iamtheky Posted February 7, 2011 Share Posted February 7, 2011 (edited) I would like the index and the number of spaces preceding text to be equal. This is as close as I am as of yet, but it still only executes the regexpreplace once per line. thanks #include <Array.au3> $sText = "CountDown" $Atext = stringsplit ($sText , '' , 2) _ArrayDisplay ($Atext) for $n = 1 to ubound ($Atext) - 1 $Atext[$n] = stringregexpreplace ($Atext[$n] , '(\A)' , " " , $n) _ArrayDisplay ($Atext) Next Edited February 7, 2011 by iamtheky ,-. .--. ________ .-. .-. ,---. ,-. .-. .-. .-. |(| / /\ \ |\ /| |__ __||| | | || .-' | |/ / \ \_/ )/ (_) / /__\ \ |(\ / | )| | | `-' | | `-. | | / __ \ (_) | | | __ | (_)\/ | (_) | | .-. | | .-' | | \ |__| ) ( | | | | |)| | \ / | | | | | |)| | `--. | |) \ | | `-' |_| (_) | |\/| | `-' /( (_)/( __.' |((_)-' /(_| '-' '-' (__) (__) (_) (__) Link to comment Share on other sites More sharing options...
autoitter Posted February 7, 2011 Share Posted February 7, 2011 (edited) You mean something like this? #include <Array.au3> $sText = "CountDown" $Atext = StringSplit($sText, '', 2) _ArrayDisplay($Atext) For $n = 1 To UBound($Atext) - 1 $Atext[$n] = _Spaces($n) & $Atext[$n] Next _ArrayDisplay($Atext) Func _Spaces($nCount) Local $strResult = "" For $i = 1 To $nCount $strResult &= " " Next Return $strResult EndFunc Edit: removed StringRegExpReplace Edited February 7, 2011 by autoitter Link to comment Share on other sites More sharing options...
BrewManNH Posted February 7, 2011 Share Posted February 7, 2011 I think this is what you're looking for: #include <Array.au3> $sText = "CountDown" $Atext = StringSplit($sText, '', 2) _ArrayDisplay($Atext) For $n = 1 To UBound($Atext) - 1 $Spaces = "" For $x = 1 To $n $Spaces &= " " Next $Atext[$n] = $Spaces & $Atext[$n] _ArrayDisplay($Atext) Next Can't say why the regexp doesn't work because I don't know enough about them to say for sure. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
iamtheky Posted February 7, 2011 Author Share Posted February 7, 2011 (edited) Thanks. The result of the efforts is colored text on M23s EMB_Countdown.ExtMsgBoxTimeoutCOLORED.au3expandcollapse popup#include-once ; #INDEX# ============================================================================================================ ; Title .........: ExtMsgBox ; AutoIt Version : v3.2.12.1 or higher ; Language ......: English ; Description ...: Generates user defined message boxes centred on an owner, on screen or at defined coordinates ; Remarks .......: ; Note ..........: ; Author(s) .....: Melba23, based on some original code by photonbuddy & YellowLab, and KaFu (default font data) ; ==================================================================================================================== ;#AutoIt3Wrapper_au3check_parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 ; #INCLUDES# ========================================================================================================= #include <StringSize.au3> #include <Array.au3> ; #GLOBAL CONSTANTS# ================================================================================================= Global Const $MB_IConstop = 16 ; Stop-sign icon Global Const $MB_ICONQUERY = 32 ; Question-mark icon Global Const $MB_ICONEXCLAM = 48 ; Exclamation-point icon Global Const $MB_ICONINFO = 64 ; Icon consisting of an 'i' in a circle ; #GLOBAL