Comboku

Exit function from "outsite" with button press

3 posts in this topic

Hi Guys,

I have written a little loop program that counts to whatever you choose in "Rounds". 

(this is just a short version of my program, but it should cover what I try to achieve)

I now want to be able to stop the counting by pressing the start/stop button. Unfortunately, autoit only registers my click on my button AFTER the func has ended.

Do you guys have an idea how to stop the function? Maybe check if button was pressed in the loop? 

Thanks,

Comboku

 

 

 

#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <StaticConstants.au3>
#include <IE.au3>
#include <Array.au3>
#include <File.au3>


$Form1 = GUICreate("Looper", 355, 229, 435, 293)
$StartStop = GUICtrlCreateButton("Start", 136, 184, 75, 25)
$Rounds = GUICtrlCreateInput("1", 210, 40, 80, 21)
$lRounds = GUICtrlCreateLabel("Rounds", 298, 42, 52, 18)
GUISetState(@SW_SHOW)



While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $StartStop
            If GUICtrlRead($StartStop) = "Start" Then
                GUICtrlSetData($StartStop, "Stop")
                GUICtrlSetState($Rounds, $GUI_DISABLE)
            
                Call("Loop")
            ElseIf  GUICtrlRead($StartStop) = "Stop" Then
                ExitLoop
                MsgBox(0, "Info", "Stopped")
            Else
                MsgBox(0, "Info", "Error")
            EndIf
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd





Func Loop()
    $LoopTimes = GUICtrlRead($Rounds)


    For $i = 1 To $LoopTimes
        MsgBox(0, "Info", "LET US COUNT: " & $i)
        Sleep("2000")
    Next



    GUICtrlSetData($StartStop, "Start")
    GUICtrlSetState($StartStop, $GUI_ENABLE)
    GUICtrlSetState($Rounds, $GUI_ENABLE)
EndFunc


 

Share this post


Link to post
Share on other sites



Comboku,

The Interrupting a running function tutorial in the Wiki shows how you can do this.

M23

 

1 person likes this

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Perfect! Thanks :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • islandspapand
      By islandspapand
      Hi all
      i am currently trying to click on an element in a HTML Table, but just can get it to work.
      i am able to click the top of the table so it changes to sort  but just can't click on the element in the table.
      an i need to click on element to continue in the site.
      i have attached the code so far and pictures of the table  element want to click plus the source of the table.
      i am able to get data in the table with $oTable = _IETableGetCollection($oIE, 2) but not able to click on them.
       
