NiceBoy1234

Get all values for loop in new variable

6 posts in this topic

#1 ·  Posted (edited)

How do I get all values of the for loop, currently I get the last.

Local $path = "D:\xxx\test"
   Local $ae = _FileListToArray($path, "*")

test()

Func test()

   For $i = 0 To UBound($ae) - 1
      $newPath = $path & $ae[$i]
      $time = FileGetTime($newPath,0,1)
   Next

   ConsoleWrite($newPath)
   ConsoleWrite($time)

EndFunc


Thus $time does me give no value.

Edited by NiceBoy1234

Share this post


Link to post
Share on other sites



NiceBoy1234,

You need to put the ConsoleWrite inside the loop to iterate all the elements of the returned array.

And to get a valid path - you will need to insert a "\" into the return, add a trailing "\" to the $path variable, or set the $bReturnPath parameter when listing the files.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Thank could you tell me why $time holds no value.

Share this post


Link to post
Share on other sites

NiceBoy1234,

Probably because the path you pass to FileGetTime is invalid - that is why I mentioned how to get a valid path when I replied above.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

yes that worked, sorry

Share this post


Link to post
Share on other sites
#include <File.au3>
Local $sPath = @ScriptDir
Local $aFileList = _FileListToArray($sPath, "*", 1, 1)


Local $sFileTime, $sFilePath, $sFilePathTime

For $i = 1 To UBound($aFileList) - 1
    $sFilePath = $aFileList[$i]
    $sFileTime = FileGetTime($sFilePath, 0, 1)
    $sFilePathTime &= $sFilePath & " - Time:" & $sFileTime & @CRLF
    ;ConsoleWrite($sFilePath & " - Time:" & $sFileTime & @CRLF)
Next

ConsoleWrite($sFilePathTime & @CRLF)

 


Regards,
 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • lewisg
      By lewisg
      Suddenly a RunWait command has stop working after 2 years of no errors, issues, or problems. The code uses RunWait to start Plink.exe, a command-line remote connection tool similar to UNIX ssh. I'm using it to ssh to a linux (Centos) machine, run a Perl script, and redirect the output to a file on a PC running the AutoIt script.  
       
      $FilePath = "C:\AutoIT\LED" $FilePathPlus = $FilePath & "\plink.exe" $Code1 = RunWait(@ComSpec & " /c " & $FilePathPlus & " -ssh -l root -pw ?????? 10.170.4.163 /usr/local/nagios/etc/led.pl > C:\AutoIT\LED\led.txt ", @SW_SHOW) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : @ComSpec & " /c " & $FilePathPlus & " -ssh -l root -pw ????? 10.170.4.163 /usr/local/nagios/etc/led.pl > C:\AutoIT\LED\led.txt " = ' & @ComSpec & " /c " & $FilePathPlus & " -ssh -l root -pw ?????? 10.170.4.163 /usr/local/nagios/etc/led.pl > C:\AutoIT\LED\led.txt " & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console The ConsoleWrite output when cut-n-pasted into a DOS box produces the expected file so I know it works. I've also tried many variations of the function moving, adding, and changing the " and ' (quote) marks. Also tried it without the @ComSpec macro and other related functions...e.g.  ShellExecuteWait , etc.
      The PC is a Windows 10 64bit and AutoIT is version 3.3.14.2.
      Searching here and Google has not yielded any clues that helped. 
    • KING_NK
      By KING_NK
      #RequireAdmin
      Global $x=0
      Global $y=0
      Func Start()
      While 1
      AutoItSetOption('MouseCoordMode',0)
      AutoItSetOption('SendKeyDelay',10)
      WinActivate('XXX')
      MouseClick('Primary',852,62,1,10)
      sleep(2200)
      MouseClick('Primary',880,196,1,10)
      Send('260',0)      -----------------------> $a as 260
      MouseClick('Primary',880,196,1,0)
      sleep(2200)
      MouseClick('Primary',1019,194,1,10)
      Sleep(2200)
      Send('98',0) ------------------------->$b as 98
      sleep(1000)
      Wend
      EndFunc
       
       
      I want to use Different number in every loop in the place of $a and  $b.
      Is it possble?If it possible Kindly help me
    • amphoric
      By amphoric
      Hi,
      I am struggling converting my 1D array to a 2D array and then showing that in my List View. Below is my current code, where I would like to take the array from the input box, and have that displayed as a list within the list view this is a list of computer names, and then update the 2nd column of each line once I have ran a ping and a registry change on each computer name, with either 'Completed' and 'Failed'
      I have checked out the AutoIt Arrays page here: https://www.autoitscript.com/wiki/Arrays , but unfortunately I cannot get my head around it. Any help would be greatly appreciated.
      I hope this makes sense.
      Thanks
       