VARIABLES# ================================================================================================= ; Default settings Global $aEMB_FontData = _GetDefaultEMBFont() Global $iDef_EMB_Font_Size = $aEMB_FontData[0] Global $sDef_EMB_Font_Name = $aEMB_FontData[1] $aEMB_FontData = 0 Global $iDef_EMB_BkCol = DllCall("User32.dll", "int", "GetSysColor", "int", 15) ; $COLOR_3DFACE = 15 $iDef_EMB_BkCol = $iDef_EMB_BkCol[0] Global $iDef_EMB_Col = DllCall("User32.dll", "int", "GetSysColor", "int", 8) ; $COLOR_WINDOWTEXT = 8 $iDef_EMB_Col = $iDef_EMB_Col[0] ; Current settings Global $iEMB_Style = 0 Global $iEMB_Just = 0 Global $iEMB_BkCol = $iDef_EMB_BkCol Global $iEMB_Col = random(0xFF0000 , 0xFFFFFF) Global $sEMB_Font_Name = $sDef_EMB_Font_Name Global $iEMB_Font_Size = $iDef_EMB_Font_Size ; #CURRENT# ========================================================================================================== ; _ExtMsgBoxSet: Sets the GUI style, justification, colours and font for subsequent _ExtMsgBox function calls ; _ExtMsgBox: Generates user defined message boxes centred on an owner, on screen or at defined coordinates ; ==================================================================================================================== ; #INTERNAL_USE_ONLY#================================================================================================= ; _GetDefaultEMBFont: Determines Windows default MsgBox font size and name ; ==================================================================================================================== ; #FUNCTION# ========================================================================================================= ; Name...........: _ExtMsgBoxSet ; Description ...: Sets the GUI style, justification, colours and font for subsequent _ExtMsgBox function calls ; Syntax.........: _ExtMsgBoxSet($iStyle, $iJust, [$iBkCol, [$iCol, [$sFont_Size, [$iFont_Name]]]]) ; Parameters ....: $iStyle -> 0 (Default) - Button on TaskBar, TOPMOST style set, button use selected font. ; Combine following to change: ; 1 = Button does not appear on TaskBar ; 2 = TOPMOST Style not set ; 4 = Buttons use default font ; >>>>>>>>>> Setting this parameter to 'Default' will reset ALL parameters to default values <<<< ; $iJust -> 0 = Left justified (Default), 1 = Centred , 2 = Right justified ; + 4 = Centred single button. Note: multiple buttons are always centred ; ($SS_LEFT, $SS_CENTER, $SS_RIGHT can also be used) ; $iBkCol -> The colour for the message box background. Default = system colour ; $iCol -> The colour for the message box text. Default = system colour ; Omitting a colour parameter or setting -1 leaves it unchanged ; Setting a colour parameter to Default resets the system message box colour ; $iFont_Size -> The font size in points to use for the message box. Default = system font size ; $sFont_Name -> The font to use for the message box. Default = system font ; Omitting a font parameter or setting font size to -1 or font name to "" = unchanged ; Setting a font parameter to Default resets the system message box font and size ; Requirement(s).: v3.2.12.1 or higher ; Return values .: Success - Returns 1 ; Failure - Returns 0 and sets @error to 1 with @extended set to parameter index number ; Remarks .......; ; Author ........: Melba23 ; Example........; Yes ;===================================================================================================================== Func _ExtMsgBoxSet($iStyle = 0, $iJust = 0, $iBkCol = -1, $iCol = -1, $iFont_Size = -1, $sFont_Name = "") ; Set global EMB variables to required values Switch $iStyle Case Default $iEMB_Style = 0 ; Button on TaskBar and $WS_EX_TOPMOST $iEMB_Just = 0 ; $SS_LEFT $iEMB_BkCol = $iDef_EMB_BkCol $iEMB_Col = random(0xFF0000 , 0xFFFFFF) $sEMB_Font_Name = $sDef_EMB_Font_Name $iEMB_Font_Size = $iDef_EMB_Font_Size Return Case 0 To 7 $iEMB_Style = $iStyle Case Else Return SetError(1, 1, 0) EndSwitch Switch $iJust Case 0, 1, 2, 4, 5, 6 $iEMB_Just = $iJust Case Else Return SetError(1, 2, 0) EndSwitch Switch $iBkCol Case Default $iEMB_BkCol = $iDef_EMB_BkCol Case -1 ; Do nothing Case 0 To 0xFFFFFF $iEMB_BkCol = $iDef_EMB_BkCol Case Else Return SetError(1, 3, 0) EndSwitch Switch $iCol Case Default $iEMB_Col = random(0xFF0000 , 0xFFFFFF) Case -1 ; Do nothing Case 0 To 0xFFFFFF $iEMB_Col = random(0xFF0000 , 0xFFFFFF) Case Else Return SetError(1, 4, 0) EndSwitch Switch $iFont_Size Case Default $iEMB_Font_Size = $iDef_EMB_Font_Size Case 8 To 72 $iEMB_Font_Size = Int($iFont_Size) Case -1 ; Do nothing Case Else Return SetError(1, 5, 0) EndSwitch Switch $sFont_Name Case Default $sEMB_Font_Name = $sDef_EMB_Font_Name Case "" ; Do nothing Case Else If IsString($sFont_Name) Then $sEMB_Font_Name = $sFont_Name Else Return SetError(1, 6, 0) EndIf EndSwitch Return 1 EndFunc ; #FUNCTION# ========================================================================================================= ; Name...........: _ExtMsgBox ; Description ...: Generates user defined message boxes centred on an owner, on screen or at defined coordinates ; Syntax.........: _ExtMsgBox ($vIcon, $vButton, $sTitle, $sText, [$iTimeout, [$hWin, [$iVPos]]]) ; Parameters ....: $vIcon -> The icon to use: 0 - No icon, 8 - UAC, or a $MB_ICON constant as follows ; 16 - Stop, 32 - Query, 48 - Exclamation, 64 - Information ; 128 - Countdown if $iTimeout set ; Any other numeric value returns -1, error 1 ; If set to the name of an exe, the main icon of that exe will be displayed ; If set to the name of an icon, the icon will be displayed ; $vButton -> Button text separated with "|" character. ; An ampersand (&) before the text indicates the default button. ; Two focus ampersands returns -1, error 2. A single button is always default ; Pressing Enter or Space fires default button ; Can also use $MB_ button numeric constants: 0 = "OK", 1 = "&OK|Cancel", ; 2 = "&Abort|Retry|Ignore", 3 = "&Yes|No|Cancel", 4 = "&Yes|No", 5 = "&Retry|Cancel", ; 6 = "&Cancel|Try Again|Continue". Other values return -1, error 3 ; Default max width of 370 gives 1-4 buttons @ width 80, 5 @ width 60, 6 @ width 50 ; Min button width set at 50, so unless default changed 7 buttons returns -1, error 4 ; $sTitle -> The title of the message box ; $sText -> The text to be displayed. Long lines will wrap. The box depth is adjusted to fit ; The preset max width can increase to a preset absolute value if required ; $iTimeout -> Timeout delay before EMB closes. 