SkysLastChance

[SOLVED] Is it possible to skip a blank cell with my code?

4 posts in this topic

#1 ·  Posted (edited)

I was wondering if it is possible to make this code skip to the next row if it reads a blank line?

I tried this.

If $aArray = "" Then
       $r += 1
    EndIf
#include <Excel.au3>


Local $r = 1
    Local $aArray = _Excel_RangeRead($oWorkbook)
    ;~ If $iBox is greater than no. of rows in $aArray then $iBox equals the number of rows in $aArray
    If $iBox > (UBound($aArray) - 1) Then $iBox = UBound($aArray) - 1
    For $i = 1 To UBound($aArray) - 1   ;$i =0 Start from row A
    If $aArray = "" Then
        $r += 1
    EndIf
     
        $sR0  = $aArray[$i][0]    ;status
        $sR1  = $aArray[$i][1]    ;first name
        $sR2  = $aArray[$i][2]    ;Last name
        $sR3  = $aArray[$i][3]    ;Last 4 SSN
        $sR4  = $aArray[$i][4]    ;DOB
        $sR5  = $aArray[$i][5]    ;Email Address
        $sR6  = $aArray[$i][6]    ;Mailling Address
        $sR7  = $aArray[$i][7]    ;City
        $sR8  = $aArray[$i][8]    ;state
        $sR9  = $aArray[$i][9]    ;Zip Code
        $sR10 = $aArray[$i][10]   ;Gender
        $sR11 = $aArray[$i][11]   ;Phone

   WinSetState ("ADM.MCK - Registration Management Desktop","",@SW_MAXIMIZE)


      WinWaitActive("[CLASS:Notepad]", "", 10)

       ControlSend("[CLASS:Notepad]", "", "", ("{F8}"))
            Sleep (500)
        ControlSend("[CLASS:Notepad]", "", "", ("{F8}"))
            Sleep (500)
        ControlSend("[CLASS:Notepad]", "", "", ("N"))
        ControlSend("[CLASS:Notepad]", "", "", ("{TAB}"))
            Sleep (3000)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR1 & @CR)
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "", ("{TAB}"))
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR2 & @CR)
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "", ("{TAB}"))
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR6& @CR)
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "", ("{TAB}"))
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR7 & @CR)
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR8 & @CR)
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR9 & @CR)
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR11& @CR)
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR5 & @CR) ;Email
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "Edit1", $sR5 & @CR)  ;Email
            Sleep (200)
        ControlSend("[CLASS:Notepad]", "", "", (FormatDate($sR4) & @CR))


      $r += 1

 

 

Edited by SkysLastChance

Life's simple. You make choices and you don't look back.

Share this post


Link to post
Share on other sites



You would need to use the instance for example If $aArray[$i] = '' Then Continueloop

1 person likes this

Share this post


Link to post
Share on other sites
Func Auto ()
    Local $r = 1
    Local $aArray = _Excel_RangeRead($oWorkbook)
    ;~ If $iBox is greater than no. of rows in $aArray then $iBox equals the number of rows in $aArray
    If $iBox > (UBound($aArray) - 1) Then $iBox = UBound($aArray) - 1
    For $i = 1 To UBound($aArray) - 1   ;$i =0 Start from row A
    If $aArray[$i][1] = "" Then Continueloop

        $sR0  = $aArray[$i][0]    ;status
        $sR1  = $aArray[$i][1]    ;first name
        $sR2  = $aArray[$i][2]    ;Last name
        $sR3  = $aArray[$i][3]    ;Last 4 SSN
        $sR4  = $aArray[$i][4]    ;DOB
        $sR5  = $aArray[$i][5]    ;Email Address
        $sR6  = $aArray[$i][6]    ;Mailling Address
        $sR7  = $aArray[$i][7]    ;City
        $sR8  = $aArray[$i][8]    ;state
        $sR9  = $aArray[$i][9]    ;Zip Code
        $sR10 = $aArray[$i][10]   ;Gender
        $sR11 = $aArray[$i][11]   ;Phone

This worked for me thank you!


