NiceBoy1234

Exit loop and continue

4 posts in this topic

I got a while loop, if something happens the while loop shall stop, but shall continue after a specific time like lets say 10 minutes, how would you manage this.

Share this post


Link to post
Share on other sites



NiceBoy1234,

Perhaps TimerInit/TimerDiff... Give more information and you will get a better answer.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

#3 ·  Posted (edited)

Sounds more like you would rather have a pause than an actual ExitLoop, you could create a pause using a timer.

~Melba beat me to it

Edited by InunoTaishou

Share this post


Link to post
Share on other sites

#4 ·  Posted (edited)

A couple loops within a loop will do it.

While True  
    While True
        ; this is where you do your stuff
        ; whatever your condition is to leave the loop
        If True Then
            ExitLoop
        EndIf
    WEnd
    $i = TimerInit()
    While TimerDiff($i)<60000*10 ; 10 minutes
    WEnd
WEnd

 

Edited by jdelaney

IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • nacerbaaziz
      By nacerbaaziz
      hello
      please i need to link a progress bar with a time can you help me?
      e.g
      i want to set a progress bar for 10 sec
      am waiting for your answers
      thank you.
    • imitto
      By imitto
      Hello all!
      I use Autoit for a while, already made some automation for a TV station's master control room with it. I made a UDF to easily work with PAL timecode and time with milliseconds, convert, add or subtract them. Feel free to use it if you want something like this
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Res_Description=PAL Timecode Calculator UDF #AutoIt3Wrapper_Res_LegalCopyright=horvath.imre@gmail.com #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ; ; #FUNCTION# ; Name...........: _tcAdd ; Description....: Returns addition of two timecodes ; Syntax.........: _tcAdd($fTc1, fTc2 [, $fFormat = "P"]) ; ; Parameters.....: $fTc1 - First timecode in hh:mm:ss.ff format ; $fTc2 - Second timecode in hh:mm:ss.ff format ; $fFormat - Time base - "P" (default): PAL (25 fps) ; "M" : millisecond ; ; Return value...: Sum of the two timecode in the selected format Func _tcAdd($fTc1, $fTc2, $fFormat = "P", $fHourFormat = 1) Local $fMs1 = _tcToMs($fTc1) Local $fMs2 = _tcToMs($fTc2) Local $fSumMs = $fMs1 + $fMs2 Return _msToTc($fSumMs, $fFormat, $fHourFormat) EndFunc ; #FUNCTION# ; Name...........: _tcsSub ; Description....: Returns addition of two timecodes ; Syntax.........: _tcSub($fTc1, fTc2 [, $fFormat = "P"]) ; ; Parameters.....: $fTc1 - First timecode in hh:mm:ss.ff format ; $fTc2 - Second timecode in hh:mm:ss.ff format ; $fFormat - Time base - "P" (default): PAL (25 fps) ; "M" : millisecond ; ; Return value...: Subtract $fTc2 from $fTc1 in the source format Func _tcSub($fTc1, $fTc2, $fFormat = "P") Local $fMs1 = _tcToMs($fTc1) Local $fMs2 = _tcToMs($fTc2) Local $fSumMs = $fMs1 - $fMs2 If $fSumMs < 0 Then $fSumMs = _tcToMs("24:00:00.00") - ($fSumMs * -1) EndIf Return _msToTc($fSumMs, $fFormat) EndFunc ; #FUNCTION# ; Name...........: _tcToMs ; Description....: Returns timecode converted to total milliseconds ; Syntax.........: _tcToMs($fTc) ; ; Parameters.....: $fTc - Timecode in hh:mm:ss.ff or hh:mm:ss:xxx format, where xxx are milliseconds ; ; Return value...: Milliseconds as an integer value Func _tcToMs($fTc) Local $fTemp = StringSplit($fTc, ":.") Local $fChr = StringLen($fTemp[4]) Switch $fChr Case 2 Return ($fTemp[4] * 40) + ($fTemp[3] * 