Sign in to follow this  
Followers 0
rudolph

GuiTab with ListViews - Double Click problem

4 posts in this topic

Hello Everybody:

I built a Gui with 2 Tabs (Tab0 , Tab1) and inside with a ListView of items (Desktop items, Myfavorites items).

When I go to Tab0 and double click an item from ListView1, It works, I can get the correct Item Text in a message Box.

But here is the problem, when I change to Tab1 and double click an item from ListView2, It gives me a wrong item text,

Someone can help on this, please.

I use the double click routine from Gary Frost.

you can run the code below :

#include <GUIConstants.au3>
#include <GuiTab.au3>
#include<array.au3>
#include<_FileListToArrayNew2g.au3>
Global Const $WM_NOTIFY = 0x004E
Global Const $DebugIt = 1
;ListView Events
Global Const $NM_FIRST = 0
Global Const $NM_LAST = (-99)
Global Const $NM_OUTOFMEMORY = ($NM_FIRST - 1)
Global Const $NM_CLICK = ($NM_FIRST - 2)
Global Const $NM_DBLCLK = ($NM_FIRST - 3)

Global $j1
Global $av_ListViews[3];Array starts idx=0 
Global $avTabs[10];Array starts idx=0 
$Style1 = BitOR($WS_THICKFRAME, $WS_SIZEBOX)

;Creating the GUI
$hGui = GUICreate("GUI Name",810, 623, (@DesktopWidth - 800) / 2, (@DesktopHeight - 600) / 2,$WS_MAXIMIZEBOX  + $WS_MINIMIZEBOX)

;; Create tab box
$TabCtrl = GUICtrlCreateTab(10, 10, 580, 340)
$av_ArrayTabs = _ArrayCreate("Programs", "Favorites"); Array of Tab names, starts in elem zero.

;Tab0 - Create Tab item 0
$avTabs[0] = GUICtrlCreateTabItem($av_ArrayTabs[0])
;Load Desktop PROGRAMS
LoadDesktopPgmInListView()
_GUICtrlTabSetCurSel($TabCtrl, 0)

;;Tab1 - Create Tab item 1
$avTabs[1] = GUICtrlCreateTabItem($av_ArrayTabs[1])
LoadMyFavoritesURLInListView()
_GUICtrlTabSetCurSel($TabCtrl, 1)

GUICtrlCreateTabItem(""); Closes out the tabitems

; GUI Loop
GUISetState()

;Register WM_NOTIFY  events
GUIRegisterMsg($WM_NOTIFY, "WM_Notify_Events")

While 1
   $msg = GUIGetMsg()
   Switch $msg
   ;-----------------------------------------------------------------------------------------
   ;This case statement exits and updates code if needed
      Case $GUI_EVENT_CLOSE
         Exit
        
         
      ;-----------------------------------------------------------------------------------------
      ;put all the misc. stuff here
        Case Else
           ;;;
   EndSwitch
WEnd

;;Insert items in ListView with Desktop Shortcuts
Func LoadDesktopPgmInListView()
    $DesktopDir = @DesktopDir
    Local $sPath = $DesktopDir, $Flag=1, $Recurse=0, $BasDir=1, $filter = "*.lnk"    
    $av_ArrayPaths = _FileListToArray3 ($sPath, $filter, $Flag, $Recurse, $BasDir);Get full paths of folders from Desktop, 0 elem=num occurences 
    $Count = $av_ArrayPaths[0]
    $av_ListViews[0] = GUICtrlCreateListView("Applications  ", 15, 30, 550, 350) ; First ListView
    _GUICtrlListViewSetColumnWidth ($av_ListViews[0], 0, 500)  ; Size of the First Column 0, in the List view 
    GUICtrlSendMsg($av_ListViews[0], $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES)  ;Gridlines
    GUICtrlSendMsg($av_ListViews[0], $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT)
    For $k = 1 To Number($Count)
        GUICtrlCreateListViewItem("item " & $k & " " & $av_ArrayPaths[$k], $av_ListViews[0])
    Next
EndFunc  

