Jump to content
Sign in to follow this  
supraaxdd

Although everything is declared, it shows Error code 0 and closes program.

Recommended Posts

Hello!

This time I am turning to you guys as the community to help me out with this problem that I have because the program declares an error code 0 and closes the program immediately after clicking the Proceed button (EU IS THE ONLY OPTION THAT WORKS).

I made a function that reads the combo box and if the option stated in the func are = to each other, it would use the _PingFunc.

Here is the code:
 

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$MainGUI = GUICreate("Internet Test", 400, 200, -1, -1)
$GroupBox1 = GUICtrlCreateLabel("Do you want to start testing your internet connection on your device?", 40, 50, 400, 20)
$AusWarn = GUICtrlCreateLabel("Note: Australia, South America and South Africa will not always" & @CRLF & "be pinged due to an unsteady connection.", 40, 80, 400, 40)
GUICtrlCreateGroup("", -1, -1, 1, 1)
$ButtonYes = GUICtrlCreateButton("&Yes", 230, 160, 75, 25)
$ButtonCan = GUICtrlCreateButton("&Cancel", 310, 160, 75, 25)
$ButtonUpL = GUICtrlCreateButton("Update Log", 10, 160, 75, 25)
GUISetState(@SW_SHOW)
$UpdGUI = GUICreate("Update Log", 400, 600, -1, -1)
$UpdGUILabel = GUICtrlCreateLabel("Update Log for v1.0.1:" & @CR & @CR & "- Changed the Australian IP for better connections." & @CR &  "- Displays the IP/Website the tool pinged" & @CR & @CR & @CR & "Update Log for v1.0.2" & @CR & @CR & "- Displays the IP/Website the tool pinged" & @CR & "- Added support for Middle East, South Africa, Asia and South America" & @CR & @CR & @CR & "Update Log for v1.0.3" & @CR & @CR & "- Added the Update Log" & @CR & "- Edited the note saying that some more regions may be buggy." & @CR & @CR & @CR & "Update Log for v1.0.4" & @CR & @CR & "- Fixed the Error UI closing the whole program.", 40, 30, 400, 500)
$ButtonCloseUpd = GUICtrlCreateButton("Close", 175, 560, 75, 25)
GUISetState(@SW_SHOW)
;~ ------------------------------------------------------------------------------------------------------------------------------------------------------------------------
$GUI2 = GUICreate("Which Region?", 400, 200, -1, -1)
$ButtonEU = GUICtrlCreateButton("Europe", 10, 20, 80, 30)
$ButtonNA = GUICtrlCreateButton("North America", 110, 20, 80, 30)
$ButtonAU = GUICtrlCreateButton("Australia", 210, 20, 80, 30)
$ButtonAS = GUICtrlCreateButton("Asia", 310, 20, 80, 30)
$ButtonSA = GUICtrlCreateButton("South America", 10, 60, 80, 30)
$ButtonAF = GUICtrlCreateButton("South Africa", 110, 60, 80, 30)
$ButtonME = GUICtrlCreateButton("Middle East", 210, 60, 80, 30)

$DropGUIEU = GUICreate("Europe", 200, 100, -1, -1)
$DropEU = GUICtrlCreateCombo(" - Please select an option -", 10, 15, 180, 15)
$CancelEU = GUICtrlCreateButton("Cancel", 110, 65, 80, 25)
$ProceedEU = GUICtrlCreateButton("Proceed", 10, 65, 80, 25)

$DropGUINA = GUICreate("North America", 200, 100, -1, -1)
$DropNA = GUICtrlCreateCombo(" - Please select an option -", 10, 15, 180, 15)
$CancelNA = GUICtrlCreateButton("Cancel", 110, 65, 80, 25)
$ProceedNA = GUICtrlCreateButton("Proceed", 10, 65, 80, 25)

$DropGUIAU = GUICreate("Australia", 200, 100, -1, -1)
$DropAU = GUICtrlCreateCombo(" - Please select an option -", 10, 15, 180, 15)
$CancelAU = GUICtrlCreateButton("Cancel", 110, 65, 80, 25)
$ProceedAU = GUICtrlCreateButton("Proceed", 10, 65, 80, 25)

