Jump to content
31290

[Solved] AD update from csv file

Recommended Posts

31290

 

Hi guys, 

I'd like to write a piece of tool that would allow me to update a certain field in our Active Directory from a comma separated csv file composed like this:

2017-02-24_15-59-49.png

This file, automatically generated, can hold more than 10k lines.
Thus, I need column A to be in one variable, column B in a second one and column C in a third one.

I'm really missing this part as updating the AD is fairly easy once the 3 variable are populated. 

I see things like this:

Quote

Read line 1
Do AD update
Read line 2
Do AD update
...
End Of File

Here's my attempts at the moment:

#include <File.au3>
#include <Array.au3>

Global $csv_file = @DesktopDir & "\Book1.csv"
Global $aRecords

If Not _FileReadToArray($csv_file,$aRecords) Then
   MsgBox(4096,"Error", " Error reading log to Array error:" & @error)
   Exit
EndIf
For $x = 1 to $aRecords[0]
    Msgbox(0,'Record:' & $x, $aRecords[$x]) ; Shows the line that was read from file
    $csv_line_values = StringSplit($aRecords[$x], ",",1) ; Splits the line into 2 or more variables and puts them in an array
    ; _ArrayDisplay($csv_line_values) ; Shows what's in the array you just created.
    ; $csv_line_values[0] holds the number of elements in array
    ; $csv_line_values[1] holds the value
    ; $csv_line_values[2] holds the value
    ; etc
    Msgbox(0, 0, $csv_line_values[1])
Next

Any help on this please? 

Thanks in advance

-31290-

Edited by 31290
solved

~~~ Doom Shall Never Die, Only The Players ~~~

Share this post


Link to post
Share on other sites
rootx
#include <File.au3>
#include <Array.au3>

Global $csv_file = @DesktopDir & "\Book1.csv"
Global $aRecords

If Not _FileReadToArray($csv_file,$aRecords) Then
  ; MsgBox(4096,"Error", " Error reading log to Array error:" & @error)
   Exit
EndIf


For $x = 1 to UBound($aRecords) -1
   ConsoleWrite("ROW "&$x &" "&$aRecords[$x]&@CRLF) ; Shows the line that was read from file
    $csv_line_values = StringSplit($aRecords[$x], ",",1) ; Splits the line into 2 or more variables and puts them in an array
   For $z = 1 to UBound($csv_line_values) -1
        If $z = 1 Then
            ConsoleWrite(" A " &$csv_line_values[$z]&@CRLF)
        ElseIf $z = 2 Then
            ConsoleWrite(" B " &$csv_line_values[$z]&@CRLF)
        ElseIf $z = 3 Then
            ConsoleWrite(" C " &$csv_line_values[$z]&@CRLF)
        EndIf
    Next
   ; _ArrayDisplay($csv_line_values) ; Shows what's in the array you just created.
    ; $csv_line_values[0] holds the number of elements in array
    ; $csv_line_values[1] holds the value
    ; $csv_line_values[2] holds the value
    ; etc
   ; Msgbox(0, 0, $csv_line_values[1])
Next

 

  • Like 1

Share this post


Link to post
Share on other sites
31290

Perfect, 

Thanks :)


~~~ Doom Shall Never Die, Only The Players ~~~

Share this post


Link to post
Share on other sites
Subz

Would like to add you can also use Excel UDF to create your array

#include <Array.au3> ;~ Only required for _ArrayDisplay()
#include <Excel.au3>

;~ Excel File (.xlxx, .csv) file path
$sExcelFile = @DesktopDir & "\Book1.csv"
;~ Open Excel Object
$oExcel = _Excel_Open (False)
;~ Open the Workbook
$oWorkbook = _Excel_BookOpen($oExcel, $sExcelFile, True, False)
;~ Read the Workbook to an array
$aArray = _Excel_RangeRead($oWorkbook)

;~ Display the Array
_ArrayDisplay($aArray)

;~ Close the WorkBook
_Excel_BookClose($oWorkbook)
;~ Close the Excel Object
_Excel_Close($oExcel)

