Help and Support

Recommended Posts

kaotkbliss    139

kaotkbliss
Posted (edited)

I'm not sure what's going on here (probably poor coding?) But I have been working on a program on an xp machine. Once I had it mostly working, I took it home to my Windows 7 64bit machine for further testing. However, it won't launch any programs. I tried runas as well as requireadmin but still no effect.

*edit*

updated code:

#include <WindowsConstants.au3>
#include <GUIConstantsEx.au3>
#include <ButtonConstants.au3>
#include <Array.au3>
#include <File.au3>
#include <staticconstants.au3>

AutoItSetOption("trayicondebug", 1)

Dim $prog[10]
Dim $progb[10]
Dim $progc[10]
Global $add1, $add2, $add3, $fileitem1, $fileitem2, $main, $remove1, $remove2, $remove3, $y, $x, $w
Global $aup, $aup1, $adown, $adown1, $bup, $bup1, $bdown, $bdown1, $cup, $cup1, $cdown, $cdown1
$a = 1
$b = 1
$c = 1

$ini = FileExists(@WorkingDir & "\pldata.ini")
If $ini = 0 Then
    firstrun()
EndIf

$tab1 = IniRead(@WorkingDir & "\pldata.ini", "Tab", 1, "Tab1")
$tab2 = IniRead(@WorkingDir & "\pldata.ini", "Tab", 2, "Tab2")
$tab3 = IniRead(@WorkingDir & "\pldata.ini", "Tab", 3, "Tab3")



gui()

Func gui()
    $posx = IniRead(@WorkingDir & "\pldata.ini", "pos", 1, -1)
    $posy = IniRead(@WorkingDir & "\pldata.ini", "pos", 2, -1)
    $y = 25
    $w = 1
    $main = GUICreate("Program Launcher", 350, 446, $posx, $posy)
    $filemenu = GUICtrlCreateMenu("Options")
    $fileitem1 = GUICtrlCreateMenuItem("Add Tab", $filemenu)
    $fileitem2 = GUICtrlCreateMenuItem("Remove Tab", $filemenu)
    GUICtrlCreateTab(2, 2, 346, 426)
    $win = GUICtrlCreateTabItem($tab1)
    createtaba()
    $y = 25
    $w = 1
    $add1 = GUICtrlCreateButton("Add Program", 95, 400, 73, 25)
    $remove1 = GUICtrlCreateButton("Remove Program", 180, 400, 90, 25)
    GUICtrlCreateLabel("", 324, 64, 22, 295, $SS_BLACKFRAME)
    $aup = GUICtrlCreateButton("/\" & @CR & "/\", 323, 26, 22, 25, BitOR($BS_MULTILINE, $BS_CENTER))
    $aup1 = GUICtrlCreateButton("/\", 323, 50, 22, 22, BitOR($BS_MULTILINE, $BS_CENTER))
    $adown = GUICtrlCreateButton("\/" & @CR & "\/", 323, 373, 22, 25, BitOR($BS_MULTILINE, $BS_VCENTER))
    $adown1 = GUICtrlCreateButton("\/", 323, 352, 22, 22, $BS_VCENTER)
    $win2 = GUICtrlCreateTabItem($tab2)
    createtabb()
    $y = 25
    $w = 1
    $add2 = GUICtrlCreateButton("Add Program", 95, 400, 73, 25)
    $remove2 = GUICtrlCreateButton("Remove Program", 180, 400, 90, 25)
    GUICtrlCreateLabel("", 324, 64, 22, 295, $SS_BLACKFRAME)
    $bup = GUICtrlCreateButton("/\" & @CR & "/\", 323, 26, 22, 25, BitOR($BS_MULTILINE, $BS_CENTER))
    $bup1 = GUICtrlCreateButton("/\", 323, 50, 22, 22, BitOR($BS_MULTILINE, $BS_CENTER))
    $bdown = GUICtrlCreateButton("\/" & @CR & "\/", 323, 373, 22, 25, BitOR($BS_MULTILINE, $BS_VCENTER))
    $bdown1 = GUICtrlCreateButton("\/", 323, 352, 22, 22, $BS_VCENTER)
    $win3 = GUICtrlCreateTabItem($tab3)
    createtabc()
    $y = 25
    $w = 1
    $add3 = GUICtrlCreateButton("Add Program", 95, 400, 73, 25)
    $remove3 = GUICtrlCreateButton("Remove Program", 180, 400, 90, 25)
    GUICtrlCreateLabel("", 324, 64, 22, 295, $SS_BLACKFRAME)
    $cup = GUICtrlCreateButton("/\" & @CR & "/\", 323, 26, 22, 25, BitOR($BS_MULTILINE, $BS_CENTER))
    $cup1 = GUICtrlCreateButton("/\", 323, 50, 22, 22, BitOR($BS_MULTILINE, $BS_CENTER))
    $cdown = GUICtrlCreateButton("\/" & @CR & "\/", 323, 373, 22, 25, BitOR($BS_MULTILINE, $BS_VCENTER))
    $cdown1 = GUICtrlCreateButton("\/", 323, 352, 22, 22, $BS_VCENTER)
    GUICtrlCreateTabItem("")
    GUISetState(@SW_SHOW)
EndFunc   ;==>gui

While 1
    $msg = GUIGetMsg()