      #include <Date.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <MsgBoxConstants.au3> #include <GUIListBox.au3> #include <GuiListView.au3> #Region ### $Form1 = GUICreate("Title", 515, 533, -1, -1) GUISetBkColor(0xFFFFFF) $Pic2 = GUICtrlCreatePic("Images\pic.jpg", 16, 16, 212, 28) $Label1 = GUICtrlCreateLabel("Label", 240, 16, 271, 33, $SS_CENTER) GUICtrlSetFont(-1, 17, 800, 0, "") $Combo1 = GUICtrlCreateCombo("", 256, 406, 241, 25, BitOR($GUI_SS_DEFAULT_COMBO,$CBS_SIMPLE)) $Label2 = GUICtrlCreateLabel("Please select the location", 45, 401, 210, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $ChangeButton = GUICtrlCreateButton("Change", 286, 487, 75, 25) $RePromptButton = GUICtrlCreateButton("Re-prompt User", 366, 487, 139, 25) $Checkbox1 = GUICtrlCreateCheckbox("I have ensured that my selection is correct.", 10, 487, 273, 25) GUICtrlSetFont(-1, 10, 400, 0, "") $ManLocation = GUICtrlCreateLabel("Please enter the location:", 59, 448, 189, 20, $SS_RIGHT) GUICtrlSetFont(-1, 10, 800, 0, "") GUICtrlSetState(-1, $GUI_HIDE) $ManLocInput = GUICtrlCreateInput("", 256, 445, 241, 24) GUICtrlSetState(-1, $GUI_HIDE) $Label5 = GUICtrlCreateLabel("for this device:", 138, 418, 109, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Label3 = GUICtrlCreateLabel("Asset Number:", 98, 72, 107, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Input1 = GUICtrlCreateInput("", 215, 69, 241, 24) $AddMulti = GUICtrlCreateLabel("Add Multiple Assets", 356, 55, 98, 13, $SS_RIGHT) GUICtrlSetFont(-1, 8, 400, 6, "") GUICtrlSetColor(-1, 0x808080) GUICtrlSetCursor (-1, 0) $List1 = GUICtrlCreateListView("", 16, 104, 481, 278) $Add = GUICtrlCreateButton("Add", 461, 68, 35, 25) GUISetState(@SW_SHOW) #EndRegion ### ;### StartForm ### $FormaMultiple = GUICreate("Title", 277, 418, -1, -1) GUISetBkColor(0xFFFFFF) $Label1 = GUICtrlCreateLabel("Please add 1 asset number per line.", 8, 11, 253, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $OK = GUICtrlCreateButton("OK", 56, 375, 75, 25) $Edit1 = GUICtrlCreateEdit("", 20, 40, 233, 329) $Cancel = GUICtrlCreateButton("Cancel", 136, 375, 75, 25) GUISetState(@SW_HIDE) ;### EndForm ### ;### Add List View Columns START ### ;### Add List View Columns END ### ;### Read Locations START ### ;Read the LOCAL ini file SECTIONS Global $aSections = IniReadSectionNames("Locations.ini") ;If the above succeeded, convert the array to a string with each item separated by a | (pipe) and set the default selected item to $aSections[1] If(Not @Error) Then GUICtrlSetData($Combo1, _ArraytoString($aSections, "|", 1), $aSections[1]) ;### Read Locations END ### ;### Require Admin START ### ;#RequireAdmin ;### Require Admin END ### While 1 $nMsg = GUIGetMsg() ;### Data Validation START ### ;Set Checkbox = ENABLE/DISABLE if not GUICtrlRead($Combo1) = "" AND GUICtrlRead($Combo1) = "Not In List" then if not GUICtrlRead($ManLocInput) = "" Then If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) Else If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) EndIf Else if GUICtrlRead($Combo1) = "" Then If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) Else If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) EndIf EndIf ;Set Button = ENABLE/DISABLE If GUICtrlRead($Checkbox1) = 1 Then If Not ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_ENABLE) Else If ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_DISABLE) EndIf ;### Data Validation END ### Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $Add Case $AddMulti GUISetState(@SW_SHOW, $FormaMultiple) Case $Cancel GUISetState(@SW_HIDE, $FormaMultiple) Case $OK $sText = GUICtrlRead($Edit1) $aText = StringSplit($sText, @CRLF, 1) $bText = _ArrayToString($aText, ";", 1, -1) $cText = StringStripWS($bText, $STR_STRIPALL ) $dText = StringReplace($cText,";;",";") GUICtrlSetData($Input1, $dText) GUICtrlSetData($Edit1, "") GUISetState(@SW_HIDE, $FormaMultiple) For $i = 1 To $aText[0] Next Case $Combo1 ; If the combo is actioned Switch GUICtrlRead($Combo1) Case "Not In List" ; Show the manual input controls GUICtrlSetState($ManLocation, $GUI_SHOW) GUICtrlSetState($ManLocInput, $GUI_SHOW) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") Case Else ; Hide them GUICtrlSetState($ManLocation, $GUI_HIDE) GUICtrlSetState($ManLocInput, $GUI_HIDE) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") EndSwitch Case $ChangeButton ChangeReg() Case $RePromptButton RemoveReg() EndSwitch WEnd Func ChangeReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & " Changed to: " & GUICtrlRead($Combo1)) Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg Func RemoveReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & "CLEARED") Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg1  
    • MrCheese
      By MrCheese
      Hey Guys,
       
      So, the functions work, where primarygui() accurately determines the evaluation of the status of the checkboxes - the msgbox picks this up.
       
