Jump to content

Recommended Posts

antonioj84
Posted (edited)

Hi all to the forum guru and expert I am trying to  automate this. in the registry  I have the network profile name network 2 and network   I want to  change their  CATEGORY  to Private .  Can someone lead me in the right direction.

Private is 1 and Public is 0

#RequireAdmin

Global $sHKLMRoot = @OSArch = "x64" ? "HKLM64" : "HKLM"


RegWrite($sHKLMRoot &"\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\NewNetworks" ,'/v NetworkList /t REG_MULTI_SZ /d 00000000 /f')

see  attached picture below

Much appreaciate

 

registry.JPG

Edited by antonioj84

Share this post


Link to post
Share on other sites
xCROv

This topic over almost a year old and it doesn't look like you're really adding anything to it directly. It's prob best if you start your own topic.

 

You should follow the examples in this thread and read the regwrite function.

Share this post


Link to post
Share on other sites
Subz

As xCROv mentioned you should create a new thread and read the help file on RegWrite you will see your syntax is incorrect also you would need to use RegEnumKey, if you create a new post, I'll be happy to assist with your query.

 

Share this post


Link to post
Share on other sites
antonioj84

Thanks  Subz, and DanyFirex  Regnumkey was they key ingredient. If this can help someone else here is the code below 

#include <MsgBoxConstants.au3>
#RequireAdmin

Local Const $sHKLMRoot = @OSArch = "x64" ? "HKLM64" : "HKLM"

$iCategoryPrivate = 1
$iCategoryPublic = 0



Local $sSubKey =""
For $i =  1 To 2

$sSubKey = RegEnumKey($sHKLMRoot & "\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles", $i)
If @error Then ExitLoop




MsgBox($MB_SYSTEMMODAL, "SubKey #" & $i & " SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles: ", $sSubKey)


$sRegNetworkName = RegRead($sHKLMRoot & "\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles\" & $sSubKey, "ProfileName")


 MsgBox($MB_SYSTEMMODAL, "Profile #" & $i & " SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles: ", $sRegNetworkName)


$Category = Int(RegRead($sHKLMRoot & "\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles\" & $sSubKey, "Category"))


MsgBox($MB_SYSTEMMODAL, "Category #" & $i & " SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles: ", $Category)

;now you can write the key using regwrite to make category private or public
;~ RegWrite($sHKLMRoot & "\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles\" & $sSubKey, "Category", "REG_DWORD", $iCategoryPrivate)


Next

 

Share this post


Link to post
Share on other sites
Subz

I would normally write it this way, so you're not limited by multiple network connections

#RequireAdmin
Local $sHKLM = @OSArch = 'x64' ? 'HKLM64' : 'HKLM'
Local $sMainKey = $sHKLM & "\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles", $sSubkey, $i = 1
Local $iCategoryPrivate = 1, $iCategoryPublic = 0
While 1
    $sSubkey = RegEnumKey($sMainKey, $i)
        If @error Then ExitLoop
    If RegRead($sMainKey & "\" & $sSubkey, "ProfileName") = "Network" Then
;~      Uncomment line below to change category
;~      RegWrite($sMainKey & "\" & $sSubkey, "Category", "REG_DWORD", $iCategoryPrivate)
    ElseIf RegRead($sMainKey & "\" & $sSubkey, "ProfileName") = "Network 2" Then
;~      Uncomment line below to change category
;~      RegWrite($sMainKey & "\" & $sSubkey, "Category", "REG_DWORD", $iCategoryPrivate)
    EndIf
    $i += 1
WEnd
  • Thanks 1

Share this post


Link to post
Share on other sites
JLogan3o13

@antonioj84 you have been around long enough to know better than to hijack an old thread rather than creating your own. Please do so in the future.


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites
antonioj84
Posted (edited)

jologan3013 , xcrov already make that point please what else are you adding. I don't think a year old is that old after all. Are you able to move it to a new Topic ?

Edited by antonioj84
errorh

Share this post


Link to post
Share on other sites
JLogan3o13
Posted (edited)

The old topic was a year old; I have split your intrusion into its own topic. What I am adding is that you need to create your own topics so someone from the Moderating team does not have to spend 20 minutes splitting them out.

Edited by JLogan3o13
  • Like 1

√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Skeletor
      By Skeletor
      Hi Virtual People, 
      I'm trying to lock my screen in Windows 10 but to no avail. 
      Has Windows 10 forbidden this feature? 
      Send("#l") Above code does not work. Even sending Ctrl Alt Del does not work nor as an Admin. 
      Note: I want to lock my screen, not log off. Thanks for been kind.
       
