Recently Browsing 0 members
No registered users viewing this page.
$sCommands1 = 'powershell.exe Get-ChildItem' $iPid = run($sCommands1 , @WorkingDir , @SW_SHOW , 0x2) $sOutput = "" While 1 $sOutput &= StdoutRead($iPID) If @error Then ExitLoop EndIf WEnd ;~ msgbox(0, '' , $sOutput) ConsoleWrite("$sOutput") ConsoleWrite($sOutput) ConsoleWrite(@CRLF) $aOutput = stringsplit($sOutput ,@LF , 2) For $i=0 To UBound($aOutput) - 1 Step 1 ConsoleWrite($aOutput[$i]) Next The script above reads the whole directory into a one dimensional array, but I need to work with the array, so I need to split the array into multiple dimensions.
I have already read some forum answers here, and I have already tried these commands:
Are there any way to use the $aOutput variable like in PowerShell:
$a = Get-ChildItem $a.Mode I imagine this in AutoIt $aOutput
ConsoleWrite($aOutput[i].Mode) Or if I split this command into 2 dimension like:
For $i To UBound($aOutput)-1 Step 1 ConsoleWrite($aOutput[$i]) ConsoleWrite($aOutput[$i]) Next
If I run this code, it works perfectly
$CmdPid = Run("C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit " & 'Get-ChildItem',@DesktopDir, @SW_SHOW) But this code
$CmdPid = Run("C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit " & 'Get-RDUserSession',@DesktopDir, @SW_SHOW) I get this error:
Get-RDUserSession : The term 'Get-RDUserSession' is not recognized as the name of a cmdlet, function, script file, or o perable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try aga in. If I try run the command Get-RDUserSession in normal PowerShell (started from windows start menu) the command works perfectly.
But If I run with AutoIt I get the above mentioned error .
I haven't used AutoIt in more than 10 years and I am sure a lot has improved since that long time. I hope you can give me some suggestions on my approach.
Task: I need to extract user data (for around 1700 users) from a website tool. That tool shows an output in a table on the website. However, no export feature is available and I need the data in an Excel file, such as:
username, serial number (of a laptop), ID number (of laptop) and some more
With my knowledge from 2009 I would do this:
1) use _IEextract with each username in the url to get the whole source code of the website with the user's data summary
2) Work with lots of regexpressions to extract each data piece, save them into variables/array
3) Write variable values into an Excel file
4) rinse repeat 1700 times
The relevant line for step 3 looks like this:
<td class="resultcell"><span class="new">2021-03-23 11:05:00</span></td><td class="resultcell">Hostname-1234</td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=serial%20numbers&criteria=123456">123456</a></td><td class="resultcell">0987654/td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=usernames&criteria=myusername">myusername</a> and so on.. so here it would be Hostname-1234, 0987654 and myusername that I would need to extract.
Although this may work it does not appear very efficient and would take a while. So I am happy for an alternate approach. Preferably, without using additional exe binary files due to company policies besides AutoIt itself.
I am just getting started with C and C++. I have created a pretty simple C code which is calling a dll function.
When I compile and run, I get the appropriate Output. So it works fine.
Now I would want to transform that to AutoIt. -> I would like to call the "RfcOpenConnection" function from AutoIt - but whatever I try with DLLCall, I can not get it to work.
Can someone point me in the right direction? DLL, C Sourcecode and compiled exe are attached too large to be attached, so they're uploaded here:
Thanks a bunch!
I am looking for a way to pull up a Child GUI Window that users can enter information into and return that information to the main for loop which is running off an array. However, I have been unable to do so because the For loop continues even though the child window is open. If I put in another while loop inside the child window function, I am not able to poll the windows for the events looking for the close button getting clicked.
I have put together a simple test application that shows this. Any help with holding the main loop while the child window is open and returning when the Close button is clicked is appreciated.
In the below example, the child window contains a single text box, however, on my main application the Child GUI is much more complex with multiple pieces of information being returned.
#include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Array.au3> AutoItSetOption("GUIOnEventMode", 1) Global $hGUI, $hChild Global $childClose = False Global $childValue OpenMainGUI() While Sleep(100) ConsoleWrite("Main Loop") WEnd Func OpenMainGUI() ; Create a GUI with various controls. Local $hGUI = GUICreate("Example", 400, 100) $btnMain = GUICtrlCreateButton("Open", 10, 10, 100, 30) ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) ; Events GUISetOnEvent($GUI_EVENT_CLOSE, "_ExitMain", $hGUI) GUICtrlSetOnEvent($btnMain, "createChildren") EndFunc ;==>Example Func createChildren() For $i = 1 to 5 createChild($i) ConsoleWrite($i & " - " & $childValue & @CRLF) Next EndFunc Func createChild($valInp) $childClose = False $hChild = GUICreate("Child GUI", 210, 72, -1, -1, -1, -1, $hGUI) $txtOperation = GUICtrlCreateInput($valInp, 10, 10, 100, 20) $btnCloseChild = GUICtrlCreateButton("Close", 10, 40, 100, 30) GUICtrlSetOnEvent($btnCloseChild, "_ExitChild") ; Display Child GUISetState(@SW_SHOW) ;Wait here till Close button is clicked While $childClose = False ConsoleWrite("Stuck in this loop..." & @LF) Sleep(100) $aMsg = GUIGetMsg(1) If $aMsg >0 Then _ArrayDisplay($aMsg) Wend EndFunc Func _ExitMain() Exit EndFunc Func _ExitChild() ConsoleWrite("Exit Child Called") $childValue = GUICtrlRead($txtOperation) $childClose = True GUIDelete($hChild) EndFunc Thanks in advance for any help offered.
My other alternative is to create a separate EXE for the child window and use ShellExecuteWait to wait for the child window to close before the loop continues, but I am hoping to avoid doing that.