Life's simple. You make choices and you don't look back.

Share this post


Link to post
Share on other sites

Sorry should have realized it was a 2d array, Glad you got it working.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • amphoric
      By amphoric
      Hi,
      I am struggling converting my 1D array to a 2D array and then showing that in my List View. Below is my current code, where I would like to take the array from the input box, and have that displayed as a list within the list view this is a list of computer names, and then update the 2nd column of each line once I have ran a ping and a registry change on each computer name, with either 'Completed' and 'Failed'
      I have checked out the AutoIt Arrays page here: https://www.autoitscript.com/wiki/Arrays , but unfortunately I cannot get my head around it. Any help would be greatly appreciated.
      I hope this makes sense.
      Thanks
       
      #include <Date.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <MsgBoxConstants.au3> #include <GUIListBox.au3> #include <GuiListView.au3> #Region ### $Form1 = GUICreate("Title", 515, 533, -1, -1) GUISetBkColor(0xFFFFFF) $Pic2 = GUICtrlCreatePic("Images\pic.jpg", 16, 16, 212, 28) $Label1 = GUICtrlCreateLabel("Label", 240, 16, 271, 33, $SS_CENTER) GUICtrlSetFont(-1, 17, 800, 0, "") $Combo1 = GUICtrlCreateCombo("", 256, 406, 241, 25, BitOR($GUI_SS_DEFAULT_COMBO,$CBS_SIMPLE)) $Label2 = GUICtrlCreateLabel("Please select the location", 45, 401, 210, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $ChangeButton = GUICtrlCreateButton("Change", 286, 487, 75, 25) $RePromptButton = GUICtrlCreateButton("Re-prompt User", 366, 487, 139, 25) $Checkbox1 = GUICtrlCreateCheckbox("I have ensured that my selection is correct.", 10, 487, 273, 25) GUICtrlSetFont(-1, 10, 400, 0, "") $ManLocation = GUICtrlCreateLabel("Please enter the location:", 59, 448, 189, 20, $SS_RIGHT) GUICtrlSetFont(-1, 10, 800, 0, "") GUICtrlSetState(-1, $GUI_HIDE) $ManLocInput = GUICtrlCreateInput("", 256, 445, 241, 24) GUICtrlSetState(-1, $GUI_HIDE) $Label5 = GUICtrlCreateLabel("for this device:", 138, 418, 109, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Label3 = GUICtrlCreateLabel("Asset Number:", 98, 72, 107, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Input1 = GUICtrlCreateInput("", 215, 69, 241, 24) $AddMulti = GUICtrlCreateLabel("Add Multiple Assets", 356, 55, 98, 13, $SS_RIGHT) GUICtrlSetFont(-1, 8, 400, 6, "") GUICtrlSetColor(-1, 0x808080) GUICtrlSetCursor (-1, 0) $List1 = GUICtrlCreateListView("", 16, 104, 481, 278) $Add = GUICtrlCreateButton("Add", 461, 68, 35, 25) GUISetState(@SW_SHOW) #EndRegion ### ;### StartForm ### $FormaMultiple = GUICreate("Title", 277, 418, -1, -1) GUISetBkColor(0xFFFFFF) $Label1 = GUICtrlCreateLabel("Please add 1 asset number per line.", 8, 11, 253, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $OK = GUICtrlCreateButton("OK", 56, 375, 75, 25) $Edit1 = GUICtrlCreateEdit("", 20, 40, 233, 329) $Cancel = GUICtrlCreateButton("Cancel", 136, 375, 75, 25) GUISetState(@SW_HIDE) ;### EndForm ### ;### Add List View Columns START ### ;### Add List View Columns END ### ;### Read Locations START ### ;Read the LOCAL ini file SECTIONS Global $aSections = IniReadSectionNames("Locations.ini") ;If the above succeeded, convert the array to a string with each item separated by a | (pipe) and set the default selected item to $aSections[1] If(Not @Error) Then GUICtrlSetData($Combo1, _ArraytoString($aSections, "|", 1), $aSections[1]) ;### Read Locations END ### ;### Require Admin START ### ;#RequireAdmin ;### Require Admin END ### While 1 $nMsg = GUIGetMsg() ;### Data Validation START ### ;Set Checkbox = ENABLE/DISABLE if not GUICtrlRead($Combo1) = "" AND GUICtrlRead($Combo1) = "Not In List" then if not GUICtrlRead($ManLocInput) = "" Then If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) Else If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) EndIf Else if GUICtrlRead($Combo1) = "" Then If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) Else If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) EndIf EndIf ;Set Button = ENABLE/DISABLE If GUICtrlRead($Checkbox1) = 1 Then If Not ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_ENABLE) Else If ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_DISABLE) EndIf ;### Data Validation END ### Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $Add Case $AddMulti GUISetState(@SW_SHOW, $FormaMultiple) Case $Cancel GUISetState(@SW_HIDE, $FormaMultiple) Case $OK $sText = GUICtrlRead($Edit1) $aText = StringSplit($sText, @CRLF, 1) $bText = _ArrayToString($aText, ";", 1, -1) $cText = StringStripWS($bText, $STR_STRIPALL ) $dText = StringReplace($cText,";;",";") GUICtrlSetData($Input1, $dText) GUICtrlSetData($Edit1, "") GUISetState(@SW_HIDE, $FormaMultiple) For $i = 1 To $aText[0] Next Case $Combo1 ; If the combo is actioned Switch GUICtrlRead($Combo1) Case "Not In List" ; Show the manual input controls GUICtrlSetState($ManLocation, $GUI_SHOW) GUICtrlSetState($ManLocInput, $GUI_SHOW) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") Case Else ; Hide them GUICtrlSetState($ManLocation, $GUI_HIDE) GUICtrlSetState($ManLocInput, $GUI_HIDE) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") EndSwitch Case $ChangeButton ChangeReg() Case $RePromptButton RemoveReg() EndSwitch WEnd Func ChangeReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & " Changed to: " & GUICtrlRead($Combo1)) Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg Func RemoveReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & "CLEARED") Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg1  
    • MrCheese
      By MrCheese
      Hey Guys,
       