    If $msg = $add1 Then
        createpath1()
    ElseIf $msg = $add2 Then
        createpath2()
    ElseIf $msg = $add3 Then
        createpath3()
    ElseIf $msg = $fileitem1 Then
        addtab()
    ElseIf $msg = $fileitem2 Then
        deltab()
    ElseIf $msg = $remove1 Then
        removea()
    ElseIf $msg = $remove2 Then
        removeb()
    ElseIf $msg = $remove3 Then
        removec()
    ElseIf $msg = $adown Then
        Dim $taba
        _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
        If IsArray($taba) Then
            $a += 5
            If $a > $taba[0] Then $a = $taba[0]
            pos()
            taba()
        EndIf
    ElseIf $msg = $adown1 Then
        Dim $taba
        _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
        If IsArray($taba) Then
            $a += 1
            If $a > $taba[0] Then $a = $taba[0]
            pos()
            taba()
        EndIf
    ElseIf $msg = $aup Then
        Dim $taba
        _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
        If IsArray($taba) Then
            $a -= 5
            If $a < 1 Then $a = 1
            pos()
            taba()
        EndIf
    ElseIf $msg = $aup1 Then
        Dim $taba
        _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
        If IsArray($taba) Then
            $a -= 1
            If $a < 1 Then $a = 1
            pos()
            taba()
        EndIf
    ElseIf $msg = $bdown Then
        Dim $tabb
        _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
        If IsArray($tabb) Then
            $b += 5
            If $b > $tabb[0] Then $b = $tabb[0]
            pos()
            tabb()
        EndIf
    ElseIf $msg = $bdown1 Then
        Dim $tabb
        _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
        If IsArray($tabb) Then
            $b += 1
            If $b > $tabb[0] Then $b = $tabb[0]
            pos()
            tabb()
        EndIf
    ElseIf $msg = $bup Then
        Dim $tabb
        _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
        If IsArray($tabb) Then
            $b -= 5
            If $b < 1 Then $b = 1
            pos()
            tabb()
        EndIf
    ElseIf $msg = $bup1 Then
        Dim $tabb
        _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
        If IsArray($tabb) Then
            $b -= 1
            If $b < 1 Then $b = 1
            pos()
            tabb()
        EndIf
    ElseIf $msg = $cdown Then
        Dim $tabc
        _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
        If IsArray($tabc) Then
            $c += 5
            If $c > $tabc[0] Then $c = $tabc[0]
            pos()
            tabc()
        EndIf
    ElseIf $msg = $cdown1 Then
        Dim $tabc
        _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
        If IsArray($tabc) Then
            $c += 1
            If $c > $tabc[0] Then $c = $tabc[0]
            pos()
            tabc()
        EndIf
    ElseIf $msg = $cup Then
        Dim $tabc
        _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
        If IsArray($tabc) Then
            $c -= 5
            If $c < 1 Then $c = 1
            pos()
            tabc()
        EndIf
    ElseIf $msg = $cup1 Then
        Dim $tabc
        _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
        If IsArray($tabc) Then
            $c -= 1
            If $c < 1 Then $c = 1
            pos()
            tabc()
        EndIf
    ElseIf $msg = $GUI_EVENT_CLOSE Then
        pos()
        GUIDelete()
        Exit (1)
    ElseIf $msg > 0 Then
        $run = GUICtrlRead($msg)
        Run($run)
    EndIf

WEnd

Func taba()
    Dim $taba
    Dim $buta
    _FileReadToArray(@WorkingDir & "\taba.cfg", $buta)
    ;$q=$buta[0]
    ;ReDim $buta[$q]
    $i = 1
    $y = 25
    $w = 1
    For $i = 1 To UBound($buta) - 1
        GUICtrlDelete($buta[$i])
    Next
    _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
    If IsArray($taba) Then
        If Int($taba[0]) - $a > 9 Then
            For $i = $a To $a + 8
                If $taba[$i] <> "" Then
                    If $y > 385 Then $y = 385
                    GUICtrlCreateLabel("", 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($taba[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w > 9 Then $w = 9
                    GUICtrlSetData($prog[$w], $name[$o])
                    _ArrayAdd($buta, $w)
                    $buta[$w] = GUICtrlCreateButton("", 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($buta[$w], $taba[$i])
                    GUICtrlSetImage($buta[$w], "" & $taba[$i] & "", 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        ElseIf Int($taba[0]) - $a < 10 Then
            For $i = $a To UBound($taba) - 1
                If $taba[$i] <> "" Then
                    If $y > 385 Then $y = 385
                    GUICtrlCreateLabel($taba[$i], 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($taba[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w > 9 Then $w = 9
                    GUICtrlSetData($prog[$w], $name[$o])
                    _ArrayAdd($buta, $w)
                    $buta[$w] = GUICtrlCreateButton($taba[$i], 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($buta[$w], $taba[$i])
                    GUICtrlSetImage($buta[$w], $taba[$i], 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        EndIf
    EndIf
EndFunc   ;==>taba