0 = no timeout (Default) ; $hWin -> Handle of the window in which EMB is centred ; If window is hidden or no handle passed EMB centred in display (Default) ; If parameter does not hold valid window handle, it is interpreted as horizontal ; coordinate for EMB location ; $iVPos -> Vertical coordinate for EMB location, only if $hWin parameter is ; interpreted as horizontal coordinate. (Default = 0) ; Requirement(s).: v3.2.12.1 or higher ; Return values .: Success: Returns 1-based index of the button pressed, counting from the LEFT. ; Returns 0 if closed by a "CloseGUI" event (i.e. click [X] or press Escape) ; Returns 9 if timed out ; Failure: Returns -1 and sets @error as follows: ; 1 - Icon error ; 2 - Multiple default button error ; 3 - Button constant error ; 4 - Too many buttons to fit max GUI size ; 5 - StringSize error ; 6 - GUI creation error ; Remarks .......; EMB position automatically adjusted to appear on screen ; Author ........: Melba23, based on some original code by photonbuddy & YellowLab ; Example........; Yes ;===================================================================================================================== Func _ExtMsgBox($vIcon, $vButton, $sTitle, $sText, $iTimeout = 0, $hWin = "", $iVPos = 0) Local $iParent_Win = 0 Local $nOldOpt = Opt('GUIOnEventMode', 0) ; Set default sizes for message box Local $iMsg_Width_max = 370, $iMsg_Width_min = 150, $iMsg_Width_abs = 500 Local $iMsg_Height_min = 100 Local $iButton_Width_max = 80, $iButton_Width_min = 50 ; Declare local variables Local $iButton_Width_Req, $iButton_Width, $iButton_Xpos, $iRet_Value, $iHpos ;; Check for icon Local $iIcon_Style = 0 Local $iIcon_Reduction = 50 Local $sDLL = "user32.dll" If StringIsDigit($vIcon) Then Switch $vIcon Case 0 $iIcon_Reduction = 0 Case 8 $sDLL = "imageres.dll" $iIcon_Style = 78 Case 16 ; Stop $iIcon_Style = -4 Case 32 ; Query $iIcon_Style = -3 Case 48 ; Exclam $iIcon_Style = -2 Case 64 ; Info $iIcon_Style = -5 Case 128 ; Countdown If $iTimeout > 0 Then $fCountdown = True Else ContinueCase EndIf Case Else $nOldOpt = Opt('GUIOnEventMode', $nOldOpt) Return SetError(1, 0, -1) EndSwitch Else $sDLL = $vIcon $iIcon_Style = 0 EndIf ; Check if two buttons are seeking focus StringRegExpReplace($vButton, "((?<!&)&)(?!&)", "*") If @extended > 1 Then $nOldOpt = Opt('GUIOnEventMode', $nOldOpt) Return SetError(2, 0, -1) EndIf ; Check if using constants or text If IsNumber($vButton) Then Switch $vButton Case 0 $vButton = "OK" Case 1 $vButton = "&OK|Cancel" Case 2 $vButton = "&Abort|Retry|Ignore" Case 3 $vButton = "&Yes|No|Cancel" Case 4 $vButton = "&Yes|No" Case 5 $vButton = "&Retry|Cancel" Case 6 $vButton = "&Cancel|Try Again|Continue" Case Else $nOldOpt = Opt('GUIOnEventMode', $nOldOpt) Return SetError(3, 0, -1) EndSwitch EndIf ; Get message label size While 1 Local $aLabel_Pos = _StringSize($sText, $iEMB_Font_Size, Default, Default, $sEMB_Font_Name, $iMsg_Width_max - 20 - $iIcon_Reduction) If @error Then If $iMsg_Width_max = $iMsg_Width_abs Then $nOldOpt = Opt('GUIOnEventMode', $nOldOpt) Return SetError(5, 0, -1) Else $iMsg_Width_max += 10 EndIf Else ExitLoop EndIf WEnd ; Reset text to wrapped version $sText = $aLabel_Pos[0] ; Get individual button text Local $aButtons = StringSplit($vButton, "|") ; Get minimum GUI width needed for buttons Local $iMsg_Width_Button = ($iButton_Width_max + 10) * $aButtons[0] + 10 ; If shorter than min width If $iMsg_Width_Button < $iMsg_Width_min Then ; Set buttons to max size and leave box min width unchanged $iButton_Width = $iButton_Width_max Else ; Check button width needed to fit within max box width $iButton_Width_Req = ($iMsg_Width_max - (($aButtons[0] + 1) * 10)) / $aButtons[0] ; Button width less