Sign in to follow this  
Followers 0
herewasplato

Wireless NIC - SSID & WPA Settings

9 posts in this topic

#1 ·  Posted (edited)

Because of this post:

http://www.autoitscript.com/forum/index.php?showtopic=90184

;Only tested on XP
AutoItSetOption("WinWaitDelay", 1) ;(milliseconds)
AutoItSetOption("TrayIconDebug", 1) ;0-off
AutoItSetOption("WinTitleMatchMode", 2) ;1-from the start, 2-any substring, 3-exact match
HotKeySet("{ESC}", "Terminate")

;set this to 0 to turn off the TrayTips and debug sleeps
Global $Debug_Sleep = 5000 ;(milliseconds)
;set it to something like 5000 if you want to read the script's TrayTips and glance at the windows
;you may have to manually close the TrayTip(s) generated by the wireless NIC itself
;to be able to see the ones made by the script


Global $SSID = "YourSSID"
Global $Authentication_Method = "WPA-PSK"
Global $Encryption_Method = "TKIP"
Global $Network_Key = "12345678"
Global $WinTitle, $WinText, $WinTimeout, $hwnd


;on my laptop
;if the wireless network interface card has been disabled, then the tab named "Wireless Networks"...
;... will not be present in the "Wireless Network Connection Properties" window
;the script attempts to deal with that


;on my laptop
;if the Wireless Zero Configuration service is not running, then the tab named "Wireless Networks"...
;... will not be present in the "Wireless Network Connection Properties" window
;the script attempts to deal with that


;Also, the connection might not be named "Wireless Network Connection"
;the script attempts to deal with that
;by only looking for the word "Properties" in the NIC's "Properties" window
;but wireless has to be somewhere in the connection's name <<<<<<<<<<<<<<<<<<<<<<<<<<<<<


;one option around not needing wireless in the connection's name
;would be to enable all NICs,
;press ENTER on each NIC entry
;if a status window appears AND text like "View Wireless Networks"
;then you might have the NIC of interest.
;and then there are users like me that have two wireless NICS............


;the worst scenario for this script is:
;Wireless Zero Configuration service stopped
;Wireless Zero Configuration service disabled
;wireless NIC disabled
;radio off on the wireless NIC


;the script attempts to handle all but the radio being off
;on my laptop - the configuration was able to complete with the radio off <<<<<<<<<<<<<<<<<<<<
;but the combination of all of the other things means that the
;tab named "Wireless Networks" is very slow to appear
;in the NIC's "Properties" window
;you may see that properties window appear and disappear repeatedly
;while the script keeps checking for that tab.


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;constants for the ServiceControl UDF
;Author: SumTingWong aka pacman ???
;http://www.autoitscript.com/forum/index.php?showtopic=6487
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Global $STANDARD_RIGHTS_REQUIRED = 0x000F0000

; Service Control Manager access types
Global $SC_MANAGER_CONNECT = 0x0001
Global $SC_MANAGER_CREATE_SERVICE = 0x0002
Global $SC_MANAGER_ENUMERATE_SERVICE = 0x0004
Global $SC_MANAGER_LOCK = 0x0008
Global $SC_MANAGER_QUERY_LOCK_STATUS = 0x0010
Global $SC_MANAGER_MODIFY_BOOT_CONFIG = 0x0020

Global $SC_MANAGER_ALL_ACCESS = BitOR($STANDARD_RIGHTS_REQUIRED, _
        $SC_MANAGER_CONNECT, _
        $SC_MANAGER_CREATE_SERVICE, _
        $SC_MANAGER_ENUMERATE_SERVICE, _
        $SC_MANAGER_LOCK, _
        $SC_MANAGER_QUERY_LOCK_STATUS, _
        $SC_MANAGER_MODIFY_BOOT_CONFIG)

; Service access types
Global $SERVICE_QUERY_CONFIG = 0x0001
Global $SERVICE_CHANGE_CONFIG = 0x0002
Global $SERVICE_QUERY_STATUS = 0x0004
Global $SERVICE_ENUMERATE_DEPENDENTS = 0x0008
Global $SERVICE_START = 0x0010
Global $SERVICE_STOP = 0x0020
Global $SERVICE_PAUSE_CONTINUE = 0x0040
Global $SERVICE_INTERROGATE = 0x0080
Global $SERVICE_USER_DEFINED_CONTROL = 0x0100

Global $SERVICE_ALL_ACCESS = BitOR($STANDARD_RIGHTS_REQUIRED, _
        $SERVICE_QUERY_CONFIG, _
        $SERVICE_CHANGE_CONFIG, _
        $SERVICE_QUERY_STATUS, _
        $SERVICE_ENUMERATE_DEPENDENTS, _
        $SERVICE_START, _
        $SERVICE_STOP, _
        $SERVICE_PAUSE_CONTINUE, _
        $SERVICE_INTERROGATE, _
        $SERVICE_USER_DEFINED_CONTROL)

; Service controls
Global $SERVICE_CONTROL_STOP = 0x00000001
Global $SERVICE_CONTROL_PAUSE = 0x00000002
Global $SERVICE_CONTROL_CONTINUE = 0x00000003
Global $SERVICE_CONTROL_INTERROGATE = 0x00000004
Global $SERVICE_CONTROL_SHUTDOWN = 0x00000005
Global $SERVICE_CONTROL_PARAMCHANGE = 0x00000006
Global $SERVICE_CONTROL_NETBINDADD = 0x00000007
Global $SERVICE_CONTROL_NETBINDREMOVE = 0x00000008
Global $SERVICE_CONTROL_NETBINDENABLE = 0x00000009
Global $SERVICE_CONTROL_NETBINDDISABLE = 0x0000000A
Global $SERVICE_CONTROL_DEVICEEVENT = 0x0000000B
Global $SERVICE_CONTROL_HARDWAREPROFILECHANGE = 0x0000000C
Global $SERVICE_CONTROL_POWEREVENT = 0x0000000D
Global $SERVICE_CONTROL_SESSIonchange = 0x0000000E

