Modbus Binary CRC16

[Drumline]

Hi all,

I need a Binary CRC16 calculation for Modbus protocol in autoit. Found only string version

I'm not a real programmer, only want to write values on a LCD display. The only part that strike me is CRC16. Can someone help me?

I.E. for this 2-bytes word:

010A

the CRC16 (calculated by a tool named ModbusMat) is 0x8027.

If exist some command-line utility to calculate this type of CRC16, will appreciate links.

Thanks.

[jchd]

This modified version gives the correct result:

expandcollapse popup

Dim $avTest[5] = ["Test line 1.", "abcdefghijklmnopqrstuvwxyz01234567890", 0xFEDCBA98, Binary("0x010a"), StringToBinary("Binary test.")]
$sMsg = ""
For $n = 0 To UBound($avTest) - 1
    $sMsg &= $avTest[$n] & " crc16 = " & _Crc16($avTest[$n]) & @CRLF
Next
MsgBox(64, "Crc16 Test", $sMsg)

; =======================================================
; Function      _Crc16
; Purpose:      Return the crc16 checksum of the input value
; Author:       'roby' at http://www.autoitscript.com/forum
; =======================================================
Func _Crc16($value)
    $value = Binary($value)
    Local $crc = 0xFFFF, $tmp
    Local $table[256] = [ _
            0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241, _
            0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440, _
            0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40, _
            0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841, _
            0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40, _
            0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41, _
            0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641, _
            0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040, _
            0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240, _
            0x3600, 0xF6C1, 0xF781, 0x3740, 0xF501, 0x35C0, 0x3480, 0xF441, _
            0x3C00, 0xFCC1, 0xFD81, 0x3D40, 0xFF01, 0x3FC0, 0x3E80, 0xFE41, _
            0xFA01, 0x3AC0, 0x3B80, 0xFB41, 0x3900, 0xF9C1, 0xF881, 0x3840, _
            0x2800, 0xE8C1, 0xE981, 0x2940, 0xEB01, 0x2BC0, 0x2A80, 0xEA41, _
            0xEE01, 0x2EC0, 0x2F80, 0xEF41, 0x2D00, 0xEDC1, 0xEC81, 0x2C40, _
            0xE401, 0x24C0, 0x2580, 0xE541, 0x2700, 0xE7C1, 0xE681, 0x2640, _
            0x2200, 0xE2C1, 0xE381, 0x2340, 0xE101, 0x21C0, 0x2080, 0xE041, _
            0xA001, 0x60C0, 0x6180, 0xA141, 0x6300, 0xA3C1, 0xA281, 0x6240, _
            0x6600, 0xA6C1, 0xA781, 0x6740, 0xA501, 0x65C0, 0x6480, 0xA441, _
            0x6C00, 0xACC1, 0xAD81, 0x6D40, 0xAF01, 0x6FC0, 0x6E80, 0xAE41, _
            0xAA01, 0x6AC0, 0x6B80, 0xAB41, 0x6900, 0xA9C1, 0xA881, 0x6840, _
            0x7800, 0xB8C1, 0xB981, 0x7940, 0xBB01, 0x7BC0, 0x7A80, 0xBA41, _
            0xBE01, 0x7EC0, 0x7F80, 0xBF41, 0x7D00, 0xBDC1, 0xBC81, 0x7C40, _
            0xB401, 0x74C0, 0x7580, 0xB541, 0x7700, 0xB7C1, 0xB681, 0x7640, _
            0x7200, 0xB2C1, 0xB381, 0x7340, 0xB101, 0x71C0, 0x7080, 0xB041, _
            0x5000, 0x90C1, 0x9181, 0x5140, 0x9301, 0x53C0, 0x5280, 0x9241, _
            0x9601, 0x56C0, 0x5780, 0x9741, 0x5500, 0x95C1, 0x9481, 0x5440, _
            0x9C01, 0x5CC0, 0x5D80, 0x9D41, 0x5F00, 0x9FC1, 0x9E81, 0x5E40, _
            0x5A00, 0x9AC1, 0x9B81, 0x5B40, 0x9901, 0x59C0, 0x5880, 0x9841, _
            0x8801, 0x48C0, 0x4980, 0x8941, 0x4B00, 0x8BC1, 0x8A81, 0x4A40, _
            0x4E00, 0x8EC1, 0x8F81, 0x4F40, 0x8D01, 0x4DC0, 0x4C80, 0x8C41, _
            0x4400, 0x84C1, 0x8581, 0x4540, 0x8701, 0x47C0, 0x4680, 0x8641, _
            0x8201, 0x42C0, 0x4380, 0x8341, 0x4100, 0x81C1, 0x8081, 0x4040 ]
    ConsoleWrite("Debug: $value = " & $value & "  Len = " & BinaryLen($value) & @LF)
    For $i = 1 To BinaryLen($value)
        $crc = BitXOR(BitShift($crc, 8), $table[BitAND(BitXOR($crc, BinaryMid($value, $i, 1)), 0xFF)])
    Next
    Return Hex($crc, 4)
EndFunc   ;==>_Crc16

[Jeff West]

Good to see other PLC programmers on here.

jhcd's version above returns the correct value as confirmed by a program from Lambert Bies (http://www.lammertbies.nl/download/lib_crc.zip).

Both jchd's version and the one from Lambert Bies return a CRC16 value of 0x2780 for 0x010A. Your original post shows that you are expecting 0x8027 (high and low bytes swapped).