      So, the functions work, where primarygui() accurately determines the evaluation of the status of the checkboxes - the msgbox picks this up.
       
      However, later on, when we re-enter a 'for $i = 0 to ubound($checkbox)' loop, then in the 'batchinitial' function it doesn't picked up that the status&$i = 1, so it jumps out, then within the While 1 loop, it exits the loop in the first row, again because the status& $i= 0
      The "assign" line within the primarygui funtion, is this only a local assignment? if so, how can I make it cross function?
       
      Thank in adv for your help
       
       
      Func excelsheetlist() $i = 0 Global $aWorkSheets = _Excel_SheetList($oWorkbook1) If @error Then Exit MsgBox($MB_SYSTEMMODAL, "Excel UDF: _Excel_SheetList Example 1", "Error listing Worksheets." & @CRLF & "@error = " & @error & ", @extended = " & @extended) ;_ArrayDisplay($aWorkSheets, "Excel UDF: _Excel_SheetList Example 1") ;_ArrayDisplay($aWorkSheets, "Array") Global $iRows = UBound($aWorkSheets, $UBOUND_ROWS) ; Total number of rows. In this example it will be 10. Global $iCols = UBound($aWorkSheets, $UBOUND_COLUMNS) ; Total number of columns. In this example it will be 20. Global $iDimension = UBound($aWorkSheets, $UBOUND_DIMENSIONS) ; The dimension of the array e.g. 1/2/3 dimensional. MsgBox($MB_SYSTEMMODAL, "", "The array is a " & $iDimension & " dimensional array with " & _ $iRows & " row(s) & " & $iCols & " column(s).") Dim $checkbox[$iRows] EndFunc ;==>excelsheetlist Func primarygui() ; Create a GUI with various controls. Local $hGUI = GUICreate("Script Controller", 300, ($iRows * 24)) ; Create a checkbox control. ;Local $idCheckbox = GUICtrlCreateCheckbox("Standard Checkbox", 10, 10, 185, 25) Local $Button2 = GUICtrlCreateButton("Close", 210, 200, 85, 25) Local $Button3 = GUICtrlCreateButton("Run", 210, 170, 85, 25) Local $Button1 = GUICtrlCreateButton("Discharge", 210, 140, 85, 25) For $i = 0 To UBound($checkbox) - 1 $checkbox[$i] = GUICtrlCreateCheckbox($aWorkSheets[$i][0], 8, 0 + ($i * 24)) ;, 81, 17) Next ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) ; Loop until the user exits. While 1 $nMsg = GUIGetMsg() Select Case $nMsg = $GUI_EVENT_CLOSE Exit Case $nMsg = $Button2 ;Close Exit Case $nMsg = $Button1 MsgBox(0, "Discharge Button not configured", "Now Exiting") Exit Case $nMsg = $Button3 ;Run $fSelection = False For $i = 0 To UBound($checkbox) - 1 If BitAND(GUICtrlRead($checkbox[$i]), $GUI_CHECKED) Then $fSelection = True ExitLoop EndIf Next If $fSelection Then For $i = 0 To UBound($checkbox) - 1 Assign("status" & $i, GUICtrlRead($checkbox[$i])) Next $batchcount = 0 For $i = 0 To UBound($checkbox) - 1 If Eval("status" & $i) = 1 Then $batchcount = $batchcount + 1 ;Call ("o" & $i & "copy") ; if you want to call the functions directly, remove ; before the call and comment or delete the following DirCopy statement MsgBox(0, "Checking", "Checking that: " & $checkbox[$i] & " no, with title: " & $aWorkSheets[$i][0] & " was selected, Batch count: " & $batchcount) ; if you need only the DirCopy EndIf Next ExitLoop Else MsgBox(48, 'No Items Selected', 'You have not selected any Patients to Load, Please select from the list') EndIf EndSelect WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>primarygui Func _IsChecked($idControlID) Return BitAND(GUICtrlRead($idControlID), $GUI_CHECKED) = $GUI_CHECKED EndFunc ;==>_IsChecked Func batchinitial() If Eval("status" & $i) = 1 Then debugbox() $oWorkbook1.Sheets(1).Activate $bigloop = $bigloop + 1 $sheet = $aWorkSheets[$i][0] $oWorkbook1.Sheets($sheet).Activate debugbox() EndIf EndFunc ;==>batchinitial OpenExcel() excelsheetlist() primarygui() For $i = 0 To UBound($checkbox) - 1 batchinitial() While 1 If Eval("status" & $i) = 0 Then ExitLoop ;all the rest of my script loops etc WEnd Next  
    • FMS
      By FMS
      Hello,
      I'm building whit mine limited coding know-how a AI in Autoit....
      Just because..... why not
      It's not doing what i tought it would do.
      I hope somebody could help me whit this script?
      so far :
      -building an learning grid --> AI needs to guess the label in the grin whit only the X and Y value.
      -Building an array filled whit random values as weights.
      -quess the label
      -learn - if quess not the same as the label go change the weights

      At this point (the changing of the weights) I've some strange result and hope somebody could point me in the right direction
      I think that the problem is in the formula for changing the weights.

