Jump to content

WebDriver UDF - Help & Support

Danp2

By Danp2,
in AutoIt General Help and Support

 Share

Recommended Posts

tigerwang Seeker

tigerwang

Posted
Posted

A new problem occured. I edit the program on windows server 2016. The geckodriver can't run at all whatever its version is 32 bit or 64 bit. All debug info is below:

"C:\Program Files (x86)\AutoIt3\SciTE\..\autoit3.exe" /ErrorStdOut "C:\soft\autoit\autoit\au3\ad.au3"    
_WDStartup: OS:    WIN_2016 WIN32_NT 14393 
_WDStartup: AutoIt:    3.3.14.5
_WDStartup: WD.au3:    0.1.0.21
_WDStartup: Driver:    C:\soft\autoit\autoit\au3\geckodriver.exe
_WDStartup: Params:    --log trace --connect-existing  --marionette-port 2828
_WDStartup: Port:    4444
__WD_Post: URL=HTTP://127.0.0.1:4444/session; $sData={"capabilities": {"alwaysMatch": {"browserName": "firefox", "acceptInsecureCerts":true}}}
__WD_Post: StatusCode=0; ResponseText=0
__WD_Post ==> Send / Recv error
_WD_CreateSession: 0
_WD_CreateSession ==> Webdriver Exception: HTTP status = 0
>Exit code: 0    Time: 1.979

It won't show the command window when I click the geckodriver.exe. 

However the same code can run well in local machine (Win10). I'm sure I close the firewall on windows server 2016. Somebody could help me??

Link to comment
Share on other sites
  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Danp2
Danp2

This is the "General Help and Support" thread for the WebDriver UDF. The UDF itself can be downloaded here. So if you have any questions, suggestions or errors please post here.

Danyfirex
Danyfirex

Hello @GregEisenberg You need to do this: Local $oJsonRect=_WD_ElementAction($sSession, $sElements, 'rect') ConsoleWrite("!" & Json_Get($oJsonRect, "[x]") & @CRLF) ConsoleWr

Gianni
Gianni

Time ago I wrote a function to extract data from  the source HTML code of tables. https://www.autoitscript.com/forum/topic/167679-read-data-from-html-tables-from-raw-html-source/ Seems that that fun

Posted Images

Danp2 Universalist

Danp2

Posted
  • Author
Posted
2 hours ago, tigerwang said:

A new problem occured. I edit the program on windows server 2016. The geckodriver can't run at all whatever its version is 32 bit or 64 bit. All debug info is below:

Sounds like this is an issue with your Windows installation, which isn't caused by this UDF. It's likely a security / rights issue. Have you tried the following?

  • Right click on the geckodriver executable
  • Select the Properties entry at the bottom
  • Look for and click the Unblock checkbox

Latest Webdriver UDF Release

Webdriver Wiki FAQs

Link to comment
Share on other sites
tigerwang Seeker

tigerwang

Posted
Posted
41 minutes ago, Danp2 said:

Sounds like this is an issue with your Windows installation, which isn't caused by this UDF. It's likely a security / rights issue. Have you tried the following?

  • Right click on the geckodriver executable
  • Select the Properties entry at the bottom
  • Look for and click the Unblock checkbox

I tried,but it did't work.

Link to comment
Share on other sites
nooneclose Universalist

nooneclose

Posted
Posted (edited)

Morning! Quick question, how do I get the value of an input field with WebDriver?

I know how to send values to an input field but I don't know how to read the value of an input field. 

Local $woTrack   = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//input[@id='nav_search_fld']")
    _WD_ElementAction($sSession, $woTrack, 'value', "work order tracking")
    _WD_ElementAction($sSession, $woTrack, 'text')

I use this to send data but I also want to check what value is in that field to make sure the data was properly sent. 

 

I figured it out: 

Here is the code I use to test against what was sent to the input field.  

; Send Data to Description
Local $eDescription = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//input[@id='mad3161b5-tb2']")
Do
    _WD_ElementAction($sSession, $eDescription, 'value', $testDesc)
    _WD_ElementAction($sSession, $eDescription, 'text')

    Local $test92 = _WD_ElementAction($sSession, $eDescription, 'property', 'value')
    ConsoleWrite(@CRLF & "$test92: " & $test92 & @CRLF)
    Sleep(500)
Until $test92 = $testDesc

This is more effective and efficient than using sleep which may be skipped or waste large amounts of time. 

Edited by nooneclose
Figured out the solution
Link to comment
Share on other sites
phoving Seeker

phoving

Posted
Posted

Hi everyone. I have this issue:

The webdriver returns the title of the page differently then _WD_GET displays it. This is in my log: 

1571135606630   webdriver::server       DEBUG   -> GET /session/dd2a1e5d-f315-474f-bae9-84341b4af31c/title
1571135606632   webdriver::server       DEBUG   <- 200 OK {"value":"CAS – Central Authentication Service"}
__WD_Get: StatusCode=200; $iResult = 0; $sResponseText={"value":"CAS û Central Authentication Service"}...

It must have something to do with the charset. Anyone knows how to handle this issue?

Link to comment
Share on other sites
phoving Seeker

phoving

Posted
Posted
5 hours ago, Danp2 said:

@phoving You'll need to provide more details. Some things to consider --

  • What is the default codepage for your Windows installation?
  • Are you running a non-English version of Windows?
  • Can you provide a short script that demonstrates the issue?

The default codepage is: 

C:\>chcp
Active code page: 850

C:\>

The windows version is Dutch.

The script is very simple. I request the title of a page. The title of the page is: "CAS &ndash; Central Authentication Service".

