Ibrahim Posted October 31, 2007 Share Posted October 31, 2007 what if i want to create a GUI with a button that when i press create new tab and so on and when i exit it keeps the tabs when i open it again [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
smashly Posted October 31, 2007 Share Posted October 31, 2007 Hi, Nothing like IE7 tabs, but it does have an "Add Tab" which adds a new tab when clicked . Saves any tabs that have been added when exited and loads them when it's run again. Also opens at the last tab that was exited at. Needs Beta to run as it's using the tab udf functions from v3.2.9.4 There's definitely a better way than this to do it.. but my time for learning curve is short atm.expandcollapse popup#include <GUIConstants.au3> #include <GuiTab.au3> Opt("GUIOnEventMode", 1) Global $Ini = @ScriptDir & "\tab.ini" $Gui = GUICreate(":-)", 300, 100) $Tab = GUICtrlCreateTab(5, 5, 290, 90) GUISetOnEvent($GUI_EVENT_CLOSE, "Close", $Gui) GUISetState() Load() GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") While 1 Sleep(100) WEnd Func Load() If FileExists($Ini) And IniRead($Ini, "TABS", "Count", "") > 0 Then Dim $IRS = IniReadSection($Ini, "NAMES") For $i = 1 To IniRead($Ini, "TABS", "Count", "") GUICtrlCreateTabItem($IRS[$i][1]) Next _GUICtrlTab_SetCurSel($Tab, Int(IniRead($Ini, "TABS", "Selected", ""))) Else GUICtrlCreateTabItem("Add Tab") EndIf EndFunc Func WM_NOTIFY($hWnd, $Msg) Dim $GGCI = GUIGetCursorInfo($Gui) Dim $TH = _GUICtrlTab_HitTest($Tab, $GGCI[0] - 6, $GGCI[1] - 6) If IsArray($GGCI) And $GGCI[4] <> 0 And $TH[0] = 0 Then GUISetState(@SW_DISABLE, $Gui) Local $Inp = InputBox("New Tab Name", "Enter a name for the new tab", "", "", 200, 140, -1, -1) If Not @error And $Inp <> "" Then GUICtrlCreateTabItem($Inp) _GUICtrlTab_SetCurSel($Tab, _GUICtrlTab_GetItemCount($Tab) - 1) EndIf GUISetState(@SW_ENABLE, $Gui) Return EndIf Return $GUI_RUNDEFMSG EndFunc Func Close() IniWrite($Ini, "TABS", "Count", _GUICtrlTab_GetItemCount($Tab)) IniWrite($Ini, "TABS", "Selected", _GUICtrlTab_GetCurSel($Tab)) For $i = 1 To _GUICtrlTab_GetItemCount($Tab) IniWrite($Ini, "NAMES", "Tab" & $i,_GUICtrlTab_GetItemText($Tab, $i - 1)) Next Exit EndFuncCheers Link to comment Share on other sites More sharing options...
Ibrahim Posted November 1, 2007 Author Share Posted November 1, 2007 thanks man,I'll give it a try,Thanks again [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
Ibrahim Posted November 1, 2007 Author Share Posted November 1, 2007 (edited) although I updated my autoit to the beta,when i run the script it's full of undefined functions and undeclared variables >Running AU3Check (1.54.9.0) from:d:\Program Files\AutoIt3 C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3(15,26) : WARNING: $WM_NOTIFY: possibly used before declaration. GUIRegisterMsg($WM_NOTIFY, ~~~~~~~~~~~~~~~~~~~~~~~~~^ C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3(15,26) : ERROR: $WM_NOTIFY: undeclared global variable. GUIRegisterMsg($WM_NOTIFY, ~~~~~~~~~~~~~~~~~~~~~~~~~^ C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3(27,79) : ERROR: _GUICtrlTab_SetCurSel(): undefined function. _GUICtrlTab_SetCurSel($Tab, Int(IniRead($Ini, "TABS", "Selected", ""))) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3(35,67) : ERROR: _GUICtrlTab_HitTest(): undefined function. Dim $TH = _GUICtrlTab_HitTest($Tab, $GGCI[0] - 6, $GGCI[1] - 6) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3(41,70) : ERROR: _GUICtrlTab_GetItemCount(): undefined function. _GUICtrlTab_SetCurSel($Tab, _GUICtrlTab_GetItemCount($Tab) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3(51,66) : ERROR: _GUICtrlTab_GetCurSel(): undefined function. IniWrite($Ini, "TABS", "Selected", _GUICtrlTab_GetCurSel($Tab) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3(53,80) : ERROR: _GUICtrlTab_GetItemText(): undefined function. IniWrite($Ini, "NAMES", "Tab" & $i,_GUICtrlTab_GetItemText($Tab, $i - 1) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ C:\Documents and Settings\Family\Desktop\101030\New AutoIt v3 Script.au3 - 6 error(s), 1 warning(s) !>05:31:06 AU3Check ended.rc:2 +>05:31:07 AutoIt3Wrapper Finished >Exit code: 0 Time: 2.084 Sorry installation problem------------>Working fine now, thanks again cour i ask u to replace the new tab control with a button and when the new tab created can contain Listview control and some buttons and ofcourse a larger GUI,I'm not leaving all the work to u Edited November 1, 2007 by Ibrahim [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
smashly Posted November 1, 2007 Share Posted November 1, 2007 Hi, Can do it all How about instead of a button to add a new tab , use right click on any tab and have a context menu with the option to "Add New Tab" , "Rename Tab" , "Delete Tab" ? Cheers Link to comment Share on other sites More sharing options...
