Jump to content
Sign in to follow this  

Detect devices that don't have a drive letter

Recommended Posts


I have searched the forum and really can't find what I'm looking for. I would like to find a script that can scan a computer and find devices plugged into a USB port that DOESN'T have a drive letter.

I can detect devices that have a drive letter without a problem, but what I'm looking for are devices that don't produce a drive letter but show up as say an "Audio Device". Some personal audio devices show up as a device of this type and they are not assigned a drive letter. This is what I want to find.

A flatbed scanner would show up as an imaging device.

Any help would be appreciated.

Share this post

Link to post
Share on other sites


I would guess this utility digs it out of the registry. If I remember it used to be devices came in 2 categories. Block and character(but it's been a long time since I read about device drivers.) I tried searching USB character devices but it didn't really provide anything helpful. I would try a registry search utility like RegScanner by the same author.

Edited by MilesAhead

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • JRSmile
      By JRSmile
      i searched the forum to communicate with a logitech G600 without using Shortcuts or Default Mouse Keys.
      the code below lets u use your sidekeys whenever you press down the ring key.
      before using the code you will have to unassign the keys in the logitech mouse driver software.
      The source of my code is a wacom usb script, wich was heavily modified to work.
      you might find some parts wierd, thats because this is my first attempt to communicate via raw hid. 
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Change2CUI=y #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** #include <APISysConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WinAPIGdi.au3> #include <WinAPIMisc.au3> #include <WinAPISys.au3> #include <WindowsConstants.au3> #cs ; #include "CommMG.au3" $mgdebug = True Global $sportSetError $tset = _ComGetPortNames() for $i = 0 to UBound($tset) -1 if $tset[$i][1] = "Serielles USB-Gerät" Then $COMPort = StringTrimLeft($tset[$i][0],3) ConsoleWrite("Teensy an Port COM" & $COMPort & " gefunden!" & @CRLF) EndIf Next $resOpen = _CommSetPort($COMPort,$sportSetError,31250, 8,0,1,0,0,0) if $resOpen = 0 then ConsoleWrite($sportSetError & @LF) ;~ Exit EndIf #ce $atagRID_DEVICE_INFO_HID = 'struct;dword VendorId;dword ProductId;dword VersionNumber;ushort UsagePage;ushort Usage;endstruct' $atagRID_INFO_HID = 'dword Size;dword Type;' & $atagRID_DEVICE_INFO_HID & ';dword Unused[2]' Opt('TrayAutoPause', 0) ; Create GUI Global $g_hForm = GUICreate('G600', 100, 25, -1, -1, BitOR($WS_CAPTION, $WS_POPUP, $WS_SYSMENU)) Local $tRID = DllStructCreate($tagRAWINPUTDEVICE) DllStructSetData($tRID, 'Flags', $RIDEV_INPUTSINK) DllStructSetData($tRID, 'hTarget', $g_hForm) DllStructSetData($tRID, 'UsagePage', 0x80) ; Logitech G600 DllStructSetData($tRID, 'Usage', 0x0A) ; _WinAPI_RegisterRawInputDevices($tRID) ; Now iterate to find other devices Local $tText, $aData = _WinAPI_EnumRawInputDevices() If IsArray($aData) Then ReDim $aData[$aData[0][0] + 1][3] $tText = DllStructCreate('wchar[256]') For $i = 1 To $aData[0][0] If _WinAPI_GetRawInputDeviceInfo($aData[$i][0], $tText, 256, $RIDI_DEVICENAME) Then $aData[$i][2] = DllStructGetData($tText, 1) Else $aData[$i][2] = '' EndIf