; Service types
Global $SERVICE_KERNEL_DRIVER = 0x00000001
Global $SERVICE_FILE_SYSTEM_DRIVER = 0x00000002
Global $SERVICE_ADAPTER = 0x00000004
Global $SERVICE_RECOGNIZER_DRIVER = 0x00000008
Global $SERVICE_DRIVER = BitOR($SERVICE_KERNEL_DRIVER, _
        $SERVICE_FILE_SYSTEM_DRIVER, _
        $SERVICE_RECOGNIZER_DRIVER)
Global $SERVICE_WIN32_OWN_PROCESS = 0x00000010
Global $SERVICE_WIN32_SHARE_PROCESS = 0x00000020
Global $SERVICE_WIN32 = BitOR($SERVICE_WIN32_OWN_PROCESS, _
        $SERVICE_WIN32_SHARE_PROCESS)
Global $SERVICE_INTERACTIVE_PROCESS = 0x00000100
Global $SERVICE_TYPE_ALL = BitOR($SERVICE_WIN32, _
        $SERVICE_ADAPTER, _
        $SERVICE_DRIVER, _
        $SERVICE_INTERACTIVE_PROCESS)

; Service start types
Global $SERVICE_BOOT_START = 0x00000000
Global $SERVICE_SYSTEM_START = 0x00000001
Global $SERVICE_AUTO_START = 0x00000002
Global $SERVICE_DEMAND_START = 0x00000003
Global $SERVICE_DISABLED = 0x00000004

; Service error control
Global $SERVICE_ERROR_IGNORE = 0x00000000
Global $SERVICE_ERROR_NORMAL = 0x00000001
Global $SERVICE_ERROR_SEVERE = 0x00000002
Global $SERVICE_ERROR_CRITICAL = 0x00000003
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


;for debugging;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Do ;
;    _StopService("", "WZCSVC")
;    Sleep(100)
;Until Not _ServiceRunning("", "WZCSVC")
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

If $Debug_Sleep > 0 Then TrayTip("Checking to see if...", "...the ""Wireless Zero Configuration"" service is running.", 100)
;if the service has been disabled - then this should fix that
RunWait("sc config WZCSVC start= auto", "", @SW_HIDE)
;if WZCSVC was already set to automatic - the code above won't hurt that
;if WZCSVC was already running - the code above won't hurt that
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)
If Not _ServiceRunning("", "WZCSVC") Then
    If $Debug_Sleep > 0 Then TrayTip("Attempting...", "...to start the ""Wireless Zero Configuration"" service.", 100)
    ;now the service should start unless it is completely hosed
    For $i = 1 To 10
        _StartService("", "WZCSVC")
        Sleep(3000)
        If _ServiceRunning("", "WZCSVC") Then ExitLoop
    Next
    If Not _ServiceRunning("", "WZCSVC") Then
        MsgBox(0, "AutoIt", "The Wireless Zero Configuration service could not be started.")
        Exit
    EndIf
EndIf
If $Debug_Sleep > 0 Then
    Sleep($Debug_Sleep)
    TrayTip("Its ALIVE!!!...", "...the ""Wireless Zero Configuration"" service is running.", 100)
    Sleep($Debug_Sleep)
EndIf


If $Debug_Sleep > 0 Then
    TrayTip("Opening the Network Connections explorer window...", "...and ""looking"" for the word wireless.", 100)
    Sleep($Debug_Sleep)
EndIf
Run("control ncpa.cpl")
$hwnd = _Window_Check("Network Connections", "Network Connections", 10)
If Not ControlSend($hwnd, "Network Connections", "SysListView321", "wireless") Then
    MsgBox(0, "AutoIt", "Control could not be found.")
    Exit
EndIf
$ret1 = ControlListView($hwnd, "Network Connections", "SysListView321", "GetSelected")
$ret2 = ControlListView($hwnd, "Network Connections", "SysListView321", "GetText", $ret1)
If StringInStr($ret2, "wireless") = 0 Then
    MsgBox(0, "AutoIt", "No connection named with ""wireless"" in its name could be found.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


;netsh did not work here when I tried to enable a disabled NIC
;http://support.microsoft.com/kb/262265
;the WMI service is off - so this seemed to be the simplest way
;since the window was open any way......
If $Debug_Sleep > 0 Then
    TrayTip("Enabling - if need be...", "...the first wireless connection entry located.", 100)
    Sleep($Debug_Sleep)
EndIf
For $i = 1 To 30
    If $i = 29 Then
        MsgBox(0, "AutoIt", "This does not appear to be a ""wireless"" card after all.")
        Exit
    EndIf
    ;this ENTER should either enable the NIC
    ;or bring up the status window
    ;or bring up the window that lets you choose a wireless network - if the radio is off
    ;or ???
    ControlSend($hwnd, "Network Connections", "SysListView321", "wireless")
    ControlSend($hwnd, "Network Connections", "SysListView321", "{ENTER}")
    If WinWait("", "Enabl", 1) Then ExitLoop ;catch Enabling... or Enabled
    If WinWait("Status", "View Wireless Networks", 1) Then ExitLoop
    If WinWait("", "Choose a wireless network", 1) Then ExitLoop
Next
WinClose("Status", "View Wireless Networks")
WinClose("", "Choose a wireless network")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Opening...", "...the ""Properties"" of first wireless connection entry located.", 100)
    Sleep($Debug_Sleep)
EndIf
For $i = 1 To 30
    If $i = 29 Then
        MsgBox(0, "AutoIt", "The Wireless Zero Configuration service does not seem to be ready to be configured. Run the program again.")
        Exit
    EndIf
    ;this control was found in the code above - probably don't need error checking for the control here
    ControlSend("Network Connections", "Network Connections", "SysListView321", "!{ENTER}") ;brings up the properties
    Sleep(1000)
    ;if the "Wireless Networks" tab is missing, then keep looping
    If WinExists("Properties", "General") Then
        ControlCommand("Properties", "General", "SysTabControl321", "TabRight", "")
        Sleep(500)
        If WinExists("Properties", "Wireless Networks") Then
            $hwnd = WinGetHandle("Properties", "Wireless Networks") ;take the $hwnd into the next blocks of code
            ExitLoop
        Else
            WinClose("Properties")
        EndIf
    EndIf
Next
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