Ibrahim Posted November 1, 2007 Author Share Posted November 1, 2007 I have Just Done it, thanks you Much man,I'm following the pidgin converstaion tabs so nice. Thanks for ur help man [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
Ibrahim Posted November 1, 2007 Author Share Posted November 1, 2007 one last thing before closing this issue can u show me how to load an array into a combo box??????? [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
smashly Posted November 1, 2007 Share Posted November 1, 2007 Hi, here you go it's a directory launcher example, It loads the folder paths of your @HomeDrive into an array then returns the array as a "|" delimited string. Select a directory from the combo list and it opens with ShellExecute ..#include <GUIConstants.au3> #include <File.au3> Opt("GUIOnEventMode", 1) $Gui = GUICreate("Directory Launcher :-)", 250, 40, -1, -1, -1, $WS_EX_TOPMOST) $Combo = GUICtrlCreateCombo("", 5, 10, 240, 20, $CBS_DROPDOWNLIST) GUICtrlSetData(-1, _SetComboData(), "Select a directory...") GUICtrlSetOnEvent(-1, "Event") GUISetOnEvent($GUI_EVENT_CLOSE, "Event", $Gui) GUISetState() While 1 Sleep(100) WEnd Func Event() Local $cID = @GUI_CtrlId Switch $cID Case $GUI_EVENT_CLOSE Exit Case $Combo If FileExists(GUICtrlRead($Combo)) Then ShellExecute(GUICtrlRead($Combo)) EndSwitch EndFunc Func _SetComboData() Dim $FL2A = _FileListToArray(@HomeDrive, "*", 2) If Not @error Then Local $sTemp For $i = 1 To $FL2A[0] $sTemp &= @HomeDrive & "\" & $FL2A[$i] & "|" Next Return "Select a directory..." & "|" & StringTrimRight($sTemp, 1) EndIf EndFunc Link to comment Share on other sites More sharing options...