If $aData[$i][1] = $RIM_TYPEHID Then $devInf = DllStructCreate($atagRID_INFO_HID) If _WinAPI_GetRawInputDeviceInfo($aData[$i][0], $devInf, DllStructGetSize($devInf), $RIDI_DEVICEINFO ) Then If DllStructGetData($devInf, 'VendorId') = 0x046D And DllStructGetData($devInf, 'ProductId') = 0xC24A then ; G600 VID & PID ConsoleWrite ("Device Info:-" & @CRLF) ConsoleWrite ('VendorId: ' & Hex(DllStructGetData($devInf, 'VendorId'),4) & @CRLF) ConsoleWrite ('ProductId: ' & Hex(DllStructGetData($devInf, 'ProductId'),4) & @CRLF) ConsoleWrite ('VersionNumber: ' & DllStructGetData($devInf, 'VersionNumber') & @CRLF) ConsoleWrite ('UsagePage: ' & Hex(DllStructGetData($devInf, 'UsagePage'),2) & @CRLF) ConsoleWrite ('Usage: ' & Hex(DllStructGetData($devInf, 'Usage'),2) & @CRLF) DllStructSetData($tRID, 'UsagePage', DllStructGetData($devInf, 'UsagePage')) DllStructSetData($tRID, 'Usage', DllStructGetData($devInf, 'Usage')) _WinAPI_RegisterRawInputDevices($tRID) EndIf EndIf EndIf Next EndIf ; Register WM_INPUT message GUIRegisterMsg($WM_INPUT, 'WM_INPUT') GUISetState(@SW_SHOW) Global $structHID_DATA = "struct;" & _ "dword Type;" & _ "dword Size;" & _ "handle hDevice;" & _ "wparam wParam;" & _ "dword dwSizeHid;" & _ "dword dwCount;" & _ "endstruct;" Global $structWACOM_PEN_DATA = "struct;" & _ "dword Type;" & _ "dword Size;" & _ "handle hDevice;" & _ "wparam wParam;" & _ "dword dwSizeHid;" & _ "dword dwCount;" & _ "ubyte bRawData00;" & _ "ubyte penvsEraser;" & _ "word x;" & _ "word y;" & _ "word proximity;" & _ "word pressure;" & _ "ubyte bRawData09;" & _ "ubyte bRawData10;" & _ "ubyte bRawData11;" & _ "ubyte bRawData12;" & _ "ubyte bRawData13;" & _ "ubyte bRawData14;" & _ "ubyte bRawData15;" & _ "ubyte bRawData16;" & _ "ubyte bRawData17;" & _ "ubyte bRawData18;" & _ "ubyte bRawData19;" & _ "ubyte bRawData20;" & _ "ubyte bRawData21;" & _ "ubyte bRawData22;" & _ "ubyte bRawData23;" & _ "ubyte bRawData24;" & _ "ubyte bRawData25;" & _ "ubyte bRawData26;" & _ "ubyte bRawData27;" & _ "ubyte bRawData28;" & _ "ubyte bRawData29;" & _ "ubyte bRawData30;" & _ "ubyte bRawData31;" & _ "ubyte bRawData32;" & _ "ubyte bRawData33;" & _ "ubyte tilt_ba;" & _ "ubyte bRawData35;" & _ "ubyte tilt_na;" & _ "ubyte bRawData37;" & _ "endstruct;" Do Until GUIGetMsg() = $GUI_EVENT_CLOSE Func WM_INPUT($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam Switch $hWnd Case $g_hForm Local $tRIM = DllStructCreate($tagRAWINPUTHEADER) If _WinAPI_GetRawInputData($lParam, $tRIM, DllStructGetSize($tRIM), $RID_HEADER) Then ; Retrieves the raw input from the specified device $devType = DllStructGetData($tRIM, 'Type') $devSize = DllStructGetData($tRIM, 'Size') Else ConsoleWrite ("Device Header Retrieval Failed" & @CRLF) Return EndIf ; Now use the handle to the device to get it's name Local $tText = DllStructCreate('wchar[256]') If _WinAPI_GetRawInputDeviceInfo(DllStructGetData($tRIM, 'hDevice'), $tText, 256, $RIDI_DEVICENAME) Then $devName = DllStructGetData($tText, 1) Else ConsoleWrite ("Device Name Retrieval Failed" & @CRLF) EndIf if $devType = $RIM_TYPEHID Then $tRIM = DllStructCreate($structWACOM_PEN_DATA) If _WinAPI_GetRawInputData($lParam, $tRIM, DllStructGetSize($tRIM), $RID_INPUT) Then if DllStructGetData($tRIM, 8) = 32 Then ; filter for ring key down (G-Mode) Switch DllStructGetData($tRIM, 9) ; if in g mode assign the Keys G9 to G20 to autoit functions. case 0 Return ; key released case 1 g1() case 2 