;;Insert items in ListView with MyFavorites URL
Func LoadMyFavoritesURLInListView()
    $FavoritesURL = @FavoritesDir
    Local $sPath = $FavoritesURL, $Flag=1, $Recurse=0, $BasDir=1, $filter = "*.url"  
    $av_ArrayPaths = _FileListToArray3 ($sPath, $filter, $Flag, $Recurse, $BasDir);Get full paths of files from MyFavorites, 0 elem=num occurences 
    $Count = $av_ArrayPaths[0]
    $av_ListViews[1] = GUICtrlCreateListView("MyFavorites URL ", 15, 30, 550, 350) ; Second ListView
    _GUICtrlListViewSetColumnWidth ($av_ListViews[1], 0, 500)  ; Size of the First Column 0, in the List view 
    GUICtrlSendMsg($av_ListViews[1], $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES)  ;Gridlines
    GUICtrlSendMsg($av_ListViews[1], $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT)
    For $k = 1 To Number($Count)
        GUICtrlCreateListViewItem("item " & $k & " " & $av_ArrayPaths[$k], $av_ListViews[1])
    Next
EndFunc  

; WM_NOTIFY event handler
Func WM_Notify_Events($hWndGUI, $MsgID, $wParam, $lParam)
    #forceref $hWndGUI, $MsgID, $wParam
    Local $tagNMLISTVIEW , $event, $hwndFrom, $code
    $tagNMLISTVIEW = DllStructCreate("int;int;int;int;int;uint;uint;uint;int;int", $lParam);NMHDR (hwndFrom, idFrom, code), (iItem, iSubItem, uNewState, uOldState, uChanged, ptAction)
    If @error Then Return
    $event = DllStructGetData($tagNMLISTVIEW, 3)
    For $j1 = 0 To 2
        If $wParam = $av_ListViews[$j1] Then
            if  $event = $NM_DBLCLK Then
                    MsgBox(0,"Double Clicked ctrlidLV = ", $av_ListViews[$j1])
                    ListView_DoubleClick () 
                    MsgBox(0, "exit loop:", "Tab" & $j1)
                    ExitLoop
            EndIf
        EndIf
    Next

    $tagNMHDR = 0
    $event = 0
    $lParam = 0
EndFunc  ;==>WM_Notify_Events

Func _DebugPrint($s_text)
    $s_text = StringReplace($s_text, @LF, @LF & "-->")
    ConsoleWrite("!===========================================================" & @LF & _
            "+===========================================================" & @LF & _
            "-->" & $s_text & @LF & _
            "+===========================================================" & @LF)
EndFunc  ;==>_DebugPrint

Func ListView_Click()
   ;-----------------DISABLE -----------------------------------------------------------------------------
   ;If $DebugIt Then    _DebugPrint ("$NM_CLICK");; Writes to console 
   ;----------------------------------------------------------------------------------------------
EndFunc  ;==>ListView_Click

Func ListView_DoubleClick()
    local $indiceselect
   ;----------------------------------------------------------------------------------------------
    If $DebugIt Then    _DebugPrint ("$NM_DBLCLK")
   ;----------------------------------------------------------------------------------------------
    $indiceselect =  _GUICtrlListViewGetSelectedIndices($av_ListViews[$j1])
    MsgBox(0,"Double Clicked", _GUICtrlListViewGetItemText($av_ListViews[$j1], $indiceselect) )
EndFunc  ;==>ListView_DoubleClick

Also here is the Function, _FileListToArrayNew2g.au3 if someone can not find it:

#include-once
#include<array.au3>
;~ #include "_GUILV1.au3"
;~ #AutoIt3Wrapper_useansi=y
;===============================================================================
;
; Description:    lists all files and folders in a specified path
; Syntax:          _FileListToArray($s_Path, $s_Filter = "*", $i_Flag = 0)
; Parameter(s):     $s_Path = Path to generate filelist for
;                   $s_Filter = The filter to use. Search the Autoit3 manual for the word "WildCards" For details
;                  $i_Flag = determines whether to return file or folders or both
;                       $i_Flag=0(Default) Return both files and folders
;                      $i_Flag=1 Return files Only
;                       $i_Flag=2 Return Folders Only
;                   $i_Recurse = Indicate whether recursion to subfolders required
;                       $i_Recurse=0(Default) No recursion to subfolders
;                      $i_Recurse=1 recursion to subfolders
;                   $i_BaseDir = Indicate whether base directory name included in returned elements
;                       $i_BaseDir=0 base directory name not included
;                      $i_BaseDir=1 (Default) base directory name included
;                   $s_Exclude= The Exclude filter to use.  "WildCards" For details
;
; Requirement(s):   None
; Return Value(s):  On Success - Returns an array containing the list of files and folders in the specified path
;                       On Failure - Returns the an empty string "" if no files are found and sets @Error on errors
;                       @Error=1 Path not found or invalid
;                       @Error=2 Invalid $s_Filter
;                      @Error=3 Invalid $i_Flag
;                @Error=4 No File(s) Found
;
; Author(s):        randallc <randallc@ozemail.com.au>; modified from SolidSnake and big_daddy and SmoKE_N and GEOsoft!
; Note(s):          The array returned is one-dimensional and is made up as follows:
;                   $array[0] = Number of Files\Folders returned
;                   $array[1] = 1st File\Folder
;                   $array[2] = 2nd File\Folder
;                   $array[3] = 3rd File\Folder
;                   $array[n] = nth File\Folder
;
;===============================================================================
Func _FileListToArray3($sPath, $sFilter = "*", $iFlag = 0, $iRecurse = 0, $iBaseDir = 1, $sExclude = ""); ** still need to use RegExp to eliminate dupes? ***
    If $sFilter = -1 Then $sFilter = "*"
    If StringRight($sPath, 1) == "\" Then $sPath = StringTrimRight($sPath, 1)
    Local $hSearch, $sFile, $sFileString, $asList[1], $sep = "|", $sFileString1, $sFilter1 = $sFilter
    If Not FileExists($sPath) Then Return SetError(1, 1, "")
    If (StringInStr($sFilter, "\")) Or (StringInStr($sFilter, "/")) Or (StringInStr($sFilter, ":")) Or (StringInStr($sFilter, ">")) Or (StringInStr($sFilter, "<")) Or (StringStripWS($sFilter, 8) = "") Then Return SetError(2, 2, "")
    If Not ($iFlag = 0 Or $iFlag = 1 Or $iFlag = 2) Then Return SetError(3, 3, "")
    $sFilter = StringReplace("*" & $sFilter & "*", "**", "*")
    If Not StringInStr($sFilter, ';') And Not StringInStr($sFilter, '|') Then $sFilter &= "|"
    If StringInStr($sFilter, ';') Then $sep = ";";$sFilter &= ';'
    Local $aSplit = StringSplit(StringStripWS($sFilter, 8), $sep), $sRead, $sHoldSplit, $arFolders[2] = [ $sPath, ""]
    $cw = ConsoleWrite("UBound($aSplit) =" & UBound($aSplit) & @LF)
    If $sExclude <> "" Then $sExclude = "(?i)" & StringReplace(StringReplace(StringReplace($sExclude, ".", "\."), "*", ".*"), "?", ".");change the filters to RegExp filters
    If $iRecurse Then;$cw = ConsoleWrite("UBound($aSplit) =" & UBound($aSplit) & @LF)
        If $iFlag = 2 Then _FileListToArrayFolders($sPath, $sFileString1, "*", $iRecurse, $sExclude)
        If $iFlag <> 2 Then _FileListToArrayFolders($sPath, $sFileString1, "*", $iRecurse, "")
        Local $arFolders = StringSplit(StringTrimRight($sFileString1, 1), "*")
        $arFolders[0] = $sPath
    EndIf
    For $iCF = 0 To UBound($arFolders) - 1; $cw = ConsoleWrite("$iCF=" & $iCF & " $arFolders[$iCF]  =" & @LF & $arFolders[$iCF] & @LF)
        If StringStripWS($arFolders[$iCF], 8) = '' Then ContinueLoop
        For $iCC = 1 To UBound($aSplit) - 1
            If StringStripWS($aSplit[$iCC], 8) = '' Then ContinueLoop
            If StringLeft($aSplit[$iCC], 1) == "." Then $aSplit[$iCC] = "*" & $aSplit[$iCC];, "**", "*")
            Select; options for not recursing; quicker than filtering after for single directory
                Case Not $iRecurse And Not $iFlag And Not $iBaseDir; fastest, with files and folders, not recursed