    • astrionn
      By astrionn
      Hi Guys,
       
      I`m trying to record with my webcam in 5s intervalls and do some stuff between starting to record and stoping.
      I took code from here: https://www.autoitscript.com/forum/topic/27925-webcam-example/
      and took what looked relevant to me.
      I use 3 different files:
       Is called WMS.au3 and contains all the constants for the dll calls is called rec.au3 and does all necessary dll calls to start a webcam recording to a file Is called stopcam.exe and does the dll calls to stop recording into a file WMS.au3  :
      $WM_CAP_START = 0x400 $WM_CAP_UNICODE_START = $WM_CAP_START +100 $WM_CAP_PAL_SAVEA = $WM_CAP_START + 81 $WM_CAP_PAL_SAVEW = $WM_CAP_UNICODE_START + 81 $WM_CAP_UNICODE_END = $WM_CAP_PAL_SAVEW $WM_CAP_ABORT = $WM_CAP_START + 69 $WM_CAP_DLG_VIDEOCOMPRESSION = $WM_CAP_START + 46 $WM_CAP_DLG_VIDEODISPLAY = $WM_CAP_START + 43 $WM_CAP_DLG_VIDEOFORMAT = $WM_CAP_START + 41 $WM_CAP_DLG_VIDEOSOURCE = $WM_CAP_START + 42 $WM_CAP_DRIVER_CONNECT = $WM_CAP_START + 10 $WM_CAP_DRIVER_DISCONNECT = $WM_CAP_START + 11 $WM_CAP_DRIVER_GET_CAPS = $WM_CAP_START + 14 $WM_CAP_DRIVER_GET_NAMEA = $WM_CAP_START + 12 $WM_CAP_DRIVER_GET_NAMEW = $WM_CAP_UNICODE_START + 12 $WM_CAP_DRIVER_GET_VERSIONA = $WM_CAP_START + 13 $WM_CAP_DRIVER_GET_VERSIONW = $WM_CAP_UNICODE_START + 13 $WM_CAP_EDIT_COPY = $WM_CAP_START + 30 $WM_CAP_END = $WM_CAP_UNICODE_END $WM_CAP_FILE_ALLOCATE = $WM_CAP_START + 22 $WM_CAP_FILE_GET_CAPTURE_FILEA = $WM_CAP_START + 21 $WM_CAP_FILE_GET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 21 $WM_CAP_FILE_SAVEASA = $WM_CAP_START + 23 $WM_CAP_FILE_SAVEASW = $WM_CAP_UNICODE_START + 23 $WM_CAP_FILE_SAVEDIBA = $WM_CAP_START + 25 $WM_CAP_FILE_SAVEDIBW = $WM_CAP_UNICODE_START + 25 $WM_CAP_FILE_SET_CAPTURE_FILEA = $WM_CAP_START + 20 $WM_CAP_FILE_SET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 20 $WM_CAP_FILE_SET_INFOCHUNK = $WM_CAP_START + 24 $WM_CAP_GET_AUDIOFORMAT = $WM_CAP_START + 36 $WM_CAP_GET_CAPSTREAMPTR = $WM_CAP_START + 1 $WM_CAP_GET_MCI_DEVICEA = $WM_CAP_START + 67 $WM_CAP_GET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 67 $WM_CAP_GET_SEQUENCE_SETUP = $WM_CAP_START + 65 $WM_CAP_GET_STATUS = $WM_CAP_START + 54 $WM_CAP_GET_USER_DATA = $WM_CAP_START + 8 $WM_CAP_GET_VIDEOFORMAT = $WM_CAP_START + 44 $WM_CAP_GRAB_FRAME = $WM_CAP_START + 60 $WM_CAP_GRAB_FRAME_NOSTOP = $WM_CAP_START + 61 $WM_CAP_PAL_AUTOCREATE = $WM_CAP_START + 83 $WM_CAP_PAL_MANUALCREATE = $WM_CAP_START + 84 $WM_CAP_PAL_OPENA = $WM_CAP_START + 80 $WM_CAP_PAL_OPENW = $WM_CAP_UNICODE_START + 80 $WM_CAP_PAL_PASTE = $WM_CAP_START + 82 $WM_CAP_SEQUENCE = $WM_CAP_START + 62 $WM_CAP_SEQUENCE_NOFILE = $WM_CAP_START + 63 $WM_CAP_SET_AUDIOFORMAT = $WM_CAP_START + 35 $WM_CAP_SET_CALLBACK_CAPCONTROL = $WM_CAP_START + 85 $WM_CAP_SET_CALLBACK_ERRORA = $WM_CAP_START + 2 $WM_CAP_SET_CALLBACK_ERRORW = $WM_CAP_UNICODE_START + 2 $WM_CAP_SET_CALLBACK_FRAME = $WM_CAP_START + 5 $WM_CAP_SET_CALLBACK_STATUSA = $WM_CAP_START + 3 $WM_CAP_SET_CALLBACK_STATUSW = $WM_CAP_UNICODE_START + 3 $WM_CAP_SET_CALLBACK_VIDEOSTREAM = $WM_CAP_START + 6 $WM_CAP_SET_CALLBACK_WAVESTREAM = $WM_CAP_START + 7 $WM_CAP_SET_CALLBACK_YIELD = $WM_CAP_START + 4 $WM_CAP_SET_MCI_DEVICEA = $WM_CAP_START + 66 $WM_CAP_SET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 66 $WM_CAP_SET_OVERLAY = $WM_CAP_START + 51 $WM_CAP_SET_PREVIEW = $WM_CAP_START + 50 $WM_CAP_SET_PREVIEWRATE = $WM_CAP_START + 52 $WM_CAP_SET_SCALE = $WM_CAP_START + 53 $WM_CAP_SET_SCROLL = $WM_CAP_START + 55 $WM_CAP_SET_SEQUENCE_SETUP = $WM_CAP_START + 64 $WM_CAP_SET_USER_DATA = $WM_CAP_START + 9 $WM_CAP_SET_VIDEOFORMAT = $WM_CAP_START + 45 $WM_CAP_SINGLE_FRAME = $WM_CAP_START + 72 $WM_CAP_SINGLE_FRAME_CLOSE = $WM_CAP_START + 71 $WM_CAP_SINGLE_FRAME_OPEN = $WM_CAP_START + 70 $WM_CAP_STOP = $WM_CAP_START + 68 rec.au3  :
       