;if the "Wireless Zero Configuration" service had been stopped,
;it might take a while for this radio button to be enabled
For $i = 1 To 1000
    If $Debug_Sleep > 0 Then TrayTip("Waiting...", "...for the ""Wireless Zero Configuration"" service to be ready.", 100)
    If ControlCommand($hwnd, "Wireless Networks", "Button1", "IsEnabled", "") Then ExitLoop
    Sleep(100)
    If $i = 99 Then
        MsgBox(0, "AutoIt", "The option to check the ""Use Windows to configure my wireless network settings"" is not enabled.")
        Exit
    EndIf
Next
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Putting a check by - if need be...", "...""Use Windows to configure my wireless network settings""", 100)
    Sleep($Debug_Sleep)
EndIf
;the next line will only check the radio button
;it does not toggle the state to unchecked if it was already checked
ControlCommand($hwnd, "Wireless Networks", "Button1", "Check", "")
If Not ControlCommand($hwnd, "Wireless Networks", "Button1", "IsChecked", "") Then
    MsgBox(0, "AutoIt", """Use Windows to configure my wireless network settings"" was not checked.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""Add..."".", 100)
    Sleep($Debug_Sleep)
EndIf
ControlFocus($hwnd, "Wireless Networks", "Button7")
If Not ControlClick($hwnd, "Wireless Networks", "Button7") Then
    MsgBox(0, "AutoIt", "Control could not be found.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Entering...", "...the ""Network name (SSID)"".", 100)
    Sleep($Debug_Sleep)
EndIf
$hwnd = _Window_Check("Wireless network properties", "Wireless network key", 10)
If Not ControlSetText($hwnd, "Association", "Edit1", $SSID) Then
    MsgBox(0, "AutoIt", "Control could not be found.")
    Exit
Else
    If Not ControlGetText($hwnd, "Association", "Edit1") == $SSID Then
        MsgBox(0, "AutoIt", "The SSID text was not set properly.")
        Exit
    EndIf
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Putting a check by - if need be...", "...""Connect even if this network is not broadcasting"".", 100)
    Sleep($Debug_Sleep)
EndIf
;the next line will only check the radio button
;it does not toggle the state to unchecked if it was already checked
ControlCommand($hwnd, "Wireless network key", "Button1", "Check", "")
For $i = 1 To 100
    Sleep(100)
    If ControlCommand($hwnd, "Wireless network key", "Button1", "IsChecked", "") Then ExitLoop
Next
If Not ControlCommand($hwnd, "Wireless network key", "Button1", "IsChecked", "") Then
    MsgBox(0, "AutoIt", """Connect even if this network is not broadcasting"" was not checked.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Selecting...", "...the ""Network Authentication"" method.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlCommand($hwnd, "Wireless network key", "ComboBox1", "SelectString", $Authentication_Method)
If Not ControlCommand($hwnd, "Wireless network key", "ComboBox1", "GetCurrentSelection", "") == $Authentication_Method Then
    MsgBox(0, "AutoIt", "The authentication method was not set properly.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Selecting...", "...the ""Data encryption"" method.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlCommand($hwnd, "Wireless network key", "ComboBox2", "SelectString", $Encryption_Method)
If Not ControlCommand($hwnd, "Wireless network key", "ComboBox2", "GetCurrentSelection", "") == $Encryption_Method Then
    MsgBox(0, "AutoIt", "The encryption method was not set properly.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Entering...", "...the ""Network key"" and confirming it.", 100)
    Sleep($Debug_Sleep)
EndIf
;not much error checking here
ControlSetText($hwnd, "Wireless network key", "Edit2", $Network_Key)
ControlSetText($hwnd, "Wireless network key", "Edit3", $Network_Key)
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""OK"" in the ""Wireless network properties"" window.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlClick($hwnd, "", "Button5")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""OK"" in the NIC's ""Properties"" window.", 100)
    Sleep($Debug_Sleep)
EndIf
$hwnd = _Window_Check("Properties", "Wireless Networks", 10)
ControlClick($hwnd, "Wireless Networks", "Button11")
WinWaitClose($hwnd)
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Closing the Network Connections explorer window...", "...and hoping that this all works.", 100)
    Sleep($Debug_Sleep)
EndIf
WinClose("Network Connections")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


Func _Window_Check($WinTitle, $WinText, $WinTimeout)
    If WinWait($WinTitle, $WinText, $WinTimeout) = 0 Then
        MsgBox(0, "AutoIt", "The window named " & $WinTitle & " with the text " & $WinText & " did not open in time.")
        Exit
    EndIf

    If WinActivate($WinTitle, $WinText) = 0 Then
        MsgBox(0, "AutoIt", "The window named " & $WinTitle & " with the text " & $WinText & " can not be found or cannot be activated.")
        Exit
    EndIf

    If WinWaitActive($WinTitle, $WinText, $WinTimeout) = 0 Then
        MsgBox(0, "AutoIt", "The window named " & $WinTitle & " with the text " & $WinText & " did not activate in time.")
        Exit
    EndIf

    $hwnd = WinGetHandle($WinTitle, $WinText)
    If $hwnd = "" Then
        MsgBox(0, "AutoIt", "Could not get the window handle for the window named " & $WinTitle & " with the text " & $WinText & ".")
        Exit
    Else
        Return $hwnd
    EndIf
EndFunc   ;==>_Window_Check


;===============================================================================
; Description:   Starts a service on a computer
; Parameters:    $sComputerName - name of the target computer. If empty, the local computer name is used
;                $sServiceName - name of the service to start
; Requirements:  None
; Return Values: On Success - 1
;                On Failure - 0 and @error is set to extended Windows error code
; Note:          This function does not check to see if the service has started successfully
;===============================================================================
Func _StartService($sComputerName, $sServiceName)
    Local $hAdvapi32
    Local $hKernel32
    Local $arRet
    Local $hSC
    Local $hService
    Local $lError = -1

    $hAdvapi32 = DllOpen("advapi32.dll")
    If $hAdvapi32 = -1 Then Return 0
    $hKernel32 = DllOpen("kernel32.dll")
    If $hKernel32 = -1 Then Return 0
    $arRet = DllCall($hAdvapi32, "long", "OpenSCManager", _
            "str", $sComputerName, _
            "str", "ServicesActive", _
            "long", $SC_MANAGER_CONNECT)
    If $arRet[0] = 0 Then
        $arRet = DllCall($hKernel32, "long", "GetLastError")
        $lError = $arRet[0]
    Else
        $hSC = $arRet[0]
        $arRet = DllCall($hAdvapi32, "long", "OpenService", _
                "long", $hSC, _
                "str", $sServiceName, _
                "long", $SERVICE_START)
        If $arRet[0] = 0 Then
            $arRet = DllCall($hKernel32, "long", "GetLastError")
            $lError = $arRet[0]
        Else
            $hService = $arRet[0]
            $arRet = DllCall($hAdvapi32, "int", "StartService", _
                    "long", $hService, _
                    "long", 0, _
                    "str", "")
            If $arRet[0] = 0 Then
                $arRet = DllCall($hKernel32, "long", "GetLastError")
                $lError = $arRet[0]
            EndIf
            DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hService)
        EndIf
        DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hSC)
    EndIf
    DllClose($hAdvapi32)
    DllClose($hKernel32)
    If $lError <> -1 Then
        SetError($lError)
        Return 0
    EndIf
    Return 1
EndFunc   ;==>_StartService


