Sign in to follow this  
Followers 0
Wader

Need help with CASE getting out of control

6 posts in this topic

I am working on a project that will dyanmically create buttons.

That process is working now thanks to help from this board.

My issue now is that I don't want to create Case statement for all possible buttons created like in the below example.

Is there a way to get around this?

#include <array.au3>
Dim $GUI_DOCKHEIGHT, $GUI_DOCKWIDTH, $GUI_EVENT_CLOSE, $Label1, $Label2, $Manual, $GUI
Dim $Application1, $Application2, $Application3, $Application4, $Application5, $Application6, $Application7, $Application8, $Application9, $Application10
Dim $ManualAutoInstall, $ManualAutoInstall1, $ManualAutoInstall2, $ManualAutoInstall3, $ManualAutoInstall4, $ManualAutoInstall5, $ManualAutoInstall6, $ManualAutoInstall7, $ManualAutoInstall8, $ManualAutoInstall9, $ManualAutoInstall10
Dim $AutoAutoInstall, $AutoAutoInstall1, $AutoAutoInstall2,$AutoAutoInstall3,$AutoAutoInstall4,  $AutoAutoInstall5,  $AutoAutoInstall6, $AutoAutoInstall7, $AutoAutoInstall8, $AutoAutoInstall9, $AutoAutoInstall10 
Dim $AppButtons, $CaseNumber
msgbox(0,"Case Number", $CaseNumber)

$AppInstall = GUICreate(IniRead("applicationstest.ini","GUIConfig","GuiTitle",""), IniRead("applicationstest.ini","GUIConfig","GuiWidth",""), IniRead("applicationstest.ini","GUIConfig","GuiHeight",""), IniRead("applicationstest.ini","GUIConfig","GUILeft",""), IniRead("applicationstest.ini","GUIConfig","GUITop",""))
$Auto = GUICtrlCreateTab(IniRead("applicationstest.ini","GUIConfig","TabLeft",""), IniRead("applicationstest.ini","GUIConfig","TabTop",""), IniRead("applicationstest.ini","GUIConfig","TabWidth",""), IniRead("applicationstest.ini","GUIConfig","TabHeight",""))
GUICtrlSetResizing(-1, $GUI_DOCKWIDTH+$GUI_DOCKHEIGHT)

#Region Tab1 - Auto Apps
$Auto = GUICtrlCreateTabItem("Auto")
$AutoAppList = IniReadSectionNames("applicationstest.ini")
Global $avArray[1000][1000]
$RadioHeight = 150
For $i = 1 to $AutoAppList[0]
    $ApplicationName = IniRead("applicationstest.ini",$AutoAppList[$i],"Name","")
    $ApplicationDistribMode = IniRead("applicationstest.ini",$AutoAppList[$i],"DistributionMode","")
    $ApplicationInstallScript = IniRead("applicationstest.ini",$AutoAppList[$i],"InstallScript","")
    $avArray[$i][0] = $AutoAppList[$i]
    $avArray[$i][1] = $ApplicationInstallScript
    If $ApplicationDistribMode = "Auto" Then $AutoAppListName = GUICtrlCreateLabel($ApplicationName, 30, $RadioHeight, 140, 17)
    If $ApplicationDistribMode = "Auto" AND $ApplicationInstallScript <> "" Then $avArray[$i][0] = GUICtrlCreateButton("Auto Install", 245, $RadioHeight, 75, 17)
    If $ApplicationDistribMode = "Auto" Then $RadioHeight = $RadioHeight + 20
Next
$AutoQUITTop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$AutoUPDATETop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$AutoUpdateINI = GUICtrlCreateButton("UPDATE", 375, $AutoUPDATETop, 100, 25)
$AutoQuit = GUICtrlCreateButton("QUIT", 485, $AutoQUITTop, 100, 25)
#EndRegion

