Jump to content
Sign in to follow this  
snoopy

Im NOOb help please :P

Recommended Posts

snoopy

Hey guys im kinda new and made my own little outo thingy for Toontown:

$answer = MsgBox(4, "Toontown Trainer (English Only)", "F4=stop F5=Stop. Run?")

; Check the user's answer to the prompt (see the help file for MsgBox return values)

; If "No" was clicked (7) then exit the script

If $answer = 7 Then

MsgBox(0, "AutoIt", "OK. Bye!")

exit

Endif

HotKeySet("{F4}", "ExitProg") ;;Sets F4 as a hotkey to exit the progam

HotKeySet("{F5}", "StartProg") ;;Sets F5 as a hotkey to start the program

While 1

Sleep(100)

Wend

Func StartProg()

while 1

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

MouseClick("left", 217, 65, 1)

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

MouseClick("left", 228, 79, 1)

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

MouseClick("left", 173, 81, 1)

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

MouseClick("left", 223, 93, 1)

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

MouseClick("left", 190, 110, 1)

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

MouseClick("left", 214, 112, 1)

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

MouseClick("left", 255, 138, 1)

Sleep(500)

WEnd

EndFunc

Func ExitProg()

Exit 0

EndFunc

as you can see every 3 lines are seperate and i would like to make them go random ,random order but dunno how!

and also when making it exe. using complie exe. i would like to put icons or maybe some thing fancier,

so if i dont ask too much please help me , to learn. :) thank you

oh and as you can see i have 2 hot keys and would like to make it alittle clearer , maybe alittle box that says the hot keys while it all runs but i have about 0 skill in all this. :-(

Share this post


Link to post
Share on other sites
azure

Hey guys im kinda new and made my own little outo thingy for Toontown:

as you can see every 3 lines are seperate and i would like to make them go random ,random order but dunno how!

and also when making it exe. using complie exe. i would like to put icons or maybe some thing fancier,

so if i dont ask too much please help me , to learn. :) thank you

oh and as you can see i have 2 hot keys and would like to make it alittle clearer , maybe alittle box that says the hot keys while it all runs but i have about 0 skill in all this. :-(

Like This?

TraySetIcon("shell32.dll",246)
$answer = MsgBox(4, "Toontown Trainer (English Only)", "F4=Stop F5=Start. Run?")

; Check the user's answer to the prompt (see the help file for MsgBox return values)
; If "No" was clicked (7) then exit the script
If $answer = 7 Then
MsgBox(0, "AutoIt", "OK. Bye!")
exit
Endif

HotKeySet("{F4}", "ExitProg") ;;Sets F4 as a hotkey to exit the progam
HotKeySet("{F5}", "StartProg") ;;Sets F5 as a hotkey to start the program

While 1
Sleep(100) 
Wend

Func StartProg() 
Local $randomcoords[7][2] = [[217,65],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]
While 1
    For $i = 0 To 7
        MouseClick("left", 57, 45, 1)
        MouseClick("left", 127, 61, 1)
        $r = Random(0,6,1)
        MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)
    Next
    Sleep(500)
WEnd
EndFunc

Func ExitProg() 
Exit 0 
EndFunc

Share this post


Link to post
Share on other sites
FireFox

@snoopy

Welcome to autoit forum

Use Random() function and you can with it switch between functions etc...

$rdm = Random(1, 3, 1)
_Func($rdm)

Func _Func($nb)
If $nb = 1 Then
;do something
ElseIf $nb = 2 Then
;do something else
ElseIf $nb = 3 Then
;do something else
EndIf
EndFunc

Edit : @azure

Nice example :)

Cheers, FireFox.

Edited by FireFox

 

OS : Win XP SP2 (32 bits) / Win 7 SP1 (64 bits) / Win 8 (64 bits) | Autoit version: latest stable / beta.
Hardware : Intel(R) Core(TM) i5-2400 CPU @ 3.10Ghz / 8 GiB RAM DDR3.