                    _FileListToArrayBrief2($arFolders[$iCF], $sFileString, $aSplit[$iCC], $sExclude)
                Case Not $iFlag; not $iRecurse and  And $iBaseDir;fast, with files and folders, not recursed
                    _FileListToArrayBrief1($arFolders[$iCF], $sFileString, $aSplit[$iCC], $sExclude)
                Case $iFlag = 1;fast, with files only,  not recursed
                    _FileListToArrayFiles($arFolders[$iCF], $sFileString, $aSplit[$iCC], $sExclude)
                Case Not $iRecurse And $iFlag = 2; folders only , not recursed
                    _FileListToArrayFolders($arFolders[$iCF], $sFileString, $aSplit[$iCC], $iRecurse, $sExclude)
            EndSelect;$cw = ConsoleWrite("$iCC=" & $iCC & " $sFileString    =" & @LF & $sFileString & @LF)
            If $iCF = 0 Then $sHoldSplit &= '|' & $aSplit[$iCC]; $cw = ConsoleWrite("$iCC=" & $iCC & " $sFileString =" & @LF & $sFileString & @LF)
        Next
        If $iCF = 0 Then $sFilter = StringReplace(StringTrimLeft($sHoldSplit, 1), "**", "*");,$cw = ConsoleWrite("$iCC=" & $iCC & " $sFilter    =" & @LF & $sFilter & @LF)
    Next
    If $iRecurse And $iFlag = 2 And $sFilter <> "*" And $sFilter <> "*.*" Then; filter folders -------------------
        $sFileString1 = StringTrimRight(StringReplace($sFileString1, "*", @CRLF), 1)
        $sFilter1 = StringReplace(StringReplace(StringReplace($sFilter1, ".", "\."), "*", ".*"), "?", ".");change the filters to RegExp filters
        Local $pattern = '(?m)(^(?i)' & $sFilter1 & '$)', $cw = ConsoleWrite("$sFilter  =" & @LF & $sFilter1 & @LF), $cw = ConsoleWrite("$pattern   =" & @LF & $pattern & @LF)
        Local $asList = StringRegExp($sFileString1, $pattern, 3)
        If (Not $iBaseDir) Then
            $sFileString1 = _ArrayToString($asList, "*")
            $sFileString1 = StringReplace($sFileString1, $sPath & "\", "", 0, 2)
            $asList = StringSplit($sFileString1, "*")
        EndIf
    ElseIf $iRecurse And $iFlag = 2 Then
        $sFileString = $sFileString1
    EndIf;If UBound($asList) > 1 Then ConsoleWrite("$asList[1]   =" & @LF & $asList[1] & @LF)
    If IsArray($asList) And UBound($asList) > 1 And $asList[0] <> "" Then Return $asList
    If (Not $iBaseDir) Or (Not $iRecurse And Not $iFlag And Not $iBaseDir) Then $sFileString = StringReplace($sFileString, $sPath & "\", "", 0, 2)
    $arReturn = StringSplit(StringTrimRight($sFileString, 1), "*");~    local $a=ConsoleWrite("$sFileString :"&@lf&StringReplace($sFileString,"|",@crlf)&@lf),$timerstamp1=TimerInit()
    If IsArray($arReturn) And UBound($arReturn) > 1 And $arReturn[1] <> "" And Not (UBound($aSplit) = 3 And $aSplit[2] == "") Then _deleteduplicate1($arReturn);and  $arFolders[1]<>""
    Return $arReturn;~  Return StringSplit(StringTrimRight($sFileString, 1), "*")
EndFunc  ;==>_FileListToArray3
;===============================================================================
;
; Description:    _deleteduplicate1; deletes duplicates in an Array 1D [could be done faster with vbs func]
; Syntax:          _deleteduplicate1(ByRef $ar_Array)
; Parameter(s):     $ar_Array = 1d Array
; Requirement(s):   None
; Return Value(s):  On Success - Returns asorted array with no duplicates
;                       On Failure -
;                       @Error=1 P
;                       @Error=2
;
; Author(s):        randallc
;===============================================================================
Func _deleteduplicate1(ByRef $ar_Array)
    Local $ar_New[1], $timerstamp1 = TimerInit(), $s_New
    _ArrayDelete($ar_Array, 0)
    ConsoleWrite("UBound($ar_Array) =" & UBound($ar_Array) & @LF)
    _ArraySort($ar_Array)
    Local $count = UBound($ar_Array) - 1, $a = ConsoleWrite("_ArraySort :" & Round(TimerDiff($timerstamp1)) & " mseconds " & @LF), $timerstamp1 = TimerInit()
    For $x = $count - 1 To 0 Step - 1
        $Itemtxt1 = $ar_Array[ $x]
        Do
            If $x > 0 Then
                $Itemtxt2 = $ar_Array[ $x - 1]
                If StringUpper($Itemtxt1) == StringUpper($Itemtxt2) Then
                    $count -= 1
                    $x -= 1
                EndIf
            EndIf
        Until StringUpper($Itemtxt1) <> StringUpper($Itemtxt2) Or $x = 0
        $s_New &= $Itemtxt1 & "|"
    Next
    $ar_Array = StringSplit($s_New, "|")
    Local $a = ConsoleWrite("_ArrayAdd :" & Round(TimerDiff($timerstamp1)) & " mseconds " & @LF), $timerstamp1 = TimerInit()
    If $ar_Array [UBound($ar_Array) - 1] == "" Then _ArrayDelete($ar_Array, UBound($ar_Array) - 1)
    _ArrayReverse($ar_Array, 1)
    If $ar_Array [UBound($ar_Array) - 1] == "" Then _ArrayDelete($ar_Array, UBound($ar_Array) - 1)
