Sign in to follow this  
Followers 0
SYRAU3

Webcam.au3 > Problem With Windows 7 64Bit

6 posts in this topic

#1 ·  Posted (edited)

on Win_7 32 Bit version when more than a program uses the webcam a GUI appears :

Posted Image

this is only on 32 bit versions.... But:

on 64 bit this gui always appear in my programs even when i disconnect the program from the device..and run it again.. it appears..

is it wrong with the script? or with the system it self.

Thanks in advance. :)

#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
$WM_CAP_START = 0x400
$WM_CAP_UNICODE_START = $WM_CAP_START +100
$WM_CAP_PAL_SAVEA = $WM_CAP_START + 81
$WM_CAP_PAL_SAVEW = $WM_CAP_UNICODE_START + 81
$WM_CAP_UNICODE_END = $WM_CAP_PAL_SAVEW
$WM_CAP_ABORT = $WM_CAP_START + 69
$WM_CAP_DLG_VIDEOCOMPRESSION = $WM_CAP_START + 46
$WM_CAP_DLG_VIDEODISPLAY = $WM_CAP_START + 43
$WM_CAP_DLG_VIDEOFORMAT = $WM_CAP_START + 41
$WM_CAP_DLG_VIDEOSOURCE = $WM_CAP_START + 42
$WM_CAP_DRIVER_CONNECT = $WM_CAP_START + 10
$WM_CAP_DRIVER_DISCONNECT = $WM_CAP_START + 11
$WM_CAP_DRIVER_GET_CAPS = $WM_CAP_START + 14
$WM_CAP_DRIVER_GET_NAMEA = $WM_CAP_START + 12
$WM_CAP_DRIVER_GET_NAMEW = $WM_CAP_UNICODE_START + 12
$WM_CAP_DRIVER_GET_VERSIONA = $WM_CAP_START + 13
$WM_CAP_DRIVER_GET_VERSIONW = $WM_CAP_UNICODE_START + 13
$WM_CAP_EDIT_COPY = $WM_CAP_START + 30
$WM_CAP_END = $WM_CAP_UNICODE_END
$WM_CAP_FILE_ALLOCATE = $WM_CAP_START + 22
$WM_CAP_FILE_GET_CAPTURE_FILEA = $WM_CAP_START + 21
$WM_CAP_FILE_GET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 21
$WM_CAP_FILE_SAVEASA = $WM_CAP_START + 23
$WM_CAP_FILE_SAVEASW = $WM_CAP_UNICODE_START + 23
$WM_CAP_FILE_SAVEDIBA = $WM_CAP_START + 25
$WM_CAP_FILE_SAVEDIBW = $WM_CAP_UNICODE_START + 25
$WM_CAP_FILE_SET_CAPTURE_FILEA = $WM_CAP_START + 20
$WM_CAP_FILE_SET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 20
$WM_CAP_FILE_SET_INFOCHUNK = $WM_CAP_START + 24
$WM_CAP_GET_AUDIOFORMAT = $WM_CAP_START + 36
$WM_CAP_GET_CAPSTREAMPTR = $WM_CAP_START + 1
$WM_CAP_GET_MCI_DEVICEA = $WM_CAP_START + 67
$WM_CAP_GET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 67
$WM_CAP_GET_SEQUENCE_SETUP = $WM_CAP_START + 65
$WM_CAP_GET_STATUS = $WM_CAP_START + 54
$WM_CAP_GET_USER_DATA = $WM_CAP_START + 8
$WM_CAP_GET_VIDEOFORMAT = $WM_CAP_START + 44
$WM_CAP_GRAB_FRAME = $WM_CAP_START + 60
$WM_CAP_GRAB_FRAME_NOSTOP = $WM_CAP_START + 61
$WM_CAP_PAL_AUTOCREATE = $WM_CAP_START + 83
$WM_CAP_PAL_MANUALCREATE = $WM_CAP_START + 84
$WM_CAP_PAL_OPENA = $WM_CAP_START + 80
$WM_CAP_PAL_OPENW = $WM_CAP_UNICODE_START + 80
$WM_CAP_PAL_PASTE = $WM_CAP_START + 82
$WM_CAP_SEQUENCE = $WM_CAP_START + 62
$WM_CAP_SEQUENCE_NOFILE = $WM_CAP_START + 63
$WM_CAP_SET_AUDIOFORMAT = $WM_CAP_START + 35
$WM_CAP_SET_CALLBACK_CAPCONTROL = $WM_CAP_START + 85
$WM_CAP_SET_CALLBACK_ERRORA = $WM_CAP_START + 2
$WM_CAP_SET_CALLBACK_ERRORW = $WM_CAP_UNICODE_START + 2
$WM_CAP_SET_CALLBACK_FRAME = $WM_CAP_START + 5
$WM_CAP_SET_CALLBACK_STATUSA = $WM_CAP_START + 3
$WM_CAP_SET_CALLBACK_STATUSW = $WM_CAP_UNICODE_START + 3
$WM_CAP_SET_CALLBACK_VIDEOSTREAM = $WM_CAP_START + 6
$WM_CAP_SET_CALLBACK_WAVESTREAM = $WM_CAP_START + 7
$WM_CAP_SET_CALLBACK_YIELD = $WM_CAP_START + 4
$WM_CAP_SET_MCI_DEVICEA = $WM_CAP_START + 66
$WM_CAP_SET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 66
$WM_CAP_SET_OVERLAY = $WM_CAP_START + 51
$WM_CAP_SET_PREVIEW = $WM_CAP_START + 50
$WM_CAP_SET_PREVIEWRATE = $WM_CAP_START + 52
$WM_CAP_SET_SCALE = $WM_CAP_START + 53
$WM_CAP_SET_SCROLL = $WM_CAP_START + 55
$WM_CAP_SET_SEQUENCE_SETUP = $WM_CAP_START + 64
$WM_CAP_SET_USER_DATA = $WM_CAP_START + 9
$WM_CAP_SET_VIDEOFORMAT = $WM_CAP_START + 45
$WM_CAP_SINGLE_FRAME = $WM_CAP_START + 72
$WM_CAP_SINGLE_FRAME_CLOSE = $WM_CAP_START + 71
$WM_CAP_SINGLE_FRAME_OPEN = $WM_CAP_START + 70
$WM_CAP_STOP = $WM_CAP_START + 68



