Jump to content

Recommended Posts

First off, the project I'm working on revolves around AS/400 "Client Access software", it's foundation is directly influenced by the thread linked at the bottom of this post. Moving on, to explain the problem I'm facing; my project utilizes an infinite While loop and automatically performs semi-hard coded monotonous tasks to save users time and effort, the problem is, occasionally and unexpectedly "Display Messages" will popup and the core script will continue executing instead of dismissing said message and the script "breaks". As a countermeasure I've added some code to the While loop in an effort to intervene and dismiss these display messages before the core script has a chance to do anything... however it doesn't work. I hope I didn't do too bad of a job explaining that. 

So I think my question is: How can I temporarily "pause" the core script when these messages spontaneously appear?

The only other solution I thought of would be to check if a display message has appeared before executing every line of code but that obviously isn't very practical.

Any and all help is greatly appreciated!

Thanks

 

;Loop to keep script running and handle display messages
While 1
   dismiss_display_messages()
   Sleep(50)
WEnd

;Function to dismiss display messages
Func dismiss_display_messages()
   If $ps.SearchText("Display Messages") Then
      $ps.SendKeys("[enter]", 8, 1)
      ;This while loop waits until the display message has disappeared to resume the core script
      While $ps.SearchText("Display Messages")
         Sleep(100)
      WEnd
   EndIf
EndFunc

 

 

Link to post
Share on other sites
1 hour ago, faustf said:

messagbox with answer , the script stay in pause till you press yes or not

If your recommending I put the MsgBox in the dismiss_display_messages()  function it won't help because the While loop seems to stop while the core script is running.

To further explain this, I put ConsoleWrites in the While loop to debug and noticed they stopped firing when the core script starts.

Link to post
Share on other sites
3 minutes ago, FrancescoDiMuro said:

@Rhidlor
The definition/declaration/initialization of $ps.

It's virtually identical to the declaration of $Ps in the topic I linked above.

Edit: I may as well post it here
 

$window = WinGetTitle("Session A - [24 x 80]")
$emulator_handle = WinGetHandle($window)
$session = StringMid(WinGetTitle($emulator_handle), 9, 1)
$obj_emul_session = ObjCreate("PCOMM.autECLSession")
$obj_emul_session.SetConnectionByName($session)
$ps = $obj_emul_session.autECLPS

 

Edited by Rhidlor
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mmoalem
      Hi all - I have created a simple script that turn on cctv software (contacam)  when my phone does not ping back (when I'm out of range of home network)
      #include <MsgBoxConstants.au3> $iPing = 0 For $i = 5 To 1 Step -1 ; this 5 loops cycle is just for testing - please ignnore - when complete it will be an endless loop Example() Sleep(120000) Next Func Example() ; Ping the phone. $iPing = Ping("192.168.1.102") If $iPing Then ; If a value greater than 0 was returned then turn off camera. _endCCTV() Else _startCCTV() ; If a value of 0 was returned then turn on camera. EndIf EndFunc ;==>Example Func _startCCTV() ShellExecute("C:\contacam capture\FJ Camera\CAMERA.bat", "on") Sleep(10000) ShellExecute("C:\contacam capture\FJ Camera\CAMERA_REC_SENSITIVITY.bat", "50") EndFunc Func _endCCTV() ShellExecute("C:\contacam capture\FJ Camera\CAMERA_REC_SENSITIVITY.bat", "0") Sleep(10000) ShellExecute("C:\contacam capture\FJ Camera\CAMERA.bat", "off") EndFunc  
       
      the problem I have is that in this format the script run the bat file that turn on the camera (or off) everytime the ping runs but obviously once the ping returns 0 and the camera starts I only want to run the bat on ping NOT 0 (turn off camera) 
      any ideas/advice?
    • By Jemboy
      Recently I was working on a script with icons using GuiCtrkCreatIcon.
      I decided to change the sub folder name of the icons to a more meaning name, however made a typo.