Func tabb()
    Dim $tabb
    Dim $butb[1]
    $i = 1
    $y = 25
    $w = 1
    For $i = 1 To UBound($butb) - 1
        GUICtrlDelete($butb[$i])
    Next
    _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
    If IsArray($tabb) Then
        If Int($tabb[0]) - $b > 9 Then
            For $i = $b To $b + 8
                If $tabb[$i] <> "" Then
                    If $y > 385 Then $y = 385
                    GUICtrlCreateLabel("", 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabb[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w > 9 Then $w = 9
                    GUICtrlSetData($progb[$w], $name[$o])
                    _ArrayAdd($butb, $w)
                    $butb[$w] = GUICtrlCreateButton("", 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butb[$w], $tabb[$i])
                    GUICtrlSetImage($butb[$w], "" & $tabb[$i] & "", 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        ElseIf Int($tabb[0]) - $b < 10 Then
            For $i = $b To UBound($tabb) - 1
                If $tabb[$i] <> "" Then
                    If $y > 385 Then $y = 385
                    GUICtrlCreateLabel($tabb[$i], 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabb[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w > 9 Then $w = 9
                    GUICtrlSetData($progb[$w], $name[$o])
                    _ArrayAdd($butb, $w)
                    $butb[$w] = GUICtrlCreateButton($tabb[$i], 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butb[$w], $tabb[$i])
                    GUICtrlSetImage($butb[$w], $tabb[$i], 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        EndIf
    EndIf
EndFunc   ;==>tabb

Func tabc()
    Dim $tabc
    Dim $butc[1]
    $i = 1
    $y = 25
    $w = 1
    For $i = 1 To UBound($butc) - 1
        GUICtrlDelete($butc[$i])
    Next
    _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
    If IsArray($tabc) Then
        If Int($tabc[0]) - $c > 9 Then
            For $i = $c To $c + 8
                If $tabc[$i] <> "" Then
                    If $y > 385 Then $y = 385
                    GUICtrlCreateLabel("", 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabc[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w > 9 Then $w = 9
                    GUICtrlSetData($progc[$w], $name[$o])
                    _ArrayAdd($butc, $w)
                    $butc[$w] = GUICtrlCreateButton("", 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butc[$w], $tabc[$i])
                    GUICtrlSetImage($butc[$w], "" & $tabc[$i] & "", 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        ElseIf Int($tabc[0]) - $c < 10 Then
            For $i = $c To UBound($tabc) - 1
                If $tabc[$i] <> "" Then
                    If $y > 385 Then $y = 385
                    GUICtrlCreateLabel($tabc[$i], 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabc[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w > 9 Then $w = 9
                    GUICtrlSetData($progc[$w], $name[$o])
                    _ArrayAdd($butc, $w)
                    $butc[$w] = GUICtrlCreateButton($tabc[$i], 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butc[$w], $tabc[$i])
                    GUICtrlSetImage($butc[$w], $tabc[$i], 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        EndIf
    EndIf
EndFunc   ;==>tabc

Func createpath1()
    $adpro = GUICreate("Add Program", 200, 30, -1, -1, -1, $WS_EX_ACCEPTFILES)
    $ftpr = GUICtrlCreateInput("", 1, 4, 160, 20)
    GUICtrlSetState($ftpr, $GUI_DROPACCEPTED)
    $prin = GUICtrlCreateButton("OK", 165, 1)
    GUISetState(@SW_SHOW)
    While 1
        $msg2 = GUIGetMsg()
        If $msg2 = $prin Then
            $read = GUICtrlRead($ftpr)
            FileWriteLine(@WorkingDir & "\taba.cfg", $read)
            GUIDelete($adpro)
            ExitLoop
        ElseIf $msg2 = $GUI_EVENT_CLOSE Then
            GUIDelete($adpro)
            ExitLoop
        EndIf
    WEnd
    pos()
    taba()
EndFunc   ;==>createpath1

Func createpath2()
    GUICreate("Add Program", 200, 30, -1, -1, -1, $WS_EX_ACCEPTFILES)
    $ftpr = GUICtrlCreateInput("", 1, 4, 160, 20)
    GUICtrlSetState($ftpr, $GUI_DROPACCEPTED)
    $prin = GUICtrlCreateButton("OK", 165, 1)
    GUISetState(@SW_SHOW)
    While 1
        $msg2 = GUIGetMsg()
        If $msg2 = $prin Then
            $read = GUICtrlRead($ftpr)
            FileWriteLine(@WorkingDir & "\tabb.cfg", $read)
            GUIDelete()
            ExitLoop
        ElseIf $msg2 = $GUI_EVENT_CLOSE Then
            GUIDelete()
            ExitLoop
        EndIf
    WEnd
    pos()
    tabb()
EndFunc   ;==>createpath2

Func createpath3()
    GUICreate("Add Program", 200, 30, -1, -1, -1, $WS_EX_ACCEPTFILES)
    $ftpr = GUICtrlCreateInput("", 1, 4, 160, 20)
    GUICtrlSetState($ftpr, $GUI_DROPACCEPTED)
    $prin = GUICtrlCreateButton("OK", 165, 1)
    GUISetState(@SW_SHOW)
    While 1
        $msg2 = GUIGetMsg()
        If $msg2 = $prin Then
            $read = GUICtrlRead($ftpr)
            FileWriteLine(@WorkingDir & "\tabc.cfg", $read)
            GUIDelete()
            ExitLoop
        ElseIf $msg2 = $GUI_EVENT_CLOSE Then
            GUIDelete()
            ExitLoop
        EndIf
    WEnd
    pos()
    tabc()
EndFunc   ;==>createpath3

