manual mapping possible with autoit?
By
Vivi, in AutoIt General Help and Support
-
Similar Content
-
By nooneclose
I forgot an important and needed aspect of my code. I need to be able to check for people who work every other week. Is it possible to write the dates that they work (every other week) between two date ranges?
Example: Bob Smith has a Start date of 8-26-2018 (that is the date he is hired) And He stops working on 12-12-18 (that's the day he goes on vacation or whatever) However his work shift is every other Saturday from 7:30 AM to 6:00 Pm. I need to calculate every other Saturday between 8-26-18 and 12-12-18 (is this clear?)
here is the code I have so far. I am just missing this last part:
; Step 7 Func SendData() ;******************************************************************************* ; Sends all collected data to the Excel file in correct order for Upload ;******************************************************************************* MsgBox($MB_ICONINFORMATION, "Scheduler_Bot", "Sending Data", 2) ; Loop Counters $LoopCount = 0 $Array_Index = 0 $DayIndex = 0 $dataIndex = 0 ; Counter for the day of the week Local $dCount = 2 ; Counter for the numbers of Ys Local $yesCount = 0 ; Excel Write Counter (VERY IMPORTANT!) Local $EWriteCount = 2 ; Declare the global shift arrays (Sunday - Saturday) Global $ShiftDaySU[100][600] Global $ShiftDayM[100][600] Global $ShiftDayT[100][600] Global $ShiftDayW[100][600] Global $ShiftDayR[100][600] Global $ShiftDayF[100][600] Global $ShiftDayS[100][600] Global $sDates[400] While $Formatted_Names[$dataIndex] <> $Formatted_Names[$IndexRows] ; $LoopCount < $IndexRows $ACounter = 0 ; Array counter ; Gets the Start date from the array $Temp = $StartDate[$Array_Index] $TempStart = StringLeft($Temp, 8) $StartTempYear = StringLeft($TempStart, 4) $StartTempMonth = StringMid($TempStart, 5, 2) $StartTempDay = StringRight($TempStart, 2) ; Gets the End date from the array $Temp = $EndDate[$Array_Index] $TempEnd = StringLeft($Temp, 8) $EndTempYear = StringLeft($TempEnd, 4) $EndTempMonth = StringMid($TempEnd, 5, 2) $EndTempDay = StringRight($TempEnd, 2) ; The starting date (in value form) $sdate = _DateToDayValue($StartTempYear, $StartTempMonth, $StartTempDay) ;_DateToDayValue(2019,1,9) ;ConsoleWrite(@CRLF & "$start date " & $sdate & @CRLF & @CRLF) ; The ending date (in value form) $edate = _DateToDayValue($EndTempYear, $EndTempMonth, $EndTempDay) ;_DateToDayValue(2019,4,9) ;ConsoleWrite(@CRLF & "$end date " & $edate & @CRLF & @CRLF) ; Variables for readability Local $iYear, $iMonth, $iDay ;Stores what day of the week that shift lands on Local $tSU = _Excel_RangeRead($OpenWorkbook, Default, "I" & $dCount) If $tSU = "Y" Then $yesCount = 1 EndIf Local $tM = _Excel_RangeRead($OpenWorkbook, Default, "J" & $dCount) If $tM = "Y" Then $yesCount += 1 EndIf Local $tT = _Excel_RangeRead($OpenWorkbook, Default, "K" & $dCount) If $tT = "Y" Then $yesCount += 1 EndIf Local $tW = _Excel_RangeRead($OpenWorkbook, Default, "L" & $dCount) If $tW = "Y" Then $yesCount += 1 EndIf Local $tR = _Excel_RangeRead($OpenWorkbook, Default, "M" & $dCount) If $tR = "Y" Then $yesCount += 1 EndIf Local $tF = _Excel_RangeRead($OpenWorkbook, Default, "N" & $dCount) If $tF = "Y" Then $yesCount += 1 EndIf Local $tS = _Excel_RangeRead($OpenWorkbook, Default, "O" & $dCount) If $tS = "Y" Then $yesCount += 1 EndIf ConsoleWrite(@CRLF & @CRLF) ConsoleWrite($tSU & @CRLF) ConsoleWrite($tM & @CRLF) ConsoleWrite($tT & @CRLF) ConsoleWrite($tW & @CRLF) ConsoleWrite($tR & @CRLF) ConsoleWrite($tF & @CRLF) ConsoleWrite($tS & @CRLF) ConsoleWrite(@CRLF & @CRLF) ; Check to see if they work every other week Local $rotationWeek = _Excel_RangeRead($OpenWorkbook, Default, "U" & $dCount) If $rotationWeek = "0" Then ; Do nothing Else If $rotationWeek = 1 ; Do something Else ; $rotationWeek = 2 ; Do something EndIf EndIf Local $repeatWeek = _Excel_RangeRead($OpenWorkbook, Default, "V" & $dCount) If $rotationWeek = "0" Then ; Do nothing Else If $rotationWeek = 1 ; Do something Else ; $rotationWeek = 2 ; Do something EndIf EndIf While $yesCount > 0 If $tSU = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 1 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDaySU[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDaySU[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "SU " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Sunday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tSU = "N" ElseIf $tM = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 2 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayM[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayM[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "M " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Monday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tM = "N" ElseIf $tT = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 3 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayT[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayT[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "T " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Tuesday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tT = "N" ElseIf $tW = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 4 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayW[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayW[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "W " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Wednesday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tW = "N" ElseIf $tR = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 5 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayR[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayR[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "R " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Thursday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tR = "N" ElseIf $tF = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 6 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayF[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayF[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "F " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Friday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tF = "N" ElseIf $tS = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 7 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayS[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayS[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "S " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Saturday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tS = "N" Else ;Error Nothing equals "Y" ConsoleWrite(@CRLF & "Error Nothing equals 'Y'" & @CRLF) EndIf $DayIndex += 1 $LoopCount += 1 WEnd $Array_Index += 1 $dataIndex += 1 $dCount += 1 WEnd MsgBox($MB_ICONINFORMATION, "Scheduler_Bot", "Finished Sending Data", 2) EndFunc
-
By Fertum
In the file 1.txt in the first line there is an inscription, and it changes over time. In the GUI, it should also be changed.How to make it not flicker?
Local $Form1 = GUICreate('Form1', 261, 200, 192, 124) $10 = FileReadLine ( "1.txt", 1); GUISetState() Local $spic = $10, $Pic1 While 1 $Pic1 = GUICtrlCreateLabel($10, 10, 70, 235, 50) Switch FileExists($spic) Case 0 If $Pic1 Then GUICtrlDelete($Pic1) $Pic1 = 0 EndIf Case 1 If Not $Pic1 Then $Pic1 = GUICtrlCreateLabel($spic, 16, 24, 212, 124) EndSwitch Sleep(1) WEnd
-
By gahhon
Is there any resource/sample to generating a fancy report?
I was downloaded this resource and try the example, but it failed to execution due to function not define. PDF
My simple idea of generating the report would be like this:-
Read data from excel instead of database, then generate PDF report based on my custom design.
Any better ideas is much appreciate to share with me here
Thanks.
-
By gahhon
While Not _Login() _Login() WEnd _Initial_Check() GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $GUI_CLOSE_BUTTON, $BTN_EXIT _GUIDisable($GUI_MAIN, 0, 30) _Close_Application() EndSwitch WEnd ; #FUNCTION# ==================================================================================================================== ; Name ..........: _Password_Check ; Description ...: To check against the input with the password file ; =============================================================================================================================== Func _Password_Check() Local $IN_PASSWORD = _Metro_InputBox("Please Enter Your Password:" , 11, "", True, True) If @error Then Return SetError(1, 0, "") ElseIf $PASSWORD <> $IN_PASSWORD Then Return SetError(2, 0, "Access Denied!") Else Return True EndIf EndFunc ; #FUNCTION# ==================================================================================================================== ; Name ..........: _Login ; Description ...: Login ; =============================================================================================================================== Func _Login() Local $FLAG_LOGIN = _Password_Check() If @error = 1 Then _Close_Application() ElseIf @error = 2 Then _Metro_MsgBox(0, "", $FLAG_LOGIN) Return False Else _Metro_MsgBox(0, "", "Access Granted!") Return True EndIf EndFunc When the application start, it will prompt for password for login.
I entered several wrong password, it shows "Access Denied!" and re-prompt for password for login.
Then I entered the correct one, it shows "Access Granted!" but it still re-prompt for password for login.
Any idea what's wrong? Thanks
-
By gahhon
#Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Icon=..\..\Downloads\ALlogo.ico #AutoIt3Wrapper_Compile_Both=y #AutoIt3Wrapper_UseX64=y #AutoIt3Wrapper_Res_HiDpi=y #AutoIt3Wrapper_Run_Au3Stripper=y #Au3Stripper_Parameters=/so /rm /pe #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** I found out that a lot of sources provided by AutoIT members like what I am recently using is the Metro UDF.
On top of it, it always written the Region of code and red color. Then it also assign some value into some variable.
May I know, what are their use and what is the purpose of doing?
If I remove them, will affect the application?
Thanks
-