      Help is very much appreciated
       
      #cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.14.2 Author: myName Script Function: Template AutoIt script. #ce ---------------------------------------------------------------------------- ; Script Start - Add your code below here #include <IE.au3> #include "DOM.au3" #include <Array.au3> #include <MsgBoxConstants.au3> Global $oIE = _IECreate("*") _IELoadWait($oIE) Sleep(2000) _PageLogin($oIE) _PageLoadWait() _PageNewReq($oIE) _PageLoadWait() _InputModelInf($oIE) _PageLoadWait() Sleep(1000) $aTableLink = BGe_IEGetDOMObjByXPathWithAttributes($oIE, "//table/tbody/tr/td[.='Name Of user']", 2000) ;~ $aTableLink = BGe_IEGetDOMObjByXPathWithAttributes($oIE, "//table/tbody/tr", 2000) ;~ _ArrayDisplay($aTableLink,"$aTableLink") If IsArray($aTableLink) Then ConsoleWrite("Able to BGe_IEGetDOMObjByXPathWithAttributes($oIE, //table/tbody/tr/td[.='Name Of user'])" & @CRLF) For $i = 0 To UBound($aTableLink)-1 ConsoleWrite(" OuterHTML : " & $aTableLink[$i].outerHTML & @CRLF) ConsoleWrite(" Parentnode : " & $aTableLink[$i].parentnode & @CRLF) ConsoleWrite(" Parentnode.click : " & $aTableLink[$i].parentnode.fireEvent("onclick","click") & @CRLF) $objClick = $aTableLink[$i].parentnode ;~ _IEAction($aTableLink[$i] , "focus") _IEAction($objClick , "focus") ;~ If _IEAction($aTableLink[$i], "click") Then If _IEAction($objClick, "click") Then ConsoleWrite("Able to _IEAction($aForumLink[0], 'click')" & @CRLF) _IELoadWait($oIE) Else ConsoleWrite("UNable to _IEAction($aForumLink[0], 'click')" & @CRLF) Exit 3 EndIf Next Else ConsoleWrite("Unable to BGe_IEGetDOMObjByXPathWithAttributes($oIE, //table/tbody/tr/td[.='Name Of user'])" & @CRLF) Exit 2 EndIf _PageLoadWait() Func _InputModelInf($oTmpIE) ; Add Var for Model & Serial in Func $oModelInput = _IEGetObjById($oTmpIE,"model") _IEAction($oModelInput,"focus") _IEDocInsertText($oModelInput, "*") $oSerialInput = _IEGetObjById($oTmpIE,"serial") _IEAction($oModelInput,"focus") _IEDocInsertText($oSerialInput, "*") $links = $oTmpIE.document.getElementsByClassName("btn btn-primary ng-scope") For $link In $links If $link.innertext = "Søg" Or $link.innertext = "Search" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageNewReq($oTmpIE) $links = $oTmpIE.document.getElementsByClassName("ng-scope k-link") For $link In $links If $link.innertext = "Send ny fejlmelding" Or $link.innertext = "Submit a New Service Request" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageLogin($oTmpIE) $oUserInput = _IEGetObjById($oTmpIE,"loginid") _IEDocInsertText($oUserInput, "*") $oPasswordInput = _IEGetObjById($oTmpIE,"password") _IEDocInsertText($oPasswordInput, "*") $links = $oTmpIE.document.getElementsByClassName("btn btn-primary login ng-scope") For $link In $links If $link.innertext = "Sign in" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageLoadWait() Local $PageLoadWait = False ;~ nav navbar-nav navbar-right ng-hide ;~ nav navbar-nav navbar-right $tags = $oIE.document.GetElementsByTagName("ul") For $tag in $tags $class_value = $tag.GetAttribute("class") If $class_value = "nav navbar-nav navbar-right" Then ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : Webpage loading :) ' & @CRLF) ;### Debug Console $PageLoadWait = True ExitLoop EndIf Next Do sleep(250) For $tag in $tags $class_value = $tag.GetAttribute("class") If $class_value = "nav navbar-nav navbar-right ng-hide" Then ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : Webpage load finished :)'& @CRLF) ;### Debug Console $PageLoadWait = False ExitLoop EndIf Next Until $PageLoadWait = False EndFunc  
      Thanks in advance
       
       


