Jump to content
  1. slbmeh

    slbmeh

  • Similar Content

    • By Yodavish
      My AutoIt script works fine, for the most part, however, if it goes idle for roughly 30 minutes, it will won't be able to send data to a 3rd party application window titled, "Case #". 
      The problem lies within the function "SendFusion", it's able to see the handle for the "WinActivate" and "WinWaitActivate" (I've also tried putting in 10 seconds in the WinWaitActivate as well, doesn't work). However, if we have been idle, it will always fail to send data afterward. On what I've tried so far:
      "Send" function with the data and a {ENTER} i.e. Send($CaseTxt & "{ENTER}"), this won't even hit the enter key  ControlSetText, tried passing the handle from WinActivate, using the title "Case #" that was copied directly from the Autoit Window Info, hard coding the title, Using CLASS:WindowsForms10... always returns a 0 ControlCommand (same as above) always returns a 0 ControlGetFocus always returns a 0 ControlFocus, always returns a 0 Creating a new and simple Au3 script that just sends data to "Case #", also fails NOTE: If I close the Au3 script and just scan the data directly into the "Case #" or even type it, it works fine with no issues. I'm confused as to why it would not work after a long idle period?
      Below are the essential parts of the script, I can provide the entire thing if needed. Any suggestions would be greatly appreciated!
      #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include <Process.au3> #include <Misc.au3> #include <IE.au3> ;--------------------------------------------------------------- ; Only one instance can run ;--------------------------------------------------------------- If _Singleton("gross.exe", 1) = 0 Then MsgBox($MB_SYSTEMMODAL, "Warning", "Gross.exe is already running. Please exit the existing version first (check the icons in the lower right corner of your screen) before running it again.") Exit EndIf ;--------------------------------------------------------------- ; AutoIt Options ;--------------------------------------------------------------- Opt("GUIOnEventMode", 1) ; Change to OnEvent mode Opt("WinWaitDelay", 0) ; Alters how long a script should briefly pause after a successful window-related operation. Time in milliseconds to pause (default=250). Opt("WinTextMatchMode", 1) ; Alters the method that is used to match window text during search operations. 2 = Quick mode Opt("SendKeyDelay", 0) ; Alters the length of the brief pause in between sent keystrokes. A value of 0 removes the delay completely. Time in milliseconds to pause (default=5). if ($fusionWindowTitle="NONE" or $fusionCaseNumWinTitle="NONE" or $appWindowTitle="NONE" or $winActivateTimeout="NONE" or $winCloseTimeout="NONE" or $winWaitTimeout="NONE" or $pdfViewerWidth="NONE" or $pdfViewerHeight="NONE" or $pdfViewerLeft="NONE" or $pdfViewerWindowName="NONE" or $pdfViewerExeName="NONE" or $pdfUrl="NONE" or $pdfDownloadCommand="NONE") Then Msgbox(0,"ERROR", "gross.ini is missing or does not contain all settings. Please contact Help Desk with this information") Exit -1 EndIf ;--------------------------------------------------------------- ; application settings/constants ;--------------------------------------------------------------- Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") Global Const $[VARIABLE] = IniRead("gross.ini", "default", "[TitleOfVariable]", "NONE") ;--------------------------------------------------------------- ; create the main window ;--------------------------------------------------------------- Local $mainWindow = GUICreate($appWindowTitle, 380, 190) ; create the main GUI window GUISetOnEvent($GUI_EVENT_CLOSE, "handleCloseClick") ; when the click the windows close button call handleCloseClick() WinSetOnTop($appWindowTitle, '', 1) ; Sets main GUI always on top ;--------------------------------------------------------------- ; create the controls on the main window ;--------------------------------------------------------------- Local $okButton = GUICtrlCreateButton("OK", 160, 160, 54,24) ; create OK button GUICtrlSetOnEvent($okButton, "validateInput") ; when they click ok, call handleInputProcessRequest() GUICtrlCreateLabel("Scan Input", 10, 10) ; create a label Global $inputScan = GUICtrlCreateInput("", 10,134,358) ; create the input scan box GUICtrlSetOnEvent($inputScan, "validateInput") ; when they press enter in