Jump to content

Recommended Posts

Hello,

I need to assign data to array:

Global $Test[3][4]
$Array = "Test"
SetArrayData($Array,"Hello world!",1,3)
ConsoleWrite($Array[1][3]&@CRLF)
Exit
Func SetArrayData($Array,$Data,$1,$2)
    $Array[$1][$2] = $Data; <-- ???
EndFunc

I need that somebody would help me with that function :)

Edited by algiuxas

Share this post


Link to post
Share on other sites

You're trying to assign a value to an array that is not actually an array?

You'll need to test if the variable being passed is an array or not. If it's not then create a temporary array and assign it ByRef.

#include <Array.au3>

Global $aTest1[3][4]
Global $sTest2 = "Test"
Global $aTest3[1]

SetArrayData($aTest1, "This is Row 2, Column 3", 2, 3)
If (@Error) Then SetArrayError(@Error, "$aTest1")
SetArrayData($sTest2, "This is Row 9, Column 3", 9, 3)
If (@Error) Then SetArrayError(@Error, "$sTest2")
SetArrayData($aTest3, "This is Row 2, Column 2", 2, 2, False)
If (@Error) Then SetArrayError(@Error, "$aTest3")

_ArrayDisplay($aTest1)
_ArrayDisplay($sTest2)
_ArrayDisplay($aTest3)


Func SetArrayData(ByRef $aArray, Const ByRef $sData, Const ByRef $iRow, Const ByRef $iColumn, Const $ReDim = True)
    If (Not IsArray($aArray)) Then
        ConsoleWrite("$aArray is not an array" & @LF)
        If (Not $ReDim) Then Return SetError(-1, 0, False)
        Local $aTemp[$iRow + 1][$iColumn + 1]
        $aArray = $aTemp
        ConsoleWrite("Converted $aArray to proper array" & @LF)
    EndIf

    If ($iRow >= UBound($aArray, $UBOUND_ROWS)) Then
        ConsoleWrite("Assigning to row " & $iRow & " when rows in $aArray are " & UBound($aArray, $UBOUND_ROWS) & " | Index out of range" & @LF)
        If (Not $ReDim) Then Return SetError(1, 0, False)
        ReDim $aArray[$iRow + 2][$iColumn + 1]
        ConsoleWrite("Increased $aArray row count to " & UBound($aArray, $UBOUND_ROWS) & @LF)
    EndIf

    If ($iColumn >= UBound($aArray, $UBOUND_COLUMNS)) Then
        ConsoleWrite("Assigning to column " & $iColumn & " when columns in $aArray are " & UBound($aArray, $UBOUND_COLUMNS) & " | Index out of range" & @LF)
        If (Not $ReDim) Then Return SetError(2, 0, False)
        ReDim $aArray[$iRow + 1][$iColumn + 2]
        ConsoleWrite("Increased $aArray column count to " & UBound($aArray, $UBOUND_COLUMNS) & @LF)
    EndIf

    $aArray[$iRow][$iColumn] = $sData
    Return True
EndFunc

Func SetArrayError($iError, $sVar)
    Switch ($iError)
        Case -1
            MsgBox("", "SetArrayData Error", $sVar & " passed to SetArrayData was not an actual Array and $ReDim was set to false")
        Case 1
            MsgBox("", "SetArrayData Error", "Row passed to SetArrayData was out of range for the variable " & $sVar & " and $ReDim was set to false")
        Case 1
            MsgBox("", "SetArrayData Error", "Column passed to SetArrayData was out of range for the  " & $sVar & " and $ReDim was set to false")
    EndSwitch
EndFunc

 

Share this post


Link to post
Share on other sites
23 minutes ago, InunoTaishou said:

You're trying to assign a value to an array that is not actually an array?

You'll need to test if the variable being passed is an array or not. If it's not then create a temporary array and assign it ByRef.