Func removea()
    Local $remtaba
    _FileReadToArray(@WorkingDir & "\taba.cfg", $remtaba)
    $remove = GUICreate("Remove", 400, 500)
    $del = GUICtrlCreateButton("Delete", 180, 460, 50, 30)
    $lista = GUICtrlCreateListView("Select program then click delete", 1, 1, 398, 450)
    For $i = 1 To UBound($remtaba) - 1
        If $remtaba[$i] <> "" Then
            GUICtrlCreateListViewItem($remtaba[$i] & "|", $lista)
        EndIf
    Next
    GUISetState(@SW_SHOW)
    While 1
        $msg = GUIGetMsg()
        If $msg = $del Then
            $select = GUICtrlRead($lista)
            $select1 = GUICtrlRead($select)
            $select2 = StringTrimRight($select1, 1)
            $read = FileRead(@WorkingDir & "\taba.cfg")
            $new = StringReplace($read, $select2, "")
            $new2 = StringReplace($new, @CRLF & @CRLF, @CRLF)
            $file = FileOpen(@WorkingDir & "\taba.cfg", 2)
            FileWrite($file, $new2)
            FileClose($file)
            ExitLoop
        ElseIf $msg = $GUI_EVENT_CLOSE Then
            GUIDelete($remove)
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($remove)
    GUIDelete($main)
    gui()
EndFunc   ;==>removea

Func removeb()
    Local $remtabb
    _FileReadToArray(@WorkingDir & "\tabb.cfg", $remtabb)
    $remove = GUICreate("Remove", 400, 500)
    $del = GUICtrlCreateButton("Delete", 180, 460, 50, 30)
    $listb = GUICtrlCreateListView("Select program then click delete", 1, 1, 398, 450)
    For $i = 1 To UBound($remtabb) - 1
        If $remtabb[$i] <> "" Then
            GUICtrlCreateListViewItem($remtabb[$i] & "|", $listb)
        EndIf
    Next
    GUISetState(@SW_SHOW)
    While 1
        $msg = GUIGetMsg()
        If $msg = $del Then
            $select = GUICtrlRead($listb)
            $select1 = GUICtrlRead($select)
            $select2 = StringTrimRight($select1, 1)
            $read = FileRead(@WorkingDir & "\tabb.cfg")
            $new = StringReplace($read, $select2, "")
            $new2 = StringReplace($new, @CRLF & @CRLF, @CRLF)
            $file = FileOpen(@WorkingDir & "\tabb.cfg", 2)
            FileWrite($file, $new2)
            FileClose($file)
            ExitLoop
        ElseIf $msg = $GUI_EVENT_CLOSE Then
            GUIDelete($remove)
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($remove)
    GUIDelete($main)
    gui()
EndFunc   ;==>removeb

Func removec()
    Local $remtabc
    _FileReadToArray(@WorkingDir & "\tabc.cfg", $remtabc)
    $remove = GUICreate("Remove", 400, 500)
    $del = GUICtrlCreateButton("Delete", 180, 460, 50, 30)
    $listc = GUICtrlCreateListView("Select program then click delete", 1, 1, 398, 450)
    For $i = 1 To UBound($remtabc) - 1
        If $remtabc[$i] <> "" Then
            GUICtrlCreateListViewItem($remtabc[$i] & "|", $listc)
        EndIf
    Next
    GUISetState(@SW_SHOW)
    While 1
        $msg = GUIGetMsg()
        If $msg = $del Then
            $select = GUICtrlRead($listc)
            $select1 = GUICtrlRead($select)
            $select2 = StringTrimRight($select1, 1)
            $read = FileRead(@WorkingDir & "\tabc.cfg")
            $new = StringReplace($read, $select2, "")
            $new2 = StringReplace($new, @CRLF & @CRLF, @CRLF)
            $file = FileOpen(@WorkingDir & "\tabc.cfg", 2)
            FileWrite($file, $new2)
            FileClose($file)
            ExitLoop
        ElseIf $msg = $GUI_EVENT_CLOSE Then
            GUIDelete($remove)
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($remove)
    GUIDelete($main)
    gui()
EndFunc   ;==>removec

Func addtab()

EndFunc   ;==>addtab

Func deltab()

EndFunc   ;==>deltab

Func firstrun()
    $1 = InputBox("Enter Tab 1 Name", "Enter a Name for Tab 1", "Tab1")
    $2 = InputBox("Enter Tab 2 Name", "Enter a Name for Tab 2", "Tab2")
    $3 = InputBox("Enter Tab 3 Name", "Enter a Name for Tab 3", "Tab3")
    IniWrite(@WorkingDir & "\pldata.ini", "Tab", 1, $1)
    IniWrite(@WorkingDir & "\pldata.ini", "Tab", 2, $2)
    IniWrite(@WorkingDir & "\pldata.ini", "Tab", 3, $3)
EndFunc   ;==>firstrun

Func pos()
    $pos = WinGetPos($main)
    IniWrite(@WorkingDir & "\pldata.ini", "pos", 1, $pos[0])
    IniWrite(@WorkingDir & "\pldata.ini", "pos", 2, $pos[1])
EndFunc   ;==>pos

Func createtaba()
    $prog[1] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[2] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[3] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[4] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[5] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[6] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[7] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[8] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[9] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    taba()
EndFunc   ;==>createtaba

Func createtabb()
    $progb[1] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[2] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[3] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[4] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[5] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[6] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[7] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[8] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[9] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    tabb()
EndFunc   ;==>createtabb

Func createtabc()
    $progc[1] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[2] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[3] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[4] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[5] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[6] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[7] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[8] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[9] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    tabc()
EndFunc   ;==>createtabc

<-Updated

Edited by kaotkbliss

010101000110100001101001011100110010000001101001011100110010000

001101101011110010010000001110011011010010110011100100001

My Android cat and mouse game
https://play.google.com/store/apps/details?id=com.KaosVisions.WhiskersNSqueek

We're gonna need another Timmy!