;===============================================================================
; Description:   Stops a service on a computer
; Parameters:    $sComputerName - name of the target computer. If empty, the local computer name is used
;                $sServiceName - name of the service to stop
; Requirements:  None
; Return Values: On Success - 1
;                On Failure - 0 and @error is set to extended Windows error code
; Note:          This function does not check to see if the service has stopped successfully
;===============================================================================
Func _StopService($sComputerName, $sServiceName)
    Local $hAdvapi32
    Local $hKernel32
    Local $arRet
    Local $hSC
    Local $hService
    Local $lError = -1

    $hAdvapi32 = DllOpen("advapi32.dll")
    If $hAdvapi32 = -1 Then Return 0
    $hKernel32 = DllOpen("kernel32.dll")
    If $hKernel32 = -1 Then Return 0
    $arRet = DllCall($hAdvapi32, "long", "OpenSCManager", _
            "str", $sComputerName, _
            "str", "ServicesActive", _
            "long", $SC_MANAGER_CONNECT)
    If $arRet[0] = 0 Then
        $arRet = DllCall($hKernel32, "long", "GetLastError")
        $lError = $arRet[0]
    Else
        $hSC = $arRet[0]
        $arRet = DllCall($hAdvapi32, "long", "OpenService", _
                "long", $hSC, _
                "str", $sServiceName, _
                "long", $SERVICE_STOP)
        If $arRet[0] = 0 Then
            $arRet = DllCall($hKernel32, "long", "GetLastError")
            $lError = $arRet[0]
        Else
            $hService = $arRet[0]
            $arRet = DllCall($hAdvapi32, "int", "ControlService", _
                    "long", $hService, _
                    "long", $SERVICE_CONTROL_STOP, _
                    "str", "")
            If $arRet[0] = 0 Then
                $arRet = DllCall($hKernel32, "long", "GetLastError")
                $lError = $arRet[0]
            EndIf
            DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hService)
        EndIf
        DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hSC)
    EndIf
    DllClose($hAdvapi32)
    DllClose($hKernel32)
    If $lError <> -1 Then
        SetError($lError)
        Return 0
    EndIf
    Return 1
EndFunc   ;==>_StopService


;===============================================================================
; Description:   Checks if a service is running on a computer
; Parameters:    $sComputerName - name of the target computer. If empty, the local computer name is used
;                $sServiceName - name of the service to check
; Requirements:  None
; Return Values: On Success - 1
;                On Failure - 0
; Note:          This function relies on the fact that only a running service responds
;                to a SERVICE_CONTROL_INTERROGATE control code. Check the ControlService
;                page on MSDN for limitations with using this method.
;===============================================================================
Func _ServiceRunning($sComputerName, $sServiceName)
    Local $hAdvapi32
    Local $arRet
    Local $hSC
    Local $hService
    Local $bRunning = 0

    $hAdvapi32 = DllOpen("advapi32.dll")
    If $hAdvapi32 = -1 Then Return 0
    $arRet = DllCall($hAdvapi32, "long", "OpenSCManager", _
            "str", $sComputerName, _
            "str", "ServicesActive", _
            "long", $SC_MANAGER_CONNECT)
    If $arRet[0] <> 0 Then
        $hSC = $arRet[0]
        $arRet = DllCall($hAdvapi32, "long", "OpenService", _
                "long", $hSC, _
                "str", $sServiceName, _
                "long", $SERVICE_INTERROGATE)
        If $arRet[0] <> 0 Then
            $hService = $arRet[0]
            $arRet = DllCall($hAdvapi32, "int", "ControlService", _
                    "long", $hService, _
                    "long", $SERVICE_CONTROL_INTERROGATE, _
                    "str", "")
            $bRunning = $arRet[0]
            DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hService)
        EndIf
        DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hSC)
    EndIf
    DllClose($hAdvapi32)
    Return $bRunning
EndFunc   ;==>_ServiceRunning


Func Terminate()
    Exit
EndFunc   ;==>Terminate
~hope this helps~ Edited by herewasplato

[size="1"][font="Arial"].[u].[/u][/font][/size]

Share this post


Link to post
Share on other sites



Because of this post:

http://www.autoitscript.com/forum/index.php?showtopic=90184

;Only tested on XP
AutoItSetOption("WinWaitDelay", 1) ;(milliseconds)
AutoItSetOption("TrayIconDebug", 1) ;0-off
AutoItSetOption("WinTitleMatchMode", 2) ;1-from the start, 2-any substring, 3-exact match
HotKeySet("{ESC}", "Terminate")

;set this to 0 to turn off the TrayTips and debug sleeps
Global $Debug_Sleep = 5000 ;(milliseconds)
;set it to something like 5000 if you want to read the script's TrayTips and glance at the windows
;you may have to manually close the TrayTip(s) generated by the wireless NIC itself
;to be able to see the ones made by the script


Global $SSID = "YourSSID"
Global $Authentication_Method = "WPA-PSK"
Global $Encryption_Method = "TKIP"
Global $Network_Key = "12345678"
Global $WinTitle, $WinText, $WinTimeout, $hwnd


;on my laptop
;if the wireless network interface card has been disabled, then the tab named "Wireless Networks"...
;... will not be present in the "Wireless Network Connection Properties" window
;the script attempts to deal with that


;on my laptop
;if the Wireless Zero Configuration service is not running, then the tab named "Wireless Networks"...
;... will not be present in the "Wireless Network Connection Properties" window
;the script attempts to deal with that


;Also, the connection might not be named "Wireless Network Connection"
;the script attempts to deal with that
;by only looking for the word "Properties" in the NIC's "Properties" window
;but wireless has to be somewhere in the connection's name <<<<<<<<<<<<<<<<<<<<<<<<<<<<<


;one option around not needing wireless in the connection's name
;would be to enable all NICs,
;press ENTER on each NIC entry
;if a status window appears AND text like "View Wireless Networks"
;then you might have the NIC of interest.
;and then there are users like me that have two wireless NICS............