    • 0Ethan0
      By 0Ethan0
      Ahoy Autoit Community!
      After many trials and errors I am unable to solve a problem I am facing and would appreciate any kind of input or better yet a solution 
      The Premise: An embeded slideshow viewer that runs after double-clicking an item in a ListView (each item will generate a different slideshow images).
      The Setup: GUI with a ListView Control and a simple exit button.
      The Issue: Once double clicked the slide plays however the GUI "locks"/non responsive until the slide is over. Same thing if I click on the "Test" button.
      The Culprit: I believe since it's in the images loop it can't accept any other commands until that loop is over.
      The Wish: I want to be able to use the GUI functions (selecting other items, clicking on button etc.) while the slideshow plays.
      The Code (stripped and simplified as much as I could):
      #include <GuiListView.au3> #include <File.au3> #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) HotKeySet("{Esc}", "_Exit") Global $c=0 Global $ssGDI[3], $ssGraphic[2], $ssImage Global Const $bg_color = "000000" Global Const $ssW = 480, $ssH = 320 Global $aFiles = _FileListToArrayRec("d:\testStage\", "*.jpg;*.png;*.bmp;*.gif;*.JPG;*.PNG;*.BMP;*.GIF", $FLTAR_FILES, $FLTAR_NORECUR ,$FLTAR_SORT ,$FLTAR_FULLPATH ) $guiW = 1200 $guiH = 726 $mainWindow = GUICreate("Slideshow Viewer", $guiW, $guiH, -1, -1, $WS_POPUP) $Button1 = GUICtrlCreateButton("Exit", 0, 0, 50, 50) GUICtrlSetOnEvent($Button1, "_Exit") $Button1 = GUICtrlCreateButton("Test", 60, 0, 50, 50) GUICtrlSetOnEvent($Button1, "Test") Global $ListView = GUICtrlCreateListView("Entry Name|Category", 5, 75, 195, 280) _GUICtrlListView_SetColumnWidth ($ListView, 0, 100) _GUICtrlListView_SetColumnWidth ($ListView, 1, 100) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT) GUICtrlCreateListViewItem("Name 1|Category 1", $ListView) GUICtrlCreateListViewItem("Name 2|Category 2", $ListView) screenshotWidgetInit($ssW,$ssH, 690, 100) GUISetState(@SW_SHOW, $mainWindow) GUIRegisterMsg($WM_NOTIFY, "WM_Notify_Events") While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE _Exit() EndSwitch WEnd Func Test() For $k = 1 To UBound($aFiles) - 1 screenshotWidgetTransition($aFiles[$k]) Next EndFunc Func ListView_Click() ConsoleWrite("Left Click") EndFunc Func ListView_DoubleClick() ConsoleWrite("Double Left Click") Test() EndFunc Func WM_Notify_Events($hWndGUI, $MsgID, $wParam, $lParam) #forceref $hWndGUI, $MsgID, $wParam Local $tagNMHDR, $event, $hwndFrom, $code $tagNMHDR = DllStructCreate("int;int;int", $lParam) If @error Then Return $event = DllStructGetData($tagNMHDR, 3) Select Case $wParam = $ListView Select Case $event = $NM_CLICK ListView_Click () Case $event = $NM_DBLCLK ListView_DoubleClick () EndSelect EndSelect Return $GUI_RUNDEFMSG EndFunc Func screenshotWidgetTransition($image, $delay = 0, $speed = 1, $sleep = 2000) Local $a, $d = $c, $iX, $iY $ssImage = _GDIPlus_ImageLoadFromFile($image) $iX = _GDIPlus_ImageGetWidth($ssImage) $iY = _GDIPlus_ImageGetHeight($ssImage) $FDesktop=$ssH/$ssW $Fact =1 If $iX > $ssW And $FDesktop > ($iY/$iX) Then $Fact=$ssW/$iX ElseIf $iY > $ssH Then $Fact=$ssH/$iY EndIf $H1 = Round(($Fact * $iY),0) $W1 = Round(($Fact * $iX),0) _GDIPlus_GraphicsDrawImageRect($ssGraphic[$d], $ssImage,($ssW - $W1)/2, ($ssH - $H1) / 2,$W1,$H1) WinSetTrans($ssGDI[$d], "", 0) WinSetOnTop($ssGDI[$d], "", 1) For $a = 0 To 254 Step $speed WinSetTrans($ssGDI[$d], "", $a) Sleep($delay) Next WinSetTrans($ssGDI[$d], "", 254) WinSetOnTop($ssGDI[Not ($d)], "", 0) WinSetTrans($ssGDI[Not ($d)], "", 0) _GDIPlus_GraphicsClear($ssGraphic[Not ($d)]) $c = 1 - $d _GDIPlus_ImageDispose ($ssImage) ; very important to realease the pics Sleep($sleep) EndFunc ;==>screenshotWidgetTransition Func screenshotWidgetInit($ssW,$ssH,$ssX,$ssY) $ssGDI[2] = GUICreate("", $ssW, $ssH, $ssX, $ssY, $WS_POPUP, $WS_EX_MDICHILD, $mainWindow) $ssGDI[0] = GUICreate("", $ssW, $ssH, 3, 3, $WS_POPUP, $WS_EX_MDICHILD, $ssGDI[2]) $ssGDI[1] = GUICreate("", $ssW, $ssH, 3, 3, $WS_POPUP, $WS_EX_MDICHILD, $ssGDI[2]) ; GUISetBkColor("0x" & $bg_color, $ssGDI[2]) GUISetState(@SW_SHOW, $ssGDI[2]) GUISetState(@SW_SHOW, $ssGDI[0]) GUISetState(@SW_SHOW, $ssGDI[1]) WinSetTrans($ssGDI[0], "", 0) WinSetTrans($ssGDI[1], "", 0) _GDIPlus_Startup() $ssGraphic[0] = _GDIPlus_GraphicsCreateFromHWND($ssGDI[0]) $ssGraphic[1] = _GDIPlus_GraphicsCreateFromHWND($ssGDI[1]) _GDIPlus_GraphicsClear($ssGraphic[0], "0xFF" & $bg_color) _GDIPlus_GraphicsClear($ssGraphic[1], "0xFF" & $bg_color) EndFunc ;==>screenshotWidgetInit Func _Exit() _GDIPlus_ImageDispose($ssImage) _GDIPlus_GraphicsDispose($ssGraphic[0]) _GDIPlus_GraphicsDispose($ssGraphic[1]) GUIDelete($ssGDI[0]) GUIDelete($ssGDI[1]) GUIDelete($ssGDI[2]) _GDIPlus_Shutdown() Exit EndFunc ;==>_Exit I hope someone can shed light on this; perhaps a different approach is needed?
      Thank you in advance!
      P.S.
      The script is patched from different scripts of different users in the forum - thank you again users!
    • Patryk
      By Patryk
      Dear Colleagues,
      I have no idea how to refer to style.display in my loop. There is a button like: 
      <input name="ctl00$bodyPlaceholder$btnFecharProcessamento" class="button" id="bodyPlaceholder_btnFecharProcessamento" style="display: none;" onclick="FecharJanelaProcessamento();return false;" type="submit" value="Fechar"> I want it to be clicked as soon as button's style change from style="display: none;" to  style= ="display: inline-block;" 
      This is what I got, but it's not working...
      Func GetButtons() $oButtons = _IEGetObjByName($oForm,"ctl00$bodyPlaceholder$btnFecharProcessamento",-1) $i = 0 While $i <> 1 For $oBtn In $oButtons If _IEFormElementGetValue($oBtn) = "Fechar" And $oBtn.document.style.display = "display: inline-block;" Then $i = 1 _IEAction($oBtn, "focus") _IEAction($oBtn, "click") ExitLoop EndIf Next WEnd EndFunc  
      I will really appreciate if you could help me with these loop!
    • OtenMoten
      By OtenMoten
      Hello dear community,
       