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • HardXOR
      By HardXOR
      Hello AutoIt community
      I run into speed problem in my script wich i cant solve myself, problem is with decoding texture loop - for better explanation, you need extract from file pallete (16x 16 RGB color) and picture data (224 * 128 byte), then use correct color for your picture data.... nothing extra hard and also texture is quite small 224*256
      it is for my car model viewer/later maybe editor GranTurismo 2 from Playstation 1, so its old dataformat and i cant understand why AutoIt take so long to decode texture when good old Playstation almost 2,5 decades old can do that nearly immediately (when you list through cars in shop or garage)
      My first atempt was create all trought dllstructure, because its easier approach, but it was soooo slow (40-50s for create textures) then i upgrade my routine via arrays, first 3D arrays later only 1D, next i put decoding colors outside loop but it is still not enough, my last version took cca 15s wich is still unacceptable for car model viewer when you click on one carmodel from listview (1100 cars for whole game) and you must wait 15-16s for model to load....  oh and i forgot mention some cars have more then 1 color (much more... 8-9-10 etc) soloading take 8-9-10 times more time
      in attachment i post texture file from GranTurismo 2 for one car (contain only 1 color) and also my dll struct version and array version code
      dll struct version - ± 40 sec (33 without saving)
      #include <FileConstants.au3> Global $IMDT[256][256][4] LoadTexture("ufs9r.cdp") Func LoadTexture($file) $fileHandle = FileOpen($file, $FO_BINARY) $header = FileRead($fileHandle, 0x20) ConsoleWrite("header> " & $header & @CRLF) $PAL = FileRead($fileHandle, 0x200) ConsoleWrite("PAL> " & $PAL & @CRLF) FileSetPos($fileHandle, 0x43A0, $FILE_BEGIN) $IMD = FileRead($fileHandle, 0x7000) ConsoleWrite("IMD> " & $IMD & @CRLF) $st = DllStructCreate("BYTE[512]") DllStructSetData($st, 1, $PAL) $struct_PAL = DllStructCreate("WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16];WORD[16]", DllStructGetPtr($st)) $struct_IMD = DllStructCreate("BYTE[" & 0x7000 & "]") DllStructSetData($struct_IMD, 1, $IMD) $start = TimerInit() For $i = 0 To 15 For $j = 0 To 223 $cn = 0 For $k = 0 To 127 $bt = DllStructGetData($struct_IMD, 1, $j * 128 + $k + 1) $blue = BitShift(DllStructGetData($struct_PAL, $i + 1, BitAND($bt, 0x0F) + 1), 7) $IMDT[$j][$cn][0] = $blue $green = BitShift(DllStructGetData($struct_PAL, $i + 1, BitAND($bt, 0x0F) + 1), 2) $IMDT[$j][$cn][1] = $green $red = BitShift(DllStructGetData($struct_PAL, $i + 1, BitAND($bt, 0x0F) + 1), - 3) $IMDT[$j][$cn][2] = $red If DllStructGetData($struct_PAL, $i + 1, BitAND($bt, 0x0F) + 1) = 0 Then $IMDT[$j][$cn][3] = 0x00 Else $IMDT[$j][$cn][3] = 0xFF EndIf $cn += 1 $blue = BitShift(DllStructGetData($struct_PAL, $i + 1, BitShift($bt, 4) + 1), 7) $IMDT[$j][$cn][0] = $blue $green = BitShift(DllStructGetData($struct_PAL, $i + 1, BitShift($bt, 4) + 1), 2) $IMDT[$j][$cn][1] = $green $red = BitAND(BitShift(DllStructGetData($struct_PAL, $i + 1, BitShift($bt, 4) + 1), - 3), 0xFF) $IMDT[$j][$cn][2] = $red If DllStructGetData($struct_PAL, $i + 1, BitShift($bt, 4) + 1) = 0 Then $IMDT[$j][$cn][3] = 