#Region Tab2 - Manual Apps
$Manual = GUICtrlCreateTabItem("Manual")
$ManualAppList = IniReadSectionNames("applicationstest.ini")
$RadioHeight = 150
For $j = 2 to $ManualAppList[0]
    $AppID = $j
    $ApplicationName = IniRead("applicationstest.ini",$ManualAppList[$j],"Name","")
    $ApplicationDistribMode = IniRead("applicationstest.ini",$ManualAppList[$j],"DistributionMode","")
    $ApplicationInstallScript = IniRead("applicationstest.ini",$ManualAppList[$j],"InstallScript","")
    $avArray[$i][0] = $ManualAppList[$j]
    $avArray[$i][1] = $ApplicationInstallScript
    If $ApplicationDistribMode = "Manual" Then $ManualAppList[$j] = GUICtrlCreateLabel($ApplicationName, 30, $RadioHeight, 140, 17)
    If $ApplicationDistribMode = "Manual" AND $ApplicationInstallScript <> "" Then $avArray[$j][0] = GUICtrlCreateButton("AutoInstall", 245, $RadioHeight, 75, 17)
    If $ApplicationDistribMode = "Manual" Then $RadioHeight = $RadioHeight + 20
    $ManualAutoInstall = $ManualAutoInstall & $AppID
Next
$ManualQUITTop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$ManualUPDATETop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$ManualUpdateINI = GUICtrlCreateButton("UPDATE", 375, $ManualUPDATETop, 100, 25)
$ManualQuit = GUICtrlCreateButton("QUIT", 485, $ManualQUITTop, 100, 25)
#EndRegion

GUICtrlCreateTabItem("")
$Header = GUICtrlCreateLabel(IniRead("applicationstest.ini","GUIConfig","Title",""), IniRead("applicationstest.ini","GUIConfig","TitleLeft",""), IniRead("applicationstest.ini","GUIConfig","TitleDown",""), IniRead("applicationstest.ini","GUIConfig","TitleWidth",""), IniRead("applicationstest.ini","GUIConfig","TitleHeight",""))
GUICtrlSetFont(-1, 20, 800, 0, "Arial Black")
$Intro = GUICtrlCreateLabel(IniRead("applicationstest.ini","GUIConfig","Info",""), 20, 56, 600, 55)
GUISetState(@SW_SHOW)

While $GUI <> "QUIT"
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Case $AutoQuit
    Exit
Case $ManualQuit
    Exit    
Case $AutoUpdateINI
    msgbox(4096,"Hold on!", "Not done yet")
Case $ManualUpdateINI
    msgbox(4096,"Hold on!", "Not done yet")
Case $avArray[1][0]
    $CaseNumber = "1"
    _TestFunction($CaseNumber)
Case $avArray[2][0]
    $CaseNumber = "2"
    _TestFunction($CaseNumber)
Case $avArray[3][0]
    $CaseNumber = "3"
    _TestFunction($CaseNumber)
Case $avArray[4][0]
    $CaseNumber = "4"
    _TestFunction($CaseNumber)
Case $avArray[5][0]
    $CaseNumber = "5"
    _TestFunction($CaseNumber)
Case $avArray[6][0]
    $CaseNumber = "6"
    _TestFunction($CaseNumber)
Case $avArray[7][0]
    $CaseNumber = "7"
    _TestFunction($CaseNumber)
Case $avArray[8][0]
    $CaseNumber = "8"
    _TestFunction($CaseNumber)
Case $avArray[9][0]
    $CaseNumber = "9"
    _TestFunction($CaseNumber)
Case $avArray[10][0]
    $CaseNumber = "10"
    _TestFunction($CaseNumber)
Case $avArray[11][0]
    $CaseNumber = "11"
    _TestFunction($CaseNumber)
Case $avArray[12][0]
    $CaseNumber = "12"
    _TestFunction($CaseNumber)
Case $avArray[13][0]
    $CaseNumber = "13"
    _TestFunction($CaseNumber)
EndSwitch
WEnd

Func _TestFunction($CaseNumber)
    $i = $CaseNumber
    msgbox(0,"App " & $CaseNumber, "Application " & $AutoAppList[$i] & ' Install Script "' & $avArray[$i][1] & '" goes here')       
    $CaseNumber = 0
EndFunc

Share this post


Link to post
Share on other sites



Maybe...