Share this post

Link to post
Share on other sites

jaberwacky    322

jaberwacky
Posted

It runs on my win 7 64 but I don't know if it runs correctly. I get 3 windows asking me for tab names and then another gui that has a button for entering and deleting programs. I enter a program name, click the button, but nothing happens.

Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum?

Share this post

Link to post
Share on other sites

kaotkbliss    139

kaotkbliss
Posted (edited)

Since it's not finished, I have not created any instructions yet. It's also in early stages

I just got the problem figured out but basically what you do is name your tabs (only on first run)

then click add and drag/drop or type in full path and click OK

this will add a bar on the gui to launch the program when clicked.

the couple things I had to do were:

change

ElseIf $msg <> 0 Then

$run = GUICtrlRead($msg)

Run($run)

to

ElseIf $msg > 0 Then

$run = GUICtrlRead($msg)

Run($run)

and also add

GUICtrlSetData($buta[$w], $taba[$i])

before setting the image.

GUICtrlSetImage($buta[$w], "" & $taba[$i] & "", 1)

Somehow windows xp was able to read the program path from the icon so was able to launch the programs in the gui, windows 7 would not so I had to create a label under the icon for the guigetmsg to read.

#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_outfile=Allin1.exe
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <WindowsConstants.au3>
#include <GUIConstantsEx.au3>
#include <ButtonConstants.au3>
#include <Array.au3>
#include <File.au3>
#include <staticconstants.au3>
AutoItSetOption("trayicondebug", 1)

Dim $prog[10]
Dim $progb[10]
Dim $progc[10]
Global $add1, $add2, $add3, $fileitem1, $fileitem2, $main, $remove1, $remove2, $remove3, $y, $x, $w
Global $aup, $aup1, $adown, $adown1, $bup, $bup1, $bdown, $bdown1, $cup, $cup1, $cdown, $cdown1
$a=1
$b=1
$c=1

$ini = FileExists(@WorkingDir & "\pldata.ini")
If $ini = 0 Then
    firstrun()
EndIf

$tab1 = IniRead(@WorkingDir & "\pldata.ini", "Tab", 1, "Tab1")
$tab2 = IniRead(@WorkingDir & "\pldata.ini", "Tab", 2, "Tab2")
$tab3 = IniRead(@WorkingDir & "\pldata.ini", "Tab", 3, "Tab3")



gui()

Func gui()
    $posx = IniRead(@WorkingDir & "\pldata.ini", "pos", 1, -1)
    $posy = IniRead(@WorkingDir & "\pldata.ini", "pos", 2, -1)
    $y = 25
    $w = 1
    $main = GUICreate("Program Launcher", 350, 446, $posx, $posy)
    $filemenu = GUICtrlCreateMenu("Options")
    $fileitem1 = GUICtrlCreateMenuItem("Add Tab", $filemenu)
    $fileitem2 = GUICtrlCreateMenuItem("Remove Tab", $filemenu)
    GUICtrlCreateTab(2, 2, 346, 426)
    $win = GUICtrlCreateTabItem($tab1)
    taba()
    $y = 25
    $w = 1
    $add1 = GUICtrlCreateButton("Add Program", 95, 400, 73, 25)
    $remove1 = GUICtrlCreateButton("Remove Program", 180, 400, 90, 25)
    GUICtrlCreateLabel("", 324, 64, 22, 295, $SS_BLACKFRAME)
    $aup = GUICtrlCreateButton("/\" & @CR & "/\", 323, 26, 22, 25, BitOR($BS_MULTILINE, $BS_CENTER))
    $aup1 = GUICtrlCreateButton("/\", 323, 50, 22, 22, BitOR($BS_MULTILINE, $BS_CENTER))
    $adown = GUICtrlCreateButton("\/" & @CR & "\/", 323, 373, 22, 25, BitOR($BS_MULTILINE, $BS_VCENTER))
    $adown1 = GUICtrlCreateButton("\/", 323, 352, 22, 22, $BS_VCENTER)
    $win2 = GUICtrlCreateTabItem($tab2)
    tabb()
    $y = 25
    $w = 1
    $add2 = GUICtrlCreateButton("Add Program", 95, 400, 73, 25)
    $remove2 = GUICtrlCreateButton("Remove Program", 180, 400, 90, 25)
    GUICtrlCreateLabel("", 324, 64, 22, 295, $SS_BLACKFRAME)
    $bup = GUICtrlCreateButton("/\" & @CR & "/\", 323, 26, 22, 25, BitOR($BS_MULTILINE, $BS_CENTER))
    $bup1 = GUICtrlCreateButton("/\", 323, 50, 22, 22, BitOR($BS_MULTILINE, $BS_CENTER))
    $bdown = GUICtrlCreateButton("\/" & @CR & "\/", 323, 373, 22, 25, BitOR($BS_MULTILINE, $BS_VCENTER))
    $bdown1 = GUICtrlCreateButton("\/", 323, 352, 22, 22, $BS_VCENTER)
    $win3 = GUICtrlCreateTabItem($tab3)
    tabc()
    $y = 25
    $w = 1
    $add3 = GUICtrlCreateButton("Add Program", 95, 400, 73, 25)
    $remove3 = GUICtrlCreateButton("Remove Program", 180, 400, 90, 25)
    GUICtrlCreateLabel("", 324, 64, 22, 295, $SS_BLACKFRAME)
    $cup = GUICtrlCreateButton("/\" & @CR & "/\", 323, 26, 22, 25, BitOR($BS_MULTILINE, $BS_CENTER))
    $cup1 = GUICtrlCreateButton("/\", 323, 50, 22, 22, BitOR($BS_MULTILINE, $BS_CENTER))
    $cdown = GUICtrlCreateButton("\/" & @CR & "\/", 323, 373, 22, 25, BitOR($BS_MULTILINE, $BS_VCENTER))
    $cdown1 = GUICtrlCreateButton("\/", 323, 352, 22, 22, $BS_VCENTER)
    GUICtrlCreateTabItem("")
    GUISetState(@SW_SHOW)
EndFunc   ;==>gui