0x00 Else $IMDT[$j][$cn][3] = 0xFF EndIf $cn += 1 Next Next saveTGA($i) Next ConsoleWrite("t " & TimerDiff($start) & @CRLF) ; +- 40 seconds FileClose($fileHandle) EndFunc Func saveTGA($name) Local $tga[18] = [0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x20, 0x20] Local $data for $i = 0 To 17 $data &= Hex($tga[$i], 2) Next For $i = 0 To 255 For $j = 0 To 255 For $k = 0 To 3 $data &= hex($IMDT[$i][$j][$k], 2) Next Next Next $binary = FileOpen("test\" & $name & ".tga", BitOR($FO_BINARY, $FO_OVERWRITE, $FO_CREATEPATH)) FileWrite($binary, "0x" & $data) FileClose($binary) EndFunc  
      array version - ± 15 sec (under 10s without saving)
      #include <FileConstants.au3> LoadTexture2("ufs9r.cdp") Func LoadTexture2($file) $fileHandle = FileOpen($file, $FO_BINARY) $a = TimerInit() Global $header[0x20] For $i = 0 To UBound($header) - 1 $header[$i] = Int(String(FileRead($fileHandle, 1))) ; read 0x20 bytes Next ConsoleWrite("header " & TimerDiff($a) & @CRLF) $a = TimerInit() Global $PAL[0x100] For $i = 0 To UBound($PAL) - 1 $PAL[$i] = Number(FileRead($fileHandle, 2)) ; read 0x200 (16*16) words Next Global $PALcolor[16 * 16 * 4] For $i = 0 To UBound($PAL) - 1 $PALcolor[$i * 4 + 0] = BitShift($PAL[$i], 7) $PALcolor[$i * 4 + 1] = BitShift($PAL[$i], 2) $PALcolor[$i * 4 + 2] = BitShift($PAL[$i], -3) If $PAL[$i] = 0 Then $PALcolor[$i * 4 + 3] = 0x00 Else $PALcolor[$i * 4 + 3] = 0xFF EndIf Next ConsoleWrite("PAL " & TimerDiff($a) & @CRLF) $a = TimerInit() FileSetPos($fileHandle, 0x43A0, $FILE_BEGIN) Global $IMD[0x7000] For $i = 0 To UBound($IMD) - 1 $IMD[$i] = Int(String(FileRead($fileHandle, 1))) ; read 0x7000 bytes Next ConsoleWrite("IMD " & TimerDiff($a) & @CRLF) Global $IMDT[256*256*4] $a = TimerInit() For $i = 0 To 15 For $j = 0 To 223 $cn = 0 For $k = 0 To 127 $byte = $IMD[$j * 128 + $k] ; byte for decode $index = $j * 1024 + $cn * 4 $index2 = $i * 0x40 + BitAND($byte, 0x0F) * 4 $IMDT[$index + 0] = $PALcolor[$index2 + 0] ; blue $IMDT[$index + 1] = $PALcolor[$index2 + 1] ; green $IMDT[$index + 2] = $PALcolor[$index2 + 2] ; red $IMDT[$index + 3] = $PALcolor[$index2 + 3] ; alpha $cn += 1 $index = $j * 1024 + $cn * 4 $index2 = $i * 0x40 + BitShift($byte, 4) * 4 $IMDT[$index + 0] = $PALcolor[$index2 + 0] ; blue $IMDT[$index + 1] = $PALcolor[$index2 + 1] ; green $IMDT[$index + 2] = $PALcolor[$index2 + 2] ; red $IMDT[$index + 3] = $PALcolor[$index2 + 3] ; alpha $cn += 1 Next Next ;~ $b = TimerInit() saveTGA2($i) ;~ ConsoleWrite("save TGA " & TimerDiff($b) & @CRLF) Next ConsoleWrite("full time " & TimerDiff($a) & @CRLF) ; 16 seconds FileClose($fileHandle) EndFunc Func saveTGA2($name) Local $tga[18] = [0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x20, 0x20] Local $data For $i = 0 To 17 $data &= Hex($tga[$i], 2) Next For $i = 0 To UBound($IMDT) - 1 $data &= Hex($IMDT[$i], 2) Next $binary = FileOpen("test\" & $name & ".tga", BitOR($FO_BINARY, $FO_OVERWRITE, $FO_CREATEPATH)) FileWrite($binary, "0x" & $data) FileClose($binary) EndFunc if anyone can optimize my code I would be very grateful, or pointing me to better solution, thx
      ufs9r.cdp
    • FMS
      By FMS
      Hello,
      Does somebody knows a quick way to split eash word to an array in a text?
      I've a text and want to have each word in that text in an array.