Ibrahim Posted November 2, 2007 Author Share Posted November 2, 2007 already did that,but got so many errors,which i think have something to do with the length of the arraywhat i'm gonna give u is a big script,simple though,loads the ini files which starts with the _ character and edit and add the keys and sections take a look at its errors (((((((hope it's not exhausting,gonna need u later !!!!))))))))))Turk.rar [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
Ibrahim Posted November 2, 2007 Author Share Posted November 2, 2007 (edited) Edited that-------> expandcollapse popup#Region;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_icon=G:\Administrator\icons\vistaicons\vistaicons\imageres.46.ico #AutoIt3Wrapper_outfile=save.exe #AutoIt3Wrapper_Res_Description=Application By Ibrahim Ghorabah #AutoIt3Wrapper_Res_Fileversion=3.1.0.0 #AutoIt3Wrapper_Res_LegalCopyright=This Is Ibrahim Ghorabah Program #AutoIt3Wrapper_Res_Language=1033 #EndRegion;**** Directives created by AutoIt3Wrapper_GUI **** #include <GuiConstants.au3> #include <GuiListView.au3> #include <File.au3> #include <Array.au3> ;~ Opt("GUIOnEventMode", 1) $Types = FileReadLine("temp.dat") FileDelete("temp.dat") $guiwidth = @DesktopWidth - 100 $guiheight = @DesktopHeight - 300 Opt('MustDeclareVars', 0) Dim $listview, $btn_save, $btn_delete, $Btn_Exit, $msg, $Status, $ret, $count, $myini, $btn_add, $item, $initem, $no, $nooflines, $text, $edit, $btn_edit, $save, $listviewheight = @DesktopHeight - 600, $listviewwidth = @DesktopWidth - 200, $save_edit, $cancel_edit Global $labe_edit[10], $Input[10], $text[10], $Type[20], $Types GUICreate("المخزن", $guiwidth, $guiheight) ;~ GUICtrlCreatePic("Ets.JPG",40,$listviewheight+80,137,162,$SS_SUNKEN) ;~ GUICtrlCreatePic("mobi.JPG",180,$listviewheight+80,183,86,$SS_SUNKEN) $listview = GUICtrlCreateListView("فئة|عدد(باكو)|س.شراء|س.بيع|أحر تعديل", 40, 30, $listviewwidth, $listviewheight) GUICtrlSendMsg($listview, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES) $ListType = GUICtrlCreateCombo("", 10, 1, 150, 20) GUICtrlSetData($ListType, _SetComboData(), "Select a directory...") GUICtrlSetOnEvent(-1, "Event") $btn_save = GUICtrlCreateButton("&Save", 10, $guiheight - 40, 50, 30) $btn_delete = GUICtrlCreateButton("&Delete", 80, $guiheight - 40, 50, 30) $btn_add = GUICtrlCreateButton("&Add", 150, $guiheight - 40, 50, 30) $Btn_Exit = GUICtrlCreateButton("Exit", 220, $guiheight - 40, 50, 30) $Status = GUICtrlCreateLabel("", 290, $guiheight - 40, 50, 20, BitOR($SS_SUNKEN, $SS_CENTER)) $btn_edit = GUICtrlCreateButton("&Edit", 360, $guiheight - 40, 50, 30) $btn_edit = GUICtrlCreateButton("&Edit", 360, $guiheight - 40, 50, 30) $btn_LoadType = GUICtrlCreateButton("Load", 170, 1, 150, 20) $btn_addtype = GUICtrlCreateButton("Add New", 330, 1, 150, 20) GUISetState() While 1 $msg = GUIGetMsg() $myini = "_" & GUICtrlRead($ListType) & ".ini" Select Case $msg = $GUI_EVENT_CLOSE Or $msg = $Btn_Exit $save = MsgBox(36, "save settings", "you wanna save settings?") If $save = 6 Then save() ExitLoop Case $msg = $btn_save save() Case $msg = $btn_delete _GUICtrlListViewDeleteItemsSelected($listview) _GUICtrlListView_SetItemSelected ($listview, 0, True) Case $msg = $btn_add add() Case $msg = $btn_edit edit() Case $msg = $btn_addtype addType() Case $msg = $btn_LoadType load() EndSelect WEnd GUIDelete() ;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;; Func save() $count = _GUICtrlListViewGetItemCount($listview) FileDelete($myini) For $noofitems = 0 To $count - 1 $section = _GUICtrlListViewGetItemText($listview, $noofitems, 0) $quantity = _GUICtrlListViewGetItemText($listview, $noofitems, 1) $Buy = _GUICtrlListViewGetItemText($listview, $noofitems, 2) $Sell = _GUICtrlListViewGetItemText($listview, $noofitems, 