While 1
    $msg = GUIGetMsg()

    If $msg = $add1 Then
        createpath1()
    ElseIf $msg = $add2 Then
        createpath2()
    ElseIf $msg = $add3 Then
        createpath3()
    ElseIf $msg = $fileitem1 Then
        addtab()
    ElseIf $msg = $fileitem2 Then
        deltab()
    ElseIf $msg = $remove1 Then
        removea()
    ElseIf $msg = $remove2 Then
        removeb()
    ElseIf $msg = $remove3 Then
        removec()
    ElseIf $msg = $adown Then
        Dim $taba
        _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
        $a+=5
        If $a>$taba[0] Then $a=$taba[0]
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $adown1 Then
        Dim $taba
        _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
        $a+=1
        If $a>$taba[0] Then $a=$taba[0]
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $aup Then
        $a-=5
        If $a<1 Then $a=1
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $aup1 Then
        $a-=1
        If $a<1 Then $a=1
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $bdown Then
        Dim $tabb
        _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
        $b+=5
        If $b>$tabb[0] Then $b=$tabb[0]
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $bdown1 Then
        Dim $tabb
        _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
        $b+=1
        If $b>$tabb[0] Then $b=$tabb[0]
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $bup Then
        $b-=5
        If $b<1 Then $b=1
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $bup1 Then
        $b-=1
        If $b<1 Then $b=1
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $cdown Then
        Dim $tabc
        _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
        $c+=5
        If $c>$tabc[0] Then $c=$tabc[0]
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $cdown1 Then
        Dim $tabc
        _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
        $c+=1
        If $c>$tabc[0] Then $c=$tabc[0]
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $cup Then
        $c-=5
        If $c<1 Then $c=1
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $cup1 Then
        $c-=1
        If $c<1 Then $c=1
        pos()
        GUIDelete($main)
        gui()
    ElseIf $msg = $GUI_EVENT_CLOSE Then
        pos()
        GUIDelete()
        Exit (1)
    ElseIf $msg > 0 Then
        $run = GUICtrlRead($msg)
        Run($run)
    EndIf

WEnd

Func taba()
    Dim $taba
    Dim $buta[1]
    If $y>385 Then $y=385
    $prog[1] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[2] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[3] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[4] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[5] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[6] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[7] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[8] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $prog[9] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)

    $i = 1
    $y = 25
    $w = 1
    _FileReadToArray(@WorkingDir & "\taba.cfg", $taba)
    If IsArray($taba) Then
        If Int($taba[0])-$a > 9 Then
            For $i = $a To $a+8
                If $taba[$i] <> "" Then
                    If $y>385 Then $y=385
                    GUICtrlCreateLabel("", 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($taba[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w>9 then $w=9
                    GUICtrlSetData($prog[$w], $name[$o])
                    _ArrayAdd($buta, $w)
                    $buta[$w] = GUICtrlCreateButton("", 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($buta[$w], $taba[$i])
                    GUICtrlSetImage($buta[$w], "" & $taba[$i] & "", 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        ElseIf Int($taba[0])-$a < 10 Then
            For $i = $a To UBound($taba) - 1
                If $taba[$i] <> "" Then
                    If $y>385 Then $y=385
                    GUICtrlCreateLabel($taba[$i], 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($taba[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w>9 then $w=9
                    GUICtrlSetData($prog[$w], $name[$o])
                    _ArrayAdd($buta, $w)
                    $buta[$w] = GUICtrlCreateButton($taba[$i], 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($buta[$w], $taba[$i])
                    GUICtrlSetImage($buta[$w], $taba[$i], 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        EndIf
    EndIf
EndFunc   ;==>taba

Func tabb()
    Dim $tabb
    Dim $butb[1]
    If $y>385 Then $y=385
    $progb[1] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[2] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[3] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[4] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[5] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[6] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[7] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[8] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progb[9] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)

