Jump to content

_FileWriteToLine stopped working in script

WhaleJesus
 Share Followers 1

Recommended Posts

WhaleJesus

WhaleJesus 1

Posted
Posted 
#include <FileConstants.au3>
#include <MsgBoxConstants.au3>
#include <file.au3>
; Create Data Folder if it doesn't exist yet
If FileExists(@ScriptDir & "\Data") Then

Else
    ShellExecute(@ScriptDir)
    DirCreate(@ScriptDir & "\Data")
EndIf

; Playlist Name & location input
Global $playlistnameinput = InputBox("Playlist", "Enter The playlist name", _
        "Name")

Global $playlistlocationinput = InputBox("Location", "Specify where you would like the playlist folder to be stored", @ScriptDir & "\Playlists\" & $playlistnameinput)


; Create file in Data folder and other vars
Global $sDataFile = @ScriptDir & "\Data\Data.txt"
Global $DataHandle = FileOpen($sDataFile, 1)
Global $DataFileLine = FileReadLine($sDataFile, 1)
FileClose($DataFileLine)
MsgBox(0, "", $DataFileLine, 10)

; Prove it exists

If FileExists($sDataFile) Then
    _FileWriteToLine($DataHandle, $DataFileLine, $playlistnameinput, True, True)
    $DataFileLine += 1
    _FileWriteToLine($DataHandle, 1, $DataFileLine, True)
Else
    MsgBox($MB_SYSTEMMODAL, "Error", "File " & $sDataFile & "Does not exist")
EndIf

Global $sPDataFile = @ScriptDir & "\Data\" & $playlistnameinput & "_Data.txt"
Global $PDataHandle = FileOpen($sPDataFile, 1)

If FileExists($sPDataFile) Then
    _FileWriteToLine($PDataHandle, 1, $playlistnameinput, True, True)
    _FileWriteToLine($PDataHandle, 2, $playlistlocationinput, True, True)
Else
    MsgBox($MB_SYSTEMMODAL, "Error", "File " & $sPDataFile & "Does not exist")
EndIf

_FileWriteToLine stopped working and i don't know what it is in my code that's causing this, please help

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Followers 1
Go to topic listing

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • bogQ
      Font size change gui control to italic with no apparent reason
      By bogQ
      Simple script latest autoit version.
      #include <GUIConstantsEx.au3> #include <FontConstants.au3> Example() Func Example() GUICreate("test", 800, 540) GUISetFont(12, $FW_NORMAL, $GUI_FONTNORMAL) GUICtrlCreateLabel("testing",680,310) GUISetState(@SW_SHOW) Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() EndFunc ;==>Example After using GUISetFont(12) or GUISetFont(12, $FW_NORMAL, $GUI_FONTNORMAL) every GUI control is changed to italic.
       
      Am i doing something wrong?

    • woffi
      Read from console
      By woffi
      Hi,
      I'm afraid I'm just stupid or blind or both: how can I read user input from an AutoIt console program? Just a simple String input, terminated with pressing "Return"? 

      This can't be difficult, but I can't find a solution.
    • DannyJ
      How to read PowerShell command into a multiple dimensional dimensional array? - (Moved)
      By DannyJ
      $sCommands1 = 'powershell.exe Get-ChildItem' $iPid = run($sCommands1   , @WorkingDir , @SW_SHOW , 0x2) $sOutput = ""  While 1     $sOutput &= StdoutRead($iPID)         If @error Then             ExitLoop         EndIf  WEnd ;~ msgbox(0, '' , $sOutput) ConsoleWrite("$sOutput") ConsoleWrite($sOutput) ConsoleWrite(@CRLF) $aOutput = stringsplit($sOutput ,@LF , 2) For $i=0 To  UBound($aOutput) - 1 Step 1     ConsoleWrite($aOutput[$i]) Next The script above reads the whole directory into a one dimensional array, but I need to work with the array, so I need to split the array into multiple dimensions.
      I have already read some forum answers here, and I have already tried these commands:
       
      Are there any way to use the $aOutput variable like in PowerShell:
      PowerShell:
      $a = Get-ChildItem $a.Mode I imagine this in AutoIt  $aOutput
      ConsoleWrite($aOutput[i].Mode) Or if I split this command into 2 dimension like:
      For $i To UBound($aOutput)-1 Step 1 ConsoleWrite($aOutput[$i][1]) ConsoleWrite($aOutput[$i][2]) Next  
    • DannyJ
      [Solved] How to run Powershell with AutoIt and use Get-RDUserSession command?
      By DannyJ
      If I run this code, it works perfectly
      $CmdPid = Run("C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit " & 'Get-ChildItem',@DesktopDir, @SW_SHOW) But this code
      $CmdPid = Run("C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit " & 'Get-RDUserSession',@DesktopDir, @SW_SHOW) I get this error:
      Get-RDUserSession : The term 'Get-RDUserSession' is not recognized as the name of a cmdlet, function, script file, or o perable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try aga in. If I try run the command Get-RDUserSession  in normal PowerShell (started from windows start menu) the command works perfectly.
      But If I run with AutoIt I get the above mentioned error .
      Any ideas?
    • Automania
      [solved] extract data from website and export to Excel - (Moved)
      By Automania
      Hi all,
      I haven't used AutoIt in more than 10 years and I am sure a lot has improved since that long time. I hope you can give me some suggestions on my approach.
      Task: I need to extract user data (for around 1700 users) from a website tool. That tool shows an output in a table on the website. However, no export feature is available and I need the data in an Excel file, such as:
      username, serial number (of a laptop), ID number (of laptop) and some more
       
      With my knowledge from 2009 I would do this:
      1) use _IEextract with each username in the url to get the whole source code of the website with the user's data summary
      2) Work with lots of regexpressions to extract each data piece, save them into variables/array
      3) Write variable values into an Excel file
      4) rinse repeat 1700 times
       
      The relevant line for step 3 looks like this:
      <td class="resultcell"><span class="new">2021-03-23 11:05:00</span></td><td class="resultcell">Hostname-1234</td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=serial%20numbers&criteria=123456">123456</a></td><td class="resultcell">0987654/td><td class="resultcell"><a href="?&Search=Search&result=summarized%20history&field=usernames&criteria=myusername">myusername</a> and so on.. so here it would be Hostname-1234, 0987654 and myusername that I would need to extract.

      Although this may work it does not appear very efficient and would take a while. So I am happy for an alternate approach. Preferably, without using additional exe binary files due to company policies besides AutoIt itself.
×
×
  • Create New...