My UDFs : Skype UDF | TrayIconEx UDF | GUI Panel UDF | Excel XML UDF | Is_Pressed_UDF

My Projects : YouTube Multi-downloader | FTP Easy-UP | Lock'n | WinKill | AVICapture | Skype TM | Tap Maker | ShellNew | Scriptner | Const Replacer | FT_Pocket | Chrome theme maker

My Examples : Capture toolIP Camera | Crosshair | Draw Captured Region | Picture Screensaver | Jscreenfix | Drivetemp | Picture viewer

My Snippets : Basic TCP | Systray_GetIconIndex | Intercept End task | Winpcap various | Advanced HotKeySet | Transparent Edit control

 

Share this post


Link to post
Share on other sites
snoopy

wow the speed of helpers here, lol you guys sure did help but one more thing, i was wondering

is it acctually posible , maybe puting like hmm , say i converted it to exe. than when you run it , itlll open abig window with pic on its backround and there will be like start button or something similar but keeping it simple though

btw could i make the thing go any faster?

Edited by snoopy

Share this post


Link to post
Share on other sites
FireFox

GuiCreate()

GuiCtrlCreatePic()

GuiCtrlCreateButton()

GuiSetState()

Now please read helpfile :)

Cheers, FireFox.


 

OS : Win XP SP2 (32 bits) / Win 7 SP1 (64 bits) / Win 8 (64 bits) | Autoit version: latest stable / beta.
Hardware : Intel(R) Core(TM) i5-2400 CPU @ 3.10Ghz / 8 GiB RAM DDR3.

My UDFs : Skype UDF | TrayIconEx UDF | GUI Panel UDF | Excel XML UDF | Is_Pressed_UDF

My Projects : YouTube Multi-downloader | FTP Easy-UP | Lock'n | WinKill | AVICapture | Skype TM | Tap Maker | ShellNew | Scriptner | Const Replacer | FT_Pocket | Chrome theme maker

My Examples : Capture toolIP Camera | Crosshair | Draw Captured Region | Picture Screensaver | Jscreenfix | Drivetemp | Picture viewer

My Snippets : Basic TCP | Systray_GetIconIndex | Intercept End task | Winpcap various | Advanced HotKeySet | Transparent Edit control

 

Share this post


Link to post
Share on other sites
azure

wow the speed of helpers here, lol you guys sure did help but one more thing, i was wondering

is it acctually posible , maybe puting like hmm , say i converted it to exe. than when you run it , itlll open abig window with pic on its backround and there will be like start button or something similar but keeping it simple though

btw could i make the thing go any faster?

TraySetIcon("shell32.dll",246)
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 298, 226, 193, 115, $WS_POPUP, 0)
$Pic1 = GUICtrlCreatePic(@WINDOWSDIR&"\Greenstone.bmp", 0, 0, 297, 225, BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))
GuiCtrlSetState(-1,$GUI_DISABLE)
$START = GUICtrlCreateButton("START", 96, 64, 113, 49, 0)
GUICtrlSetFont(-1, 24, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0xFFFFFF)
GUICtrlSetBkColor(-1, 0x808000)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $START
            GUIDelete($Form1)
            ExitLoop
    EndSwitch
WEnd

HotKeySet("{F4}", "ExitProg") ;;Sets F4 as a hotkey to exit the progam
HotKeySet("{F5}", "StartProg") ;;Sets F5 as a hotkey to start the program

While 1
Sleep(100) 
Wend

Func StartProg() 
Local $randomcoords[7][2] = [[217,65],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]
While 1
    For $i = 0 To 7
        MouseClick("left", 57, 45, 1)
        MouseClick("left", 127, 61, 1)
        $r = Random(0,6,1)
        MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)
    Next
    Sleep(500)
WEnd
EndFunc


Func ExitProg() 
Exit 0 
EndFunc

Share this post


Link to post
Share on other sites
FireFox

@azure

you like giving the fish... How can he learn if you give him all ? :)

Cheers, FireFox.


 

OS : Win XP SP2 (32 bits) / Win 7 SP1 (64 bits) / Win 8 (64 bits) | Autoit version: latest stable / beta.
Hardware : Intel(R) Core(TM) i5-2400 CPU @ 3.10Ghz / 8 GiB RAM DDR3.