the scan input box, call handleInputProcessRequest() GUICtrlSetState($inputScan,$GUI_FOCUS) ; automatically sets focus on the input field GUISetState(@SW_SHOW) ; main GUI loop that runs at all times ;--------------------------------------------------------------- While 1 ;---------------------------------------------------------- ; If sumatraPDF active, resets focus back to GUI ;---------------------------------------------------------- If WinActive($pdfViewerWindowName) Then consoleWrite('While Loop sumatraPDF was active' & @CRLF) setMainWindow() ;---------------------------------------------------------- ; After data sent to ProTracker, check for mismatch ; save button to trigger the event handler when clicked ;---------------------------------------------------------- ElseIf WinActive($proTrackerWindowTitle) Then $ie = _IEAttach("ProTracker") $mismatchButton = _IEGetObjByName($ie, $proTrackerMisMatchButtonId) $oEvent = ObjEvent($mismatchButton, "mismatchButton_") If @error Then setMainWindow() ;--------------------------------------------------------------------- ; If Fusion is prompting for the case #, focus back to main GUI input ; If second GUI 'Unknown' detect do nothing ;--------------------------------------------------------------------- ElseIf WinExists($fusionWindowTitle) and WinExists($fusionCaseNumWinTitle) and Not WinActive($mainWindow) and Not WinExists('Unknown Input') Then setMainWindow() EndIF ;--------------------------------------------------------------------- ; Checks if $processFlag = Done, if so, shows PDF viewer and clears ; processFlag for next iteration ;--------------------------------------------------------------------- IF WinExists($pdfViewerWindowName) and $processFlag == 'Done' Then WinSetState ($pdfViewerWindowName, '', @SW_SHOW) $processFlag = '' setMainWindow() EndIF Sleep(100) ; Sleep to reduce CPU usage WEnd Func handleInputProcessRequest($input) $processFlag = True Local $hTimer = TimerInit() consoleWrite('> handleInputProcessRequest: ' & @CRLF) Local $idInput = identifyInput($input) ; Select a proccess to run based on id input Select Case $idInput = "container" ; regex that captures only the case number $caseTxt = StringUpper(StringRegExpReplace($strippedInputData, '\??(\w*\d*-\d*|\d*).*$','$1')) If WinExists($fusionWindowTitle) and WinExists($fusionCaseNumWinTitle) Then sendProTracker(StringUpper($strippedInputData)) sendFusion($caseTxt) ; gets pdf for sumatraPDF in seperate script, since that function is the slowest Run("viewPDF.exe " & $caseTxt) ;getSumatraPDF($caseTxt) $lastCaseNum = $caseTxt Else ; Checks to make sure the previous "Container" case num is the same ; to the current Container case num, before sending to ProTracker If($lastCaseNum <> $caseTxt) Then ; If not the same case number send alert sound SoundPlay("error.wav") Else sendProTracker($strippedInputData) EndIf EndIf Case $idInput = "user" sendProTracker($strippedInputData) Case $idInput = "cassette" sendProTracker(StringUpper($strippedInputData)) Case $idInput = "unknown" selectUnknown() EndSelect Local $fDiff = TimerDiff($hTimer) $processFlag = 'Done' consoleWrite('> handleInputProcessRequest Completed Total time: ' & $fDiff & ' ' &@CRLF&@CRLF&@CRLF) EndFunc Func sendFusion($caseTxt)     Local $hTimer = TimerInit()     consoleWrite('+ sendFusion initiated: ' & $caseTxt & @CRLF)     If $caseTxt = "" Then         MsgBox(0, "Error", "Not a valid case number")     Else         ;$fusionCaseNumWinTitle = "Case #"         $retVal1 = WinActivate($fusionCaseNumWinTitle, "")         consoleWrite("ReturnValue WinActivate " & $retVal1 & @CRLF)         $retVal2 = WinWaitActive($fusionCaseNumWinTitle,"",$winActivateTimeout)         consoleWrite("ReturnValue WinWaitActive: " & $retVal2 & @CRLF)         $retVal3 = ControlSetText($fusionCaseNumWinTitle, "", "", $caseTxt)         ;$retVal3 = ControlCommand($fusionCaseNumWinTitle, "", "", "EditPaste", $caseTxt)         consoleWrite("ReturnValue ControlSetText: " & $retVal3 & @CRLF)         ;Send($caseTxt & "{ENTER}")         WinWaitClose($fusionCaseNumWinTitle, "", $winCloseTimeout)         consoleWrite('+ sendFusion WinWaitClose: ' & @CRLF)     EndIf     Local $fDiff = TimerDiff($hTimer)     ConsoleWrite('+ sendFusion Completed Total time:' & $fDiff & ' ' & @CRLF) EndFunc
      Console logs from the SciTLE
      Window (x86) Info matches the correct handle for the WinActivate and WinWaitActivate

