Sign in to follow this  
Followers 0
Ontosy

get combo list items

2 posts in this topic

#1 ·  Posted (edited)

how get the content in the combo list items?

how select a item in combo list programly?

Edited by Ontosy

Share this post


Link to post
Share on other sites



Ontosy,

_GUICtrlComboBox_GetList - or is that too obvious? :D

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • Em4gdn1m
      By Em4gdn1m
      Hey everyone, I'm curious if there is a way to incorporate a checkbox with a combo GUICtrl?
      so for instance I have a GUI that has a bunch of checkboxes that allow me to open certain programs as needed.  (this is just some parsing of my code, sorry, noob here and not sure what the preferred method of displaying code is, please enlighten me)

          $L0742 = GUICtrlCreateCheckbox("L07 4.2", 110, 320, 100)
          $L07502 = GUICtrlCreateCheckbox("L07 5.0.2", 110, 350, 100)
          $GenComm = GUICtrlCreateCheckbox("GenComm", 110, 380, 100)
          $Templates = GUICtrlCreateCheckbox("Templates", 110, 410, 100)
          $MCT = GUICtrlCreateCheckbox("MCT", 110, 440, 100)
          $Desktop_Shortcuts = GUICtrlCreateCheckbox("Desktop Shortcuts by Tester", 110, 470, 200)
       
      ...
      Case $msg = $RunBtn
                  RunPrograms()
       
      ...
      Func RunPrograms()

          if GUICtrlRead($L0742) = $GUI_CHECKED then Run("C:\Program Files\Varian\Paxscan\L07 Rel4.2\viva\viva.exe", "")
          if GUICtrlRead($L07502) = $GUI_CHECKED then Run("C:\Program Files\Varian\Paxscan\L07 Rel5\viva\viva.exe", "")
          if GUICtrlRead($GenComm) = $GUI_CHECKED then Run("\\Fpanelfs1\FPShared\Desktop_Shortcuts_by_Tester\Matt\CPI Generator\CPI Generator Windows 7 64 Bit\GenComm\GenComm.NET.exe", "")
          if GUICtrlRead($Templates) = $GUI_CHECKED then ShellExecute("\\Fpanelfs1\FPProjects\Documentation Controlled\Test_Templates")
          if GUICtrlRead($MCT) = $GUI_CHECKED then Run("\\Fpanelfs1\FPProjects\Documentation Controlled\Manufacturing Software\MCT\MCT.exe","")
          if GUICtrlRead($Desktop_Shortcuts) = $GUI_CHECKED then ShellExecute("\\Fpanelfs1\fpshared\Desktop_Shortcuts_by_Tester")
      EndFunc
       
      so i click some checkboxes, and hit a run button and the programs which are checked run, great.
      BUT i want to add a bunch of options under one checkbox. A combo that will list a bunch of versions of a program that can be opened. something like this... but I want that program to be part of a checkbox
      $ViVAComboBox = GUICtrlCreateCombo("L01 Rel 13", 110, 320, 100)
      GUICtrlSetData($ViVAComboBox, "L04|L05|L07 Rel 4.2|L07 Rel 5.0.2|L09", "L07 Rel 4.2")
       
      is this possible? is there another GUICtrl that does this better that i am not aware of?
       
       
    • Wingens
      By Wingens
      Hi all,
      I created a little script we use at work for inputing date and time stamps into our ticket system.
      Now I thought it would look nice in a Metro style GUI, I found an UDF on the forum what does almost everything I want.
      I have but one thing I can't seem to find and don't have the skills to create.
      The gui uses one pulldown menu (GUICtrlCreateCombo) it stays in the older looking style.
      I attached the script and files I have, also in the zip you find an example of what I am looking for.
       
      Hope you guys can help me 
      Hotkey.zip
    • jloyzaga
      By jloyzaga
      I'm trying to use GUICtrlCreateCombo but I need it to get the list values from an excel spreadsheet column - that makes it dynamic. My method is to prompt for the Module name (this gives me the application to run the automation test) this also gives me the name of the folder that stores all the spreadsheets.
      1.I then get the list of spreadsheet names and use that as input for another list (this can be select 1 or many or all - don't know which control to use...)
      2.On selection I then go to the spreadsheets selected and display columns C, E from TestController tab in a further combo box to select 1 or many or all.
      3. keep doing point 2 above until all selected in 1 are complete. I'm wondering if I just display as many combo boxes as items selected in point 1 or loop thru them somehow.
      Very complex for my little brain - any advice to simplify is greatly appreciated
      Joe
       
      Accounts_TestFlow.xls
    • rm4453
      By rm4453
      I need to find a way to after x amount of seconds set the Autoit gui's ComboBox to next option available, and if it reaches the end of the list start back at beginning. This way I can cycle through checking if users are connected to a network. The combo is populated via a recursive file search that contains folders with each connected user's username. The ComboBox will contain something like " username\config " for every connected user. So I need to make so it cycles through constantly every X seconds I have the gui functioning, and all that I just can't get this one part to work.

