Jump to content

Not able to copy to clipboard while server is disconnected


Recommended Posts

  • Moderators

@learner123 I see you have not bothered to read the forum rules to which you have now been pointed multiple times. If you had you would have seen this:

Quote

7. Do not repost the same question if the previous thread has been locked - particularly if you merely reword the question to get around one of the prohibitions listed above.

No one is fooled by these tactics. Do not post this question again, our patience has its limits.

"Profanity is the last vestige of the feeble mind. For the man who cannot express himself forcibly through intellect must do so through shock and awe" - Spencer W. Kimball

How to get your question answered on this forum!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Iraj
      Greetings!
      I am trying to pass parameters using Send () function as below
      $sFilePath = @ScriptDir & "\config.ini" Local $hFileOpen = FileOpen($sFilePath, $FO_READ) Local $sURLUsername = FileReadLine($hFileOpen, 1) Local $sURLPassword = FileReadLine($hFileOpen, 2) Local $sAutomation = FileReadLine($hFileOpen, 3) Run("chrome facebook.com") Sleep(5000) Send($sAutomation) FileClose($hFileOpen) The config.ini file contains below lines
      abcd wxyz $sURLUsername{TAB}$sURLPassword{ENTER} While running,  I am getting $sURLUsername & $sURLPassword in the username & password field instead of abcd & wxyz as provided.
      Refer image below:

       
      Where am I going wrong? Any suggestions or assistance will be grateful. 
    • By HoangDung
      This is the function that returns the result from cmd, initially i connect to the network wait then i make a call to the above _GetDOSOutput($sCommand) function i want to wait 1 period of time netsh wlan connect name="name" actually but after starting to execute the netsh wlan show interfaces command i tried adding a timeout command it seems to have ignored the timeout command?
      #include <WindowsConstants.au3> #include <Constants.au3> Func _GetDOSOutput($sCommand) Run('"' & @ComSpec & '" /c ' & $sCommand, "", @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD) Local $sOutput = '' Local $iPID = Run('"' & @ComSpec & '" /c ' & $sCommand, "", @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD) While 1 $sOutput &= StdoutRead($iPID, False, False) If @error Then ExitLoop EndIf Sleep(10) WEnd Return $sOutput EndFunc Local $sCommand= 'netsh wlan delete profile name="wait" & netsh wlan connect name="name" interface="Wi-fi" & netsh wlan show interfaces' MsgBox(0,0,_GetDOSOutput($sCommand))  
    • By D3fr0s7
      I'm trying to make one tray item delete another, but when I do this, all tray items that were created after the deleted item don't work as intended, as if their controlID's were all shifted down one value, and their corresponding tray items now (after deletion) run the code of the tray item before it. Am I missing something? Is there a better way to accomplish what I'm trying to do?
      #include <TrayConstants.au3> #include <Array.au3> HotKeySet ( "{ESC}", "Abort" ) Opt ( "TrayMenuMode", 3 ) TraySetState($TRAY_ICONSTATE_SHOW) ; Show the tray menu. Global $aTray[8] ; Defines array to hold tray items. $aTray[0] = TrayCreateItem ( "Test 1 (Name Test 5)" ) $aTray[1] = TrayCreateItem ( "Test 2 (Delete Test 5)" ) $aTray[2] = TrayCreateItem ( "Test 3 (Restore Test 5)" ) $aTray[3] = TrayCreateItem ( "Test 4 (Check if Test 5 is blank or space)" ) $aTray[4] = TrayCreateItem ( "Test 5 Delete Me" ) $aTray[5] = TrayCreateItem ( "Test 6 (Check Test 5 Text)" ) $aTray[6] = TrayCreateItem ( "Test 7 (Read Values)" ) $aTray[7] = TrayCreateItem ( "Test 8 (Count Blanks)" ) While 1 Switch TrayGetMsg() Case $aTray[0] ; "Test 1" Change Test 5 Text. If TrayItemGetText ( $aTray[0] ) <> "" Then Global $TrayText = InputBox ( "Test", "Choose text for Test 5", "Test 5 Delete Me" ) TrayItemSetText ( $aTray[4], $TrayText) EndIf Case $aTray[1] ; "Test 2" Deletes "Test 5". If TrayItemGetText ( $aTray[1] ) <> "" Then Global $TrayDeletedName = TrayItemGetText ( $aTray[4] ) TrayItemDelete ( $aTray[4] ) _ArrayInsert ( $aTray, 4 ) EndIf Case $aTray[2] ; "Test 3" Restores "Test 5". If TrayItemGetText ( $aTray[2] ) <> "" Then $aTray[4] = TrayCreateItem ( $TrayDeletedName ) EndIf Case $aTray[3] ; "Test 4" Check if Test 5 value is blank, space, or filled. If TrayItemGetText ( $aTray[3] ) <> "" Then If TrayItemGetText ( $aTray[4] ) = "" Then MsgBox ( 0, "Test", "Test 5 is blank" ) ElseIf TrayItemGetText ( $aTray[4] ) = " " Then MsgBox ( 0, "Test", "Test 5 is not blank (space)" ) Else MsgBox ( 0, "Test", "Test 5 is assigned a value" ) EndIf EndIf Case $aTray[4] ; "Test 5" (Item to test for, during, and after deletion). If TrayItemGetText ( $aTray[4] ) <> "" Then MsgBox ( 0, "Test", "I'm here!" ) EndIf Case $aTray[5] ; "Test 6" Displays Text from Test 5 item. If TrayItemGetText ( $aTray[5] ) <> "" Then $Test5Text = TrayItemGetText ( $aTray[4] ) MsgBox ( 0, "Test", "Test 5 Text: " & $Test5Text ) EndIf Case $aTray[6] ; "Test 7" Displays all item values. If TrayItemGetText ( $aTray[6] ) <> "" Then MsgBox ( 0, "Test", "$aTray[0]: " & $aTray[0] & @CRLF & _ "$aTray[1]: " & $aTray[1] & @CRLF & _ "$aTray[2]: " & $aTray[2] & @CRLF & _ "$aTray[3]: " & $aTray[3] & @CRLF & _ "$aTray[4]: " & $aTray[4] & @CRLF & _ "$aTray[5]: " & $aTray[5] & @CRLF & _ "$aTray[6]: " & $aTray[6] & @CRLF & _ "$aTray[7]: " & $aTray[7] & @CRLF ) EndIf Case $aTray[7] ; "Test 8" Counts all blanks in tray values. If TrayItemGetText ( $aTray[7] ) <> "" Then Global $blankCount = _ArrayFindAll ( $aTray, "" ) If $blankCount = -1 Then If @error = 6 Then MsgBox ( 0, "Test", "Error, No blanks present") EndIf Else MsgBox ( 0, "Test", "# of blanks: " & $blankCount ) EndIf EndIf EndSwitch WEnd Func Abort() Exit EndFunc Here is a test script I created to try to troubleshoot the problem on my own, with no luck. pay specific attention to "Test 2" ($aTray[1]), "Test 5" ($aTray[4]), and how every tray item after "Test 5" ($aTray[4]) behaves after deletion. Clicking "Test 2" will delete tray item "Test 5", after deletion every item runs the code of the tray item that was established before it (ex. "Test 3" and "Test 4" run their respective code, "Test 5" no longer exists, "Test 6" runs "Test 7", "Test 7" runs "Test 8"), and the last item ("Test 8" $aTray[7]) has no effect when the tray item is clicked. 

