Jump to content

How to use Winlicense SDK.dll in Autoit GUI


Recommended Posts

Hi,

I have written some code for a GUI. When user clicks install button in My GUI then it will run a winlicense protected exe application.

At this moment I want to know that,

How to use Custom WinlicenseSDK.dll functions in my AutoIT GUI?

Link this Custom WinlicenseSDK.dll with my winlicense protected exe application?

Retrieve the hardware id of HDD, CPU, BIOS and made a combined machine ID through CustomWinlicenseSDK.dll?

Based on provided machine ID how to install the license key to the computer through the protected application.

This is my humble request to all Autoit expert that “Please give me an Example Script”. I am a new coder and I like this forum because this place is very very helpful. I have completed my GUI without any person’s direct help, which has been happened because I have got enough friendly post in this forum. Now I am in last stage also it seems too much complex to me. and in my country very few people have knowledge about AutoIT. So please help me regarding this matter. I asked my questions to Winlicense support  team. The answer is written below. But I cannot realize it completely. So please give me an example script. 

Here are my protected EXE and Winlicense SDK.

https://drive.google.com/file/d/0Bx3JhZJEsjjBenRfN3hXTV9EeWc/view?usp=drive_web

 

"" Hi Nurul,

 

As AutoIt is running as interpreted code, we don't have a direct way to call the SDK via function names for AutoIt applications. You can use a different approach to call the SDK using the "GetEnvironmentVariable" bridge as we present to .NET applications. 

In order to enable the SDK via the "GetEnvironmentVariable", you have to enable the option "EnvironmentSDK" in the SecureEngine Config panel (please, read at the end of this email to see how to enable that panel).

Please, refer to the Help File and the Trial-Registration (.NET) example (in the WinlicenseSDK/Examples subfolder) so you can see how the SDK is called via the GetEnvironmentVariable.

If you have any problems or questions, let us know please.

If you don't see the "SecureEngine Config" panel, please, edit your WinLicense.ini file (in the same folder as Winlicense.exe) and add the entry "ShowSecureEngineOptions = yes" under the "[General]" tab. After that, restart Winlicense.exe again (the "SecureEngine Config" link should appear on the left panel)

Please, check the following screenshot with the entry “ShowSecureEngineOptions” added in the Winlicense.ini file."""

 

scr.JPG

Edited by nuhan
Link to post
Share on other sites

Hi,

I have written some code for a GUI. When user clicks install button in My GUI then it will run a winlicense protected exe application.

At this moment I want to know that,

How to use Custom WinlicenseSDK.dll functions in my AutoIT GUI?

Link this Custom WinlicenseSDK.dll with my winlicense protected exe application?

Retrieve the hardware id of HDD, CPU, BIOS and made a combined machine ID through CustomWinlicenseSDK.dll?

Based on provided machine ID how to install the license key to the computer through the protected application.

This is my humble request to all Autoit expert that “Please give me an Example Script”. I am a new coder and I like this forum because this place is very very helpful. I have completed my GUI without any person’s direct help, which has been happened because I have got enough friendly post in this forum. Now I am in last stage also it seems too much complex to me. and in my country very few people have knowledge about AutoIT. So please help me regarding this matter. I asked my questions to Winlicense support  team. The answer is written below. But I cannot realize it completely. So please give me an example script. 

Here are my protected EXE and Winlicense SDK.

https://drive.google.com/file/d/0Bx3JhZJEsjjBenRfN3hXTV9EeWc/view?usp=drive_web

 

"" Hi Nurul,

 

As AutoIt is running as interpreted code, we don't have a direct way to call the SDK via function names for AutoIt applications. You can use a different approach to call the SDK using the "GetEnvironmentVariable" bridge as we present to .NET applications. 

In order to enable the SDK via the "GetEnvironmentVariable", you have to enable the option "EnvironmentSDK" in the SecureEngine Config panel (please, read at the end of this email to see how to enable that panel).

Please, refer to the Help File and the Trial-Registration (.NET) example (in the WinlicenseSDK/Examples subfolder) so you can see how the SDK is called via the GetEnvironmentVariable.

If you have any problems or questions, let us know please.

If you don't see the "SecureEngine Config" panel, please, edit your WinLicense.ini file (in the same folder as Winlicense.exe) and add the entry "ShowSecureEngineOptions = yes" under the "[General]" tab. After that, restart Winlicense.exe again (the "SecureEngine Config" link should appear on the left panel)

Please, check the following screenshot with the entry “ShowSecureEngineOptions” added in the Winlicense.ini file."""