My UDFs : Skype UDF | TrayIconEx UDF | GUI Panel UDF | Excel XML UDF | Is_Pressed_UDF

My Projects : YouTube Multi-downloader | FTP Easy-UP | Lock'n | WinKill | AVICapture | Skype TM | Tap Maker | ShellNew | Scriptner | Const Replacer | FT_Pocket | Chrome theme maker

My Examples : Capture toolIP Camera | Crosshair | Draw Captured Region | Picture Screensaver | Jscreenfix | Drivetemp | Picture viewer

My Snippets : Basic TCP | Systray_GetIconIndex | Intercept End task | Winpcap various | Advanced HotKeySet | Transparent Edit control

 

Share this post


Link to post
Share on other sites
snoopy

ahh i seee tnx, 1 leads to the other :) ok thats fine ill try and master all this :lmao: tnx for all your help dudes

Share this post


Link to post
Share on other sites
snoopy

ok now, i wrote all that in Scite and on top of the script i wrote #AutoIt3Wrapper_icon=Cool-256x256.ico so the exe. will have my icon on it but it seems like it

doesent work well its located in my desktop, do i have to relocate it to the autoit folder or what?

Share this post


Link to post
Share on other sites
FireFox

@snoopy

right click on your script > compile with options :)

Cheers, FireFox.


 

OS : Win XP SP2 (32 bits) / Win 7 SP1 (64 bits) / Win 8 (64 bits) | Autoit version: latest stable / beta.
Hardware : Intel(R) Core(TM) i5-2400 CPU @ 3.10Ghz / 8 GiB RAM DDR3.

My UDFs : Skype UDF | TrayIconEx UDF | GUI Panel UDF | Excel XML UDF | Is_Pressed_UDF

My Projects : YouTube Multi-downloader | FTP Easy-UP | Lock'n | WinKill | AVICapture | Skype TM | Tap Maker | ShellNew | Scriptner | Const Replacer | FT_Pocket | Chrome theme maker

My Examples : Capture toolIP Camera | Crosshair | Draw Captured Region | Picture Screensaver | Jscreenfix | Drivetemp | Picture viewer

My Snippets : Basic TCP | Systray_GetIconIndex | Intercept End task | Winpcap various | Advanced HotKeySet | Transparent Edit control

 

Share this post


Link to post
Share on other sites
azure

@azure

you like giving the fish... How can he learn if you give him all ? :)

Cheers, FireFox.

Meh.. I was bored at work, waiting on other people to answer questions.. Gives me something to do.. I'm still learning AutoIT, so it's good for me.

Share this post


Link to post
Share on other sites
FireFox

@azure

If youre boring you can learn all functions of helpfile and then see important udfs :)

Cheers, FireFox.


 

OS : Win XP SP2 (32 bits) / Win 7 SP1 (64 bits) / Win 8 (64 bits) | Autoit version: latest stable / beta.
Hardware : Intel(R) Core(TM) i5-2400 CPU @ 3.10Ghz / 8 GiB RAM DDR3.

My UDFs : Skype UDF | TrayIconEx UDF | GUI Panel UDF | Excel XML UDF | Is_Pressed_UDF

My Projects : YouTube Multi-downloader | FTP Easy-UP | Lock'n | WinKill | AVICapture | Skype TM | Tap Maker | ShellNew | Scriptner | Const Replacer | FT_Pocket | Chrome theme maker

My Examples : Capture toolIP Camera | Crosshair | Draw Captured Region | Picture Screensaver | Jscreenfix | Drivetemp | Picture viewer

My Snippets : Basic TCP | Systray_GetIconIndex | Intercept End task | Winpcap various | Advanced HotKeySet | Transparent Edit control

 

Share this post


Link to post
Share on other sites
snoopy

Am i doing something wrong?