$avi = DllOpen("avicap32.dll")
$user = DllOpen("user32.dll")
$snapfile = @ScriptDir & "\scrshot.bmp"

$Main = GUICreate("Camera",350,270)
$cap = DllCall($avi, "int", "capCreateCaptureWindow", "str", "cap", "int", BitOR($WS_CHILD,$WS_VISIBLE), "int", 15, "int", 15, "int", 320, "int", 240, "hwnd", $Main, "int", 1)

DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_CONNECT, "int", 0, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_SCALE, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_OVERLAY, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEW, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEWRATE, "int", 1, "int", 0)

GUISetState(@SW_SHOW)
HotKeySet("{TAB}", "SnapShot")
HotKeySet("{ALT}", "Refresh")
While 1
    $msg = GUIGetMsg()
    If $msg = $GUI_EVENT_CLOSE Then
    ;DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_CALLBACK_FRAME, "int", 0, "int", 0)
        DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_END, "int", 0, "int", 0)
        DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_DISCONNECT, "int", 0, "int", 0)
    ;DllClose($avi)
        DllClose($user)
        Exit
    EndIf
    Sleep(1)
Wend

Func SnapShot()
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_GRAB_FRAME_NOSTOP, "int", 0, "int", 0)
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SAVEDIBA, "int", 0, "str", $snapfile)
EndFunc


Func Refresh()
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEWRATE, "int", 1, "int", 0)
EndFunc
Edited by SYRAU3

Share this post


Link to post
Share on other sites



can you elaborate on your issue?

have you compiled the script according to the os you have such as x32 bit or x64 bit?

Share this post


Link to post
Share on other sites

#3 ·  Posted (edited)

and nice script by the way cool stuff.

Edited by Cars0n66

Share this post


Link to post
Share on other sites

#4 ·  Posted (edited)

can you elaborate on your issue?

have you compiled the script according to the os you have such as x32 bit or x64 bit?

thanks for the reply:

Yes I did, i triet that ,many times.. all people who i send them the compiled program (have win 7 64bit) they have this problem!

I thought that this GUI is appearing because i didn't disconnect the webcam!! but look:

DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_CALLBACK_FRAME, "int", 0, "int", 0)
 DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_END, "int", 0, "int", 0)
 DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_DISCONNECT, "int", 0, "int", 0)
DllClose($avi)
 DllClose($user)

and still appears if you close the program and run it again!..until you restart your system... means what?!

Edited by SYRAU3

Share this post


Link to post
Share on other sites

check out

Share this post


Link to post
Share on other sites

Still nothing?

Can't get it to work on Windows 8 with an integrated Webcam "USB 2.0 UVC HD Webcam".

Same issue as @Syrau3, but it's working on W7x64 with an external Webcam.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0