;the worst scenario for this script is:
;Wireless Zero Configuration service stopped
;Wireless Zero Configuration service disabled
;wireless NIC disabled
;radio off on the wireless NIC


;the script attempts to handle all but the radio being off
;on my laptop - the configuration was able to complete with the radio off <<<<<<<<<<<<<<<<<<<<
;but the combination of all of the other things means that the
;tab named "Wireless Networks" is very slow to appear
;in the NIC's "Properties" window
;you may see that properties window appear and disappear repeatedly
;while the script keeps checking for that tab.


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;constants for the ServiceControl UDF
;Author: SumTingWong aka pacman ???
;http://www.autoitscript.com/forum/index.php?showtopic=6487
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Global $STANDARD_RIGHTS_REQUIRED = 0x000F0000

; Service Control Manager access types
Global $SC_MANAGER_CONNECT = 0x0001
Global $SC_MANAGER_CREATE_SERVICE = 0x0002
Global $SC_MANAGER_ENUMERATE_SERVICE = 0x0004
Global $SC_MANAGER_LOCK = 0x0008
Global $SC_MANAGER_QUERY_LOCK_STATUS = 0x0010
Global $SC_MANAGER_MODIFY_BOOT_CONFIG = 0x0020

Global $SC_MANAGER_ALL_ACCESS = BitOR($STANDARD_RIGHTS_REQUIRED, _
        $SC_MANAGER_CONNECT, _
        $SC_MANAGER_CREATE_SERVICE, _
        $SC_MANAGER_ENUMERATE_SERVICE, _
        $SC_MANAGER_LOCK, _
        $SC_MANAGER_QUERY_LOCK_STATUS, _
        $SC_MANAGER_MODIFY_BOOT_CONFIG)

; Service access types
Global $SERVICE_QUERY_CONFIG = 0x0001
Global $SERVICE_CHANGE_CONFIG = 0x0002
Global $SERVICE_QUERY_STATUS = 0x0004
Global $SERVICE_ENUMERATE_DEPENDENTS = 0x0008
Global $SERVICE_START = 0x0010
Global $SERVICE_STOP = 0x0020
Global $SERVICE_PAUSE_CONTINUE = 0x0040
Global $SERVICE_INTERROGATE = 0x0080
Global $SERVICE_USER_DEFINED_CONTROL = 0x0100

Global $SERVICE_ALL_ACCESS = BitOR($STANDARD_RIGHTS_REQUIRED, _
        $SERVICE_QUERY_CONFIG, _
        $SERVICE_CHANGE_CONFIG, _
        $SERVICE_QUERY_STATUS, _
        $SERVICE_ENUMERATE_DEPENDENTS, _
        $SERVICE_START, _
        $SERVICE_STOP, _
        $SERVICE_PAUSE_CONTINUE, _
        $SERVICE_INTERROGATE, _
        $SERVICE_USER_DEFINED_CONTROL)

; Service controls
Global $SERVICE_CONTROL_STOP = 0x00000001
Global $SERVICE_CONTROL_PAUSE = 0x00000002
Global $SERVICE_CONTROL_CONTINUE = 0x00000003
Global $SERVICE_CONTROL_INTERROGATE = 0x00000004
Global $SERVICE_CONTROL_SHUTDOWN = 0x00000005
Global $SERVICE_CONTROL_PARAMCHANGE = 0x00000006
Global $SERVICE_CONTROL_NETBINDADD = 0x00000007
Global $SERVICE_CONTROL_NETBINDREMOVE = 0x00000008
Global $SERVICE_CONTROL_NETBINDENABLE = 0x00000009
Global $SERVICE_CONTROL_NETBINDDISABLE = 0x0000000A
Global $SERVICE_CONTROL_DEVICEEVENT = 0x0000000B
Global $SERVICE_CONTROL_HARDWAREPROFILECHANGE = 0x0000000C
Global $SERVICE_CONTROL_POWEREVENT = 0x0000000D
Global $SERVICE_CONTROL_SESSIonchange = 0x0000000E

; Service types
Global $SERVICE_KERNEL_DRIVER = 0x00000001
Global $SERVICE_FILE_SYSTEM_DRIVER = 0x00000002
Global $SERVICE_ADAPTER = 0x00000004
Global $SERVICE_RECOGNIZER_DRIVER = 0x00000008
Global $SERVICE_DRIVER = BitOR($SERVICE_KERNEL_DRIVER, _
        $SERVICE_FILE_SYSTEM_DRIVER, _
        $SERVICE_RECOGNIZER_DRIVER)
Global $SERVICE_WIN32_OWN_PROCESS = 0x00000010
Global $SERVICE_WIN32_SHARE_PROCESS = 0x00000020
Global $SERVICE_WIN32 = BitOR($SERVICE_WIN32_OWN_PROCESS, _
        $SERVICE_WIN32_SHARE_PROCESS)
Global $SERVICE_INTERACTIVE_PROCESS = 0x00000100
Global $SERVICE_TYPE_ALL = BitOR($SERVICE_WIN32, _
        $SERVICE_ADAPTER, _
        $SERVICE_DRIVER, _
        $SERVICE_INTERACTIVE_PROCESS)

; Service start types
Global $SERVICE_BOOT_START = 0x00000000
Global $SERVICE_SYSTEM_START = 0x00000001
Global $SERVICE_AUTO_START = 0x00000002
Global $SERVICE_DEMAND_START = 0x00000003
Global $SERVICE_DISABLED = 0x00000004

; Service error control
Global $SERVICE_ERROR_IGNORE = 0x00000000
Global $SERVICE_ERROR_NORMAL = 0x00000001
Global $SERVICE_ERROR_SEVERE = 0x00000002
Global $SERVICE_ERROR_CRITICAL = 0x00000003
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


;for debugging;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Do ;
;    _StopService("", "WZCSVC")
;    Sleep(100)
;Until Not _ServiceRunning("", "WZCSVC")
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