While $GUI <> "QUIT"
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Case $AutoQuit
    Exit
Case $ManualQuit
    Exit   
Case $AutoUpdateINI
    msgbox(4096,"Hold on!", "Not done yet")
Case $ManualUpdateINI
    msgbox(4096,"Hold on!", "Not done yet")
;~ Case $avArray[1][0]
;~     $CaseNumber = "1"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[2][0]
;~     $CaseNumber = "2"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[3][0]
;~     $CaseNumber = "3"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[4][0]
;~     $CaseNumber = "4"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[5][0]
;~     $CaseNumber = "5"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[6][0]
;~     $CaseNumber = "6"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[7][0]
;~     $CaseNumber = "7"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[8][0]
;~     $CaseNumber = "8"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[9][0]
;~     $CaseNumber = "9"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[10][0]
;~     $CaseNumber = "10"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[11][0]
;~     $CaseNumber = "11"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[12][0]
;~     $CaseNumber = "12"
;~     _TestFunction($CaseNumber)
;~ Case $avArray[13][0]
;~     $CaseNumber = "13"
;~     _TestFunction($CaseNumber)

    For $i = 1 to UBound($avArray) -1
        If $nMsg = $avArray[$i][0] Then _TestFunction($i)
        Sleep(1)
    Next
EndSwitch
WEnd

8)


NEWHeader1.png

Share this post


Link to post
Share on other sites

#3 ·  Posted (edited)

I tried it out and it didn't work. Nothing happens at all when I click the buttons now.

Appreciate the suggestion though. I am willing to try anything.

Edited by Wader

Share this post


Link to post
Share on other sites

Valuater - Your post actually made it clear. The below code is now working with a modification to the Case Statement.

I really appreciate it!

#include <array.au3>
Dim $GUI_DOCKHEIGHT, $GUI_DOCKWIDTH, $GUI_EVENT_CLOSE, $Label1, $Label2, $Manual, $GUI
Dim $Application1, $Application2, $Application3, $Application4, $Application5, $Application6, $Application7, $Application8, $Application9, $Application10
Dim $ManualAutoInstall, $ManualAutoInstall1, $ManualAutoInstall2, $ManualAutoInstall3, $ManualAutoInstall4, $ManualAutoInstall5, $ManualAutoInstall6, $ManualAutoInstall7, $ManualAutoInstall8, $ManualAutoInstall9, $ManualAutoInstall10
Dim $AutoAutoInstall, $AutoAutoInstall1, $AutoAutoInstall2,$AutoAutoInstall3,$AutoAutoInstall4,  $AutoAutoInstall5,  $AutoAutoInstall6, $AutoAutoInstall7, $AutoAutoInstall8, $AutoAutoInstall9, $AutoAutoInstall10 
Dim $AppButtons, $CaseNumber

$AppInstall = GUICreate(IniRead("applicationstest.ini","GUIConfig","GuiTitle",""), IniRead("applicationstest.ini","GUIConfig","GuiWidth",""), IniRead("applicationstest.ini","GUIConfig","GuiHeight",""), IniRead("applicationstest.ini","GUIConfig","GUILeft",""), IniRead("applicationstest.ini","GUIConfig","GUITop",""))
$Auto = GUICtrlCreateTab(IniRead("applicationstest.ini","GUIConfig","TabLeft",""), IniRead("applicationstest.ini","GUIConfig","TabTop",""), IniRead("applicationstest.ini","GUIConfig","TabWidth",""), IniRead("applicationstest.ini","GUIConfig","TabHeight",""))
GUICtrlSetResizing(-1, $GUI_DOCKWIDTH+$GUI_DOCKHEIGHT)