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DevMode
      welcome
      I need help dealing with a C++ DLL
      Specify that I need help with how to use this function
      struct libusb_device; typedef struct libusb_context libusb_context; ssize_t LIBUSB_CALL libusb_get_device_list(libusb_context *ctx,libusb_device ***list); My problem is how to deal with "libusb_device ***list"
      my code 
      $libusb_device = DllStructCreate("PTR") Func libusb_init() $Var = DllCall($libusb0, "ptr", "libusb_init",'ptr',$_libusb_device_handle_Ptr) If @error Then Return False Return $Var[1] EndFunc Func libusb_get_device_list() MsgBox(0,VarGetType($_libusb_device_handle_Ptr),$_libusb_device_handle_Ptr) $Var = DllCall($libusb0, "int", "libusb_get_device_list","ptr",$_libusb_device_handle_Ptr,"ptr*",POINTER(POINTER($libusb_device))) $Error = @error If $Error Then Return False MsgBox(0,VarGetType($Var),$Error&@CRLF&$Var) _ArrayDisplay($Var) Return $Var[1] EndFunc  
      Thank you
      iLibUSB.dll iLibUSB_32.dll libusb.h
    • By bobflumox
      Hi all,
      My programming knowledge is very basic.
      I have an old script that creates shares and assign permissions. It normally registers SetAcl.ocx if necessary and creates an object to assign permissions.
      The command that registers SetAcl was apparently working fine under Windows 7 but is not working under Windows 10.
      RunWait("regsvr32.exe path\to\setacl.ocx /s", "", @SW_HIDE) As I'm logged in as admin, I changed this command to :
      RunAsWait(@UserName, "", "", 0, "regsvr32.exe path\to\setacl.ocx /s", "", @SW_HIDE) It seems to terminate correctly but the script still doesn't work as expected.
      To check that, I've created that small script :
      Local $objSetAcl = ObjCreate("SETACL.SetACLCtrl.1") If IsObj($objSetAcl) Then ConsoleWrite("Object successfully created." & @CRLF) Else ConsoleWrite("Object not created. Registering SetAcl.ocx" & @CRLF) Local $result = RunAsWait(@UserName, "", "", 0, "regsvr32.exe path\to\setacl.ocx /s", "", @SW_HIDE); Use of my admin username to elevate CMD ConsoleWrite("Return code : " & $result & @CRLF) ConsoleWrite("Creating object" & @CRLF) $objSetAcl = ObjCreate("SETACL.SetACLCtrl.1") If IsObj($objSetAcl) Then ConsoleWrite("Object successfully created." & @CRLF) Else ConsoleWrite("Object creation failed." & @CRLF) EndIf EndIf It tries to register SetAcl.ocx, return code 0 seems to be fine but still can't use SetAcl.
      But if I go to CMD as admin, run the regsvr32 command and restart my script, it can create the object without issue.
      I know my poor knowledge makes me miss something. Anyone can help me figure this out ?
    • By Gowrisankar
      Dear members of the forum,
      I'm working on a project in which I have to use Image recognition technique. 
      Due to client restrictions, I couldn't use AutoIt for this project. 
      Is there a way to use this DLL "ImageSearchDLL.dll" (which is used to do image recognition steps in AutoIt) in VB.Net to achieve the same result? 
      I have used this DLL few years before and got good results. If there is a latest version of this DLL and if you can share it, that will be helpful too.
      Any guidance is deeply appreciated.
    • By Colduction
      Hi AutoIt Scripters/Programmers. I have a question about MIME Tools for Notepad++:
      I've recently found a UDF about Base64 in forum, but they can't decode\encode correctly some emojis , other UTFs and etc. so i decided to use mimeTools.dll of Notepad++ or main site
      My problem is how to use this dll in AutoIt Language?

      I will be happy with your comments and answers❤ Thanks.
    • By FrancescoDiMuro
      Good morning Forums 
      In these days, I am working on a project that involved me to use some Windows APIs to obtain some information about Terminal Servers.
      I'm doing this using wtsapi32.dll in a VBA Project, but, the lack of knowledge about few things threated in the articles make this quite difficult to
      implement and understand at the same time.
      The most difficult thing I'm facing is "translating" C/C++ functions or struct in VBA when pointers are used, or pointers of pointers, and so on.
      Since VBA seems to not have a pointer type, to make those functions work I need to implement other functions taken from other DLLs, and this confuses me a lot.
      For example, starting from this code, I splitted all the functions and all the definitions to understand why they are there, and why I need to use them.
      At the end, I've found out that the code I was going to implement starting from the functions provided in the Microsoft Docs won't be ever be able to work without some supplementary functions which are not mentioned anywhere.
      So, I was wondering if someone would please point me out to a good and practical exaplanation about pointers (in general) or specifically for VBA, because I need to use them quite often in these days, and I'd like to understand what I am doing.
      Thanks in advance.

      Best Regards and Stay at home 🏡
       
×
×
  • Create New...