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****

#AutoIt3Wrapper_Version=Beta

#AutoIt3Wrapper_icon=Cool-256x256.ico

#AutoIt3Wrapper_Res_Comment=this is my first time making anything like taht :)

#AutoIt3Wrapper_Res_Fileversion=0.0.1

#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****

TraySetIcon("shell32.dll",246)

#include <ButtonConstants.au3>

#include <GUIConstantsEx.au3>

#include <StaticConstants.au3>

#include <WindowsConstants.au3>

#Region ### START Koda GUI section ### Form=

$Form1 = GUICreate("Form1", 298, 226, 193, 115, $WS_POPUP, 0)

$Pic1 = GUICtrlCreatePic(@WINDOWSDIR&"\Greenstone.bmp", 0, 0, 297, 225, BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))

GuiCtrlSetState(-1,$GUI_DISABLE)

$START = GUICtrlCreateButton("START", 96, 64, 113, 49, 0)

GUICtrlSetFont(-1, 24, 400, 0, "MS Sans Serif")

GUICtrlSetColor(-1, 0xFFFFFF)

GUICtrlSetBkColor(-1, 0x808000)

GUISetState(@SW_SHOW)

#EndRegion ### END Koda GUI section ###

While 1

$nMsg = GUIGetMsg()

Switch $nMsg

Case $GUI_EVENT_CLOSE

Exit

Case $START

GUIDelete($Form1)

ExitLoop

EndSwitch

WEnd

HotKeySet("{F4}", "ExitProg") ;;Sets F4 as a hotkey to exit the progam

HotKeySet("{F5}", "StartProg") ;;Sets F5 as a hotkey to start the program

HotKeySet("{F6}", "StartProg") ;;Sets F6 as a hotkey to start the program 2#

Sleep(100)

Wend

Func StartProg()

Local $randomcoords[7][2] = [[217,65],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]

While 1

For $i = 0 To 7

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

$r = Random(0,6,1)

MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)

Next

Sleep(500)

while if F6 was pressed than;

Switch

Func StartProg 2#()

Local $randomcoords[7][2] = [[217,75],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]

While 1

For $i = 0 To 7

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

$r = Random(0,6,1)

MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)

Next

Sleep(500)

WEnd

EndFunc

as you can see i am trieng to do this: if you press f6 you will get startprog no.2

and if you press f5 you get start prog n.1

but seems like it has 0 effect :-X

BTW thanks for all the help and support

Share this post


Link to post
Share on other sites
azure

Am i doing something wrong?

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****

#AutoIt3Wrapper_Version=Beta

#AutoIt3Wrapper_icon=Cool-256x256.ico

#AutoIt3Wrapper_Res_Comment=this is my first time making anything like taht :)

#AutoIt3Wrapper_Res_Fileversion=0.0.1

#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****

TraySetIcon("shell32.dll",246)

#include <ButtonConstants.au3>

#include <GUIConstantsEx.au3>

#include <StaticConstants.au3>

#include <WindowsConstants.au3>

#Region ### START Koda GUI section ### Form=

$Form1 = GUICreate("Form1", 298, 226, 193, 115, $WS_POPUP, 0)

$Pic1 = GUICtrlCreatePic(@WINDOWSDIR&"\Greenstone.bmp", 0, 0, 297, 225, BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))

GuiCtrlSetState(-1,$GUI_DISABLE)

$START = GUICtrlCreateButton("START", 96, 64, 113, 49, 0)

GUICtrlSetFont(-1, 24, 400, 0, "MS Sans Serif")

GUICtrlSetColor(-1, 0xFFFFFF)

GUICtrlSetBkColor(-1, 0x808000)

GUISetState(@SW_SHOW)

#EndRegion ### END Koda GUI section ###

While 1

$nMsg = GUIGetMsg()

Switch $nMsg

Case $GUI_EVENT_CLOSE

Exit

Case $START

GUIDelete($Form1)

ExitLoop

EndSwitch

WEnd

HotKeySet("{F4}", "ExitProg") ;;Sets F4 as a hotkey to exit the progam

HotKeySet("{F5}", "StartProg") ;;Sets F5 as a hotkey to start the program

HotKeySet("{F6}", "StartProg") ;;Sets F6 as a hotkey to start the program 2#

Sleep(100)

Wend

Func StartProg()

Local $randomcoords[7][2] = [[217,65],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]