If $Debug_Sleep > 0 Then TrayTip("Checking to see if...", "...the ""Wireless Zero Configuration"" service is running.", 100)
;if the service has been disabled - then this should fix that
RunWait("sc config WZCSVC start= auto", "", @SW_HIDE)
;if WZCSVC was already set to automatic - the code above won't hurt that
;if WZCSVC was already running - the code above won't hurt that
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)
If Not _ServiceRunning("", "WZCSVC") Then
    If $Debug_Sleep > 0 Then TrayTip("Attempting...", "...to start the ""Wireless Zero Configuration"" service.", 100)
    ;now the service should start unless it is completely hosed
    For $i = 1 To 10
        _StartService("", "WZCSVC")
        Sleep(3000)
        If _ServiceRunning("", "WZCSVC") Then ExitLoop
    Next
    If Not _ServiceRunning("", "WZCSVC") Then
        MsgBox(0, "AutoIt", "The Wireless Zero Configuration service could not be started.")
        Exit
    EndIf
EndIf
If $Debug_Sleep > 0 Then
    Sleep($Debug_Sleep)
    TrayTip("Its ALIVE!!!...", "...the ""Wireless Zero Configuration"" service is running.", 100)
    Sleep($Debug_Sleep)
EndIf


If $Debug_Sleep > 0 Then
    TrayTip("Opening the Network Connections explorer window...", "...and ""looking"" for the word wireless.", 100)
    Sleep($Debug_Sleep)
EndIf
Run("control ncpa.cpl")
$hwnd = _Window_Check("Network Connections", "Network Connections", 10)
If Not ControlSend($hwnd, "Network Connections", "SysListView321", "wireless") Then
    MsgBox(0, "AutoIt", "Control could not be found.")
    Exit
EndIf
$ret1 = ControlListView($hwnd, "Network Connections", "SysListView321", "GetSelected")
$ret2 = ControlListView($hwnd, "Network Connections", "SysListView321", "GetText", $ret1)
If StringInStr($ret2, "wireless") = 0 Then
    MsgBox(0, "AutoIt", "No connection named with ""wireless"" in its name could be found.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


;netsh did not work here when I tried to enable a disabled NIC
;http://support.microsoft.com/kb/262265
;the WMI service is off - so this seemed to be the simplest way
;since the window was open any way......
If $Debug_Sleep > 0 Then
    TrayTip("Enabling - if need be...", "...the first wireless connection entry located.", 100)
    Sleep($Debug_Sleep)
EndIf
For $i = 1 To 30
    If $i = 29 Then
        MsgBox(0, "AutoIt", "This does not appear to be a ""wireless"" card after all.")
        Exit
    EndIf
    ;this ENTER should either enable the NIC
    ;or bring up the status window
    ;or bring up the window that lets you choose a wireless network - if the radio is off
    ;or ???
    ControlSend($hwnd, "Network Connections", "SysListView321", "wireless")
    ControlSend($hwnd, "Network Connections", "SysListView321", "{ENTER}")
    If WinWait("", "Enabl", 1) Then ExitLoop ;catch Enabling... or Enabled
    If WinWait("Status", "View Wireless Networks", 1) Then ExitLoop
    If WinWait("", "Choose a wireless network", 1) Then ExitLoop
Next
WinClose("Status", "View Wireless Networks")
WinClose("", "Choose a wireless network")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Opening...", "...the ""Properties"" of first wireless connection entry located.", 100)
    Sleep($Debug_Sleep)
EndIf
For $i = 1 To 30
    If $i = 29 Then
        MsgBox(0, "AutoIt", "The Wireless Zero Configuration service does not seem to be ready to be configured. Run the program again.")
        Exit
    EndIf
    ;this control was found in the code above - probably don't need error checking for the control here
    ControlSend("Network Connections", "Network Connections", "SysListView321", "!{ENTER}") ;brings up the properties
    Sleep(1000)
    ;if the "Wireless Networks" tab is missing, then keep looping
    If WinExists("Properties", "General") Then
        ControlCommand("Properties", "General", "SysTabControl321", "TabRight", "")
        Sleep(500)
        If WinExists("Properties", "Wireless Networks") Then
            $hwnd = WinGetHandle("Properties", "Wireless Networks") ;take the $hwnd into the next blocks of code
            ExitLoop
        Else
            WinClose("Properties")
        EndIf
    EndIf
Next
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


;if the "Wireless Zero Configuration" service had been stopped,
;it might take a while for this radio button to be enabled
For $i = 1 To 1000
    If $Debug_Sleep > 0 Then TrayTip("Waiting...", "...for the ""Wireless Zero Configuration"" service to be ready.", 100)
    If ControlCommand($hwnd, "Wireless Networks", "Button1", "IsEnabled", "") Then ExitLoop
    Sleep(100)
    If $i = 99 Then
        MsgBox(0, "AutoIt", "The option to check the ""Use Windows to configure my wireless network settings"" is not enabled.")
        Exit
    EndIf
Next
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Putting a check by - if need be...", "...""Use Windows to configure my wireless network settings""", 100)
    Sleep($Debug_Sleep)
EndIf
;the next line will only check the radio button
;it does not toggle the state to unchecked if it was already checked
ControlCommand($hwnd, "Wireless Networks", "Button1", "Check", "")
If Not ControlCommand($hwnd, "Wireless Networks", "Button1", "IsChecked", "") Then
    MsgBox(0, "AutoIt", """Use Windows to configure my wireless network settings"" was not checked.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""Add..."".", 100)
    Sleep($Debug_Sleep)
EndIf
ControlFocus($hwnd, "Wireless Networks", "Button7")
If Not ControlClick($hwnd, "Wireless Networks", "Button7") Then
    MsgBox(0, "AutoIt", "Control could not be found.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Entering...", "...the ""Network name (SSID)"".", 100)
    Sleep($Debug_Sleep)
EndIf
$hwnd = _Window_Check("Wireless network properties", "Wireless network key", 10)
If Not ControlSetText($hwnd, "Association", "Edit1", $SSID) Then
    MsgBox(0, "AutoIt", "Control could not be found.")
    Exit
Else
    If Not ControlGetText($hwnd, "Association", "Edit1") == $SSID Then
        MsgBox(0, "AutoIt", "The SSID text was not set properly.")
        Exit
    EndIf
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Putting a check by - if need be...", "...""Connect even if this network is not broadcasting"".", 100)
    Sleep($Debug_Sleep)
EndIf
;the next line will only check the radio button
;it does not toggle the state to unchecked if it was already checked
ControlCommand($hwnd, "Wireless network key", "Button1", "Check", "")
For $i = 1 To 100
    Sleep(100)
    If ControlCommand($hwnd, "Wireless network key", "Button1", "IsChecked", "") Then ExitLoop
Next
If Not ControlCommand($hwnd, "Wireless network key", "Button1", "IsChecked", "") Then
    MsgBox(0, "AutoIt", """Connect even if this network is not broadcasting"" was not checked.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Selecting...", "...the ""Network Authentication"" method.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlCommand($hwnd, "Wireless network key", "ComboBox1", "SelectString", $Authentication_Method)
If Not ControlCommand($hwnd, "Wireless network key", "ComboBox1", "GetCurrentSelection", "") == $Authentication_Method Then
    MsgBox(0, "AutoIt", "The authentication method was not set properly.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Selecting...", "...the ""Data encryption"" method.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlCommand($hwnd, "Wireless network key", "ComboBox2", "SelectString", $Encryption_Method)
If Not ControlCommand($hwnd, "Wireless network key", "ComboBox2", "GetCurrentSelection", "") == $Encryption_Method Then
    MsgBox(0, "AutoIt", "The encryption method was not set properly.")
    Exit
EndIf
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Entering...", "...the ""Network key"" and confirming it.", 100)
    Sleep($Debug_Sleep)
EndIf
;not much error checking here
ControlSetText($hwnd, "Wireless network key", "Edit2", $Network_Key)
ControlSetText($hwnd, "Wireless network key", "Edit3", $Network_Key)
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""OK"" in the ""Wireless network properties"" window.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlClick($hwnd, "", "Button5")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""OK"" in the NIC's ""Properties"" window.", 100)
    Sleep($Debug_Sleep)
EndIf
$hwnd = _Window_Check("Properties", "Wireless Networks", 10)
ControlClick($hwnd, "Wireless Networks", "Button11")
WinWaitClose($hwnd)
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