g2() case 4 g3() case 8 g4() case 16 g5() case 32 g6() case 64 g7() case 128 g8() case 256 g9() case 512 g10() case 1024 g11() case 2048 g12() Case Else ;;; ConsoleWrite(DllStructGetData($tRIM, 9) & @CRLF) EndSwitch EndIf EndIf EndIf EndSwitch sleep(50) Return $GUI_RUNDEFMSG EndFunc ;==>WM_INPUT Func g1() ;~ Send("2") ConsoleWrite("g1" & @CRLF) ;~ _CommSendString("KEY_TAB" & @LF) ;~ Sleep(random(50,100,1)) ;~ _CommSendString("KEY_RELEASE_ALL" & @LF) ;~ Sleep(random(50,100,1)) ;~ _CommSendString("KEY_2" & @LF) ;~ Sleep(random(50,100,1)) ;~ _CommSendString("KEY_RELEASE_ALL" & @LF) EndFunc Func g2() ConsoleWrite("g2" & @CRLF) EndFunc Func g3() ConsoleWrite("g3" & @CRLF) EndFunc Func g4() ConsoleWrite("g4" & @CRLF) EndFunc Func g5() ConsoleWrite("g5" & @CRLF) EndFunc Func g6() ConsoleWrite("g6" & @CRLF) EndFunc Func g7() ConsoleWrite("g7" & @CRLF) EndFunc Func g8() ConsoleWrite("g8" & @CRLF) EndFunc Func g9() ConsoleWrite("g9" & @CRLF) EndFunc Func g10() ConsoleWrite("g10" & @CRLF) EndFunc Func g11() ConsoleWrite("g11" & @CRLF) EndFunc Func g12() ConsoleWrite("g12" & @CRLF) EndFunc  
    • BigMac121263
      By BigMac121263
      I know that this theme was discussed several times but I read all These threats with no helping result.
      I have two pieces of TEMPer1F USB Thermometer.
      It is a Standard Windows HID device with no add. Driver needed.
      With the device I got an App reading from it and showing Graphs and much more and which can handle several devices.
      With the Software came also a RDingUSB.dll file handling the communication with the device.
      I can call the dll without any error. But the Problem is how to Access the device using the DLL and Access more than one of same VID/PID
      by Serial or anything else useful.
      I have also sources in c# doing the Job, but no experience in C# to successfuly port it to AutoIT.
      So my question: Can anyone help me to realize the simple pull of the temperature value from the devices based on C# source?
      The rest to write it to MySQL DB and repeat it etc. is no Problem for me.
      The C# part with the DLL functions class:
      using System;
      using System.Runtime.InteropServices;
      namespace TEMPer
        internal class RDing
          public static extern IntPtr OpenUSBDevice(int VID, int PID);
          public static extern IntPtr CloseUSBDevice(IntPtr hDevice);
          public static extern bool WriteUSB(IntPtr hDevice, byte[] pBuffer, uint dwBytesToWrite, ref ulong lpNumberOfBytesWritten);
          public static extern bool ReadUSB(IntPtr hDevice, byte[] pBuffer, uint dwBytesToRead, ref ulong lpNumberOfBytesRead);
          public static extern ushort GetInputLength(IntPtr hDevice);
          public static extern ushort GetOutputLength(IntPtr hDevice);
          public static extern uint GetErrorMsg(ref string[] lpErrorMsg, uint dwErrorMsgSize);
      The C# code snippet working with the functions of the class above is in the attachment
      this is the interesting part where the data is sent and pulled which I
      do not understand to transcode to AutoIT
      Important my devices are the type2 (TEMPer1F) :
      So in the end I Need: Call DLL, read all devices in array
      Loop the Array until ubound(Array) and for each device in Array read the temperature value and prepare the data to
      decimal 6,1 (SQL Format) and °C
      So how to pull the value from the devices?