      However, later on, when we re-enter a 'for $i = 0 to ubound($checkbox)' loop, then in the 'batchinitial' function it doesn't picked up that the status&$i = 1, so it jumps out, then within the While 1 loop, it exits the loop in the first row, again because the status& $i= 0
      The "assign" line within the primarygui funtion, is this only a local assignment? if so, how can I make it cross function?
       
      Thank in adv for your help
       
       
      Func excelsheetlist() $i = 0 Global $aWorkSheets = _Excel_SheetList($oWorkbook1) If @error Then Exit MsgBox($MB_SYSTEMMODAL, "Excel UDF: _Excel_SheetList Example 1", "Error listing Worksheets." & @CRLF & "@error = " & @error & ", @extended = " & @extended) ;_ArrayDisplay($aWorkSheets, "Excel UDF: _Excel_SheetList Example 1") ;_ArrayDisplay($aWorkSheets, "Array") Global $iRows = UBound($aWorkSheets, $UBOUND_ROWS) ; Total number of rows. In this example it will be 10. Global $iCols = UBound($aWorkSheets, $UBOUND_COLUMNS) ; Total number of columns. In this example it will be 20. Global $iDimension = UBound($aWorkSheets, $UBOUND_DIMENSIONS) ; The dimension of the array e.g. 1/2/3 dimensional. MsgBox($MB_SYSTEMMODAL, "", "The array is a " & $iDimension & " dimensional array with " & _ $iRows & " row(s) & " & $iCols & " column(s).") Dim $checkbox[$iRows] EndFunc ;==>excelsheetlist Func primarygui() ; Create a GUI with various controls. Local $hGUI = GUICreate("Script Controller", 300, ($iRows * 24)) ; Create a checkbox control. ;Local $idCheckbox = GUICtrlCreateCheckbox("Standard Checkbox", 10, 10, 185, 25) Local $Button2 = GUICtrlCreateButton("Close", 210, 200, 85, 25) Local $Button3 = GUICtrlCreateButton("Run", 210, 170, 85, 25) Local $Button1 = GUICtrlCreateButton("Discharge", 210, 140, 85, 25) For $i = 0 To UBound($checkbox) - 1 $checkbox[$i] = GUICtrlCreateCheckbox($aWorkSheets[$i][0], 8, 0 + ($i * 24)) ;, 81, 17) Next ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) ; Loop until the user exits. While 1 $nMsg = GUIGetMsg() Select Case $nMsg = $GUI_EVENT_CLOSE Exit Case $nMsg = $Button2 ;Close Exit Case $nMsg = $Button1 MsgBox(0, "Discharge Button not configured", "Now Exiting") Exit Case $nMsg = $Button3 ;Run $fSelection = False For $i = 0 To UBound($checkbox) - 1 If BitAND(GUICtrlRead($checkbox[$i]), $GUI_CHECKED) Then $fSelection = True ExitLoop EndIf Next If $fSelection Then For $i = 0 To UBound($checkbox) - 1 Assign("status" & $i, GUICtrlRead($checkbox[$i])) Next $batchcount = 0 For $i = 0 To UBound($checkbox) - 1 If Eval("status" & $i) = 1 Then $batchcount = $batchcount + 1 ;Call ("o" & $i & "copy") ; if you want to call the functions directly, remove ; before the call and comment or delete the following DirCopy statement MsgBox(0, "Checking", "Checking that: " & $checkbox[$i] & " no, with title: " & $aWorkSheets[$i][0] & " was selected, Batch count: " & $batchcount) ; if you need only the DirCopy EndIf Next ExitLoop Else MsgBox(48, 'No Items Selected', 'You have not selected any Patients to Load, Please select from the list') EndIf EndSelect WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>primarygui Func _IsChecked($idControlID) Return BitAND(GUICtrlRead($idControlID), $GUI_CHECKED) = $GUI_CHECKED EndFunc ;==>_IsChecked Func batchinitial() If Eval("status" & $i) = 1 Then debugbox() $oWorkbook1.Sheets(1).Activate $bigloop = $bigloop + 1 $sheet = $aWorkSheets[$i][0] $oWorkbook1.Sheets($sheet).Activate debugbox() EndIf EndFunc ;==>batchinitial OpenExcel() excelsheetlist() primarygui() For $i = 0 To UBound($checkbox) - 1 batchinitial() While 1 If Eval("status" & $i) = 0 Then ExitLoop ;all the rest of my script loops etc WEnd Next