    $i = 1
    $y = 25
    $w = 1
    _FileReadToArray(@WorkingDir & "\tabb.cfg", $tabb)
    If IsArray($tabb) Then
        If Int($tabb[0])-$b > 9 Then
            For $i = $b To $b+8
                If $tabb[$i] <> "" Then
                    If $y>385 Then $y=385
                    GUICtrlCreateLabel("", 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabb[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w>9 then $w=9
                    GUICtrlSetData($progb[$w], $name[$o])
                    _ArrayAdd($butb, $w)
                    $butb[$w] = GUICtrlCreateButton("", 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butb[$w], $tabb[$i])
                    GUICtrlSetImage($butb[$w], "" & $tabb[$i] & "", 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        ElseIf Int($tabb[0])-$b < 10 Then
            For $i = $b To UBound($tabb) - 1
                If $tabb[$i] <> "" Then
                    If $y>385 Then $y=385
                    GUICtrlCreateLabel($tabb[$i], 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabb[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w>9 then $w=9
                    GUICtrlSetData($progb[$w], $name[$o])
                    _ArrayAdd($butb, $w)
                    $butb[$w] = GUICtrlCreateButton($tabb[$i], 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butb[$w], $tabb[$i])
                    GUICtrlSetImage($butb[$w], $tabb[$i], 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        EndIf
    EndIf
EndFunc   ;==>tabb

Func tabc()
    Dim $tabc
    Dim $butc[1]
    If $y>385 Then $y=385
    $progc[1] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[2] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[3] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[4] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[5] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[6] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[7] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[8] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)
    $y += 40
    $progc[9] = GUICtrlCreateLabel("", 65, $y + 15, 185, 24)

    $i = 1
    $y = 25
    $w = 1
    _FileReadToArray(@WorkingDir & "\tabc.cfg", $tabc)
    If IsArray($tabc) Then
        If Int($tabc[0])-$c > 9 Then
            For $i = $c To $c+8
                If $tabc[$i] <> "" Then
                    If $y>385 Then $y=385
                    GUICtrlCreateLabel("", 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabc[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w>9 then $w=9
                    GUICtrlSetData($progc[$w], $name[$o])
                    _ArrayAdd($butc, $w)
                    $butc[$w] = GUICtrlCreateButton("", 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butc[$w], $tabc[$i])
                    GUICtrlSetImage($butc[$w], "" & $tabc[$i] & "", 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        ElseIf Int($tabc[0])-$c < 10 Then
            For $i = $c To UBound($tabc) - 1
                If $tabc[$i] <> "" Then
                    If $y>385 Then $y=385
                    GUICtrlCreateLabel($tabc[$i], 36, $y, 287, 40, $SS_BLACKFRAME)
                    $name = StringSplit($tabc[$i], "\")
                    $o = $name[0]
                    Int($o)
                    If $w>9 then $w=9
                    GUICtrlSetData($progc[$w], $name[$o])
                    _ArrayAdd($butc, $w)
                    $butc[$w] = GUICtrlCreateButton($tabc[$i], 5, $y + 1, 40, 40, $BS_ICON)
                    GUICtrlSetData($butc[$w], $tabc[$i])
                    GUICtrlSetImage($butc[$w], $tabc[$i], 1)
                    $y += 40
                    $w += 1
                EndIf
            Next
        EndIf
    EndIf
EndFunc   ;==>tabc

Func createpath1()
    $adpro=GUICreate("Add Program", 200, 30, -1, -1, -1, $WS_EX_ACCEPTFILES)
    $ftpr = GUICtrlCreateInput("", 1, 4, 160, 20)
    GUICtrlSetState($ftpr, $GUI_DROPACCEPTED)
    $prin = GUICtrlCreateButton("OK", 165, 1)
    GUISetState(@SW_SHOW)
    While 1
        $msg2 = GUIGetMsg()
        If $msg2 = $prin Then
            $read = GUICtrlRead($ftpr)
            FileWriteLine(@WorkingDir & "\taba.cfg", $read)
            GUIDelete($adpro)
            ExitLoop
        ElseIf $msg2 = $GUI_EVENT_CLOSE Then
            GUIDelete($adpro)
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($main)
    gui()
EndFunc   ;==>createpath1

Func createpath2()
    GUICreate("Add Program", 200, 30, -1, -1, -1, $WS_EX_ACCEPTFILES)
    $ftpr = GUICtrlCreateInput("", 1, 4, 160, 20)
    GUICtrlSetState($ftpr, $GUI_DROPACCEPTED)
    $prin = GUICtrlCreateButton("OK", 165, 1)
    GUISetState(@SW_SHOW)
    While 1
        $msg2 = GUIGetMsg()
        If $msg2 = $prin Then
            $read = GUICtrlRead($ftpr)
            FileWriteLine(@WorkingDir & "\tabb.cfg", $read)
            GUIDelete()
            ExitLoop
        ElseIf $msg2 = $GUI_EVENT_CLOSE Then
            GUIDelete()
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($main)
    gui()
EndFunc   ;==>createpath2

Func createpath3()
    GUICreate("Add Program", 200, 30, -1, -1, -1, $WS_EX_ACCEPTFILES)
    $ftpr = GUICtrlCreateInput("", 1, 4, 160, 20)
    GUICtrlSetState($ftpr, $GUI_DROPACCEPTED)
    $prin = GUICtrlCreateButton("OK", 165, 1)
    GUISetState(@SW_SHOW)
    While 1
        $msg2 = GUIGetMsg()
        If $msg2 = $prin Then
            $read = GUICtrlRead($ftpr)
            FileWriteLine(@WorkingDir & "\tabc.cfg", $read)
            GUIDelete()
            ExitLoop
        ElseIf $msg2 = $GUI_EVENT_CLOSE Then
            GUIDelete()
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($main)
    gui()
EndFunc   ;==>createpath3