      Maybe somwbody finds the important part in the C#  (the code above is for different models, mine is TEMPer1F
      Or maybe someone has solved this and has maybe a uDF for this
    • SAM1386
      By SAM1386
      I can easily find my modem comport number using the code below:-
      #include <FileConstants.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3>    Global $key = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM","\Device\ssudmdm0000")     Local $iError = 0     If @error Then        ; The server is probably offline/port is not opened on the server.        $iError = @error         MsgBox(BitOR($MB_SYSTEMMODAL, $MB_ICONHAND), "", "Client:" & @CRLF & "Could not connect, Error code: " & $iError)         Else         MsgBox($MB_ SYSTEMMODAL, "MODEM:", $key)         EndIf  
      but the thing is I am planning to design a small tool by which it can read the modem COM port and set the COM number and send AT command to modem port using UDF CommMG.au3 created by Martin. I added some below code to martins file :-
      ;====================================================================================================================== ;CommSendStandard,a new function for sending information to a serial port. ;====================================================================================================================== Func _CommSendStandard($port,$error,$command)    _CommSetPort($port,$error,9600,8,0,1,2)  if $error <> '' Then      MsgBox(262144,'Port Error = ',$error)  EndIf  _CommSendString($command & @CR) EndFunc   ;==>_CommGetLineStates ;=============================================================================================== After adding I wrote the below code for sending AT command to modem port but its not working.
      Please check the below code and let me know for the issue.
      ;===================================================================================== #include "C:\Program Files (x86)\AutoIt3\SciTE\CommMG.au3" #include <FileConstants.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3>    Global $key = RegRead("HKLM\HARDWARE\DEVICEMAP\SERIALCOMM","\Device\ssudmdm0000")     Local $iError = 0     If @error Then        ; The server is probably offline/port is not opened on the server.        $iError = @error         MsgBox(BitOR($MB_SYSTEMMODAL, $MB_ICONHAND), "", "Client:" & @CRLF & "Could not connect, Error code: " & $iError)         Else         MsgBox($MB_SYSTEMMODAL, "MODEM:", $key)         EndIf Local $port=$key Local $porterror _CommSendStandard($port,$portError,"AT+CFUN=1,1") ;================================================================================================ but If I set the port number by my own in the code (for eg :- port number 8 or any value  instead of $key) it works fine and the modem gets reset.I want to know if there is any way to get the port number to a variable $port and discarding so that my above code works fine...In that case user donot have to take care of entering the port manually everytime and the script will automatically read the port number and set itself.
      Please help
    • mikkokh
      By mikkokh
      I have several different devices connected to my desktop PC with USB COM adapters.
      Sometimes there is some error that will cut my USB COM device communication (usualy caused by lose USB connector)... After reconnecting that USB COM adapter, by some reason, Windows will give it different COM port number.
      I know there are some devices with integrated COM port circuit and they are used by client programs that can found them and only them by some USB hardware relate details and then use their COM port to communicate with correct COM device.
      It would be better to define some known and static hardware related string from device managers USB COM adapter details to my script config file, than always redefine different COM port to it.
      How can I do this trick with autoit?
      I communicate COM devices with cfxUDF.au3 AutoIt UDF.
    • queensoft
      By queensoft
      Connect Android phone > enable USB file transfer > go to My Computer, there's an icon, but no drive letter - this is normal.
      Open phone icon > go to Internal Storage > go to DCIM > copy all files and folders to computer.
      Now, I want a quick AutoIt script / windows batch to do this automatically.