1000) + ($fTemp[2] * 60000) + ($fTemp[1] * 3600000) Case 3 Return ($fTemp[4]) + ($fTemp[3] * 1000) + ($fTemp[2] * 60000) + ($fTemp[1] * 3600000) EndSwitch EndFunc ; #FUNCTION# ; Name...........: _msToTc ; Description....: Converts total milliseconds to timecode ; Syntax.........: _msToTc($fIn, $fFormat = "P", $fHourFormat = 1) ; ; Parameters.....: $fIn - Time in milliseconds ; $fFormat - Output format "P": PAL TC (default) ; "M": hh:mm:ss.xxx where xxx are milliseconds ; $fHourFormat - Hour format "1": max. value is 23, then starts from 0 (default) ; "0": hours can be more then 23 ; ; Return value...: Timecode as string in the selected format Func _msToTc($fIn, $fFormat = "P", $fHourFormat = 1) Switch $fFormat Case "P" Local $fFr = StringFormat("%02i", (StringRight($fIn, 3) - Mod(StringRight($fIn, 3), 40)) / 40) Case "M" Local $fFr = StringFormat("%03i", StringRight($fIn, 3)) EndSwitch $fIn = StringTrimRight($fIn, 3) Local $fSec = StringFormat("%02i", Mod($fIn, 60)) $fIn -= $fSec Local $fMinTot = $fIn / 60 Local $fMin = StringFormat("%02i", Mod($fMinTot, 60)) $fIn -= $fMin*60 Local $fHourTot = $fIn / 60 / 60 Switch $fHourFormat Case 1 $fHour = StringFormat("%02i", Mod($fHourTot, 24)) Case 0 $fHour = StringFormat("%02i", $fHourTot) EndSwitch Return($fHour & ":" & $fMin & ":" & $fSec & "." & $fFr) EndFunc ; #FUNCTION# ; Name...........: _tcFormatChange ; Description....: Toggle TC format ; Syntax.........: _tcFormatChange($fTc) ; ; Parameters.....: $fTc - Timecode in hh:mm:ss.ff or hh:mm:ss:xxx format, where xxx are milliseconds ; ; Return value...: PAL timecode or time with milliseconds as string, depends on input Func _tcFormatChange($fTc) Local $fTemp = StringSplit($fTc, ":.") Local $fChr = StringLen($fTemp[4]) Switch $fChr Case 2 Return $fTemp[1]&":"&$fTemp[2]&":"&$fTemp[3]&"."&StringFormat("%03i", $fTemp[4]*40) Case 3 Return $fTemp[1]&":"&$fTemp[2]&":"&$fTemp[3]&"."&StringFormat("%02i", ($fTemp[4]-Mod($fTemp[4], 40))/40) EndSwitch EndFunc And the example script:
      #include<_PAL_TC_Calc.au3> $palTC1 = "00:01:12.20" $palTC2 = "23:59:50.02" $msTC1 = "00:01:12.800" $msTC2 = "23:59:50.120" MsgBox(0, "1", _tcAdd($palTC1, $palTC2)); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns PAL TC format MsgBox(0, "2", _tcAdd($palTC1, $palTC2, "M")); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns time with milliseconds format MsgBox(0, "3", _tcAdd($palTC1, $palTC2, "M", 0)); Adds $palTC1 to $palTC2, hours can be infinite, returns time with milliseconds format MsgBox(0, "4", _tcAdd($msTC1, $msTC2)); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns PAL TC format MsgBox(0, "5", _tcAdd($msTC1, $msTC2, "M")); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns time with milliseconds format MsgBox(0, "6", _tcAdd($msTC1, $msTC2, "M", 0)); Adds $palTC1 to $palTC2, hours can be infinite, returns time with milliseconds format MsgBox(0, "7", _tcSub($palTC2, $palTC1)); Subtract $palTC1 from $palTC2, returns PAL TC format MsgBox(0, "8", _tcSub($palTC2, $palTC1, "M")); Subtract $palTC1 from $palTC2, time with milliseconds format MsgBox(0, "9", _tcSub($msTC1, $msTC2)); Subtract $palTC1 from $palTC2, returns PAL TC format - when hits zero, counts back from 24:00:00.00 MsgBox(0, "10", _tcSub($msTC1, $msTC2, "M")); Subtract $palTC1 from $palTC2, time with milliseconds format - when hits zero, counts back from 24:00:00.000 MsgBox(0, "11", _tcFormatChange($palTC2)); Convert PAL TC to time with milliseconds and back MsgBox(0, "12", _tcFormatChange($msTC2)); Convert PAL TC to time with milliseconds and back  