#include <Array.au3>

Global $aTest1[3][4]
Global $sTest2 = "Test"
Global $aTest3[1]

SetArrayData($aTest1, "This is Row 2, Column 3", 2, 3)
If (@Error) Then SetArrayError(@Error, "$aTest1")
SetArrayData($sTest2, "This is Row 9, Column 3", 9, 3)
If (@Error) Then SetArrayError(@Error, "$sTest2")
SetArrayData($aTest3, "This is Row 2, Column 2", 2, 2, False)
If (@Error) Then SetArrayError(@Error, "$aTest3")

_ArrayDisplay($aTest1)
_ArrayDisplay($sTest2)
_ArrayDisplay($aTest3)


Func SetArrayData(ByRef $aArray, Const ByRef $sData, Const ByRef $iRow, Const ByRef $iColumn, Const $ReDim = True)
    If (Not IsArray($aArray)) Then
        ConsoleWrite("$aArray is not an array" & @LF)
        If (Not $ReDim) Then Return SetError(-1, 0, False)
        Local $aTemp[$iRow + 1][$iColumn + 1]
        $aArray = $aTemp
        ConsoleWrite("Converted $aArray to proper array" & @LF)
    EndIf

    If ($iRow >= UBound($aArray, $UBOUND_ROWS)) Then
        ConsoleWrite("Assigning to row " & $iRow & " when rows in $aArray are " & UBound($aArray, $UBOUND_ROWS) & " | Index out of range" & @LF)
        If (Not $ReDim) Then Return SetError(1, 0, False)
        ReDim $aArray[$iRow + 2][$iColumn + 1]
        ConsoleWrite("Increased $aArray row count to " & UBound($aArray, $UBOUND_ROWS) & @LF)
    EndIf

    If ($iColumn >= UBound($aArray, $UBOUND_COLUMNS)) Then
        ConsoleWrite("Assigning to column " & $iColumn & " when columns in $aArray are " & UBound($aArray, $UBOUND_COLUMNS) & " | Index out of range" & @LF)
        If (Not $ReDim) Then Return SetError(2, 0, False)
        ReDim $aArray[$iRow + 1][$iColumn + 2]
        ConsoleWrite("Increased $aArray column count to " & UBound($aArray, $UBOUND_COLUMNS) & @LF)
    EndIf

    $aArray[$iRow][$iColumn] = $sData
    Return True
EndFunc

Func SetArrayError($iError, $sVar)
    Switch ($iError)
        Case -1
            MsgBox("", "SetArrayData Error", $sVar & " passed to SetArrayData was not an actual Array and $ReDim was set to false")
        Case 1
            MsgBox("", "SetArrayData Error", "Row passed to SetArrayData was out of range for the variable " & $sVar & " and $ReDim was set to false")
        Case 1
            MsgBox("", "SetArrayData Error", "Column passed to SetArrayData was out of range for the  " & $sVar & " and $ReDim was set to false")
    EndSwitch
EndFunc

 

Thank You, but what I need to do if it's just array name? Example:

;...
Global $Array1[3][4]
Global $Array2[3][4]
Global $Array3[3][4]
;...
For $i = 1 to 3
    SetArrayData("Array"&$i,$i,1,1)
Next
;Random...
For $i = 1 to 3
    SetArrayData("Array"&Random(1,3,1),"Hello world!",Random(0,2,1),Random(0,3,1))
Next
;...

No, I'm not trying to assign a value to an array that is not actually an array.

Edited by algiuxas

Share this post


Link to post
Share on other sites

I think this is kind of what you're trying to accomplish then? Using Assign and Eval. You can't assign it in the actual function itself because you're trying to use the variables as strings. Eval and Assign don't actually assign/eval values in arrays, they just work on the variable itself. If you use Eval you can get the whole array, but you can't use ByRef in the SetArrayData function. Instead, return an array and use Assign to do what you want.

#include <Array.au3>

Global $aTest1
Global $aTest2
Global $aTest3
Global $ReDimArray[] = [False, True, True, False]

For $i = 1 to 3
    Local $iRow = Random(0, 4, 1)
    Local $iColumn = Random(0, 4, 1)
    Assign("aTest" & $i, SetArrayData(Eval("aTest" & $i), "This is Row " & $iRow & ", Column " & $iColumn & " for array $aTest" & $i, $iRow, $iColumn))
Next

_ArrayDisplay($aTest1, "$aTest1")
_ArrayDisplay($aTest2, "$aTest2")
_ArrayDisplay($aTest3, "$aTest3")