      I tried to get in some way multiple seperators inside stringsplit but couldn't get it to work.
      I hope to get an array like :
      $aArray[0] = "PARIJS"
      $aArray[1] = "AFN"
      $aArray[2] = "Air"
      ....
      sample text: PARIJS (AFN) - Air France-KLM heeft de financieel directeur van het Franse nuts- en vervoersbedrijf Veolia, Philipe Capron, in het vizier om de nieuwe topman van de luchtvaartcombinatie te worden. Volgens de krant La Tribune wordt Capron als favoriet beschouwd om de topfunctie te gaan vervullen. AdChoices Advertentie Volgens bronnen tegen La Tribune is de keuze voor Capron zelfs al gemaakt door Air France-KLM en zal zijn voordracht volgende week worden voorgelegd aan de raad van toezicht bij het bedrijf. Capron zou dan de opvolger worden van de opgestapte topman Jean-Marc Janaillac. In mei trad Janaillac af nadat het hem niet was gelukt buiten de bonden om zaken te doen met het eigen personeel. Sindsdien heeft een interim-bestuur de dagelijkse leiding. De zestigjarige Capron is sinds 2014 financieel directeur bij Veolia. Daarvoor werkte hij onder meer bij mediaconcern Vivendi. Minder macht Overigens zijn er ook geruchten dat de nieuwe topman van Air France-KLM direct een zetel zou krijgen in de raad van commissarissen van KLM. Binnen de Nederlandse divisie, die juist alles op alles zet om minder macht naar Parijs te laten vloeien, is men volgens ingewijden verbolgen over die gang van zaken. ,,Stank voor dank", zo klinkt het in de wandelgangen. Eerder zou Janaillac ook al hebben geprobeerd om een dikkere vinger in de pap te krijgen bij KLM, dat door de bank genomen beter presteert dan haar Franse zustermaatschappij. Dit lukte eerder niet, onder meer door inmenging van het Nederlandse kabinet. AdChoices Advertentie Geruchten Een woordvoerder van Air France-KLM wilde niet reageren op de geruchtenstroom. Het concern gaat er vanuit dat binnen afzienbare tijd een nieuwe bestuursvoorzitter benoemd zal worden. Minister Cora van Nieuwenhuizen (Infrastructuur) wilde evenmin ingaan op geruchten. ,,Ik heb hierover nog geen contact gehad met KLM, dus dat wil ik eerst even afwachten'', zei ze. Tweede Kamerleden spraken deze week tijdens een debat nog maar eens hun zorg uit over de ontwikkelingen bij Air France-KLM. Zij drongen aan op herbevestiging van oude afspraken over de relatief zelfstandige positie van KLM binnen de groep.>Exit code: 0 Time: 28.52  
    • dadalt95
      By dadalt95
      Hi!
      I want to get the signal in this website:
      https://binary-signal.com/pt/chart/eurusd
      I have tried using _IEBodyReadText  and some _StringBetween. What happens is that the text are being update every tick and _IEBodyReadText doesn't.
      To perform the update I used  _IEAction($oIE, "refresh") but it's not good because the website block me after some time due too many requests..
      Is there any other way to get this text every tick?
      PS: The text I want to get is WAIT, CALL or PUT.
       