      PS. I'm also open for good coding practice   I'm learning coding as i go
      #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #include <MsgBoxConstants.au3> #include <Array.au3> build_grid_list() build_neurons() _ArrayDisplay($gridlist,"$gridlist 0","",32) _ArrayDisplay($neurons,"$neurons 0","",32) For $i = 1 To UBound($gridlist,1) - 1 If $gridlist[$i][3] = 1 Then go_learn($neurons[1][0],$gridlist[$i][0]) EndIf Next _ArrayDisplay($gridlist,"$gridlist 1","",32) _ArrayDisplay($neurons,"q$neurons 1","",32) Func go_learn($neuron_ID,$gridlist_ID) Local $test = guess($gridlist_ID , $neuron_ID ) For $i = 1 To 5000 If $test <> $gridlist[$gridlist_ID][4] Then change_wieght($neuron_ID , $gridlist_ID ) $test = guess($gridlist_ID , $neuron_ID ) Else ExitLoop EndIf Next EndFunc Func guess($gridlist_ID , $neuron_ID = 1 ,$raw = 0);, $loop = 0 ) Local $temp = 0 ;~ For $i = 1 To ubound($neurons,1) -1 ; input1 * W1 + input2 * W2 + Bias(1) * W3 $temp = $gridlist[$gridlist_ID][1] * $neurons[$neuron_ID][1] + $gridlist[$gridlist_ID][2] * $neurons[$neuron_ID][2] + 1 * $neurons[$neuron_ID][3] ;activate (sign) If $temp >= 0 Then $neurons[$neuron_ID][6] = 1 Else $neurons[$neuron_ID][6] = -1 EndIf $gridlist[$gridlist_ID][5] = $neurons[$neuron_ID][6] $gridlist[$gridlist_ID][6] = $gridlist[$gridlist_ID][6] + 1 $neurons[$neuron_ID][9] = $neurons[$neuron_ID][9] + 1 If $raw = 0 Then Return $neurons[$neuron_ID][6] Else Return $temp EndIf EndFunc Func build_neurons($needed_neurons = 10 ) Global $neurons[$needed_neurons + 1][10] $neurons[0][0] = "id" $neurons[0][1] = "wieght1" $neurons[0][2] = "wieght2" $neurons[0][3] = "wieght3" $neurons[0][4] = "input1" $neurons[0][5] = "input2" $neurons[0][6] = "output" $neurons[0][7] = "tweak_counter" $neurons[0][8] = "not_tweak_counter" $neurons[0][9] = "quess_counter" Local $temp = 1 For $i = 1 To $needed_neurons; -1 $neurons[$i][0] = $i ;id Do ;zero_check output wieght1 $temp = Random(-1 , 1) Until $temp <> 0 $neurons[$i][1] = $temp ;wieght1 Do ;zero_check output wieght2 $temp = Random(-1 , 1) Until $temp <> 0 $neurons[$i][2] = $temp ;wieght2 Do ;zero_check output wieght3 $temp = Random(-1 , 1) Until $temp <> 0 $neurons[$i][3] = $temp ;wieght3 $neurons[$i][4] = 0 ;input1 $neurons[$i][5] = 0 ;input2 Do ;zero_check output $temp = Random(-1 , 1 , 1) Until $temp <> 0 $neurons[$i][6] = $temp ;output +1 / -1 ;~ $neurons[$i][6] = 