Func SetArrayData($aArray, Const ByRef $sData, Const ByRef $iRow, Const ByRef $iColumn, Const $ReDim = True)
    If (Not IsArray($aArray)) Then
        ConsoleWrite("$aArray is not an array" & @LF)
        If (Not $ReDim) Then Return SetError(-1, 0, False)
        Local $aTemp[$iRow + 1][$iColumn + 1]
        $aArray = $aTemp
        ConsoleWrite("Converted $aArray to proper array" & @LF)
    EndIf

    If ($iRow >= UBound($aArray, $UBOUND_ROWS)) Then
        ConsoleWrite("Assigning to row " & $iRow & " when rows in $aArray are " & UBound($aArray, $UBOUND_ROWS) & " | Index out of range" & @LF)
        If (Not $ReDim) Then Return SetError(1, 0, False)
        ReDim $aArray[$iRow + 2][$iColumn + 1]
        ConsoleWrite("Increased $aArray row count to " & UBound($aArray, $UBOUND_ROWS) & @LF)
    EndIf

    If ($iColumn >= UBound($aArray, $UBOUND_COLUMNS)) Then
        ConsoleWrite("Assigning to column " & $iColumn & " when columns in $aArray are " & UBound($aArray, $UBOUND_COLUMNS) & " | Index out of range" & @LF)
        If (Not $ReDim) Then Return SetError(2, 0, False)
        ReDim $aArray[$iRow + 1][$iColumn + 2]
        ConsoleWrite("Increased $aArray column count to " & UBound($aArray, $UBOUND_COLUMNS) & @LF)
    EndIf

    $aArray[$iRow][$iColumn] = $sData
    Return $aArray
EndFunc

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By nooneclose
      I was running my script and everything was working fine and then it just stopped working. 
      I got this error message:
      !>12:51:55 AutoIt3.exe ended.rc:-1073741819 +>12:51:55 AutoIt3Wrapper Finished. >Exit code: 3221225477 Time: 354.6 I looked that error up and this article (https://www.autoitscript.com/trac/autoit/ticket/2541) said it was fixed a long time ago. 
      I am using version: SciTE Version 4.1.0, how am I getting this error? (first time I got it after running my code 50+ times)
      it crashed while trying to loop through emails. 
      Full output log:
      >"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" /run /prod /ErrorStdOut /in "C:\" /UserParams +>12:46:01 Starting AutoIt3Wrapper v.18.708.1148.0 SciTE v.4.1.0.0 Keyboard:00000409 OS:WIN_10/ CPU:X64 OS:X64 Environment(Language:0409) CodePage:0 utf8.auto.check:4 +> SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE >Running AU3Check (3.3.14.5) from:C:\Program Files (x86)\AutoIt3 +>12:46:01 AU3Check ended.rc:0 >Running:(3.3.14.5): --> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop Action 1: Create a connection to the outlook account at line: 192 Action 1: Finished at line: 205 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Current email has been changed from Unread to Read. at line: 238 Current email has been changed from Unread to Read. at line: 238 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 3: Store vaild E-mails at line: 258 Number of unread E-mails: 17 at line: 290 Action 3: Finished at line: 292 Current number of processed Emails is: 0 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Opening a new Chrome window. at line: 2747 Action 8: Open Web Browser at line: 2240 _WDStartup: "MicrosoftWebDriver.exe" --verbose Action 8: Finished at line: 2270 Action 9: Navigate to Work Order Tracking at line: 2281 Action 9: Finished at line: 2295 Action 10: Click on Create New Work Order at line: 2306 Action 10: Finished Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660308 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 1 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660309 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 2 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660310 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 3 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660311 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 4 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660312 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 5 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660313 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 6 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: YT6508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660314 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 7 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: CN2116 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660315 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 8 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: DT4905 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660316 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 9 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: YT6513 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 Young Tower has no suites! Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660317 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 10 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: BT3310 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660318 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 11 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: BT3411 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660319 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 12 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: DT4519 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660320 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 13 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 !>12:51:55 AutoIt3.exe ended.rc:-1073741819 +>12:51:55 AutoIt3Wrapper Finished. >Exit code: 3221225477 Time: 354.6  
    • By SkysLastChance
      I am trying to figure out why my mouse move does not end up in the same spot as the test version
      I am on the struggle bus. (Both Examples below)
      #include <IE.au3> Local $xWidth = 2 Local $xHeight = 2 Local $vOperator = '/' Local $oIE = _IE_Example("form") Local $oForm = _IEFormGetObjByName($oIE, "ExampleForm") Local $oTextArea = _IEGetObjByName($oForm, "imageExample") Local $iScreenX = _IEPropertyGet($oTextArea, "screenx") Local $iScreenY = _IEPropertyGet($oTextArea, "screeny") Local $iWidth = _IEPropertyGet($oTextArea, "width") Local $iHeight = _IEPropertyGet($oTextArea, "height") Local $iMousespeed = 20 MouseMove($iScreenX + $iWidth / 2, $iScreenY + $iHeight / 2, $iMousespeed) ;Test Example ;;MouseMove(Execute(($iScreenX + $iWidth) & $vOperator & $xWidth), Execute(($iScreenY + $iHeight) & $vOperator & $xHeight), 25) ;My Example  
    • By VinMe
      I am unable to execute the below script, my requirement is to copy the content from active excel sheet and to display the same.
      Please let me know where i am missing!
      #include <Excel.au3>
      #include <MsgBoxConstants.au3>
      #include <Array.au3>
      #include <StringConstants.au3>
      Local $oExcel = _Excel_Open()
      $LastRow2 = $oExcel.UsedRange.Rows.Count
      $Tissue = _Excel_RangeRead($oExcel, Default, "E1:E" & $LastRow2)
      $TshNr = _Excel_RangeRead($oExcel, Default, "F1:F" & $LastRow2)
      _ArrayDisplay($Tissue)
      _ArrayDisplay($TshNr)
    • By uncommon
      So I have been reading on how to use OAuth2 Service accounts(https://developers.google.com/identity/protocols/OAuth2ServiceAccount) and ran into an issue with autoit I can not solve. To keep this short to communicate to the Google API I need to use a JSON Web signature containing
      {Base64url encoded header}.{Base64url encoded claim set}.