If $Debug_Sleep > 0 Then
    TrayTip("Closing the Network Connections explorer window...", "...and hoping that this all works.", 100)
    Sleep($Debug_Sleep)
EndIf
WinClose("Network Connections")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)


Func _Window_Check($WinTitle, $WinText, $WinTimeout)
    If WinWait($WinTitle, $WinText, $WinTimeout) = 0 Then
        MsgBox(0, "AutoIt", "The window named " & $WinTitle & " with the text " & $WinText & " did not open in time.")
        Exit
    EndIf

    If WinActivate($WinTitle, $WinText) = 0 Then
        MsgBox(0, "AutoIt", "The window named " & $WinTitle & " with the text " & $WinText & " can not be found or cannot be activated.")
        Exit
    EndIf

    If WinWaitActive($WinTitle, $WinText, $WinTimeout) = 0 Then
        MsgBox(0, "AutoIt", "The window named " & $WinTitle & " with the text " & $WinText & " did not activate in time.")
        Exit
    EndIf

    $hwnd = WinGetHandle($WinTitle, $WinText)
    If $hwnd = "" Then
        MsgBox(0, "AutoIt", "Could not get the window handle for the window named " & $WinTitle & " with the text " & $WinText & ".")
        Exit
    Else
        Return $hwnd
    EndIf
EndFunc   ;==>_Window_Check


;===============================================================================
; Description:   Starts a service on a computer
; Parameters:    $sComputerName - name of the target computer. If empty, the local computer name is used
;                $sServiceName - name of the service to start
; Requirements:  None
; Return Values: On Success - 1
;                On Failure - 0 and @error is set to extended Windows error code
; Note:          This function does not check to see if the service has started successfully
;===============================================================================
Func _StartService($sComputerName, $sServiceName)
    Local $hAdvapi32
    Local $hKernel32
    Local $arRet
    Local $hSC
    Local $hService
    Local $lError = -1

    $hAdvapi32 = DllOpen("advapi32.dll")
    If $hAdvapi32 = -1 Then Return 0
    $hKernel32 = DllOpen("kernel32.dll")
    If $hKernel32 = -1 Then Return 0
    $arRet = DllCall($hAdvapi32, "long", "OpenSCManager", _
            "str", $sComputerName, _
            "str", "ServicesActive", _
            "long", $SC_MANAGER_CONNECT)
    If $arRet[0] = 0 Then
        $arRet = DllCall($hKernel32, "long", "GetLastError")
        $lError = $arRet[0]
    Else
        $hSC = $arRet[0]
        $arRet = DllCall($hAdvapi32, "long", "OpenService", _
                "long", $hSC, _
                "str", $sServiceName, _
                "long", $SERVICE_START)
        If $arRet[0] = 0 Then
            $arRet = DllCall($hKernel32, "long", "GetLastError")
            $lError = $arRet[0]
        Else
            $hService = $arRet[0]
            $arRet = DllCall($hAdvapi32, "int", "StartService", _
                    "long", $hService, _
                    "long", 0, _
                    "str", "")
            If $arRet[0] = 0 Then
                $arRet = DllCall($hKernel32, "long", "GetLastError")
                $lError = $arRet[0]
            EndIf
            DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hService)
        EndIf
        DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hSC)
    EndIf
    DllClose($hAdvapi32)
    DllClose($hKernel32)
    If $lError <> -1 Then
        SetError($lError)
        Return 0
    EndIf
    Return 1
EndFunc   ;==>_StartService


;===============================================================================
; Description:   Stops a service on a computer
; Parameters:    $sComputerName - name of the target computer. If empty, the local computer name is used
;                $sServiceName - name of the service to stop
; Requirements:  None
; Return Values: On Success - 1
;                On Failure - 0 and @error is set to extended Windows error code
; Note:          This function does not check to see if the service has stopped successfully
;===============================================================================
Func _StopService($sComputerName, $sServiceName)
    Local $hAdvapi32
    Local $hKernel32
    Local $arRet
    Local $hSC
    Local $hService
    Local $lError = -1