0 ;output $neurons[$i][7] = 0 ;tweak_counter $neurons[$i][8] = 0 ;not_tweak_counter $neurons[$i][9] = 0 ;quess_counter Next EndFunc Func build_grid_list($grid_x = 10 ,$grid_y = 10 ) Global $gridlist[($grid_x * $grid_y) + 1 ][7] Local $counter = 1 $gridlist[0][0] = "ID" $gridlist[0][1] = "X" $gridlist[0][2] = "Y" $gridlist[0][3] = "Active" $gridlist[0][4] = "Label" $gridlist[0][5] = "quessed" $gridlist[0][6] = "quessed_counter" For $x = 0 to $grid_x - 1 For $y = 0 to $grid_y - 1 $gridlist[$counter][0] = $counter $gridlist[$counter][1] = $x $gridlist[$counter][2] = $y If Random(-1 , 1) >= 0 Then $gridlist[$counter][3] = 0 Else $gridlist[$counter][3] = 1 EndIf If $x > $y Then $gridlist[$counter][4] = 1 Else $gridlist[$counter][4] = -1 EndIf $gridlist[$counter][5] = -99 $gridlist[$counter][6] = 0 $counter = $counter + 1 Next Next EndFunc Func change_wieght($neuron_id , $grid_id );, $W1 , $W2 ) ;W1 = W1 + ^W1 (some change in W1) ;^W = err(known) * input ($neurons[$id][3] = "output") * learningrate ;$neurons[$id][1] = $neurons[$id][1] + "wieght1" Local $iReturn = False ; Desired | Quess | Error ; -1 -1 0 ; -1 +1 -2 ; +1 -1 +2 ; +1 +1 0 Local $error = $gridlist[$grid_id][4] - $neurons[$neuron_id][6] If $error <> 0 Then Local $learningrate = 0.1 Local $str_len1 = StringLen($neurons[$neuron_id][1]) Local $str_len2 = StringLen($neurons[$neuron_id][2]) Local $str_len3 = StringLen($neurons[$neuron_id][3]) Local $dif_weights1 = $error * $neurons[$neuron_id][1] * $learningrate Local $dif_weights2 = $error * $neurons[$neuron_id][2] * $learningrate Local $dif_weights3 = $error * $neurons[$neuron_id][3] * $learningrate Local $verschil1 = StringLeft($dif_weights1,$str_len1) Local $verschil2 = StringLeft($dif_weights2,$str_len2) Local $verschil3 = StringLeft($dif_weights3,$str_len3) Local $new_wieght1 = $neurons[$neuron_id][1] + $verschil1 Local $new_wieght2 = $neurons[$neuron_id][2] + $verschil2 Local $new_wieght3 = $neurons[$neuron_id][3] + $verschil3 $neurons[$neuron_id][1] = StringLeft($new_wieght1,$str_len1) $neurons[$neuron_id][2] = StringLeft($new_wieght2,$str_len2) $neurons[$neuron_id][3] = StringLeft($new_wieght3,$str_len3) $neurons[$neuron_id][7] = $neurons[$neuron_id][7] + 1 ;"counter" $iReturn = False Else $neurons[$neuron_id][8] = $neurons[$neuron_id][8] + 1 ;"not counter" $iReturn = True EndIf Return $iReturn EndFunc thanks in advanced.
       