      The Header and claim set work fine but I do not know how to convert them to a byte array using autoit. I have looked around on the forums and website but have not found anything that seems to work. Here is my code.
      #include-once #include <Array.au3> #include <Constants.au3> #include <Debug.au3> #include <File.au3> #include "Json.au3" #include <Process.au3> #include <ProgressConstants.au3> #include <String.au3> #include <WindowsConstants.au3> #include "WinHttp.au3" #include <UnixTime.au3> #include <StringConstants.au3> Global $UnixTime = _TimeGetStamp() $sJWTheader = '{"alg":"RS256","typ":"JWT"}' $sJWTclaimset = '{"iss":"Removed@forprivacy.com","scope":"https://www.googleapis.com/auth/spreadsheets","aud":"https://www.googleapis.com/oauth2/v4/token","exp":' & $UnixTime + 3600 & ',"iat":' & $UnixTime & '}' Local $taiData = DllStructCreate("BYTE[256]") Local $sText = _base64($sJWTheader)&'.'&_base64($sJWTclaimset) DllStructSetData($taiData, 1, StringToBinary($sText, 4)) Local $bvResult = DllStructGetData($taiData, 1) $sJWTSigature = $bvResult $sJWT = _base64($sJWTheader)&'.'&_base64($sJWTclaimset)&'.'&_base64($sJWTSigature) $POSTHeader = "Content-Type: application/x-www-form-urlencoded" $hOpen = _WinHttpOpen() $hConnect = _WinHttpConnect($hOpen, "https://www.googleapis.com/") $sRead = _WinHttpSimpleSSLRequest($hConnect, "POST", "oauth2/v4/token", Default, "grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Ajwt-bearer&assertion=" & $sJWT) _WinHttpCloseHandle($hConnect) _WinHttpCloseHandle($hOpen) ConsoleWrite($sRead & @LF) The whole bytes thing is beyond with what I know about auotit. I can't tell what I need to fix.
       
       
    • By JackER4565
      Hi, first of all thanks to all the guys who always help people in the forums, I wouldn't be able to do anything if wasn't for your help, even if I don't ask it myself.
       