#Region Tab1 - Auto Apps
$Auto = GUICtrlCreateTabItem("Auto")
$AutoAppList = IniReadSectionNames("applicationstest.ini")
Global $avArray[1000][1000]
$RadioHeight = 150
For $i = 1 to $AutoAppList[0]
    $ApplicationName = IniRead("applicationstest.ini",$AutoAppList[$i],"Name","")
    $ApplicationDistribMode = IniRead("applicationstest.ini",$AutoAppList[$i],"DistributionMode","")
    $ApplicationInstallScript = IniRead("applicationstest.ini",$AutoAppList[$i],"InstallScript","")
    $avArray[$i][0] = $AutoAppList[$i]
    $avArray[$i][1] = $ApplicationInstallScript
    If $ApplicationDistribMode = "Auto" Then $AutoAppListName = GUICtrlCreateLabel($ApplicationName, 30, $RadioHeight, 140, 17)
    If $ApplicationDistribMode = "Auto" AND $ApplicationInstallScript <> "" Then $avArray[$i][0] = GUICtrlCreateButton("Auto Install", 245, $RadioHeight, 75, 17)
    If $ApplicationDistribMode = "Auto" Then $RadioHeight = $RadioHeight + 20
Next
$AutoQUITTop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$AutoUPDATETop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$AutoUpdateINI = GUICtrlCreateButton("UPDATE", 375, $AutoUPDATETop, 100, 25)
$AutoQuit = GUICtrlCreateButton("QUIT", 485, $AutoQUITTop, 100, 25)
#EndRegion

#Region Tab2 - Manual Apps
$Manual = GUICtrlCreateTabItem("Manual")
$ManualAppList = IniReadSectionNames("applicationstest.ini")
$RadioHeight = 150
For $j = 2 to $ManualAppList[0]
    $AppID = $j
    $ApplicationName = IniRead("applicationstest.ini",$ManualAppList[$j],"Name","")
    $ApplicationDistribMode = IniRead("applicationstest.ini",$ManualAppList[$j],"DistributionMode","")
    $ApplicationInstallScript = IniRead("applicationstest.ini",$ManualAppList[$j],"InstallScript","")
    $avArray[$i][0] = $ManualAppList[$j]
    $avArray[$i][1] = $ApplicationInstallScript
    If $ApplicationDistribMode = "Manual" Then $ManualAppList[$j] = GUICtrlCreateLabel($ApplicationName, 30, $RadioHeight, 140, 17)
    If $ApplicationDistribMode = "Manual" AND $ApplicationInstallScript <> "" Then $avArray[$j][0] = GUICtrlCreateButton("AutoInstall", 245, $RadioHeight, 75, 17)
    If $ApplicationDistribMode = "Manual" Then $RadioHeight = $RadioHeight + 20
    $ManualAutoInstall = $ManualAutoInstall & $AppID
Next
$ManualQUITTop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$ManualUPDATETop=IniRead("applicationstest.ini","GUIConfig","TabHeight","")+75
$ManualUpdateINI = GUICtrlCreateButton("UPDATE", 375, $ManualUPDATETop, 100, 25)
$ManualQuit = GUICtrlCreateButton("QUIT", 485, $ManualQUITTop, 100, 25)
#EndRegion

GUICtrlCreateTabItem("")
$Header = GUICtrlCreateLabel(IniRead("applicationstest.ini","GUIConfig","Title",""), IniRead("applicationstest.ini","GUIConfig","TitleLeft",""), IniRead("applicationstest.ini","GUIConfig","TitleDown",""), IniRead("applicationstest.ini","GUIConfig","TitleWidth",""), IniRead("applicationstest.ini","GUIConfig","TitleHeight",""))
GUICtrlSetFont(-1, 20, 800, 0, "Arial Black")
$Intro = GUICtrlCreateLabel(IniRead("applicationstest.ini","GUIConfig","Info",""), 20, 56, 600, 55)
GUISetState(@SW_SHOW)

While $GUI <> "QUIT"
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Case $AutoQuit
    Exit
Case $ManualQuit
    Exit    
Case $AutoUpdateINI
    msgbox(4096,"Hold on!", "Not done yet")
Case $ManualUpdateINI
    msgbox(4096,"Hold on!", "Not done yet")
Case $avArray[1][0] to UBound($avArray)
    For $i = 1 to UBound($avArray) -1
        If $nMsg = $avArray[$i][0] Then 
            $CaseNumber = $i
            _TestFunction($i)
        EndIf
    Next    
EndSwitch
WEnd