      #include <WMS.au3> #include <GUIConstants.au3> if not FileExists(@ScriptDir&"\vid\"&string(@MON)&"\"&string(@mday)) Then DirCreate(@ScriptDir&"\vid\"&"\"&string(@MON)&"\"&string(@mday)) EndIf $moviefile = @ScriptDir&"\vid"&"\"&string(@MON)&"\"&string(@mday)&"\test.avi" $avi = DllOpen("avicap32.dll") $user = DllOpen("user32.dll") FileWrite(@scriptdir&"\clop.clop",$user) $Main = GUICreate("Camera",350,270) $moviefile=@ScriptDir&"\test.avi" $cap = DllCall($avi, "int", "capCreateCaptureWindow", "str", "cap", "int", BitOR($WS_CHILD,$WS_VISIBLE), "int", 15, "int", 15, "int", 320, "int", 240, "hwnd", $Main, "int", 1) FileWrite(@scriptdir&"\clip.clip",$cap[0]) run(@scriptdir&"\stopcam.exe") DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_CONNECT, "int", 0, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_SCALE, "int", 1, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_OVERLAY, "int", 1, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEW, "int", 1, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEWRATE, "int", 1, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SET_CAPTURE_FILEA, "int", 0, "str", $moviefile) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SEQUENCE, "int", 0, "int", 0) Stopcam.exe is the compiled version of this:
      #include "WMS.au3" #include <GUIConstants.au3> $cap = Int(FileRead(@scriptdir&"\clip.clip")) $user = int(fileread(@scriptdir&"\clop.clop")) Sleep(10000) DllCall($user, "int", "SendMessage", "hWnd", $cap, "int", $WM_CAP_STOP, "int", 0, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap, "int", $WM_CAP_END, "int", 0, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap, "int", $WM_CAP_DRIVER_DISCONNECT, "int", 0, "int", 0) DllClose($user) FileDelete(@scriptdir&"\clip.clip") FileDelete(@scriptdir&"\clop.clop")  
      Unfortunately this is not working as I thought it would be working.
      Does someone see what I´m doing wrong?
      It should record the webcam for about 10 seconds ( a little less) and save that to an .avi file.
      It does not stop the recording , I have to stop the process manually...
      Secondly, which confuses me more is that it creates the test.avi not in the location is specified in the script... its stored in the ScriptDir for whatever reason haha
      I hope you can help me
       
      ~HappyCoding
    • Daydreamer067
      By Daydreamer067
      Hi
      in windows 10 i create a new desktop.
      I want to run a script in this desktop, for exemple Mouseclick("left",x,y)
      I want the script to work in that desktop while i switch to the primary desktop.
      So far autoit clicks on the active desktop.
      Is there a way to make it run only on the other desktop ?
       
      Thank you for your response.
    • codingislife
      By codingislife
      Hi everyone, 
      I'm new to the autoit world and am trying to do something a little complicated and am having trouble developing a solution. My OS after reimaging comes up with two operating system choices during boot up, I'd like to delete the incorrect OS. I have noticed that the default OS is always the correct OS. My issue is I need a way to find the OS identifier before I can delete. I know that I  can use bcdedit to find this but it changes every time and it needs to be the correct identifier (i.e. not the Default or bootmgr). If someone knows of a way to parse through the output of bcdedit to find the identifier that would be greatly appreciated. Here is an example of what I am trying to do:
      https://scottiestech.info/2016/07/03/remove-the-choose-an-operating-system-message-when-starting-your-computer/
    • PramodR
      By PramodR
      Hello,
      i am new to AUTO IT development , I would like one help to read value from a POP up.
      i am able to read below values using inspect tool , information given below, I tried to create a script to read value but that does not help. any help is appreciated.
      Available Controls
      POPUP window Controls
      Auto Id = "UpdateNow_Btn"
      Name = Update Now
      Invoke - Button Control
      Below Controls i get when i move inspector tool to the text which i need to read. i need to read the text Name . Currently with my code i get only blank text 
      Auto Id = timeOutLb
      ClassName = TextBlock
      LegacyIAccess = GetName
      Name  = Read Value for Name
       
      My code.
       
×