      I've created this code to get some info on a monitoring network on my work. It relays on _IETableGetCollection and _IETableWriteToArray.
      It works well, but take around 3:25 minutes to get the info from 28 pages (some of them are large and take longer to load, but most of them are small and fast).
      My question is if you see a way to get the program to go faster...
       
      I've tried to make it easy for you to understand and edited somethings with sensitive info.
      (Some of the pages doesn't have the black divider with MIRA in the end, so I need to search if it is there or not.)
       
      #include <IE.au3> #include <array.au3> Local $oIE = _IECreate("about:blank", 0, 0) Local $paginas[28] = [89, 90, 91, 92, 93, 96, 105, 113, 119, 125, 126, 129, 131, 133, 135, 137, 139, 140, 141, 144, 145, 146, 148, 149, 150, 151, 158, 159] Local $Datos_array[0][2] Local $oTable Local $tabla Local $aux_x = 1 Local $ar = 1 Local $Numtables_datos = 0 MsgBox(0, "asd", "asd") For $pag = 0 To UBound($paginas) - 1 Step 1 _IENavigate($oIE, "<WEBSITE URL>" & $paginas[$pag]) ; <<< the pages to load are always the same except for the last digits. _ArrayAdd($Datos_array, $paginas[$pag] & "|" & "Entrante", 0, "|") ; <<<<<<<<<<<<<<<< adds the page number toarray [0, 0] ;############################################ START counts amount of tables with traffic $oTable = _IETableGetCollection($oIE) Local $iNumTables = @extended For $i = 3 To $iNumTables - 2 Step 1 $oTable = _IETableGetCollection($oIE, $i) $nomb_tabla2 = _IETableWriteToArray($oTable) ; <<<<<<<< TABLE TO ARRAY. $string2 = StringStripWS($nomb_tabla2[1][0], 8) If $string2 <> "MIRA" Then $Numtables_datos = $Numtables_datos + 1 Next $tabla_End = $iNumTables - $Numtables_datos ;############################################ FIN $tabla_Start = 4 $tabla_trafico = 2 For $for = 1 To $Numtables_datos Step 1 $oTable = _IETableGetCollection($oIE, $tabla_Start - 1) ; <<<<<<<<<<< NAME OF THE TABLE; row2 = mira $nomb_tabla = _IETableWriteToArray($oTable) ; <<<<<<<< TABLE TO ARRAY ;########################################### ADDS the traffic number into the row $string = StringStripWS($nomb_tabla[1][0], 8) If $string == "MIRA" Then ;si o si pasa por aca 1 vez _ArrayAdd($Datos_array, $nomb_tabla[0][0]) $nomb_aux = $nomb_tabla[0][0] $aux_x = 1 $tabla_trafico = $tabla_trafico + 2 Else ;esto deberia ser por row _ArrayAdd($Datos_array, $nomb_aux & " " & $aux_x) $aux_x = $aux_x + 1 $tabla_trafico = $tabla_trafico + 1 EndIf $oTable = _IETableGetCollection($oIE, $tabla_trafico) Local $aTableData = _IETableWriteToArray($oTable) $bps = _ArrayToString($aTableData, "|", 0, 0, @CRLF, 0, 0) $bps = StringRight($bps, 5) $bps = StringLeft($bps, 4) $trafico_actual = _ArrayToString($aTableData, "|", 0, 0, @CRLF, 2, 2) If $bps == "Gbps" Then $trafico_actual = $trafico_actual * 1000 If $bps == "Kbps" Then $trafico_actual = $trafico_actual / 1000 $Datos_array[$ar][1] = $trafico_actual $ar = $ar + 1 If $string == "MIRA" Then $tabla_Start = $tabla_Start + 2 Else $tabla_Start = $tabla_Start + 1 EndIf Next $ar = $ar + 1 ;~ ############# CAÍDA ############ ;~ If $actual_entrante = 0 Then ;~ $xxx = 0 ;~ Do ;~ MsgBox(0, "Tráfico Caído", $paginas[$i], 5) ;~ $xxx = $xxx + 1 ;~ Until $xxx = 10 ;~ EndIf ;~ ############# CAÍDA ############. Local $Numtables_datos = 0 Next _ArrayDisplay($Datos_array, "Array display") _IEQuit($oIE) Thanks!! 


      monitoria.html
×
×
  • Create New...