than min button width permitted If $iButton_Width_Req < $iButton_Width_min Then $nOldOpt = Opt('GUIOnEventMode', $nOldOpt) Return SetError(4, 0, -1) ; Buttons only need resizing to fit ElseIf $iButton_Width_Req < $iButton_Width_max Then ; Set box to max width and set button size as required $iMsg_Width_Button = $iMsg_Width_max $iButton_Width = $iButton_Width_Req ; Buttons can be max size Else ; Set box min width to fit buttons $iButton_Width = $iButton_Width_max $iMsg_Width_min = $iMsg_Width_Button EndIf EndIf ; Determine final button width required $iButton_Width_Req = Int((($iButton_Width + 10) * $aButtons[0]) + 10) ; Set label size Local $iLabel_Width = $aLabel_Pos[2] Local $iLabel_Height = $aLabel_Pos[3] ; Set GUI size Local $iMsg_Width = $iLabel_Width + 20 + $iIcon_Reduction ; Increase width to fit buttons if needed If $iButton_Width_Req > $iMsg_Width Then $iMsg_Width = $iButton_Width_Req If $iMsg_Width < $iMsg_Width_min Then $iMsg_Width = $iMsg_Width_min $iLabel_Width = $iMsg_Width_min - 20 EndIf Local $iMsg_Height = $iLabel_Height + 65 If $iMsg_Height < $iMsg_Height_min Then $iMsg_Height = $iMsg_Height_min ; If only single line, lower label to to centre text on icon Local $iLabel_Vert = 20 If StringInStr($sText, @CRLF) = 0 Then $iLabel_Vert = 27 ; Check for taskbar button style required If Mod($iEMB_Style, 2) = 1 Then ; Hide taskbar button so create as child If IsHWnd($hWin) Then $iParent_Win = $hWin ; Make child of that window Else $iParent_Win = WinGetHandle(AutoItWinGetTitle()) ; Make child of AutoIt window EndIf EndIf ; Determine EMB location If $hWin = "" Then ; No handle or position passed so centre on screen $iHpos = (@DesktopWidth - $iMsg_Width) / 2 $iVPos = (@DesktopHeight - $iMsg_Height) / 2 Else If IsHWnd($hWin) Then ; Get parent GUI pos if visible If BitAND(WinGetState($hWin), 2) Then ; Set EMB to centre on parent Local $aPos = WinGetPos($hWin) $iHpos = ($aPos[2] - $iMsg_Width) / 2 + $aPos[0] - 3 $iVPos = ($aPos[3] - $iMsg_Height) / 2 + $aPos[1] - 20 Else ; Set EMB to centre om screen $iHpos = (@DesktopWidth - $iMsg_Width) / 2 $iVPos = (@DesktopHeight - $iMsg_Height) / 2 EndIf Else ; Assume parameter is horizontal coord $iHpos = $hWin ; $iVpos already set EndIf EndIf ; Now check to make sure GUI is visible on screen ; First horizontally If $iHpos < 10 Then $iHpos = 10 If $iHpos + $iMsg_Width > @DesktopWidth - 20 Then $iHpos = @DesktopWidth - 20 - $iMsg_Width ; Then vertically If $iVPos < 10 Then $iVPos = 10 If $iVPos + $iMsg_Height > @DesktopHeight - 60 Then $iVPos = @DesktopHeight - 60 - $iMsg_Height ; Remove TOPMOST extended style if required Local $iExtStyle = 0x00000008 ; $WS_TOPMOST If BitAnd($iEMB_Style, 2) Then $iExtStyle = -1 ; Create GUI with $WS_POPUPWINDOW, $WS_CAPTION style and required extended style Local $hMsgGUI = GUICreate($sTitle, $iMsg_Width, $iMsg_Height, $iHpos, $iVPos, BitOR(0x80880000, 0x00C00000), $iExtStyle, $iParent_Win) If @error Then $nOldOpt = Opt('GUIOnEventMode', $nOldOpt) Return SetError(6, 0, -1) EndIf If $iEMB_BkCol <> Default Then $iEMB_BkCol = $iDef_EMB_BkCol ; Set centring parameter Local $iLabel_Style = 0 ; $SS_LEFT If BitAND($iEMB_Just, 1) = 1 Then $iLabel_Style = 1 ; $SS_CENTER ElseIf BitAND($iEMB_Just, 2) = 2 Then $iLabel_Style = 2 ; $SS_RIGHT EndIf ; Create label $Atext = StringSplit($sText, '', 2) Dim $Btext = $Atext ;~ _ArrayDisplay($Atext) ;~ _ArrayDisplay($Btext) For $n = 1 To UBound($Atext) - 1 $Spaces = "" For $x = 1 To $n $Spaces &= $Btext[$x - 1] Next $Atext[$n] = $Spaces & $Atext[$n] ;~ _ArrayDisplay($Atext) Next $Word = GUICtrlCreateLabel($sText, 10 + $iIcon_Reduction, $iLabel_Vert, $iLabel_Width, $iLabel_Height, $iLabel_Style) GUICtrlSetFont(-1, $iEMB_Font_Size, Default, Default, $sEMB_Font_Name) If $iEMB_Col <> Default Then GUICtrlSetColor(-1, random(0x000000 , 0xFFFFFF)) ; Create icon or countdown timer If $fCountdown = True Then Local $hCountdown_Label = GUICtrlCreateLabel(StringFormat("%2s", $iTimeout), 10, 20, 32, 32) GUICtrlSetFont(-1, 18, Default, Default, $sEMB_Font_Name) GUICtrlSetColor(-1, random(0xFF0000 , 0xFFFFFF)) Else If $iIcon_Reduction Then GUICtrlCreateIcon($sDLL, $iIcon_Style, 10, 20) EndIf ; Create dummy control for Accel key Local $hAccel_Key = GUICtrlCreateDummy() ; Set Space key as Accel key Local $aAccel_Key[1][2]=[["{SPACE}", $hAccel_Key]] GUISetAccelerators($aAccel_Key) ; Create buttons ; Calculate button horizontal start If $aButtons[0] = 1 Then If BitAND($iEMB_Just, 4) = 4 Then ; Single centred button $iButton_Xpos = ($iMsg_Width - $iButton_Width) / 2 Else ; Single offset button $iButton_Xpos = $iMsg_Width - $iButton_Width - 10 EndIf Else ; Multiple centred buttons $iButton_Xpos = 10 + ($iMsg_Width - $iMsg_Width_Button) / 2 EndIf ; Set default button code Local $iDefButton_Code = 1 ; Set default button style Local $iDef_Button_Style = 0 ; Work through button list For $i = 0 To $aButtons[0] - 1 Local $iButton_Text = $aButtons[$i + 1] ; Set default button If $aButtons[0] = 1 Then ; Only 1 button $iDef_Button_Style = 0x0001 ElseIf StringLeft($iButton_Text, 1) = "&" Then ; Look for & $iDef_Button_Style = 0x0001 $aButtons[$i + 1] = StringTrimLeft($iButton_Text, 1) ; Set default button code for Accel key return $iDefButton_Code = $i + 1 EndIf ; Draw button GUICtrlCreateButton($aButtons[$i + 1], $iButton_Xpos + ($i * ($iButton_Width + 10)), $iMsg_Height - 35, $iButton_Width, 25, $iDef_Button_Style) ; Set font if required If Not BitAnd($iEMB_Style, 4) Then GUICtrlSetFont(-1, $iEMB_Font_Size, 400, 0, $sEMB_Font_Name) ; Reset default style parameter $iDef_Button_Style = 0 Next ; Show GUI GUISetState(@SW_SHOW, $hMsgGUI) ; Begin timeout counter Local $iTimeout_Begin = TimerInit() Local $iCounter = 0 ; Much faster to declare GUIGetMsg return array here and not in loop Local $aMsg While 1 $aMsg = GUIGetMsg(1) If $aMsg[1] = $hMsgGUI Then Select Case $aMsg[0] = -3 ; $GUI_EVENT_CLOSE $iRet_Value = 0 ExitLoop Case $aMsg[0] = $hAccel_Key ; Accel key pressed so return default button code $iRet_Value = $iDefButton_Code ExitLoop Case $aMsg[0] > $hAccel_Key ; Button handle minus Accel key handle will give button index $iRet_Value = $aMsg[0] - $hAccel_Key ExitLoop EndSelect EndIf ; Timeout if required If TimerDiff($iTimeout_Begin) / 1000 >= $iTimeout And $iTimeout > 0 Then $iRet_Value = 9 ExitLoop EndIf ; Show countdown if required If $fCountdown = True Then Local $iTimeRun = Int(TimerDiff($iTimeout_Begin) /1000) If $iTimeRun <> $iCounter Then $iCounter = $iTimeRun GUICtrlSetData($hCountdown_Label, StringFormat("%2s", $iTimeout - $iCounter)) GUICtrlSetColor ($hCountdown_Label , random (0x000000 , 0xFFFFFF)) GUICtrlSetColor ($Word , random (0x000000 , 0xFFFFFF)) for $i = 0 to ubound ($Atext) - 1 GUICtrlSetData($Word , $Atext[$i]) GUICtrlSetColor ($Word , random (0x000000 , 