      Here is the code:
      global $oIE = _IECreate ('https://binary-signal.com/pt/chart/eurusd', 0, 1 , 1 , 0) Local $sText = _IEBodyReadText($oIE) $result = _StringBetween ( $sText , 'PUTEUR/USD on Binary-signal.com', 'sinal está PRONTA') ;MsgBox ( 0, "asf", $result[0]) $espera=StringInStr($result[0], "WAIT") $compra=StringInStr($result[0], "CALL") $venda=StringInStr($result[0], "PUT") ;MsgBox($MB_SYSTEMMODAL, "", $espera) $n=0 $c=0 Captar() Func Captar() ;_IENavigate($oIE, "https://binary-signal.com/pt/chart/eurusd") ;MsgBox($MB_SYSTEMMODAL, "", $n) Local $sText = _IEBodyReadText($oIE) $result = _StringBetween ( $sText , 'PUTEUR/USD on Binary-signal.com', 'sinal está PRONTA') If (Not $compra=0) And $n=0 Then MsgBox($MB_SYSTEMMODAL, "", "COMPRE") $n=1 $c=$c+1 ;_IEAction($oIE, "refresh") Sleep(60000) Captar() ElseIf (Not $venda=0) And $n=0 Then MsgBox($MB_SYSTEMMODAL, "", "VENDA") $c=$c+1 $n=1 ;_IEAction($oIE, "refresh") ;MsgBox($MB_SYSTEMMODAL, "", $n) Sleep(60000) Captar() ElseIf (Not $venda=0) And $n=1 Then ;MsgBox($MB_SYSTEMMODAL, "", "Esperando próxima rodada") $n=1 ;MsgBox($MB_SYSTEMMODAL, "", $n) ;_IEAction($oIE, "refresh") Sleep(60000) Captar() ElseIf (Not $venda=0) And $n=1 Then ;MsgBox($MB_SYSTEMMODAL, "", "Esperando próxima rodada") $n=1 ;MsgBox($MB_SYSTEMMODAL, "", $n) ;_IEAction($oIE, "refresh") Sleep(60000) Captar() Else ;MsgBox("", "", "ESPERE") $n=0 Sleep(1000) ;_IEAction($oIE, "refresh") Local $sText = _IEBodyReadText($oIE) $result = _StringBetween ( $sText , 'PUTEUR/USD on Binary-signal.com', 'sinal está PRONTA') Captar() EndIf EndFunc  
    • VollachR
      By VollachR
      Hi,
      I'm looking for a way to take a number value from a Row2 of a 2D array and according to this check if files that appear in rows 3-11 in the array exists.
      For example, if the number in Row2 is 5 I need to check for the files in Row 3-6 only, if it is 6 than rows 3-7 and so on.
      I thought on using a FOR loop but I have very little experience with those.
      Can you suggest the best way to do what I need?
      BTW, the files in Rows 3-11 will usually have blank value for any row above the number in Row2 (e.g. Row2 = 5 so Rows3-6 will have values but 8-11 be empty), The values I need are in Column 1 of the array, the name of the key from the INI file that the array was created from is in Column 0.
      Full Example:
      Row2 of Array:
      Col0 = Games# - Col1 = 5
      Rows3-6
      Col0 = Exe2 - Col1 = Path To File
      Col0 = Exe3 - Col1 = Path To File
      Col0 = Exe4 - Col1 = Path To File
      Col0 = Exe5 - Col1 = Path To File
      I need that if Row2 is 5 to check these above for rows if the file exists, if it was 6 then the next row as well and so on up until number 10 in Row2 as it can't go above 10.
      So basically for whatever number in Row2 from 2-10 need to check 1-9 rows from 3-11 to see if the files in Col1 exists and if any of them don't exist it should call a function that shows an error message.
      I'm pretty sure I have the first line of the for look correct:
      For $i = 1 To $aAIO[2][1] Just not sure how to continue from there, also not sure if $i should be equal 1 or 2.
      Help will be appreciated.
    • FMS
      By FMS
      Hello,
      I'm trying to get data from twitter to an array and so far I found an Twitter UDF whish lookes very intresting but couldn't get it to work.
      It lookes not supported any more(2010) and buggy when i read all te replies.
      More around this subject (autoit and twitter) i couldn't find on this forum.
      Is there sombody who know's a good way to get live data from twitter to an array inside autoit?
      (I kinda doubt that this isn't tackled before)
      In the end I was hoping to get all tweets from date to date from an specific subject inside a 2D array to work whit.
×