      I tested the .exe on my test computer and it worked flawlessly (because both icon folder where on my test computer) 😁
      But after I installed the script on the intended computers , I got chaos!😵
      Zooming into the problem, I discovered, that because the icons could not be found, the ControlID were returned with a value of 0
      and thus played havoc within the GuiGetMsg() switch/case statement.
      I have been able to reproduce this  (see example)
      #include <GUIConstantsEx.au3> ;============================================================================================================ ; PLEASE, do not save this example in the example folder: C:\Program Files (x86)\AutoIt3\Examples\Helpfile ;============================================================================================================ Example() Func Example() GUICreate(" My GUI Icons", 250, 250) $Icon1 = GUICtrlCreateIcon("shell32.dll", 10, 20, 20) $Icon2 = GUICtrlCreateIcon(@ScriptDir & '\Extras\horse.ani', -1, 20, 40, 32, 32) $Icon3 = GUICtrlCreateIcon("shell32.dll", 7, 20, 75, 32, 32) GUISetState(@SW_SHOW) ;$Icon2 = -1 ; ==> When this line is uncommented the script "works", so -1 could be a potential fix. ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Icon2 Beep (500,500) EndSwitch WEnd GUIDelete() EndFunc ;==>Example If you save the above script outside the Autoit example folder and run it, it will keep beeping because GuiCtrlCreatIcon did not find horse.ani and return $Icon2=0.
      At the moment GUICtrlCreateIcon () only returns the conntrolID on success and 0 on failure.
      I would like to propose a return of -1 on failure, so a existing and working script won't go awry when the icon can not be found.
       
    • By Vikramjeet
      include-once #include <File.au3> #include <Excel.au3> #include <String.au3> #include <MsgBoxConstants.au3> Local $file = "TEST.log" FileOpen($file, 0) $TTLPax = 1 For $i = _FileCountLines($file) - $TTLPax to _FileCountLines($file) $line = FileReadLine($file, $i) Global $TktNo = StringMid($line, 8, 13) ; reads 13 characters from $Line starting from the 8th character msgbox(0,'',$TktNo) ; This is just for me to debug For $NoOfPax = 1 to 2 local $TTLSeg = 2 msgbox(0,'',$TTLSeg) msgbox(0,'',"7ABC"& $TktNo &"'N"& $NoOfPax &".1'C1,2'S1,2'B") ; This makes 7ABC1234567890123'N1.1'C1,2'S1,2'B ;But in the next loop I want the value to be 7ABC1234567890333'N2.1'C1,2'S1,2'B Next ExitLoop Next *TEST
      JAMES BAKER
        1.NYC-23JAN
        2.TJ 1234567890123
        3.TJ 1234567890333
      I am reading a file with last 5 lines as above. I want to be able to loop through and pick the values as follows
      1- Pick 1234567890123
      2- Use it to build a format with N1.1
      3- Pick 1234567890333
      2- Use it to build a format with N2.1
      Need help with the loop. Thank You
       
       
    • By Vikramjeet
      For $A1 = 12 To 11 + $Total For $B1 = 1 To ($oExcel.Application.Cells($A1,6).Value) ; This value is from the Excel file. It can be from 1 - 9. For $N1 = 7 To ??? ; This is based on the value of $B1 ((1 = 7, 2 = 17, 3 = 27, 4 = 37, 5 = 47) Send("-"& ($oExcel.Application.Cells($A1,$N1).Value) &"/"& ($oExcel.Application.Cells($A1,$N1+1).Value)) Sleep(400) Send("{ENTER}") Sleep(700) Next Next Next I am not able to figure how to loop $N1 as follows
      If the Value of $B1 = 1 then $N1 = 7
      If the Value of $B1 = 2 then $N1 = 17
      If the Value of $B1 = 3 then $N1 = 27
      If the Value of $B1 = 4 then $N1 = 37  
      The value of $N1 comes from $B1 where 1 = 7, 2 = 17, 3 = 27, 4 = 37, 5 = 47)
      Thank You
    • By ssah8
      So im creating a bot that logs in on a website. The website got a dropdown menu, and I have to choose the right one to login (Student)
      #include <IE.au3>
      #inculude <Inet.au3>
      $oIE = _IECreate("<snip>")
      $Name = _IEGetObjByName($oIE, "ssusername")
      $Pass = _IEGetObjByName($oIE, "sspassword")
      $dropdown = _IEGetObjByName($oIE, "usertype")
      _IEPropertySet($Name, 'innerText', 'censored')
      _IEPropertySet($Pass, 'innerText', 'censored')
      _IEPropertySet($dropdown, 'innerText', 'Student') <------ How do I make the dropdown list select "Student"?
       
       
×
×
  • Create New...