    ConsoleWrite("_ArrayReverse :" & Round(TimerDiff($timerstamp1)) & " mseconds " & @LF)
    Return 1
EndFunc  ;==>_deleteduplicate1
;===============================================================================
;
; Description:    Helper  self-calling func for  _FileListToArray wrapper; lists all  folders in a specified path
; Syntax:          _FileListToArrayFolders($s_PathF, ByRef $s_FileStringF, $s_FilterF,  $i_RecurseF)
; Parameter(s):     $s_PathF = Path to generate filelist for
;                   $s_FileStringF = The string for lists all folders only in a specified path
;                   $s_FilterF = The filter to use. Search the Autoit3 manual for the word "WildCards" For details
;                   $i_RecurseF = Indicate whether recursion to subfolders required
;                       $i_RecurseF=0(Default) No recursion to subfolders
;                      $i_RecurseF=1 recursion to subfolders
;                   $sExcludeF= The Exclude filter to use.  "WildCards" For details
; Requirement(s):   None
; Return Value(s):  On Success - Returns an array containing the list of files and folders in the specified path
;                       On Failure - Returns the an empty string "" if no files are found and sets @Error on errors
;                       @Error=1 Path not found or invalid
;                       @Error=2 Invalid $s_Filter
;                      @Error=3 Invalid $i_Flag
;                @Error=4 No File(s) Found
;
; Author(s):        randallc; modified from SolidSnake, SmoKe_N, GEOsoft and big_daddy
;===============================================================================
Func _FileListToArrayFolders($sPathF, ByRef $sFileStringF, $sFilterF, $iRecurseF, $sExcludeF = "")
    Local $hSearch = FileFindFirstFile($sPathF & "\" & $sFilterF), $sPathF2
    If $hSearch = -1 Then Return SetError(4, 4, "")
    If $sExcludeF == "" Then
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF
            If StringInStr(FileGetAttrib($sPathF2), "D") Then;directories only wanted; and  the attrib shows is  directory
                $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter
                If $iRecurseF = 1 Then _FileListToArrayFolders($sPathF2, $sFileStringF, $sFilterF, $iRecurseF)
            EndIf
        WEnd
    Else
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF; if folders only and this pattern matches exclude pattern, no further list or subdir
            If StringRegExp($sPathF2, $sExcludeF) Then ContinueLoop
            If StringInStr(FileGetAttrib($sPathF2), "D") Then;directories only wanted; and  the attrib shows is  directory
                $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter with * as delimiter
                If $iRecurseF = 1 Then _FileListToArrayFolders($sPathF2, $sFileStringF, $sFilterF, $iRecurseF, $sExcludeF)
            EndIf
        WEnd
    EndIf
    FileClose($hSearch)
EndFunc  ;==>_FileListToArrayFolders
;===============================================================================
;
; Description:    Helper  func for  _FileListToArray wrapper; lists all files and folders in a specified path
; Syntax:          _FileListToArrayFiles($s_PathF, ByRef $s_FileStringF, $s_FilterF);quick as not recursive
; Parameter(s):     $s_PathF = Path to generate filelist for
;                   $s_FileStringF = The string for lists all files and folders in a specified path
;                   $s_FilterF = The filter to use. Search the Autoit3 manual for the word "WildCards" For details
;                   $sExcludeF= The Exclude filter to use.  "WildCards" For details
; Requirement(s):   None
; Return Value(s):  On Success - Returns an array containing the list of files and folders in the specified path
;                       On Failure - Returns the an empty string "" if no files are found and sets @Error on errors
;                       @Error=1 Path not found or invalid
;                       @Error=2 Invalid $s_Filter
;                @Error=4 No File(s) Found
;
; Author(s):        randallc; modified from SolidSnake, SmoKe_N, GEOsoft and big_daddy
;===============================================================================
Func _FileListToArrayFiles($sPathF, ByRef $sFileStringF, $sFilterF, $sExcludeF = "")
    Local $hSearch = FileFindFirstFile($sPathF & "\" & $sFilterF), $sPathF2
    If $hSearch = -1 Then Return SetError(4, 4, "")
    If $sExcludeF == "" Then
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF;directories not wanted; and  the attrib shows not  directory
            If Not StringInStr(FileGetAttrib($sPathF2), "D") Then $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter
        WEnd
    Else