    $hAdvapi32 = DllOpen("advapi32.dll")
    If $hAdvapi32 = -1 Then Return 0
    $hKernel32 = DllOpen("kernel32.dll")
    If $hKernel32 = -1 Then Return 0
    $arRet = DllCall($hAdvapi32, "long", "OpenSCManager", _
            "str", $sComputerName, _
            "str", "ServicesActive", _
            "long", $SC_MANAGER_CONNECT)
    If $arRet[0] = 0 Then
        $arRet = DllCall($hKernel32, "long", "GetLastError")
        $lError = $arRet[0]
    Else
        $hSC = $arRet[0]
        $arRet = DllCall($hAdvapi32, "long", "OpenService", _
                "long", $hSC, _
                "str", $sServiceName, _
                "long", $SERVICE_STOP)
        If $arRet[0] = 0 Then
            $arRet = DllCall($hKernel32, "long", "GetLastError")
            $lError = $arRet[0]
        Else
            $hService = $arRet[0]
            $arRet = DllCall($hAdvapi32, "int", "ControlService", _
                    "long", $hService, _
                    "long", $SERVICE_CONTROL_STOP, _
                    "str", "")
            If $arRet[0] = 0 Then
                $arRet = DllCall($hKernel32, "long", "GetLastError")
                $lError = $arRet[0]
            EndIf
            DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hService)
        EndIf
        DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hSC)
    EndIf
    DllClose($hAdvapi32)
    DllClose($hKernel32)
    If $lError <> -1 Then
        SetError($lError)
        Return 0
    EndIf
    Return 1
EndFunc   ;==>_StopService


;===============================================================================
; Description:   Checks if a service is running on a computer
; Parameters:    $sComputerName - name of the target computer. If empty, the local computer name is used
;                $sServiceName - name of the service to check
; Requirements:  None
; Return Values: On Success - 1
;                On Failure - 0
; Note:          This function relies on the fact that only a running service responds
;                to a SERVICE_CONTROL_INTERROGATE control code. Check the ControlService
;                page on MSDN for limitations with using this method.
;===============================================================================
Func _ServiceRunning($sComputerName, $sServiceName)
    Local $hAdvapi32
    Local $arRet
    Local $hSC
    Local $hService
    Local $bRunning = 0

    $hAdvapi32 = DllOpen("advapi32.dll")
    If $hAdvapi32 = -1 Then Return 0
    $arRet = DllCall($hAdvapi32, "long", "OpenSCManager", _
            "str", $sComputerName, _
            "str", "ServicesActive", _
            "long", $SC_MANAGER_CONNECT)
    If $arRet[0] <> 0 Then
        $hSC = $arRet[0]
        $arRet = DllCall($hAdvapi32, "long", "OpenService", _
                "long", $hSC, _
                "str", $sServiceName, _
                "long", $SERVICE_INTERROGATE)
        If $arRet[0] <> 0 Then
            $hService = $arRet[0]
            $arRet = DllCall($hAdvapi32, "int", "ControlService", _
                    "long", $hService, _
                    "long", $SERVICE_CONTROL_INTERROGATE, _
                    "str", "")
            $bRunning = $arRet[0]
            DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hService)
        EndIf
        DllCall($hAdvapi32, "int", "CloseServiceHandle", "long", $hSC)
    EndIf
    DllClose($hAdvapi32)
    Return $bRunning
EndFunc   ;==>_ServiceRunning


Func Terminate()
    Exit
EndFunc   ;==>Terminate
~hope this helps~
I needed to change a 5 to a 4 and it worked great.

NOW:

If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""OK"" in the ""Wireless network properties"" window.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlClick($hwnd, "", "Button4")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)

Previous:

If $Debug_Sleep > 0 Then
    TrayTip("Clicking...", "...on ""OK"" in the ""Wireless network properties"" window.", 100)
    Sleep($Debug_Sleep)
EndIf
ControlClick($hwnd, "", "Button5")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)

Share this post


Link to post
Share on other sites

I needed to change a 5 to a 4 and it worked great.

Which is why people don't script this GUI too often. But it will do for me and maybe all of my rambling comments in the code will help others think thru what they need to do for their own version.

What operating system are you running this on?


[size="1"][font="Arial"].[u].[/u][/font][/size]

Share this post


Link to post
Share on other sites

via PM...

I am currently using XP Tablet Edition W/SP2 and have also tested on XP Pro SP2 and both worked fine with the button 4.


[size="1"][font="Arial"].[u].[/u][/font][/size]

Share this post


Link to post
Share on other sites

Sorry for the thread necromancy, but I have a question: Can anyone help me with adding a little snippet of code which unchecks the "The key is provided to me automatically" checkbox?

From my experience, the script works fantastically except that one, tiny thing. Because of that, the wireless won't connect even though the WEP key is input correctly and all of the other settings are OK. Once I uncheck the "key is provided to me automatically" box, the wireless connects with no problems.

Thank you for any help. :-)

Share this post


Link to post
Share on other sites

#6 ·  Posted (edited)

Win XP PRO sp3

I also had to change to button5.

Works pretty good thank you.

Questions

1. Is there anyway to speed this up so it happens much faster? --- Found it by setting--- Global $Debug_Sleep = 0

2. Is there anyway to hide all of this when running?

Edited by lawson23

Share this post


Link to post
Share on other sites

#7 ·  Posted (edited)

Sorry for the thread necromancy, but I have a question: Can anyone help me with adding a little snippet of code which unchecks the "The key is provided to me automatically" checkbox?

From my experience, the script works fantastically except that one, tiny thing. Because of that, the wireless won't connect even though the WEP key is input correctly and all of the other settings are OK. Once I uncheck the "key is provided to me automatically" box, the wireless connects with no problems.

Thank you for any help. :-)

doesn't this have to be unchecked in order to enter the key? It must be getting checked later in the script. I think I can help you with this but need more information.

putting this after selecting the Data Encryption entry point should (untested code) do the job:

If $Debug_Sleep > 0 Then
    TrayTip("unchecking...", "The key is provided for me automatically", 10)
    Sleep($Debug_Sleep)
EndIf
ControlClick($hwnd, "", "Button3")
If $Debug_Sleep > 0 Then Sleep($Debug_Sleep)
Edited by lawson23

Share this post


Link to post
Share on other sites

One problem I have not sure if anyone else has this or not is from time to time like out of 10 tries this will happen once.

Autoit will come up and say:

"The window named network connections with the text Network Connections did not open in time."

But the window is there and open. I'm sure it is like a split second miss. Is there anyway to adjust this "in time" value in your script?

Share this post


Link to post
Share on other sites

The Wireless Zero Configuration service could not be started?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0