Jump to content
Sign in to follow this  
entrapay234

Assigning GUICtrlCreateInput handles to array: "Expected a "=" operator in assignment statement.:"

Recommended Posts

entrapay234

.

Edited by Abraluna

Share this post


Link to post
Share on other sites
Melba23

Abraluna,

Array indices use [ ] not ( ). ;)

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Melba23

Abraluna,

Works perfectly for me: :)

#include <GUIConstantsEx.au3>

Global $Input[50]
Global $GuiListDisplays[50]
Global $Sites[50]

$Form1_1 = GUICreate("Global Website Blocker", 661, 347, 335, 228)

$PageControl1 = GUICtrlCreateTab(8, 8, 644, 280)
$TabSheet1 = GUICtrlCreateTabItem("Input Block Sites ")
$Input[0] = GUICtrlCreateInput($GuiListDisplays[0], 16, 40, 121, 22)
$Input[1] = GUICtrlCreateInput($GuiListDisplays[1], 16, 64, 121, 22)
$Input[2] = GUICtrlCreateInput($GuiListDisplays[2], 16, 88, 121, 22)
$Input[3] = GUICtrlCreateInput($GuiListDisplays[3], 16, 112, 121, 22)
$Input[4] = GUICtrlCreateInput($GuiListDisplays[4], 16, 136, 121, 22)
GUICtrlCreateTabItem("")

GUISetState()

While 1
    If GUIGetMsg() = $GUI_EVENT_CLOSE Then Exit
WEnd

And you might want to look at using a loop to create the inputs - it will save a lot of typing. ;)

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Melba23

Braluna,

And your full source also works - and this version shows how to use the loops too: ;)

#include <GUIConstantsEx.au3>

Global $Input[50]
Global $GuiListDisplays[50]
Global $Sites[50]
Global $SiteListDir
$SiteListDir = @ScriptDir & "SiteLogFile.txt"

$Form1_1 = GUICreate("Global Website Blocker", 661, 347, 335, 228)
$PageControl1 = GUICtrlCreateTab(8, 8, 644, 280)
$TabSheet1 = GUICtrlCreateTabItem("Input Block Sites ")
For $i = 0 To 9
    For $j = 0 To 4
        $iItem = ($j * 10) + $i
        $Input[$iItem] = GUICtrlCreateInput($GuiListDisplays[$iItem], 16 + (128 * $j), 40 + (22 * $i), 121, 22)
    Next
Next
GUICtrlCreateTabItem("")
$Button1 = GUICtrlCreateButton("Block Site List", 8, 296, 321, 41)
GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif")
$Button2 = GUICtrlCreateButton("Save Site List", 360, 296, 145, 41)
GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif")
$Button3 = GUICtrlCreateButton("Load Site List", 504, 296, 145, 41)
GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif")
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            FuncBlockSites()
        Case $Button2
            FuncSaveSiteList()
        Case $Button3
            FuncLoadSiteList()
    EndSwitch
WEnd

Func FuncBlockSites()
    MsgBox(1, "", "Block Sites")
EndFunc   ;==>FuncBlockSites

Func FuncSaveSiteList()
    MsgBox(1, "", "Save Site List")
EndFunc   ;==>FuncSaveSiteList

Func FuncLoadSiteList()
    MsgBox(1, "", "Load Site List")
EndFunc   ;==>FuncLoadSiteList

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Melba23

Abraluna,

Don't know why it'd result in that specific error though

It is because AU3Check is a single pass check and sometimes errors when faced with something which is the result of an earlier error that was not immediately apparent. In this case I imagine it carried on looking for that missing EndIf and then errored at the first thing which made no sense afterwards. If you get one of these obscure errors then I suggest running Tidy - it looks for structure errors, not syntax ones, and so can provide valuable clues. ;)

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Melba23

Abraluna,

if you load/save/load/save over and over again it raises by 1

It is because _FileReadToArray sets the [0] element to a count - so you need to read from 1 To 50 and not 0 To 49: ;)

Func FuncLoadSiteList()
    $file = FileOpen($SiteListDir, 1)
    _FileReadToArray($SiteListDir, $Sites)
    For $i = 1 To 50
        GUICtrlSetData($Input[$i - 1], $Sites[$i])
    Next
EndFunc   ;==>FuncLoadSiteList

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Melba23

Abraluna,

If you want the inputs to have a "down and across" tab order then you need to adjust the algorithm: ;)

For $i = 0 To 4
    For $j = 0 To 9
        $iItem = ($i * 10) + $j
        $Input[$iItem] = GUICtrlCreateInput($GuiListDisplays[$iItem], 16 + (128 * $i), 40 + (22 * $j), 121, 22)
    Next
Next

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×