While 1

For $i = 0 To 7

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

$r = Random(0,6,1)

MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)

Next

Sleep(500)

while if F6 was pressed than;

Switch

Func StartProg 2#()

Local $randomcoords[7][2] = [[217,75],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]

While 1

For $i = 0 To 7

MouseClick("left", 57, 45, 1)

MouseClick("left", 127, 61, 1)

$r = Random(0,6,1)

MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)

Next

Sleep(500)

WEnd

EndFunc

as you can see i am trieng to do this: if you press f6 you will get startprog no.2

and if you press f5 you get start prog n.1

but seems like it has 0 effect :-X

BTW thanks for all the help and support

Yes... for one, you're not using [ autoit ] tags in your posts which makes reading code annoying.

Another thing.. why have an icon file if you're not using it (trayseticon function)

Another thing.. your startprog #2 function name is all wrong. You can't use spaces in function names.

Another thing.. Your loops were all wacky.. You didn't have WEnd's where you had While's.

You can't just start functions in the middle of loops too.

Did you even check the errors you got when you tried compiling this?

Try this:

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Version=Beta
#AutoIt3Wrapper_icon=Cool-256x256.ico
#AutoIt3Wrapper_Res_Comment=this is my first time making anything like taht 
#AutoIt3Wrapper_Res_Fileversion=0.0.1
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
TraySetIcon("Cool-256x256.ico")
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 298, 226, 193, 115, $WS_POPUP, 0)
$Pic1 = GUICtrlCreatePic(@WINDOWSDIR&"\Greenstone.bmp", 0, 0, 297, 225, BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))
GuiCtrlSetState(-1,$GUI_DISABLE)
$START = GUICtrlCreateButton("START", 96, 64, 113, 49, 0)
GUICtrlSetFont(-1, 24, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0xFFFFFF)
GUICtrlSetBkColor(-1, 0x808000)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $START
GUIDelete($Form1)
ExitLoop
EndSwitch
WEnd

HotKeySet("{F4}", "ExitProg") ;;Sets F4 as a hotkey to exit the progam
HotKeySet("{F5}", "StartProg") ;;Sets F5 as a hotkey to start the program
HotKeySet("{F6}", "StartProg2") ;;Sets F6 as a hotkey to start the program 2#

While 1
Sleep(100) 
Wend

Func StartProg() 
Local $randomcoords[7][2] = [[217,65],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]
While 1
For $i = 0 To 7
MouseClick("left", 57, 45, 1)
MouseClick("left", 127, 61, 1)
$r = Random(0,6,1)
MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)
Next
Sleep(500)
WEnd
EndFunc

;while if F6 was pressed than;
;Switch
Func StartProg2()
Local $randomcoords[7][2] = [[217,75],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]
While 1
For $i = 0 To 7
MouseClick("left", 57, 45, 1)
MouseClick("left", 127, 61, 1)
$r = Random(0,6,1)
MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)
Next
Sleep(500)
WEnd
EndFunc
Edited by azure

Share this post


Link to post
Share on other sites
snoopy

Yes... for one, you're not using [ autoit ] tags in your posts which makes reading code annoying.

Another thing.. why have an icon file if you're not using it (trayseticon function)

Another thing.. your startprog #2 function name is all wrong. You can't use spaces in function names.

Another thing.. Your loops were all wacky.. You didn't have WEnd's where you had While's.

You can't just start functions in the middle of loops too.

Did you even check the errors you got when you tried compiling this?

Try this:

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Version=Beta
#AutoIt3Wrapper_icon=Cool-256x256.ico
#AutoIt3Wrapper_Res_Comment=this is my first time making anything like taht 
#AutoIt3Wrapper_Res_Fileversion=0.0.1
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
TraySetIcon("Cool-256x256.ico")
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 298, 226, 193, 115, $WS_POPUP, 0)
$Pic1 = GUICtrlCreatePic(@WINDOWSDIR&"\Greenstone.bmp", 0, 0, 297, 225, BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))
GuiCtrlSetState(-1,$GUI_DISABLE)
$START = GUICtrlCreateButton("START", 96, 64, 113, 49, 0)
GUICtrlSetFont(-1, 24, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0xFFFFFF)
GUICtrlSetBkColor(-1, 0x808000)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $START
GUIDelete($Form1)
ExitLoop
EndSwitch
WEnd