3) $LastEdit = _GUICtrlListViewGetItemText($listview, $noofitems, 4) GUICtrlSetData($Status, "") IniWrite($myini, $section, "Quantity", $quantity) IniWrite($myini, $section, "Buy", $Buy) IniWrite($myini, $section, "Sell", $Sell) IniWrite($myini, $section, "LastEdit", $LastEdit) Next MsgBox(0, "MyIni", "Your state is saved") EndFunc;==>save ;;;;;;;;;;;;;;;;;;;;;;;;;;; Func load() _GUICtrlListView_DeleteAllItems ($listview) $SectNames = IniReadSectionNames($myini) If $SectNames <> "" Then For $i = 1 To $SectNames [0] $quantity = IniRead($myini, $SectNames [$i], "Quantity", "0") $Buy = IniRead($myini, $SectNames [$i], "Buy", "0") $Sell = IniRead($myini, $SectNames [$i], "Sell", "0") $LastEdit = IniRead($myini, $SectNames [$i], "LastEdit", "0") $initem = $SectNames [$i] & "|" & $quantity & "|" & $Buy & "|" & $Sell & "|" & $LastEdit GUICtrlCreateListViewItem($initem, $listview) Next EndIf EndFunc;==>load ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Func edit() $no = _GUICtrlListViewGetSelectedIndices($listview) $text[2] = _GUICtrlListViewGetItemText($listview, $no, 1) $text[3] = _GUICtrlListViewGetItemText($listview, $no, 2) $text[4] = _GUICtrlListViewGetItemText($listview, $no, 3) $text[5] = _GUICtrlListViewGetItemText($listview, $no, 4) opennew() While 1 $msg = GUIGetMsg() Select Case $msg = $cancel_edit remove() ExitLoop Case $msg = $save_edit _GUICtrlListViewSetItemText($listview, $no, 1, GUICtrlRead($Input[2])) _GUICtrlListViewSetItemText($listview, $no, 2, GUICtrlRead($Input[3])) _GUICtrlListViewSetItemText($listview, $no, 3, GUICtrlRead($Input[4])) _GUICtrlListViewSetItemText($listview, $no, 4, GUICtrlRead($Input[5])) remove() ExitLoop EndSelect WEnd EndFunc;==>edit Func remove() GUICtrlDelete($save_edit) GUICtrlDelete($cancel_edit) For $n = 1 To 5 Sleep(50) GUICtrlDelete($Input[$n]) GUICtrlDelete($labe_edit[$n]) Next EndFunc;==>remove Func add() opennew() While 1 $msg = GUIGetMsg() Select Case $msg = $cancel_edit remove() ExitLoop Case $msg = $save_edit $item = GUICtrlRead($Input[2]) & "|" & GUICtrlRead($Input[3]) & "|" & GUICtrlRead($Input[4]) & "|" & GUICtrlRead($Input[5]) & "|" & @MDAY & "/" & @MON & "/" & @YEAR _GUICtrlListViewInsertItem($listview, -1, $item) remove() ExitLoop EndSelect WEnd EndFunc;==>add Func addType() $labe_edit[1] = GUICtrlCreateLabel("النوع", 100, $listviewheight + 35) $Input[1] = GUICtrlCreateInput($text[1], 40, $listviewheight + 55, 150, 20) opennew() While 1 $msg = GUIGetMsg() Select Case $msg = $cancel_edit remove() ExitLoop Case $msg = $save_edit IniWrite("_" & GUICtrlRead($Input[1]) & ".ini", GUICtrlRead($Input[2]), "Quantity", GUICtrlRead($Input[3])) IniWrite("_" & GUICtrlRead($Input[1]) & ".ini", GUICtrlRead($Input[2]), "Buy", GUICtrlRead($Input[4])) IniWrite("_" & GUICtrlRead($Input[1]) & ".ini", GUICtrlRead($Input[2]), "Sell", GUICtrlRead($Input[5])) IniWrite("_" & GUICtrlRead($Input[1]) & ".ini", GUICtrlRead($Input[2]), "LastEdit", @MDAY & "/" & @MON & "/" & @YEAR) remove() ExitLoop EndSelect WEnd Sleep(50) $Types = FileReadLine("temp.dat") FileDelete("temp.dat") GUICtrlSetData($ListType, $Types) EndFunc;==>addType Func opennew() $labe_edit[2] = GUICtrlCreateLabel("الفئة", 235, $listviewheight + 35) $Input[2] = GUICtrlCreateInput($text[2], 210, $listviewheight + 55, 50, 20) Sleep(50) $labe_edit[3] = GUICtrlCreateLabel("ع.كروت", 285, $listviewheight + 35) $Input[3] = GUICtrlCreateInput($text[3], 270, $listviewheight + 55, 50, 20) Sleep(50) $labe_edit[4] = GUICtrlCreateLabel("س.شراء", 380, $listviewheight + 35) $Input[4] = GUICtrlCreateInput($text[4], 330, $listviewheight + 55, 100, 20) Sleep(50) $labe_edit[5] = GUICtrlCreateLabel("س.