    • anusha
      By anusha
      Hi I have jus started using auto-it . Please correct me if I'm wrong.
      I need to read data from an input in text box and search in excel file and return value in next column of matched cell on GUI.
      I have written below code but i cannot use variable which has data stored. it works only when search string is hard coded.
      Please help out.
       
      Example()
      Func Example()
      Local $GuiMain = GUICreate("EXCEL TEST", 399, 180) ;creates main GUI
      ;~ Local $idOK = GUISetOnEvent($GUI_EVENT_CLOSE, "Close")
      Local $iWidthCell = 70
      Local $idLabel = GUICtrlCreateLabel("PART NUMBER", 10, 30, $iWidthCell,50)
      Local $RUN_1 = GUICtrlCreateButton("OK", 70, 70, 85, 25)
      Local $Input_1 = GUICtrlCreateInput("PART NUMBER", 100, 20, 120, 20)
      Local $sMenutext = GUICtrlRead($Input_1, 1)
      GUISetState(@SW_SHOW, $GuiMain)

          While 1
          $MSG = GUIGetMsg()
          Select
              Case $MSG = $GUI_EVENT_CLOSE
                  Exit
              Case $MSG = $RUN_1
                  Local $oAppl = _Excel_Open()

      Local $sFilePath1 = "D:\Anu_WorkFolder\Components.xlsx"
      Local $oWorkbook = _Excel_BookOpen($oAppl, $sFilePath1, Default, Default, True)
      Local $aResult = _Excel_RangeFind($oWorkbook, $sMenutext , Default, Default, $xlWhole)
    • Nareshm
      By Nareshm
      How to Activate Opened Excel Windows Using Class not Tittle, Because Some time opened defferent excel that have different name.
      I Tried with
      Winactivate ("[CLASS:XLMAIN]") but not working