      definitely I need external help now. I've did all 'ControlClick() - Tutorials' and read a lot of topics about interaction betweend AutoIT and external programs.
      The most of them are about "Clicking a button ...". In my case it's different because I need to click a specific element within the program.
       
      The 'program' what I am talking about is called Mendeley. It's library software for documents administration.
       
      In the attachements in picture '1.jpg' you can see the red marked Help element. 
      In the picture '2.jpg' you see the context menu of the Help element. This is what I'm trying to do with the ControlClick() function.
       
      Following I represent my code which not worked for me:
      #include <MsgBoxConstants.au3> Opt("WinTitleMatchMode", 2) $hWnd = WinGetHandle("Mendeley Desktop", "") MsgBox($MB_SYSTEMMODAL, "handle check", $hWnd) ControlClick($hWnd, "Mendeley Desktop", "Help") The MsgBox tells me the number of the handle of the Mendeley window. It's not 0 so for me it means the window is recognized correctly.
       
      When I'm execute the script the Help element is not clicked.
      Any suggestions for me?
       
      Kind regards
      OtenMoten


    • thoms
      By thoms
      Hello Forum,
      As said in the title, I'm searching a way to disable all tabstops in a GUI. My GUI includes 15 buttons and 3 edit controls.
      My questions:
      - is there a way to disable all tabstops at a time
      - is there a way to list all controls of a GUI and then disable tabstops one by one
      - or should I use the following line after each button creation:
      _WinAPI_SetWindowLong(GUICtrlGetHandle(-1), $GWL_STYLE, BitAND(_WinAPI_GetWindowLong(GUICtrlGetHandle(-1), $GWL_STYLE), BitNOT($WS_TABSTOP))) Thanks in advance for your valuable help!
      Thoms
      Edit: or maybe disable TAB key? I don't remember how to do!