But __WD_GET returns it as "CAS û Central Authentication Service". So if I want to check the title in my script it fails. This is the script where I get the title: 

Func __EUP_GETTITLE()
    Local $sURL = $_WD_BASE_URL & ":" & $_WD_PORT & "/session/"& $__g_aEUP[$EUP_WD_SESSION][0] & "/title"
    Local $sResponse = __WD_Get($sURL)
    Local $sJSON = Json_Decode($sResponse)
    Return Json_Get($sJSON, "[value]")
EndFunc

 

Link to comment
Share on other sites
phoving Seeker

phoving

Posted
Posted
On 10/15/2019 at 9:58 PM, Danp2 said:

@phoving You are using a function that was intended for internal use only by the UDF's other functions. Can you explain why you aren't using the standard _WD_* functions? Have you tried calling _WD_Action instead?

No special reason, but I think that has nothing to do with the issue I am experiencing. Calling _WD_Action instead has this result: 

__WD_Get: URL=HTTP://127.0.0.1:4444/session/5b32358c-5a45-4e34-a370-0a6eceae403d/title
1571289885717   webdriver::server       DEBUG   -> GET /session/5b32358c-5a45-4e34-a370-0a6eceae403d/title
1571289885724   webdriver::server       DEBUG   <- 200 OK {"value":"CAS – Central Authentication Service"}
__WD_Get: StatusCode=200; $iResult = 0; $sResponseText={"value":"CAS û Central Authentication Service"}...
_WD_Action: {"value":"CAS û Central Authentication Service"}

I thought it has to do with the iMode in which _WinHttpSimpleRequest is called. I see this in the function header: 

;                  $iMode       - [optional] reading mode of result
;                  |0 - ASCII-text
;                  |1 - UTF-8 text
;                  |2 - binary data

But in tests I did not see any solution.

Link to comment
Share on other sites
phoving Seeker

phoving

Posted
Posted

@Danp2 I tested on an english windows, and got the same result.

I also changed the region settings / dat / time format etc. all to Central US.

You say you got the expected result. Is that: you got the same as I got, or do you get the "good" string? I do not understand how the webdriver can display the string correctly, but __WD_GET not.

 

Link to comment
Share on other sites
Danp2 Universalist

Danp2

Posted
  • Author
Posted

@phoving This is what I got when testing both sites -- 

__WD_Get: URL=HTTP://127.0.0.1:9515/session/c3566cf2620999fd9d670c32ad9d82e3/title
__WD_Get: StatusCode=200; $iResult = 0; $sResponseText={"value":"CAS – Central Authentication Service"}...
_WD_Action: {"value":"CAS – Central Authentication Service"}

 

Latest Webdriver UDF Release

Webdriver Wiki FAQs

Link to comment
Share on other sites
  • 2 weeks later...
Davidowicza Wayfarer

Davidowicza

Posted
Posted (edited)

Hey all,

I am having an issue getting the _WD functions to locate this link that I need to click on.

Link element that I need to click: 

<a href="/admintool/servlet/servlet.FileDownload?file=00Pt000000ICYQHEA5" target="_BLANK" class="actionLink">Review.pdf</a>

Xpath:
//*[@id="j_id0:theForm:j_id31:j_id33:0:j_id36"]/a

iFrame that it is in: 

<iframe allow="geolocation *; microphone *; camera *" frameborder="0" height="80%" id="j_id71" name="j_id71" src="website" title="Content" width="100%"></iframe>

What I have tried so far: 

_WD_FrameEnter($sSession,"j_id71") ;I have tried all this code without entering the frame too
if @error Then MsgBox(0, "Frame", @error) ;Does not throw error so I know I am in the frame


_WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//*[@id='j_id0:theForm:j_id31:j_id33:0:j_id36']/a"), 0, 10000)
if @error Then MsgBox(0, "ByXpath", @error)

_WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "/html/body/form/div[2]/div/div/div[1]/table/tbody/tr/td[1]/a"), 0, 10000) ;Not sure if this even works but I tried it anyway
if @error Then MsgBox(0, "ByFullXpath", @error)

_WD_WaitElement($sSession, $_WD_LOCATOR_ByLinkText, "Review.pdf", 0, 10000)
if @error Then MsgBox(0, "ByLinkText", @error)

_WD_WaitElement($sSession, $_WD_LOCATOR_ByPartialLinkText, "Review.pdf", 0, 10000)
if @error Then MsgBox(0, "ByPartialText", @error)

_WD_WaitElement($sSession, $_WD_LOCATOR_ByPartialLinkText, "Review", 0, 10000)
if @error Then MsgBox(0, "ByPartialText2", @error)

_WD_WaitElement($sSession, $_WD_LOCATOR_ByCSSSelector, ".actionLink")
if @error Then MsgBox(0, "ByCSS", @error)

All of these return @error = 7 (timeout) even though the element is loaded (takes half a second to appear on the screen) and I am completely stumped on another way to interact with it. And obviously since I cannot get my script to locate this element, all of the 'click' interactions return "No Match".

Anymore suggestions would be super helpful! Thanks!

PS: Unfortunately I cannot share this website since it has private information on it, but I will give as much info as I can.

Edited by Davidowicza
Link to comment
Share on other sites
tigerwang Seeker

tigerwang

Posted
Posted

How To  set UserAgent?   I tried this:

_WD_Option('Driver', 'geckodriver.exe')
    _WD_Option('DriverParams', '--log trace')
    _WD_Option('Port', 4444)
    $sDesiredCapabilities = '{"desiredCapabilities":{"setWindowRect":true,"javascriptEnabled":true,"nativeEvents":true,"acceptInsecureCerts":true,"browserName":"chrome","browserVersion":"45"}}'

 

But it still shows the real useragent :firefox....... when use _WD_Navigate.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...