      Get USB path with this - it works OK:
      #include <WinAPICom.au3> Global Const $sCLSID_PortableDeviceManager = "{0af10cec-2ecd-4b92-9581-34f6ae0637f3}" Global Const $sIID_IPortableDeviceManager = "{a1567595-4c2f-4574-a6fa-ecef917b9a40}" Global Const $sTagIPortableDeviceManager = "GetDevices hresult(ptr;dword*); RefreshDeviceList hresult(); " & _ "GetDeviceFriendlyName hresult(wstr;wstr;dword*); GetDeviceDescription hresult(wstr;wstr;dword*); " & _ "GetDeviceManufacturer hresult(wstr;wstr;dword*); GetDeviceManufacturer hresult(wstr;wstr;ptr;dword*dword*); " & _ "GetPrivateDevices hresult(ptr;dword*)" Global Enum $eDevID, $eDevName, $eDevManufacturer, $eDevDescription Local $aPnPDevices = GetPortableDevices() If IsArray($aPnPDevices) Then _ArrayDisplay($aPnPDevices) ;~ Success: Return 0 ;~ Failure: Return 2DArray [n][4] |;[n][0]$eDevID, [n][1]$eDevName, [n][2]$eDevManufacturer,[n][3] $eDevDescription Func GetPortableDevices() Local $aDevicesInfo[0][0] ;[n][0]$eDevID, [n][1]$eDevName, [n][2]$eDevManufacturer,[n][3] $eDevDescription Local $oPortableDeviceManager = 0 Local $SizeofArray = 0 Local $hr = 0x80004005 ;E_Fail Just to Initialized <0 Local $taPnPDeviceIDs = 0 Local $tName = 0 $oPortableDeviceManager = ObjCreateInterface($sCLSID_PortableDeviceManager, $sIID_IPortableDeviceManager, $sTagIPortableDeviceManager) If Not IsObj($oPortableDeviceManager) Then Return 0 If FAILED($oPortableDeviceManager.GetDevices(Null, $SizeofArray)) Then Return 0 If $SizeofArray < 1 Then Return 0 $taPnPDeviceIDs = DllStructCreate("ptr[" & $SizeofArray & "]") If FAILED($oPortableDeviceManager.GetDevices(DllStructGetPtr($taPnPDeviceIDs), $SizeofArray)) Then Return 0 ReDim $aDevicesInfo[$SizeofArray][4] For $i = 0 To $SizeofArray - 1 $tName = DllStructCreate("wchar[512]", DllStructGetData($taPnPDeviceIDs, 1, $i + 1)) $aDevicesInfo[$i][$eDevID] = DllStructGetData($tName, 1) $aDevicesInfo[$i][$eDevName] = _GetFriendlyName($oPortableDeviceManager, $aDevicesInfo[$i][$eDevID]) $aDevicesInfo[$i][$eDevManufacturer] = _GetDeviceManufacturer($oPortableDeviceManager, $aDevicesInfo[$i][$eDevID]) $aDevicesInfo[$i][$eDevDescription] = _GetDeviceDescription($oPortableDeviceManager, $aDevicesInfo[$i][$eDevID]) $tName = 0 _WinAPI_CoTaskMemFree(DllStructGetData($taPnPDeviceIDs, 1, $i + 1)) Next Return $aDevicesInfo EndFunc ;==>GetPortableDevices Func _GetDeviceManufacturer($oInterface, $PnPDeviceID) Local $sString = "" $oInterface.GetDeviceManufacturer($PnPDeviceID, $sString, 128) Return $sString EndFunc ;==>_GetDeviceManufacturer Func _GetDeviceDescription($oInterface, $PnPDeviceID) Local $sString = "" Local Const $Size = 128 $oInterface.GetDeviceDescription($PnPDeviceID, $sString, 128) Return $sString EndFunc ;==>_GetDeviceDescription Func _GetFriendlyName($oInterface, $PnPDeviceID) Local $sString = "" Local Const $Size = 128 $oInterface.GetDeviceFriendlyName($PnPDeviceID, $sString, 128) Return $sString EndFunc ;==>_GetFriendlyName Func _GetProperty($oInterface, $PnPDeviceID) Local $sString = "" Local Const $Size = 128 $oInterface.GetDeviceFriendlyName($PnPDeviceID, $sString, 128) Return $sString EndFunc ;==>_GetProperty Func FAILED($hr) Return ($hr < 0) EndFunc ;==>FAILED Path looks like this:
      \\?\usb#vid_0e8d&pid_201d&mi_00#7&37c4bb9&0&0000#{6ac27878-a6fa-4155-ba85-f98f491d4f33} I can open this in a Windows Explorer windows and it works ok.