Func _TestFunction($CaseNumber)
    $i = $CaseNumber
    msgbox(0,"App " & $CaseNumber, "Application " & $AutoAppList[$i] & ' Install Script "' & $avArray[$i][1] & '" goes here')       
    $CaseNumber = 0
EndFunc

Share this post


Link to post
Share on other sites

#5 ·  Posted (edited)

Maybe, just a lttle cleaner, removed many of the unnecessary dim statements ( they use memory )

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <array.au3>

Dim $GUI, $ManualAutoInstall
;Dim $Label1, $Label2, $Manual, $GUI
;Dim $Application1, $Application2, $Application3, $Application4, $Application5, $Application6, $Application7, $Application8, $Application9, $Application10
;Dim $ManualAutoInstall, $ManualAutoInstall1, $ManualAutoInstall2, $ManualAutoInstall3, $ManualAutoInstall4, $ManualAutoInstall5, $ManualAutoInstall6, $ManualAutoInstall7, $ManualAutoInstall8, $ManualAutoInstall9, $ManualAutoInstall10
; Dim $AutoAutoInstall, $AutoAutoInstall1, $AutoAutoInstall2, $AutoAutoInstall3, $AutoAutoInstall4, $AutoAutoInstall5, $AutoAutoInstall6, $AutoAutoInstall7, $AutoAutoInstall8, $AutoAutoInstall9, $AutoAutoInstall10
;Dim $AppButtons, $CaseNumber

$AppInstall = GUICreate(IniRead("applicationstest.ini", "GUIConfig", "GuiTitle", ""), IniRead("applicationstest.ini", "GUIConfig", "GuiWidth", ""), IniRead("applicationstest.ini", "GUIConfig", "GuiHeight", ""), IniRead("applicationstest.ini", "GUIConfig", "GUILeft", ""), IniRead("applicationstest.ini", "GUIConfig", "GUITop", ""))
$Auto = GUICtrlCreateTab(IniRead("applicationstest.ini", "GUIConfig", "TabLeft", ""), IniRead("applicationstest.ini", "GUIConfig", "TabTop", ""), IniRead("applicationstest.ini", "GUIConfig", "TabWidth", ""), IniRead("applicationstest.ini", "GUIConfig", "TabHeight", ""))
GUICtrlSetResizing(-1, $GUI_DOCKWIDTH + $GUI_DOCKHEIGHT)

#Region Tab1 - Auto Apps
$Auto = GUICtrlCreateTabItem("Auto")
$AutoAppList = IniReadSectionNames("applicationstest.ini")
Global $avArray[1000][1000]
$RadioHeight = 150
For $i = 1 To $AutoAppList[0]
    $ApplicationName = IniRead("applicationstest.ini", $AutoAppList[$i], "Name", "")
    $ApplicationDistribMode = IniRead("applicationstest.ini", $AutoAppList[$i], "DistributionMode", "")
    $ApplicationInstallScript = IniRead("applicationstest.ini", $AutoAppList[$i], "InstallScript", "")
    $avArray[$i][0] = $AutoAppList[$i]
    $avArray[$i][1] = $ApplicationInstallScript
    If $ApplicationDistribMode = "Auto" Then $AutoAppListName = GUICtrlCreateLabel($ApplicationName, 30, $RadioHeight, 140, 17)
    If $ApplicationDistribMode = "Auto" And $ApplicationInstallScript <> "" Then $avArray[$i][0] = GUICtrlCreateButton("Auto Install", 245, $RadioHeight, 75, 17)
    If $ApplicationDistribMode = "Auto" Then $RadioHeight = $RadioHeight + 20
Next
$AutoQUITTop = IniRead("applicationstest.ini", "GUIConfig", "TabHeight", "") + 75
$AutoUPDATETop = IniRead("applicationstest.ini", "GUIConfig", "TabHeight", "") + 75
$AutoUpdateINI = GUICtrlCreateButton("UPDATE", 375, $AutoUPDATETop, 100, 25)
$AutoQuit = GUICtrlCreateButton("QUIT", 485, $AutoQUITTop, 100, 25)
#EndRegion Tab1 - Auto Apps