بيع", 500, $listviewheight + 35) $Input[5] = GUICtrlCreateInput($text[5], 440, $listviewheight + 55, 100, 20) Sleep(50) $save_edit = GUICtrlCreateButton("حفظ", 550, $listviewheight + 55, 50, 20) $cancel_edit = GUICtrlCreateButton("إلغاء", 610, $listviewheight + 55, 50, 20) EndFunc;==>opennew Func _SetComboData() Dim $FL2A = _FileListToArray(@ScriptDir, "_*.ini", 1) If Not @error Then Local $sTemp For $i = 1 To $FL2A[0] $FL2A[$i] = StringTrimLeft($FL2A[$i], 1) $FL2A[$i] = StringTrimRight($FL2A[$i], 4) $sTemp &= $FL2A[$i] & "|" Next Return "Select a directory..." & "|" & StringTrimRight($sTemp, 1) EndIf EndFunc;==>_SetComboData Func Event() Local $cID = @GUI_CtrlId Switch $cID Case $GUI_EVENT_CLOSE Exit Case $ListType If FileExists(GUICtrlRead("_"&$ListType&".ini")) Then load() EndSwitch EndFunc;==>Event Edited November 2, 2007 by Ibrahim [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
BrettF Posted November 2, 2007 Share Posted November 2, 2007 I'm not sure what else you need... Is there still a question? I fixed the load function that was giving me errors. ;;;;;;;;;;;;;;;;;;;;;;;;;;; Func load() _GUICtrlListView_DeleteAllItems ($listview) $SectNames = IniReadSectionNames($myini) If Not @error Then For $i = 1 To $SectNames [0] $quantity = IniRead($myini, $SectNames [$i], "Quantity", "0") $Buy = IniRead($myini, $SectNames [$i], "Buy", "0") $Sell = IniRead($myini, $SectNames [$i], "Sell", "0") $LastEdit = IniRead($myini, $SectNames [$i], "LastEdit", "0") $initem = $SectNames [$i] & "|" & $quantity & "|" & $Buy & "|" & $Sell & "|" & $LastEdit GUICtrlCreateListViewItem($initem, $listview) Next EndIf EndFunc ;==>load Vist my blog!UDFs: Opens The Default Mail Client | _LoginBox | Convert Reg to AU3 | BASS.au3 (BASS.dll) (Includes various BASS Libraries) | MultiLang.au3 (Multi-Language GUIs!)Example Scripts: Computer Info Telnet Server | "Secure" HTTP Server (Based on Manadar's Server)Software: AAMP- Advanced AutoIt Media Player | WorldCam | AYTU - Youtube Uploader Tutorials: Learning to Script with AutoIt V3Projects (Hardware + AutoIt): ArduinoUseful Links: AutoIt 1-2-3 | The AutoIt Downloads Section: | SciTE4AutoIt3 Full Version! Link to comment Share on other sites More sharing options...
Ibrahim Posted November 2, 2007 Author Share Posted November 2, 2007 1st, thanks for ur help,when u add new ur load function NOT WORKING [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
Ibrahim Posted November 4, 2007 Author Share Posted November 4, 2007 can anybody review the script and make sure it's error proooooof [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
Ibrahim Posted November 4, 2007 Author Share Posted November 4, 2007 AnyBody???? [font="Arial Black"]My Stuff[/font]UPnP Port Forwarding Final.GateWay InformationThe GateWay Watcher(detect speeofing)Rightclick Any file --->Hide/UnhideThe Tip WatcherA PanelShare WatcherThe Arp WatcherThe Online License Checker Link to comment Share on other sites More sharing options...
BrettF Posted November 5, 2007 Share Posted November 5, 2007 1st, thanks for ur help,when u add new ur load function NOT WORKINGWhats not working? Considering 90% of us don't speak the language, we can't understand it, or what it does. might make it easier to bug test... =D Vist my blog!UDFs: Opens The Default Mail Client | _LoginBox | Convert Reg to AU3 | BASS.au3 (BASS.dll) (Includes various BASS Libraries) | MultiLang.au3 (Multi-Language GUIs!)Example Scripts: Computer Info Telnet Server | "Secure" HTTP Server (Based on Manadar's Server)Software: AAMP- Advanced AutoIt Media Player | WorldCam | AYTU - Youtube Uploader Tutorials: Learning to Script with AutoIt V3Projects (Hardware + AutoIt): ArduinoUseful Links: AutoIt 1-2-3 | The AutoIt Downloads Section: | SciTE4AutoIt3 Full Version! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now