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF;directories not wanted; and  the attrib shows not  directory; and filename [only]  does not match exclude
            If Not StringInStr(FileGetAttrib($sPathF2), "D") _
                    And Not StringRegExp($sFileF, $sExcludeF) Then $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter
        WEnd
    EndIf
    FileClose($hSearch)
EndFunc  ;==>_FileListToArrayFiles
;===============================================================================
;
; Description:    Helper  self-calling func for  _FileListToArray wrapper; lists all files and folders in a specified path
; Syntax:          _FileListToArrayRecFiles($s_PathF, ByRef $s_FileStringF, $s_FilterF); recursive
; Parameter(s):     $s_PathF = Path to generate filelist for
;                   $s_FileStringF = The string for lists all files and folders in a specified path
;                   $s_FilterF = The filter to use. Search the Autoit3 manual for the word "WildCards" For details
;                   $sExcludeF= The Exclude filter to use.  "WildCards" For details
; Requirement(s):   None
; Return Value(s):  On Success - Returns an array containing the list of files and folders in the specified path
;                       On Failure - Returns the an empty string "" if no files are found and sets @Error on errors
;                       @Error=1 Path not found or invalid
;                       @Error=2 Invalid $s_Filter
;                @Error=4 No File(s) Found
;
; Author(s):        randallc; modified from SolidSnake, SmoKe_N, GEOsoft and big_daddy
;===============================================================================
Func _FileListToArrayRecAll($sPathF, ByRef $sFileStringF, $sFilterF, $sExcludeF = "")
    Local $hSearch = FileFindFirstFile($sPathF & "\" & $sFilterF), $sPathF2
    If $hSearch = -1 Then Return SetError(4, 4, "")
    If $sExcludeF == "" Then
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF
            $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter
            If StringInStr(FileGetAttrib($sPathF2), "D") Then _FileListToArrayRecAll($sPathF2, $sFileStringF, $sFilterF);, $iFlagF, $iRecurseF)
        WEnd
    Else
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF
            If StringInStr(FileGetAttrib($sPathF2), "D") Then
                $sFileStringF &= $sPathF2 & "*";this writes the directoryname
                _FileListToArrayRecAll($sPathF2, $sFileStringF, $sFilterF, $sExcludeF);, $iFlagF, $iRecurseF)
            Else;if not directory, check Exclude match
                If Not StringRegExp($sFileF, $sExcludeF) Then $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter
            EndIf
        WEnd
    EndIf
    FileClose($hSearch)
EndFunc  ;==>_FileListToArrayRecAll
;===============================================================================
;
; Description:    Helper  self-calling func for  _FileListToArray wrapper; lists all files  in a specified path
; Syntax:          _FileListToArrayRecFiles($s_PathF, ByRef $s_FileStringF, $s_FilterF); recursive
; Parameter(s):     $s_PathF = Path to generate filelist for
;                   $s_FileStringF = The string for lists all files and folders in a specified path
;                   $s_FilterF = The filter to use. Search the Autoit3 manual for the word "WildCards" For details
;                   $sExcludeF= The Exclude filter to use.  "WildCards" For details
; Requirement(s):   None
; Return Value(s):  On Success - Returns an array containing the list of files and folders in the specified path
;                       On Failure - Returns the an empty string "" if no files are found and sets @Error on errors
;                       @Error=1 Path not found or invalid
;                       @Error=2 Invalid $s_Filter
;                @Error=4 No File(s) Found
;
; Author(s):        randallc; modified from SolidSnake, SmoKe_N, GEOsoft and big_daddy
;===============================================================================
Func _FileListToArrayRecFiles($sPathF, ByRef $sFileStringF, $sFilterF, $sExcludeF = "")
    Local $hSearch = FileFindFirstFile($sPathF & "\" & $sFilterF), $sPathF2
    If $hSearch = -1 Then Return SetError(4, 4, "")
    If $sExcludeF == "" Then
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF
            If StringInStr(FileGetAttrib($sPathF2), "D") Then
                _FileListToArrayRecFiles($sPathF2, $sFileStringF, $sFilterF);, $iFlagF, $iRecurseF)
            Else
                $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter
            EndIf
        WEnd
    Else
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sPathF2 = $sPathF & "\" & $sFileF