$DropGUIAS = GUICreate("Asia", 200, 100, -1, -1)
$DropAS = GUICtrlCreateCombo(" - Please select an option -", 10, 15, 180, 15)
$CancelAS = GUICtrlCreateButton("Cancel", 110, 65, 80, 25)
$ProceedAS = GUICtrlCreateButton("Proceed", 10, 65, 80, 25)

$DropGUISA = GUICreate("South America", 200, 100, -1, -1)
$DropSA = GUICtrlCreateCombo(" - Please select an option -", 10, 15, 180, 15)
$CancelSA = GUICtrlCreateButton("Cancel", 110, 65, 80, 25)
$ProceedSA = GUICtrlCreateButton("Proceed", 10, 65, 80, 25)

$DropGUIAF = GUICreate("South Africa", 200, 100, -1, -1)
$DropAF = GUICtrlCreateCombo(" - Please select an option -", 10, 15, 180, 15)
$CancelAF = GUICtrlCreateButton("Cancel", 110, 65, 80, 25)
$ProceedAF = GUICtrlCreateButton("Proceed", 10, 65, 80, 25)

$DropGUIME = GUICreate("Middle East", 200, 100, -1, -1)
$DropME = GUICtrlCreateCombo(" - Please select an option -", 10, 15, 180, 15)
$CancelME = GUICtrlCreateButton("Cancel", 110, 65, 80, 25)
$ProceedME = GUICtrlCreateButton("Proceed", 10, 65, 80, 25)


;~ ---------------------------------------------------------------------------
$GUIConnecting = GUICreate("Connecting...",200,100,-1,-1)
$LabelConn = GUICtrlCreateLabel("Connecting..." ,40, 50, 400, 20)
;~ ----------------------------------------------------------------------------
$GUIErrOne = GUICreate("Error", 200, 150, -1, -1)
$LabelErrOne = GUICtrlCreateLabel("Host is offline.", 50, 50, 200, 15)
$BackToMain1 = GUICtrlCreateButton("Close", 110, 110, 80, 30)
;~ ---------------------------------------------------------------------------
$GUIErrTwo = GUICreate("Error", 200, 150, -1, -1)
$LabelErrTwo = GUICtrlCreateLabel("Host is unreachable.", 50, 50, 200, 15)
$BackToMain2 = GUICtrlCreateButton("Close", 110, 110, 80, 30)
;~ ---------------------------------------------------------------------------
$GUIErrThree = GUICreate("Error", 200, 150, -1, -1)
$LabelErrThree = GUICtrlCreateLabel("Bad destination.", 50, 50, 200, 15)
$BackToMain3 = GUICtrlCreateButton("Close", 110, 110, 80, 30)
;~ --------------------------------------------------------------------------
$GUIErrFour = GUICreate("Error", 200, 150, -1, -1)
$LabelErrFour = GUICtrlCreateLabel("Other errors.", 50, 50, 200, 15)
$BackToMain4 = GUICtrlCreateButton("Close", 110, 110, 80, 30)

GUISetState(@SW_HIDE, $GUI2)
GUISetState(@SW_HIDE, $ButtonEU)
GUISetState(@SW_HIDE, $ButtonNA)
GUISetState(@SW_HIDE, $ButtonAU)
GUISetState(@SW_HIDE, $ButtonAS)
GUISetState(@SW_HIDE, $ButtonAF)
GUISetState(@SW_HIDE, $ButtonME)

GUISetState(@SW_HIDE, $DropGUIEU)
GUISetState(@SW_HIDE, $DropGUINA)
GUISetState(@SW_HIDE, $DropGUIAU)
GUISetState(@SW_HIDE, $DropGUIAS)
GUISetState(@SW_HIDE, $DropGUISA)
GUISetState(@SW_HIDE, $DropGUIAF)
GUISetState(@SW_HIDE, $DropGUIME)

GUISetState(@SW_HIDE, $GUIConnecting)

GUISetState(@SW_HIDE, $GUIErrOne)
GUISetState(@SW_HIDE, $GUIErrTwo)
GUISetState(@SW_HIDE, $GUIErrThree)
GUISetState(@SW_HIDE, $GUIErrFour)

GUISetState(@SW_HIDE, $LabelErrOne)
GUISetState(@SW_HIDE, $LabelErrTwo)
GUISetState(@SW_HIDE, $LabelErrThree)
GUISetState(@SW_HIDE, $LabelErrFour)