#Region Tab2 - Manual Apps
$Manual = GUICtrlCreateTabItem("Manual")
$ManualAppList = IniReadSectionNames("applicationstest.ini")
$RadioHeight = 150
For $j = 2 To $ManualAppList[0]
    $AppID = $j
    $ApplicationName = IniRead("applicationstest.ini", $ManualAppList[$j], "Name", "")
    $ApplicationDistribMode = IniRead("applicationstest.ini", $ManualAppList[$j], "DistributionMode", "")
    $ApplicationInstallScript = IniRead("applicationstest.ini", $ManualAppList[$j], "InstallScript", "")
    $avArray[$i][0] = $ManualAppList[$j]
    $avArray[$i][1] = $ApplicationInstallScript
    If $ApplicationDistribMode = "Manual" Then $ManualAppList[$j] = GUICtrlCreateLabel($ApplicationName, 30, $RadioHeight, 140, 17)
    If $ApplicationDistribMode = "Manual" And $ApplicationInstallScript <> "" Then $avArray[$j][0] = GUICtrlCreateButton("AutoInstall", 245, $RadioHeight, 75, 17)
    If $ApplicationDistribMode = "Manual" Then $RadioHeight = $RadioHeight + 20
    $ManualAutoInstall = $ManualAutoInstall & $AppID
Next
$ManualQUITTop = IniRead("applicationstest.ini", "GUIConfig", "TabHeight", "") + 75
$ManualUPDATETop = IniRead("applicationstest.ini", "GUIConfig", "TabHeight", "") + 75
$ManualUpdateINI = GUICtrlCreateButton("UPDATE", 375, $ManualUPDATETop, 100, 25)
$ManualQuit = GUICtrlCreateButton("QUIT", 485, $ManualQUITTop, 100, 25)
#EndRegion Tab2 - Manual Apps

GUICtrlCreateTabItem("")
$Header = GUICtrlCreateLabel(IniRead("applicationstest.ini", "GUIConfig", "Title", ""), IniRead("applicationstest.ini", "GUIConfig", "TitleLeft", ""), IniRead("applicationstest.ini", "GUIConfig", "TitleDown", ""), IniRead("applicationstest.ini", "GUIConfig", "TitleWidth", ""), IniRead("applicationstest.ini", "GUIConfig", "TitleHeight", ""))
GUICtrlSetFont(-1, 20, 800, 0, "Arial Black")
$Intro = GUICtrlCreateLabel(IniRead("applicationstest.ini", "GUIConfig", "Info", ""), 20, 56, 600, 55)
GUISetState(@SW_SHOW)

While $GUI <> "QUIT"
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $AutoQuit, $ManualQuit
            Exit
        Case $AutoUpdateINI
            MsgBox(4096, "Hold on!", "Not done yet")
        Case $ManualUpdateINI
            MsgBox(4096, "Hold on!", "Not done yet")
        Case $avArray[1][0] To UBound($avArray)
            For $i = 1 To UBound($avArray) - 1
                If $nMsg = $avArray[$i][0] Then
                    ;$CaseNumber = $i
                    _TestFunction($i)
                EndIf
            Next
    EndSwitch
WEnd

Func _TestFunction($CaseNumber)
    ;$i = $CaseNumber
    MsgBox(0, "App " & $CaseNumber, "Application " & $AutoAppList[$i] & ' Install Script "' & $avArray[$i][1] & '" goes here')
    ;$CaseNumber = 0
EndFunc   ;==>_TestFunction
.

The includes I added are necessary for other things to function... note the $GUI_EVENT_CLOSE

8)

Edited by Valuater

NEWHeader1.png

Share this post


Link to post
Share on other sites

Thanks again. I cleaned up my script on my end now. I always forget to do that.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0