            If StringInStr(FileGetAttrib($sPathF2), "D") Then
                _FileListToArrayRecFiles($sPathF2, $sFileStringF, $sFilterF, $sExcludeF);, $iFlagF, $iRecurseF)
            Else
                If Not StringRegExp($sFileF, $sExcludeF) Then $sFileStringF &= $sPathF2 & "*";this writes the filename to the delimited string with * as delimiter
            EndIf
        WEnd
    EndIf
    FileClose($hSearch)
EndFunc  ;==>_FileListToArrayRecFiles
;===============================================================================
;
; Description:    Helper  func for  _FileListToArray wrapper; lists all files ONLY in a specified path
; Syntax:          _FileListToArrayBrief2($s_PathF, ByRef $s_FileStringF, $s_FilterF);quick as not recursive
; Parameter(s):     $s_PathF = Path to generate filelist for
;                   $s_FileStringF = The string for lists all files and folders in a specified path
;                   $s_FilterF = The filter to use. Search the Autoit3 manual for the word "WildCards" For details
;                   $sExcludeF= The Exclude filter to use.  "WildCards" For details
; Requirement(s):   None
; Return Value(s):  On Success - Returns an array containing the list of files and folders in the specified path
;                       On Failure - Returns the an empty string "" if no files are found and sets @Error on errors
;                       @Error=1 Path not found or invalid
;                       @Error=2 Invalid $s_Filter
;                @Error=4 No File(s) Found
;
; Author(s):        randallc; modified from SolidSnake, SmoKe_N, GEOsoft and big_daddy
;===============================================================================
Func _FileListToArrayBrief2($sPathF, ByRef $sFileStringF, $sFilterF, $sExcludeF = "")
    $hSearch = FileFindFirstFile($sPathF & "\" & $sFilterF)
    If $hSearch = -1 Then Return SetError(4, 4, "")
    If $sExcludeF == "" Then
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sFileStringF &= $sFileF & "*";this writes the filename to the delimited string with * as delimiter; only time no full path included
        WEnd
    Else
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf;If not StringRegExp($sFileF,$sExcludeF) then $sFileStringF &= $sPathF2 & "*"
            If Not StringRegExp($sFileF, $sExcludeF) Then $sFileStringF &= $sFileF & "*";this writes the filename to the delimited string with * as delimiter; only time no full path included
        WEnd
    EndIf
    FileClose($hSearch)
EndFunc  ;==>_FileListToArrayBrief2
;===============================================================================
;
; Description:    Helper  func for  _FileListToArray wrapper; lists all files and folders in a specified path
; Syntax:          _FileListToArrayBrief1($s_PathF, ByRef $s_FileStringF, $s_FilterF);quick as not recursive
; Parameter(s):     $s_PathF = Path to generate filelist for
;                   $s_FileStringF = The string for lists all files and folders in a specified path
;                   $s_FilterF = The filter to use. Search the Autoit3 manual for the word "WildCards" For details
;                   $sExcludeF= The Exclude filter to use.  "WildCards" For details
; Requirement(s):   None
; Return Value(s):  On Success - Returns an array containing the list of files and folders in the specified path
;                       On Failure - Returns the an empty string "" if no files are found and sets @Error on errors
;                       @Error=1 Path not found or invalid
;                       @Error=2 Invalid $s_Filter
;                @Error=4 No File(s) Found
;
; Author(s):        randallc; modified from SolidSnake, SmoKe_N, GEOsoft and big_daddy
;===============================================================================
Func _FileListToArrayBrief1($sPathF, ByRef $sFileStringF, $sFilterF, $sExcludeF = "")
    $hSearch = FileFindFirstFile($sPathF & "\" & $sFilterF)
    If $hSearch = -1 Then Return SetError(4, 4, "")
    If $sExcludeF == "" Then
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            $sFileStringF &= $sPathF & "\" & $sFileF & "*";this writes the filename to the delimited string with * as delimiter [remo]
        WEnd
    Else
        While 1
            $sFileF = FileFindNextFile($hSearch)
            If @error Then
                SetError(0)
                ExitLoop
            EndIf
            If Not StringRegExp($sFileF, $sExcludeF) Then $sFileStringF &= $sPathF & "\" & $sFileF & "*";this writes the filename to the delimited string with * as delimiter [remo]
        WEnd
    EndIf
    FileClose($hSearch)
EndFunc  ;==>_FileListToArrayBrief1