      TL:DR - How do I make so an AutoIt GUI ComboBox will cycle through all of its options every X seconds, and when it reaches bottom of options cycle back to top and continue the process again.

      Thanks! I can't post any code due to NDA sorry...
    • kcvinu
      By kcvinu
      Hi all,
      I am playing with a combo box. The code from help file is working. But the code i wrote is not working. Help file uses "_GUICtrlComboBox_Create" for creating combo box. But i used native "GUICtrlCreateCombo". Then i replaced my native combo creation function with the UDF. Then my code worked. I think the hi word and low word parameters are the problem. 
      Here is my code.
      #include <ComboConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> Local $sCMB_Items = "Apple|Orange|Mango|Banana|Grape" #Region ### START Koda GUI section ### Form= Global $hForm1 = GUICreate("Form1", 283, 188, 312, 166) Global $hCombo1 = GUICtrlCreateCombo("", 40, 48, 185, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL)) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### GUICtrlSetData($hCombo1, $sCMB_Items) GUIRegisterMsg($WM_COMMAND, "WM_COMMAND") While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd Func WM_COMMAND($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg Local $hWndFrom, $iIDFrom, $iCode $hWndFrom = $lParam $iIDFrom = BitAND($wParam, 0xFFFF) ; Low Word $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case $hCombo1 Switch $iCode Case $CBN_DBLCLK ; Insert your code here MsgBox(0,"","$CBN_DBLCLK") Case $CBN_DROPDOWN ; Insert your code here MsgBox(0,"","$CBN_DROPDOWN") Case $CBN_EDITCHANGE ; Insert your code here MsgBox(0,"","$CBN_EDITCHANGE") Case $CBN_SELCHANGE ; Insert your code here MsgBox(0,"","$CBN_SELCHANGE") EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_COMMAND And this is the code from help file. Slightly modified. But working
      #include <GuiComboBox.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include <WindowsConstants.au3> Global $g_hCombo Example() Func Example() Local $hGUI ; Create GUI $hGUI = GUICreate("(UDF) ComboBox Create", 400, 296) $g_hCombo = _GUICtrlComboBox_Create($hGUI, "", 2, 2, 396, 296) GUISetState(@SW_SHOW) ; Add files _GUICtrlComboBox_BeginUpdate($g_hCombo) _GUICtrlComboBox_AddDir($g_hCombo, "", $DDL_DRIVES, False) _GUICtrlComboBox_EndUpdate($g_hCombo) GUIRegisterMsg($WM_COMMAND, "WM_COMMAND") ; Loop until the user exits. Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() EndFunc ;==>Example Func WM_COMMAND($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg Local $hWndFrom, $iIDFrom, $iCode $hWndFrom = $lParam $iIDFrom = BitAND($wParam, 0xFFFF) ; Low Word $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case $g_hCombo Switch $iCode Case $CBN_CLOSEUP ; Sent when the list box of a combo box has been closed MsgBox(0,"","$CBN_CLOSEUP") Case $CBN_DBLCLK ; Sent when the user double-clicks a string in the list box of a combo box MsgBox(0,"","$CBN_DBLCLK") Case $CBN_DROPDOWN ; Sent when the list box of a combo box is about to be made visible MsgBox(0,"","$CBN_DROPDOWN") Case $CBN_EDITCHANGE ; Sent after the user has taken an action that may have altered the text in the edit control portion of a combo box MsgBox(0,"","$CBN_EDITCHANGE") Case $CBN_EDITUPDATE ; Sent when the edit control portion of a combo box is about to display altered text Case $CBN_ERRSPACE ; Sent when a combo box cannot allocate enough memory to meet a specific request Case $CBN_KILLFOCUS ; Sent when a combo box loses the keyboard focus Case $CBN_SELCHANGE ; Sent when the user changes the current selection in the list box of a combo box MsgBox(0,"","$CBN_SELCHANGE") EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_COMMAND For those who wants the au3 file;
      Here it is
       
      Code From help file.au3
      My code.au3