      Window Control (x86) Info, I've tried the CLASS, the ID, also I just noticed that the "handle" in "Control" and "Window" appear to be different as well.

       
      So far the only work-around is to close down the 3rd party application and the AutoIt script, re-open them and it works all completely fine. But this is a pain for the end-user since it's all touch screen and it slows down their workflow, which they can be extremely sensitive about.
       
    • By moimon
      Hi all. 
      Sorry if my words are confusing because I am not good at English.
      I am writing code to embed website with Recaptcha in GUI. And then, the code will automatically press the "I'm not a robot" button. The problem here is:
         - The code still works fine when entering iFrame to interact with Recaptcha with the URL is "https://www.google.com/recaptcha/api2/demo"
      <snip>
       
         - But for other URLs (such as "https://recaptcha-demo.appspot.com/recaptcha-v2-checkbox.php"), the code cannot be entered into the iframe.
       
      Code:
      <snip>  
      I did a lot of research but didn't know why.
       I sincerely thanks for the help. 
    • By SkysLastChance
      I am pretty sure the site that I am using was updated and now I am not seeing the same tags/elements that I used to. I tried using a UIAspy to see if I could grab them that way with no luck. 
      What do I need to do to be able to automate this again. Are the elements hidden somewhere?
      Instead of highlighting established account is highlights all of the web page almost. How can I get to the detail again? 
      I used to grab establish account by the name. Now I have nothing to even try to grab. 
      There are not elements in the event viewer either. 
       


       
      This is what happens when I try to inspect the element and click established account. 
      I get the same type of results in chrome
    • By yffulf
      Is there probably a way to click ie popup button and hide or invisible popup button in the same time?
      I try to use WinSetState @SW_hide ,
      the result is ie crashing or no response because button hide and the next click command won't work...
      $oForm=_IEFormGetObjByName($oIE,"form1") $obutton=_IEFormElementGetObjByName($oForm,"btn_OK") $hWnd = _IEPropertyGet($oIE, "hwnd") _IEAction($obutton,"focus") ControlSend($hWnd, "", "[CLASS:Internet Explorer_Server; INSTANCE:1]", "{Enter}") WinWait("", "確定存檔嗎?") WinSetState("","確定存檔嗎?",@SW_Hide) ControlClick("", "確定存檔嗎?", "[CLASS:Button; TEXT:確定; Instance:1;]")  
    • By _leo_
      Hey there!
      I am having a problem with clicking a button in IE. As you can see in the code, there would be a class name to click it, but since this button exists several times with exactly the same code, I can only use the "Noch nicht veröffentlicht" to separate it from the others. But this part is just pure text without any classification. 
      "<div class="checkmark" data-v-1e5b1f70=""><svg xmlns="http://www.w3.org/2000/svg" class="icon" viewBox="0 0 16 16" data-v-1e5b1f70=""><circle cx="8" cy="8" r="8" data-v-1e5b1f70="" /></svg></div>Noch nicht veröffentlicht"
      I was trying to click it with:
      #include <IE.au3> local $oNNVs = _IEFormGetCollection($oIE2) For $oNNV in $oNNVs If String($oNNV.innertext) = "Noch nicht veröffentlicht" Then _IEAction($oNNV, "click") EndIf Next and:
      $inputs = $oIE2.document.getElementsByTagName("div") For $input In $inputs If $input.innertext == "Noch nicht veröffentlicht" then $input.click() EndIf Next But nothing seems to work. Thanks for the help!
×
×
  • Create New...