Share this post


Link to post
Share on other sites



Hello Everybody:

The problem is to do with using a global variable, $j1, in a for/next loop.

From the help file

The Variable will be created automatically with a LOCAL scope, even when MustDeclareVars is on.

So the solution is to pass the loop varaible to your double click function like this

ListView_DoubleClick ($j1)    
           

Func ListView_DoubleClick($ll)
    local $indiceselect
   ;----------------------------------------------------------------------------------------------
    If $DebugIt Then    _DebugPrint ("$NM_DBLCLK")
   ;----------------------------------------------------------------------------------------------
    $indiceselect =  _GUICtrlListViewGetSelectedIndices($av_ListViews[$ll])
    MsgBox(0,"Double Clicked", _GUICtrlListViewGetItemText($av_ListViews[$ll], $indiceselect) )
EndFunc  ;==>ListView_DoubleClick

Serial port communications UDF Includes functions for binary transmission and reception.printing UDF Useful for graphs, forms, labels, reports etc.Add User Call Tips to SciTE for functions in UDFs not included with AutoIt and for your own scripts.Functions with parameters in OnEvent mode and for Hot Keys One function replaces GuiSetOnEvent, GuiCtrlSetOnEvent and HotKeySet.UDF IsConnected2 for notification of status of connected state of many urls or IPs, without slowing the script.

Share this post


Link to post
Share on other sites

Hi Martin:

Thanks a million for finding the problem, I learned how to pass the variable from a loop to a function, even if it is global declared.

Now, my program works perfectly.

Again thanks for your help.

Rudolph.

The problem is to do with using a global variable, $j1, in a for/next loop.

From the help file

So the solution is to pass the loop varaible to your double click function like this

ListView_DoubleClick ($j1)    
           

Func ListView_DoubleClick($ll)
    local $indiceselect
   ;----------------------------------------------------------------------------------------------
    If $DebugIt Then    _DebugPrint ("$NM_DBLCLK")
   ;----------------------------------------------------------------------------------------------
    $indiceselect =  _GUICtrlListViewGetSelectedIndices($av_ListViews[$ll])
    MsgBox(0,"Double Clicked", _GUICtrlListViewGetItemText($av_ListViews[$ll], $indiceselect) )
EndFunc  ;==>ListView_DoubleClick

Share this post


Link to post
Share on other sites

Hi Martin:

Thanks a million for finding the problem, I learned how to pass the variable from a loop to a function, even if it is global declared.

Now, my program works perfectly.

Again thanks for your help.

Rudolph.

Not a problem, pleased I could help.

I see that the post I answered was your first so welcome to the forum. That was a very good first post.


Serial port communications UDF Includes functions for binary transmission and reception.printing UDF Useful for graphs, forms, labels, reports etc.Add User Call Tips to SciTE for functions in UDFs not included with AutoIt and for your own scripts.Functions with parameters in OnEvent mode and for Hot Keys One function replaces GuiSetOnEvent, GuiCtrlSetOnEvent and HotKeySet.UDF IsConnected2 for notification of status of connected state of many urls or IPs, without slowing the script.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0