      TC_CALC_example.au3
      _PAL_TC_Calc.au3
    • 0Ethan0
      By 0Ethan0
      Ahoy Autoit Community!
      After many trials and errors I am unable to solve a problem I am facing and would appreciate any kind of input or better yet a solution 
      The Premise: An embeded slideshow viewer that runs after double-clicking an item in a ListView (each item will generate a different slideshow images).
      The Setup: GUI with a ListView Control and a simple exit button.
      The Issue: Once double clicked the slide plays however the GUI "locks"/non responsive until the slide is over. Same thing if I click on the "Test" button.
      The Culprit: I believe since it's in the images loop it can't accept any other commands until that loop is over.
      The Wish: I want to be able to use the GUI functions (selecting other items, clicking on button etc.) while the slideshow plays.
      The Code (stripped and simplified as much as I could):
      #include <GuiListView.au3> #include <File.au3> #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) HotKeySet("{Esc}", "_Exit") Global $c=0 Global $ssGDI[3], $ssGraphic[2], $ssImage Global Const $bg_color = "000000" Global Const $ssW = 480, $ssH = 320 Global $aFiles = _FileListToArrayRec("d:\testStage\", "*.jpg;*.png;*.bmp;*.gif;*.JPG;*.PNG;*.BMP;*.GIF", $FLTAR_FILES, $FLTAR_NORECUR ,$FLTAR_SORT ,$FLTAR_FULLPATH ) $guiW = 1200 $guiH = 726 $mainWindow = GUICreate("Slideshow Viewer", $guiW, $guiH, -1, -1, $WS_POPUP) $Button1 = GUICtrlCreateButton("Exit", 0, 0, 50, 50) GUICtrlSetOnEvent($Button1, "_Exit") $Button1 = GUICtrlCreateButton("Test", 60, 0, 50, 50) GUICtrlSetOnEvent($Button1, "Test") Global $ListView = GUICtrlCreateListView("Entry Name|Category", 5, 75, 195, 280) _GUICtrlListView_SetColumnWidth ($ListView, 0, 100) _GUICtrlListView_SetColumnWidth ($ListView, 1, 100) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT) GUICtrlCreateListViewItem("Name 1|Category 1", $ListView) GUICtrlCreateListViewItem("Name 2|Category 2", $ListView) screenshotWidgetInit($ssW,$ssH, 690, 100) GUISetState(@SW_SHOW, $mainWindow) GUIRegisterMsg($WM_NOTIFY, "WM_Notify_Events") While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE _Exit() EndSwitch WEnd Func Test() For $k = 1 To UBound($aFiles) - 1 screenshotWidgetTransition($aFiles[$k]) Next EndFunc Func ListView_Click() ConsoleWrite("Left Click") EndFunc Func ListView_DoubleClick() ConsoleWrite("Double Left Click") Test() EndFunc Func WM_Notify_Events($hWndGUI, $MsgID, $wParam, $lParam) #forceref $hWndGUI, $MsgID, $wParam Local $tagNMHDR, $event, $hwndFrom, $code $tagNMHDR = DllStructCreate("int;int;int", $lParam) If @error Then Return $event = DllStructGetData($tagNMHDR, 3) Select Case $wParam = $ListView Select Case $event = $NM_CLICK ListView_Click () Case $event = $NM_DBLCLK ListView_DoubleClick () EndSelect EndSelect Return $GUI_RUNDEFMSG EndFunc Func screenshotWidgetTransition($image, $delay = 0, $speed = 1, $sleep = 2000) Local $a, $d = $c, $iX, $iY $ssImage = _GDIPlus_ImageLoadFromFile($image) $iX = _GDIPlus_ImageGetWidth($ssImage) $iY = _GDIPlus_ImageGetHeight($ssImage) $FDesktop=$ssH/$ssW $Fact =1 If $iX > $ssW And $FDesktop > ($iY/$iX) Then $Fact=$ssW/$iX ElseIf $iY > $ssH Then $Fact=$ssH/$iY EndIf $H1 = Round(($Fact * $iY),0) $W1 = Round(($Fact * $iX),0) _GDIPlus_GraphicsDrawImageRect($ssGraphic[$d], $ssImage,($ssW - $W1)/2, ($ssH - $H1) / 2,$W1,$H1) WinSetTrans($ssGDI[$d], "", 0) WinSetOnTop($ssGDI[$d], "", 1) For $a = 0 To 254 Step $speed WinSetTrans($ssGDI[$d], "", $a) Sleep($delay) Next WinSetTrans($ssGDI[$d], "", 254) WinSetOnTop($ssGDI[Not ($d)], "", 0) WinSetTrans($ssGDI[Not ($d)], "", 0) _GDIPlus_GraphicsClear($ssGraphic[Not ($d)]) $c = 1 - $d _GDIPlus_ImageDispose ($ssImage) ; very important to realease the pics Sleep($sleep) EndFunc ;==>screenshotWidgetTransition Func screenshotWidgetInit($ssW,$ssH,$ssX,$ssY) $ssGDI[2] = GUICreate("", $ssW, $ssH, $ssX, $ssY, $WS_POPUP, $WS_EX_MDICHILD, $mainWindow) $ssGDI[0] = GUICreate("", $ssW, $ssH, 3, 3, $WS_POPUP, $WS_EX_MDICHILD, $ssGDI[2]) $ssGDI[1] = GUICreate("", $ssW, $ssH, 3, 3, $WS_POPUP, $WS_EX_MDICHILD, $ssGDI[2]) ; GUISetBkColor("0x" & $bg_color, $ssGDI[2]) GUISetState(@SW_SHOW, $ssGDI[2]) GUISetState(@SW_SHOW, $ssGDI[0]) GUISetState(@SW_SHOW, $ssGDI[1]) WinSetTrans($ssGDI[0], "", 0) WinSetTrans($ssGDI[1], "", 0) _GDIPlus_Startup() $ssGraphic[0] = _GDIPlus_GraphicsCreateFromHWND($ssGDI[0]) $ssGraphic[1] = _GDIPlus_GraphicsCreateFromHWND($ssGDI[1]) _GDIPlus_GraphicsClear($ssGraphic[0], "0xFF" & $bg_color) _GDIPlus_GraphicsClear($ssGraphic[1], "0xFF" & $bg_color) EndFunc ;==>screenshotWidgetInit Func _Exit() _GDIPlus_ImageDispose($ssImage) _GDIPlus_GraphicsDispose($ssGraphic[0]) _GDIPlus_GraphicsDispose($ssGraphic[1]) GUIDelete($ssGDI[0]) GUIDelete($ssGDI[1]) GUIDelete($ssGDI[2]) _GDIPlus_Shutdown() Exit EndFunc ;==>_Exit I hope someone can shed light on this; perhaps a different approach is needed?
      Thank you in advance!
      P.S.
      The script is patched from different scripts of different users in the forum - thank you again users!
    • Patryk
      By Patryk
      Dear Colleagues,
      I have no idea how to refer to style.display in my loop. There is a button like: 
      <input name="ctl00$bodyPlaceholder$btnFecharProcessamento" class="button" id="bodyPlaceholder_btnFecharProcessamento" style="display: none;" onclick="FecharJanelaProcessamento();return false;" type="submit" value="Fechar"> I want it to be clicked as soon as button's style change from style="display: none;" to  style= ="display: inline-block;" 
      This is what I got, but it's not working...
      Func GetButtons() $oButtons = _IEGetObjByName($oForm,"ctl00$bodyPlaceholder$btnFecharProcessamento",-1) $i = 0 While $i <> 1 For $oBtn In $oButtons If _IEFormElementGetValue($oBtn) = "Fechar" And $oBtn.document.style.display = "display: inline-block;" Then $i = 1 _IEAction($oBtn, "focus") _IEAction($oBtn, "click") ExitLoop EndIf Next WEnd EndFunc  
      I will really appreciate if you could help me with these loop!
    • Nareshm
      By Nareshm
      How to repeat my script when my control class does not match ?
       
      My Script : winActivate ( " PS :: Version - 2.2.0.0  - [PS Bill]")                   ControlClick ( "PS :: Version - 2.2.0.0  - [PS Bill]", "", "[NAME:btnSavebyFP]")                   ControlSend(" PS :: Version - 2.2.0.0  - [PS Bill]", "", "[NAME:btnSavebyFP]", "{enter}")                   WinActive ("Verification Number Entry ::")                   ControlClick("Next >", "","[NAME:btnNext]") ;if   >>>> Control <<<<  does not match repeat my script, ;if match exit script  

      Class:    WindowsForm734a
      Instance:    15
      ClassnameNN:    WindowsForm34a15
      Name:    BillPrint
      Advanced (Class):    [NAME:BillPrint]
      ID:    7875
      Text:    
      Position:    39, 310
      Size:    1221, 306
      ControlClick Coords:    745, 20
      Style:    0x56010000
      ExStyle:    0x00000000
      Handle:    0x00000000000C0468