      Now, search for files using AutoIt - does not work:
      #include <GUIConstantsEx.au3> #include <Array.au3> #include <File.au3> Local $f $f = _RecFileListToArray("\\?\usb#vid_0e8d&pid_201d&mi_00#7&37c4bb9&0&0000#{6ac27878-a6fa-4155-ba85-f98f491d4f33}", "*.*", 0, 1, 1) _ArrayDisplay($f) ; Name...........: _RecFileListToArray ; Description ...: Lists files and\or folders in a specified path (Similar to using Dir with the /B Switch) ; Syntax.........: _RecFileListToArray($sPath[, $sFilter = "*"[, $iFlag = 0[, $iRecur = 0[, $iFullPath = 0]]]]) ; Parameters ....: $sPath - Path to generate filelist for. ; $sFilter - Optional the filter to use, default is *. Search the Autoit3 helpfile for the word "WildCards" For details. ; $iFlag - Optional: specifies whether to return files folders or both ; |$iFlag=0 (Default) Return both files and folders ; |$iFlag=1 Return files only ; |$iFlag=2 Return Folders only ; $iRecur - Optional: specifies whether to search in subfolders ; |$iRecur=0 (Default) Do not search in subfolders ; |$iRecur=1 Search in subfolders ; $iFullPath - Optional: specifies whether to include initial path in result string ; |$iFullPath=0 (Default) Do not include initial path ; |$iFullPath=1 Include initial path ; Return values .: @Error - 1 = Path not found or invalid ; |2 = Invalid $sFilter ; |3 = Invalid $iFlag ; |4 = Invalid $iRecur ; |5 = Invalid $iFullPath ; |6 = No File/Folder Found ; Author ........: SolidSnake <MetalGX91 at GMail dot com> ; Modified.......: 22 Jan 09 by Melba23 - added recursive search and full path options ; Remarks .......: The array returned is one-dimensional and is made up as follows: ; $array[0] = Number of Files\Folders returned ; $array[1] = 1st File\Folder ; $array[2] = 2nd File\Folder ; $array[3] = 3rd File\Folder ; $array[n] = nth File\Folder ; Related .......: ; Link ..........; ; Example .......; Yes ; ==================================================================================================== ;Special Thanks to Helge and Layer for help with the $iFlag update ; speed optimization by code65536 ;=============================================================================== Func _RecFileListToArray($sPath, $sFilter = "*", $iFlag = 0, $iRecur = 0, $iFullPath = 0) Local $asFileList[1], $sFullPath If Not FileExists($sPath) Then Return SetError(1, 1, "") If StringRight($sPath, 1) <> "\" Then $sPath = $sPath & "\" If (StringInStr($sFilter, "\")) Or (StringInStr($sFilter, "/")) Or (StringInStr($sFilter, ":")) Or (StringInStr($sFilter, ">")) Or (StringInStr($sFilter, "<")) Or (StringInStr($sFilter, "|")) Or (StringStripWS($sFilter, 8) = "") Then Return SetError(2, 2, "") If Not ($iFlag = 0 Or $iFlag = 1 Or $iFlag = 2) Then Return SetError(3, 3, "") If Not ($iRecur = 0 Or $iRecur = 1) Then Return SetError(4, 4, "") If $iFullPath = 0 Then $sFullPath = $sPath ElseIf $iFullPath = 1 Then $sFullPath = "" Else Return SetError(5, 5, "") EndIf _FLTA_Search($sPath, $sFilter, $iFlag, $iRecur, $sFullPath, $asFileList) If $asFileList[0] = 0 Then Return SetError(6, 6, "") Return $asFileList EndFunc ;==>_FileListToArray ; #INTERNAL_USE_ONLY#================================================================================= ; Name...........: _FLTA_Search ; Description ...: Searches folder for files and then recursively searches in subfolders ; Syntax.........: _FLTA_Search($sStartFolder, $sFilter, $iFlag, $iRecur, $sFullPath, ByRef $asFileList) ; Parameters ....: $sStartFolder - Value passed on from UBound($avArray) ; $sFilter - As set in _FileListToArray ; $iFlag - As set in _FileListToArray ; $iRecur - As set in _FileListToArray ; $sFullPath - $sPath as set in _FileListToArray ; $asFileList - Array containing found files/folders ; Return values .: None ; Author ........: Melba23 based