HotKeySet("{F4}", "ExitProg") ;;Sets F4 as a hotkey to exit the progam
HotKeySet("{F5}", "StartProg") ;;Sets F5 as a hotkey to start the program
HotKeySet("{F6}", "StartProg2") ;;Sets F6 as a hotkey to start the program 2#

While 1
Sleep(100) 
Wend

Func StartProg() 
Local $randomcoords[7][2] = [[217,65],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]
While 1
For $i = 0 To 7
MouseClick("left", 57, 45, 1)
MouseClick("left", 127, 61, 1)
$r = Random(0,6,1)
MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)
Next
Sleep(500)
WEnd
EndFunc

;while if F6 was pressed than;
;Switch
Func StartProg2()
Local $randomcoords[7][2] = [[217,75],[228,79],[173,81],[223,93],[190,110],[214,112],[255,138]]
While 1
For $i = 0 To 7
MouseClick("left", 57, 45, 1)
MouseClick("left", 127, 61, 1)
$r = Random(0,6,1)
MouseClick("left", $randomcoords[$r][0], $randomcoords[$r][1], 1)
Next
Sleep(500)
WEnd
EndFunc

it shows an ERROR:

C:\Users\Snoopy\Desktop\1st project.au3(35,29) : ERROR: ExitProg(): undefined function.

HotKeySet("{F4}", "ExitProg")

~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\Users\Snoopy\Desktop\1st project.au3 - 1 error(s), 0 warning(s)

Share this post


Link to post
Share on other sites
azure

it shows an ERROR:

C:\Users\Snoopy\Desktop\1st project.au3(35,29) : ERROR: ExitProg(): undefined function.

HotKeySet("{F4}", "ExitProg")

~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\Users\Snoopy\Desktop\1st project.au3 - 1 error(s), 0 warning(s)

Add this to the end.. you left it out of the code you posted, but it's in your earlier responses.

Func ExitProg() 
Exit 0 
EndFunc

Share this post


Link to post
Share on other sites
snoopy

Hi ,, thnx alot Azura , now i would like to know more about pixel ditecters and pixel clickers , what if i got HTML colour and i would like to make my script click into it?

what do i do?

tnx alot for the attention , although ive tried to find , they were all hard to undarstand and i would like to get it as simple as posible tnx :)

Share this post


Link to post
Share on other sites
FireFox

@snoopy

helpfile or faq Q19

Cheers, FireFox.


 

OS : Win XP SP2 (32 bits) / Win 7 SP1 (64 bits) / Win 8 (64 bits) | Autoit version: latest stable / beta.
Hardware : Intel(R) Core(TM) i5-2400 CPU @ 3.10Ghz / 8 GiB RAM DDR3.

My UDFs : Skype UDF | TrayIconEx UDF | GUI Panel UDF | Excel XML UDF | Is_Pressed_UDF

My Projects : YouTube Multi-downloader | FTP Easy-UP | Lock'n | WinKill | AVICapture | Skype TM | Tap Maker | ShellNew | Scriptner | Const Replacer | FT_Pocket | Chrome theme maker

My Examples : Capture toolIP Camera | Crosshair | Draw Captured Region | Picture Screensaver | Jscreenfix | Drivetemp | Picture viewer

My Snippets : Basic TCP | Systray_GetIconIndex | Intercept End task | Winpcap various | Advanced HotKeySet | Transparent Edit control

 

Share this post


Link to post
Share on other sites
snoopy

$coord = PixelSearch(0, 0, 1, 1, 0xb3ee90, 2, 2);

If Not @error Then

MsgBox(0, "X and Y are:", $coord[0] & "," & $coord[1]);

MouseClick("left", $coord[0], $coord[1]);

EndIf

Seems like it doesent take any action, suppose to press the icon below but doesent :)

could any one give me little tips?

post-44959-1232287655_thumb.jpg

Edited by snoopy

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×