GUISetState(@SW_HIDE, $BackToMain1)
GUISetState(@SW_HIDE, $BackToMain2)
GUISetState(@SW_HIDE, $BackToMain3)
GUISetState(@SW_HIDE, $BackToMain4)

;~ ----------------------------------------------------------------------------------------------
$DropOpt = ""
$Option = ""
;~ ----------------------------------------------------------------------------------------------

GUICtrlSetData($DropEU, "Ireland", " - Please select an option -")
GUICtrlSetData($DropNA, "Central US", " - Please select an option -")
GUICtrlSetData($DropAU, "Sydney", " - Please select an option -")
GUICtrlSetData($DropAS, "Bejing", " - Please select an option -")
GUICtrlSetData($DropSA, "Buenos Aires", " - Please select an option -")
GUICtrlSetData($DropAF, "Johannesburg", " - Please select an option -")
GUICtrlSetData($DropME, "Tel-Aviv", " - Please select an option -")
#EndRegion ### END Koda GUI section ###
;~ ----------------------------------------------------------------------------------------------

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg

         Case $GUI_EVENT_CLOSE
            Exit

         Case $ButtonYes
            GUISetState(@SW_SHOW, $GUI2)
            GUISetState(@SW_SHOW, $ButtonEU)
            GUISetState(@SW_SHOW, $ButtonNA)
            GUISetState(@SW_SHOW, $ButtonAU)
            GUISetState(@SW_SHOW, $ButtonAS)
            GUISetState(@SW_SHOW, $ButtonAF)
            GUISetState(@SW_SHOW, $ButtonME)

         Case $ButtonUpL
            GUISetState(@SW_SHOW, $UpdGUI)

         Case $ButtonCloseUpd
            GUISetState(@SW_HIDE, $UpdGUI)

         Case $ButtonEU
            GUISetState(@SW_SHOW, $DropGUIEU)
            GUISetState(@SW_SHOW, $DropEU)

         Case $CancelEU
            GUISetState(@SW_HIDE, $DropGUIEU)

         Case $ProceedEU
            DropRead($DropEU)

         Case $ButtonNA
            GUISetState(@SW_SHOW, $DropGUINA)
            GUISetState(@SW_SHOW, $DropNA)

         Case $CancelNA
             GUISetState(@SW_HIDE, $DropGUINA)

         Case $ButtonAU
            GUISetState(@SW_SHOW, $DropGUIAU)
            GUISetState(@SW_SHOW, $DropAU)

         Case $CancelAU
            GUISetState(@SW_HIDE, $DropGUIAU)

         Case $ButtonAS
            GUISetState(@SW_SHOW, $DropGUIAS)
            GUISetState(@SW_SHOW, $DropAS)

         Case $CancelAS
            GUISetState(@SW_HIDE, $DropGUIAS)

         Case $ButtonSA
            GUISetState(@SW_SHOW, $DropGUISA)
            GUISetState(@SW_SHOW, $DropSA)

         Case $CancelSA
            GUISetState(@SW_HIDE, $DropGUISA)

         Case $ButtonAF
            GUISetState(@SW_SHOW, $DropGUIAF)
            GUISetState(@SW_SHOW, $DropAF)

         Case $CancelAF
            GUISetState(@SW_HIDE, $DropGUIAF)

         Case $ButtonME
            GUISetState(@SW_SHOW, $DropGUIME)
            GUISetState(@SW_SHOW, $DropME)

         Case $CancelME
            GUISetState(@SW_HIDE, $DropGUIME)

         Case $BackToMain1
            GUISetState(@SW_HIDE, $GUIErrOne)

         Case $BackToMain2
            GUISetState(@SW_HIDE, $GUIErrTwo)

         Case $BackToMain3
            GUISetState(@SW_HIDE, $GUIErrThree)

         Case $BackToMain4
            GUISetState(@SW_HIDE, $GUIErrFour)

         Case $ButtonCan
            Exit
    EndSwitch
WEnd

Func _PingFunc($vPing, $iPingLimit = 250)
    GUISetState(@SW_SHOW, $GUIConnecting)
    GUISetState(@SW_SHOW, $LabelConn)
    Sleep(3000)
    Local $iPing = Ping($vPing, 250)
    If @error Then
        Switch @error
            Case 1
                GUISetState(@SW_SHOW, $GUIErrOne)
                GUISetState(@SW_SHOW, $LabelErrOne)
                GUISetState(@SW_SHOW, $BackToMain1)
                GUISetState(@SW_HIDE, $GUIConnecting)