0xFFFFFF)) sleep (100) next EndIf EndIf WEnd $nOldOpt = Opt('GUIOnEventMode', $nOldOpt) GUIDelete($hMsgGUI) Return $iRet_Value EndFunc ;==>_ExtMsgBox ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GetDefaultEMBFont ; Description ...: Determines Windows default MsgBox font size and name ; Syntax.........: _GetDefaultEMBFont() ; Return values .: Success - Array holding determined font data ; : Failure - Array holding default values ; Array elements - [0] = Size, [1] = Weight, [2] = Style, [3] = Name, [4] = Quality ; Author ........: KaFu ; Remarks .......: Used internally by ExtMsgBox UDF ; =============================================================================================================================== Func _GetDefaultEMBFont() ; Fill array with standard default data Local $aDefFontData[2] = [9, "Tahoma"] ; Get AutoIt GUI handle Local $hWnd = WinGetHandle(AutoItWinGetTitle()) ; Open Theme DLL Local $hThemeDLL = DllOpen("uxtheme.dll") ; Get default theme handle Local $hTheme = DllCall($hThemeDLL, 'ptr', 'OpenThemeData', 'hwnd', $hWnd, 'wstr', "Static") If @error Then Return $aDefFontData $hTheme = $hTheme[0] ; Create LOGFONT structure Local $tFont = DllStructCreate("long;long;long;long;long;byte;byte;byte;byte;byte;byte;byte;byte;wchar[32]") Local $pFont = DllStructGetPtr($tFont) ; Get MsgBox font from theme DllCall($hThemeDLL, 'long', 'GetThemeSysFont', 'HANDLE', $hTheme, 'int', 805, 'ptr', $pFont) ; TMT_MSGBOXFONT If @error Then Return $aDefFontData ; Get default DC Local $hDC = DllCall("user32.dll", "handle", "GetDC", "hwnd", $hWnd) If @error Then Return $aDefFontData $hDC = $hDC[0] ; Get font vertical size Local $iPixel_Y = DllCall("gdi32.dll", "int", "GetDeviceCaps", "handle", $hDC, "int", 90) ; LOGPIXELSY If Not @error Then $iPixel_Y = $iPixel_Y[0] ; Calculate point size $aDefFontData[0] = -Round(((1 * DllStructGetData($tFont, 1)) * 72 / $iPixel_Y), 1) EndIf ; Close DC DllCall("user32.dll", "int", "ReleaseDC", "hwnd", $hWnd, "handle", $hDC) ; Extract font data from LOGFONT structure $aDefFontData[1] = DllStructGetData($tFont, 14) Return $aDefFontData EndFunc ;=>_GetDefaultEMBFontEXAMPLE#include <ExtMsgBoxTimeoutCOLORED.au3> _ExtMsgBox(128, "OK", "Timeout", "COUNTDOWN", 20) Edited February 7, 2011 by iamtheky ,-. .--. ________ .-. .-. ,---. ,-. .-. .-. .-. |(| / /\ \ |\ /| |__ __||| | | || .-' | |/ / \ \_/ )/ (_) / /__\ \ |(\ / | )| | | `-' | | `-. | | / __ \ (_) | | | __ | (_)\/ | (_) | | .-. | | .-' | | \ |__| ) ( | | | | |)| | \ / | | | | | |)| | `--. | |) \ | | `-' |_| (_) | |\/| | `-' /( (_)/( __.' |((_)-' /(_| '-' '-' (__) (__) (_) (__) Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 7, 2011 Moderators Share Posted February 7, 2011 iamtheky, Pretty! M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
iamtheky Posted February 7, 2011 Author Share Posted February 7, 2011 thank you sir, didnt want to ruin your thread with my playing. ExtMsgbox is very well put together, so much so I even kind of understand it. ,-. .--. ________ .-. .-. ,---. ,-. .-. .-. .-. |(| / /\ \ |\ /| |__ __||| | | || .-' | |/ / \ \_/ )/ (_) / /__\ \ |(\ / | )| | | `-' | | `-. | | / __ \ (_) | | | __ | (_)\/ | (_) | | .-. | | .-' | | \ |__| ) ( | | | | |)| | \ / | | | | | |)| | `--. | |) \ | | `-' |_| (_) | |\/| | `-' /( (_)/( __.' |((_)-' /(_| '-' '-' (__) (__) (_) (__) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now