      I understand that deleting the tray item changes the controlID, but I don't know in what way it does, and therefore how I can fix it to be able to achieve what I want it to. I appreciate any help or guidance with this problem.

      To clarify, what I'm ultimately trying to do is create a 'while' loop with switch case functions that can exist without necessarily being linked to a tray item, so that I can add and delete them at liberty using the script's functions, without having to differentiate switch case functions with if functions (if $aTray[x] exists, then use this set of switch case functions, etc.). 

      Please, I am in pain. Water come school me again pls
    • By PeterVerbeek
      This topic give you access to an AutoIt functions library I maintain which is called PAL, Peter's AutoIt Library. The latest version 1.26 contains 214 functions divided into these topics:
      window, desktop and monitor GUI, mouse and color GUI controls including graphical buttons (jpg, png) GUI numberbox controls for integer, real, binary and hexadecimal input logics and mathematics include constants string, xml string and file string dialogues and progress bars data lists: lists, stacks, shift registers and key maps (a.ka. dictionaries) miscellaneous: logging/debugging, process and system info Change log and files section  on the PAL website (SourceForge).
      A lot of these functions were created in the development of Peace, Peter's Equalizer APO Configuration Extension, which is a user interface for the system-wide audio driver called Equalizer APO.
    • By Zaoka
      HI,
      for couple of years I'm using  Jos script for sending reports, email with excel attachment. But from last week i'm getting this error when sending excel or word attachment
      message has lines too long for transport jpeg, pdf works with no problems, any sugestion ?
×
×
  • Create New...