Func removea()
    Local $remtaba
    _FileReadToArray(@WorkingDir & "\taba.cfg", $remtaba)
    $remove = GUICreate("Remove", 400, 500)
    $del = GUICtrlCreateButton("Delete", 180, 460, 50, 30)
    $lista = GUICtrlCreateListView("Select program then click delete", 1, 1, 398, 450)
    For $i = 1 To UBound($remtaba) - 1
        If $remtaba[$i] <> "" Then
            GUICtrlCreateListViewItem($remtaba[$i] & "|", $lista)
        EndIf
    Next
    GUISetState(@SW_SHOW)
    While 1
        $msg = GUIGetMsg()
        If $msg = $del Then
            $select = GUICtrlRead($lista)
            $select1 = GUICtrlRead($select)
            $select2 = StringTrimRight($select1, 1)
            $read = FileRead(@WorkingDir & "\taba.cfg")
            $new = StringReplace($read, $select2, "")
            $new2 = StringReplace($new, @CRLF & @CRLF, @CRLF)
            $file = FileOpen(@WorkingDir & "\taba.cfg", 2)
            FileWrite($file, $new2)
            FileClose($file)
            ExitLoop
        ElseIf $msg = $GUI_EVENT_CLOSE Then
            GUIDelete($remove)
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($remove)
    GUIDelete($main)
    gui()
EndFunc   ;==>removea

Func removeb()
    Local $remtabb
    _FileReadToArray(@WorkingDir & "\tabb.cfg", $remtabb)
    $remove = GUICreate("Remove", 400, 500)
    $del = GUICtrlCreateButton("Delete", 180, 460, 50, 30)
    $listb = GUICtrlCreateListView("Select program then click delete", 1, 1, 398, 450)
    For $i = 1 To UBound($remtabb) - 1
        If $remtabb[$i] <> "" Then
            GUICtrlCreateListViewItem($remtabb[$i] & "|", $listb)
        EndIf
    Next
    GUISetState(@SW_SHOW)
    While 1
        $msg = GUIGetMsg()
        If $msg = $del Then
            $select = GUICtrlRead($listb)
            $select1 = GUICtrlRead($select)
            $select2 = StringTrimRight($select1, 1)
            $read = FileRead(@WorkingDir & "\tabb.cfg")
            $new = StringReplace($read, $select2, "")
            $new2 = StringReplace($new, @CRLF & @CRLF, @CRLF)
            $file = FileOpen(@WorkingDir & "\tabb.cfg", 2)
            FileWrite($file, $new2)
            FileClose($file)
            ExitLoop
        ElseIf $msg = $GUI_EVENT_CLOSE Then
            GUIDelete($remove)
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($remove)
    GUIDelete($main)
    gui()
EndFunc   ;==>removeb

Func removec()
    Local $remtabc
    _FileReadToArray(@WorkingDir & "\tabc.cfg", $remtabc)
    $remove = GUICreate("Remove", 400, 500)
    $del = GUICtrlCreateButton("Delete", 180, 460, 50, 30)
    $listc = GUICtrlCreateListView("Select program then click delete", 1, 1, 398, 450)
    For $i = 1 To UBound($remtabc) - 1
        If $remtabc[$i] <> "" Then
            GUICtrlCreateListViewItem($remtabc[$i] & "|", $listc)
        EndIf
    Next
    GUISetState(@SW_SHOW)
    While 1
        $msg = GUIGetMsg()
        If $msg = $del Then
            $select = GUICtrlRead($listc)
            $select1 = GUICtrlRead($select)
            $select2 = StringTrimRight($select1, 1)
            $read = FileRead(@WorkingDir & "\tabc.cfg")
            $new = StringReplace($read, $select2, "")
            $new2 = StringReplace($new, @CRLF & @CRLF, @CRLF)
            $file = FileOpen(@WorkingDir & "\tabc.cfg", 2)
            FileWrite($file, $new2)
            FileClose($file)
            ExitLoop
        ElseIf $msg = $GUI_EVENT_CLOSE Then
            GUIDelete($remove)
            ExitLoop
        EndIf
    WEnd
    pos()
    GUIDelete($remove)
    GUIDelete($main)
    gui()
EndFunc   ;==>removec

Func addtab()

EndFunc   ;==>addtab

Func deltab()

EndFunc   ;==>deltab

Func firstrun()
    $1 = InputBox("Enter Tab 1 Name", "Enter a Name for Tab 1","Tab1")
    $2 = InputBox("Enter Tab 2 Name", "Enter a Name for Tab 2","Tab2")
    $3 = InputBox("Enter Tab 3 Name", "Enter a Name for Tab 3","Tab3")
    IniWrite(@WorkingDir & "\pldata.ini", "Tab", 1, $1)
    IniWrite(@WorkingDir & "\pldata.ini", "Tab", 2, $2)
    IniWrite(@WorkingDir & "\pldata.ini", "Tab", 3, $3)
EndFunc   ;==>firstrun

Func pos()
    $pos = WinGetPos($main)
    IniWrite(@WorkingDir & "\pldata.ini", "pos", 1, $pos[0])
    IniWrite(@WorkingDir & "\pldata.ini", "pos", 2, $pos[1])
EndFunc

*edit*

Now I am working on a better way of updating the changes made to programs without consistantly destroying and rebuilding the gui

Edited by kaotkbliss

010101000110100001101001011100110010000001101001011100110010000

001101101011110010010000001110011011010010110011100100001

My Android cat and mouse game
https://play.google.com/store/apps/details?id=com.KaosVisions.WhiskersNSqueek

We're gonna need another Timmy!

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing AutoIt General Help and Support
×