            Case 2
                GUISetState(@SW_SHOW, $GUIErrTwo)
                GUISetState(@SW_SHOW, $LabelErrTwo)
                GUISetState(@SW_SHOW, $BackToMain2)
                GUISetState(@SW_HIDE, $GUIConnecting)

            Case 3
                GUISetState(@SW_SHOW, $GUIErrThree)
                GUISetState(@SW_SHOW, $LabelErrThree)
                GUISetState(@SW_SHOW, $BackToMain3)
                GUISetState(@SW_HIDE, $GUIConnecting)

            Case 4
                GUISetState(@SW_SHOW, $GUIErrFour)
                GUISetState(@SW_SHOW, $LabelErrFour)
                GUISetState(@SW_SHOW, $BackToMain4)
                GUISetState(@SW_HIDE, $GUIConnecting)

        EndSwitch
        Return
    EndIf
    If $iPing >= $iPingLimit Then
        MsgBox(4096, "Warning", "Your internet connection is unstable!" & @CRLF & "Internet connection speed: " & $iPing & "ms.")
        Msgbox(0,"SpeedTest","The IP/Website you connected to was: " & $vPing)
    Else
        MsgBox(4096, "SpeedTest", "Your internet connection is: " & $iPing & "ms.")
        Msgbox(0,"SpeedTest", "The IP/Website you connected to was: " & $vPing)
    EndIf
    GUISetState(@SW_HIDE, $GUIConnecting)
    GUISetState(@SW_HIDE, $LabelConn)
 EndFunc

 Func DropRead($Option)

   If $Option = $DropEU then
      GUICtrlRead($DropOpt)
      If $DropOpt = "Ireland" Then
         _PingFunc("google.ie")
      EndIf
   EndIf

I would really appreciate it if a member of this fantastic community helps.

 

Kind Regards,

Supra

Share this post


Link to post
Share on other sites
Just now, Jos said:

Just a quick glace at it, but you only have a case for $ProceedEU and none of the other $Proceed?? variables?

Jos 

I mentioned at the start that only EU works because I didn't implement the Proceed in any other button just yet.

I first expeirment with one button and if I get it right, I do it to all others.

 

Kind Regards,

Supra

 

Share this post


Link to post
Share on other sites

Ok, a simple debug line revealed your issue(s) in the DropRead() Func and changed it to this to continue with the ping():

Func DropRead($Option)
    If $Option = $DropEU Then
        $sel = GUICtrlRead($Option)
        ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $sel = ' & $sel & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console
        If $sel = "Ireland" Then
            _PingFunc("google.ie")
        EndIf
    EndIf
EndFunc   ;==>DropRead

Jos


SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
5 minutes ago, Jos said:

Ok, a simple debug line revealed your issue(s) in the DropRead() Func and changed it to this to continue with the ping():

Func DropRead($Option)
    If $Option = $DropEU Then
        $sel = GUICtrlRead($Option)
        ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $sel = ' & $sel & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console
        If $sel = "Ireland" Then
            _PingFunc("google.ie")
        EndIf
    EndIf
EndFunc   ;==>DropRead

Jos

May I ask, how does this debug work, I'm really new to this and I want this to be sucessful and I want to try the best as I can. This is also an opportunity for me to learn.

Kind Regards,

Supra

 

 

Share this post


Link to post
Share on other sites

I assume you will be using SciTE and you have installed the full SciTE4AutoIt3!

Just put the cursor on the variable you want to check and hit alt+d. This will insert an consolewrite statement which then will display the requested value in the SciTE output pane when it gets to that spot.

Jos


SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
31 minutes ago, Jos said:

I assume you will be using SciTE and you have installed the full SciTE4AutoIt3!

Just put the cursor on the variable you want to check and hit alt+d. This will insert an consolewrite statement which then will display the requested value in the SciTE output pane when it gets to that spot.

Jos

I will let you know how it will work for me, and yes, I'm using SciTE :)

Regards,

Supra

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...