Jump to content
Sign in to follow this  
yookee

About _IEImgClick and something, strange phenomenon.

Recommended Posts

yookee

My script is used to auto login OA system from IE. When it runs by Go(F5) in SciTE, can login successfully, these is nothing. I execute it by compiled exe file, login too, but will show dialog box with AutoIt Error.

Error: The requested action with this object has failed.

At the end of my script, I add two MsgBox to see what happened.

MsgBox(0, "Debug", "1")

_IEImgClick($oIE, "login_btn_off.gif", "src")

MsgBox(0, "Debug", "2")

It will show msgbox1, then login, and then show msgbox2, without error.

But if comment msgbox1, there would not show msgbox2 after login, show error and script go finished.

So can't find cause by _IEErrorHandlerRegister.

Why?

Edited by yookee

Share this post


Link to post
Share on other sites
someone

Can you show your whole script? More then likely it means that the page isn't loading fully, and the extra half second you have to click on the message box allows it to load. Sometimes clicking an object in a page causes the page to reload, and you have to use an IELoadWait command.


While ProcessExists('Andrews bad day.exe')
	BlockInput(1)
	SoundPlay('Music.wav')
	SoundSetWaveVolume('Louder')
WEnd

Share this post


Link to post
Share on other sites
someone

yookee,

I apologize for misdirecting you, I skimmed the OP and didn't pay attention to the fact you were automating a site login.

Unfortunately site auto-login is against the forum rules. http://www.autoitscript.com/forum/forum-2/announcement-13-forum-rules/

Also, really doesn't seem like you read my original post.....


While ProcessExists('Andrews bad day.exe')
	BlockInput(1)
	SoundPlay('Music.wav')
	SoundSetWaveVolume('Louder')
WEnd

Share this post


Link to post
Share on other sites
lesolutionneur

You've to add an IEwait, otherwise, your script check the field before the page loads.

Hope this help you (check in the documentation how to use this)

Share this post


Link to post
Share on other sites
yookee

Oh, I'm sorry for that. My original idea is not talking about auto-login, just why msgbox2 didn't execute.

yookee,

I apologize for misdirecting you, I skimmed the OP and didn't pay attention to the fact you were automating a site login.

Unfortunately site auto-login is against the forum rules. http://www.autoitscript.com/forum/forum-2/announcement-13-forum-rules/

Also, really doesn't seem like you read my original post.....

Share this post


Link to post
Share on other sites
yookee

The page is redirected, so _IELoadWait is waitting and waitting again, timeout.

But, because of waitting, the error disappears.

Why?

You've to add an IEwait, otherwise, your script check the field before the page loads.

Hope this help you (check in the documentation how to use this)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • Seminko
      By Seminko
      Wrote a script that grabs all of the IP addresses from Netflix's IP log, checks the IPs and returns suspicious activity.
      Everything works as it should but only when _IECreate is set to visible. When visible is set to false, it fails to login for some reason.
      Any ideas what might cause it and/or how to circumvent that?
    • nooneclose
      By nooneclose
      I need to send a string of text to this popup and click on the ok button to save it.
      Here is the code I have so far:
      ;Start IE Sleep(7000) $oIE = _IECreate("http://www.google.com") Sleep(500) _IELoadWait($oIE) $hIE = _IEPropertyGet($oIE, "hwnd") ; Get Handle of the IE window Sleep(500) WinSetState($hIE, "", @SW_MAXIMIZE) ;Wait for a browser page load to complete Sleep(3000) _IENavigate($oIE, "https://properURL.com") Sleep(8000) _IELoadWait($oIE) ;Attach to a browser control embedded in another window $oIE = _IEAttach("https://"properURL.com", url") ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $oIE = ' & $oIE & @CRLF & '>Error code: ' & @error & ' Extended code: 0x' & Hex(@extended) & @CRLF) ;### Debug Console Sleep(2000) ;Get the title of the webpage ;Local $wTitle = _IEPropertyGet($oIE, "title") ;MsgBox($MB_SYSTEMMODAL, "Webpage title:", $wTitle) ;Clicks the new button Sleep(3000) _IEAction($nWorkOrderB, "focus") _IEAction($nWorkOrderB, "click") Sleep(5000) ;Store the Element names where the important data will be sent ;Store the long description button Local $wLongDButton = _IEGetObjById($oIE, "m65d795a4-img") ;Store the long Description field id Local $wComments = _IEGetObjById($oIE, "ma6499a9c-rte_iframe") ;Store the ok button id that is in the long description Local $wCommOk = _IEGetObjById($oIE, "m74031266-pb") ;******************************************************************************* ; Send the stored data to the proper field ;******************************************************************************* ;Click the long description button Sleep(300) _IEAction($wLongDButton, "focus") _IEAction($wLongDButton, "click") Sleep(300) ;Sends the Comments Sleep(500) _IEAction($wComments, "focus") _IEAction($wComments, "click") Sleep(500) _IEFormElementSetValue($wComments, "hello darkness my old friend") ;Click the ok button Sleep(500) _IEAction($wCommOk, "focus") _IEAction($wCommOk, "click") Sleep(500)  
      Here is the popup:

    • hemichallenger
      By hemichallenger
      Hello,
      If anyone can help, it would be greatly appreciated. The code is just an example and similar to the issue with an internal webpage. I'm trying to autofill than click the submit button. I get the same error running the script.
      _IEFormElementSetValue, $_IESTATUS_InvalidObjectType
      IEGetObjById, $_IESTATUS_NoMatch
      Is it possible to edit the <textarea></textarea>  field with AutoIt?  If anyone could assist me on how. Than I could have a better understanding and chance in figuring it out on my main script. Thank you
      #include <IE.au3> Local $oIE1 = _IECreate ("https://www.w3schools.com/tags/tryit.asp?filename=tryhtml_textarea") _IELoadWait($oIE1) local $oFormCollection = _IEFormGetCollection($oIE1,0) local $oid = _IEGetObjByid($oFormCollection, "iframeResult") _IEFormElementSetValue($oid, "test") sleep (2000) Local $oIE2 = _IECreate ("https://www.w3schools.com/html/tryit.asp?filename=tryhtml_scripts_intro") _IELoadWait($oIE2) $oForm2 = _IEFormGetCollection($oIE2,0) $oClickMe = _IEGetObjById($oForm2, "demo") _IEAction($oClickMe, "focus") _IEAction($oClickMe, "click")
    • Blueman
      By Blueman
      Hey Guys,
      Hope that you can help me with something, maybe this is a bug in the new version of AUTOIT but first i will check it with you to know for sure.
      I have made a simple GUI with a Embedded IE Object, then i would like to read the HTML with _IEBodyReadHTML(), easy right?
      When i use the old IE.au3 include from a year back or so, it is working fine!
      When i use the new IE.au3 include came with the new installation that is currently available on autoitscript.com it isnt working (i get a result that says; 0).
      Let me show you.
       
      Working Example
      #include <GUIConstantsEx.au3> #include <IE_EmbeddedVersioning.au3> #include <IE_PreVersion.au3> ;Older Version Example() Func Example() ; Create a GUI with various controls. Local $hGUI = GUICreate("Example", 1000, 1000) Local $idOK = GUICtrlCreateButton("OK", 310, 370, 85, 25) Global $oIE_1 = _IECreateEmbedded() ; CREATE IE OBJECT(S) GUICtrlCreateObj($oIE_1, 355, 5, 600, 360) _IENavigate($oIE_1, "https://www.google.nl", 1) Local $CheckHTML_T = _IEBodyReadHTML($oIE_1) ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) MsgBox(48,"",$CheckHTML_T) ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $idOK ExitLoop EndSwitch WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>Example  
      Failing Example
      #include <GUIConstantsEx.au3> #include <IE_EmbeddedVersioning.au3> #include <IE.au3> ;New Version Example() Func Example() ; Create a GUI with various controls. Local $hGUI = GUICreate("Example", 1000, 1000) Local $idOK = GUICtrlCreateButton("OK", 310, 370, 85, 25) Global $oIE_1 = _IECreateEmbedded() ; CREATE IE OBJECT(S) GUICtrlCreateObj($oIE_1, 355, 5, 600, 360) _IENavigate($oIE_1, "https://www.google.nl", 1) Local $CheckHTML_T = _IEBodyReadHTML($oIE_1) ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) MsgBox(48,"",$CheckHTML_T) ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $idOK ExitLoop EndSwitch WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>Example  
      I have attachted all files and i am testing on Windows 10 with the latest SciTe Program (Not compiled). 
      When i compile the script it is showing the same result.
      Thanks guys!
      IE_PreVersion.au3
      IE.au3
      IE_EmbeddedVersioning.au3
    • vati1011
      By vati1011
      Hey, guys.
      Currently, I'm using Opencv UDF and i'm  encountering issues with DLLOPEN(). it is failing and returning -1
      But, I cannot figure out why it is failing.
      I need help from people.
      I'm running windows 10 32bit.
      This's my code.
      #RequireAdmin $fileopen = DllOpen("opencv_core2413.dll") MsgBox(0,"Result",$fileopen) Example.au3opencv_core2413.dll
×