on code from _FileListToArray by SolidSnake <MetalGX91 at GMail dot com> ; Modified.......: ; Remarks .......: This function is used internally by _FileListToArray. ; Related .......: ; Link ..........; ; Example .......; ; ==================================================================================================== Func _FLTA_Search($sStartFolder, $sFilter, $iFlag, $iRecur, $sFullPath, ByRef $asFileList) Local $hSearch, $sFile If StringRight($sStartFolder, 1) <> "\" Then $sStartFolder = $sStartFolder & "\" ; First look for filtered files/folders in folder $hSearch = FileFindFirstFile($sStartFolder & $sFilter) If $hSearch > 0 Then While 1 $sFile = FileFindNextFile($hSearch) If @error Then ExitLoop Switch $iFlag Case 0; Both files and folders If $iRecur And StringInStr(FileGetAttrib($sStartFolder & $sFile), "D") <> 0 Then ContinueLoop Case 1; Files Only If StringInStr(FileGetAttrib($sStartFolder & $sFile), "D") <> 0 Then ContinueLoop Case 2; Folders only If StringInStr(FileGetAttrib($sStartFolder & $sFile), "D") = 0 Then ContinueLoop EndSwitch If $iFlag = 1 And StringInStr(FileGetAttrib($sStartFolder & $sFile), "D") <> 0 Then ContinueLoop If $iFlag = 2 And StringInStr(FileGetAttrib($sStartFolder & $sFile), "D") = 0 Then ContinueLoop _FLTA_Add($asFileList, $sFullPath, $sStartFolder, $sFile) WEnd FileClose($hSearch) ReDim $asFileList[$asFileList[0] + 1] EndIf If $iRecur = 1 Then ; Now look for subfolders $hSearch = FileFindFirstFile($sStartFolder & "*.*") If $hSearch > 0 Then While 1 $sFile = FileFindNextFile($hSearch) If @error Then ExitLoop If StringInStr(FileGetAttrib($sStartFolder & $sFile), "D") And ($sFile <> "." Or $sFile <> "..") Then ; If folders needed, add subfolder to array If $iFlag <> 1 Then _FLTA_Add($asFileList, $sFullPath, $sStartFolder, $sFile) ; Recursive search of this subfolder _FLTA_Search($sStartFolder & $sFile, $sFilter, $iFlag, $iRecur, $sFullPath, $asFileList) EndIf WEnd FileClose($hSearch) EndIf EndIf EndFunc ; #INTERNAL_USE_ONLY#================================================================================= ; Name...........: _FLTA_Add ; Description ...: Searches folder for files and then recursively searches in subfolders ; Syntax.........: _FLTA_Add(ByRef $asFileList, $sFullPath, $sStartFolder, $sFile) ; Parameters ....: $asFileList - Array containing found files/folders ; $sFullPath - $sPath as set in _FileListToArray ; $sStartFolder - Value passed on from UBound($avArray) ; $sFile - Full path of file/folder to add to $asFileList ; Return values .: Function only changes $asFileList ByRef ; Author ........: Melba23 based on code from _FileListToArray by SolidSnake <MetalGX91 at GMail dot com> ; Modified.......: ; Remarks .......: This function is used internally by _FileListToArray. ; Related .......: ; Link ..........; ; Example .......; ; ==================================================================================================== Func _FLTA_Add(ByRef $asFileList, $sFullPath, $sStartFolder, $sFile) Local $sAddFolder $asFileList[0] += 1 If UBound($asFileList) <= $asFileList[0] Then ReDim $asFileList[UBound($asFileList) * 2] If $sFullPath = "" Then $sAddFolder = $sStartFolder Else $sAddFolder = StringReplace($sStartFolder, $sFullPath, "") EndIf $asFileList[$asFileList[0]] = $sAddFolder & $sFile EndFunc File copy using Autoit - does not work:
      FileCopy("\\?\usb#vid_0e8d&pid_201d&mi_00#7&37c4bb9&0&0000#{6ac27878-a6fa-4155-ba85-f98f491d4f33}\Internal storage\DCIM\Camera MX\PHOTO_20161007_123935.jpg", 'd:\Diverse 2\654\0\') Copy using Windows batch - does not work:
      xcopy /Y /E "\\?\usb#vid_0e8d&pid_201d&mi_00#7&37c4bb9&0&0000#{6ac27878-a6fa-4155-ba85-f98f491d4f33}\Internal storage\DCIM\*.*" "d:\Diverse 2\654\0\"  

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.