Jump to content
  1. FireFox

    FireFox

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mLipok
      This UDF was created for give any kind of support for GDPR solutions in AutoIt.
       
      #include "GDPR.au3" #AutoIt3Wrapper_Run_AU3Check=Y #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #Tidy_Parameters=/sort_funcs /reel ; #AutoIt3Wrapper_Run_Debug_Mode=Y _Example() Func _Example() _GDPR_Crypter_Wrapper(_Example_Crypter) Local $sText = 'AutoIt v3 is a freeware BASIC-like scripting language designed for automating the Windows GUI and general scripting.' MsgBox(0, @ScriptLineNumber, _GDPR_Anonymize_String($sText)) Local $dCrypted = _GDPR_Crypt_String($sText) MsgBox(0, @ScriptLineNumber, $dCrypted & @CRLF & @error & @CRLF & @extended) Local $sDecrypted = _GDPR_DeCrypt_AsString($dCrypted) MsgBox(0, @ScriptLineNumber, $sDecrypted & @CRLF & @error & @CRLF & @extended) _GDPR_Crypt_File(@ScriptFullPath, @ScriptFullPath & '.CRYPTED') If @error Then ConsoleWrite('! ---> @error=' & @error & ' @extended=' & @extended & ' : _GDPR_Crypt_File' & @CRLF) _GDPR_DeCrypt_File(@ScriptFullPath & '.CRYPTED', @ScriptFullPath & '.DECRYPTED.au3') If @error Then ConsoleWrite('! ---> @error=' & @error & ' @extended=' & @extended & ' : _GDPR_DeCrypt_File' & @CRLF) EndFunc ;==>_Example Func _Example_Crypter($dBinaryData, $bDataAlreadyEncrypted) _Crypt_Startup() ; Start the Crypt library. Local $dResult If $bDataAlreadyEncrypted Then $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_3DES) ; Decrypt the data using the generic password string. The return value is a binary string. Else $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_3DES) ; Encrypt the text with the new cryptographic key. EndIf _Crypt_Shutdown() ; Shutdown the Crypt library. Return $dResult EndFunc ;==>_Example_Crypter  
      Download link:
       
      WIKI:
      This UDF was added here:  https://www.autoitscript.com/wiki/User_Defined_Functions
       
       
    • By mLipok
      This UDF was created to facilitate the saving and reading of email configuration.
      Thanks to @water, @jchd, @Jos for helping in translation of _EmailConfig_GUI_Preset_**()
      Hope to have _EmailConfig_GUI_Preset_ES() version soon.

      If you want to create your national version of _EmailConfig_GUI_Preset_**() please do not hesitate ... contribute.
      _EmailConfig_GUI_Preset_EN() is translated by me and Google Translator (from my national Polish language), so if you have any fix for this please do not hesitate ... contribute.
       
      The EmailConfig_Example_STMP_Mailer.au3   is using modified version of Jos SMTP Mailer UDF
       
      #AutoIt3Wrapper_UseX64=N #AutoIt3Wrapper_Run_AU3Check=Y #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #Tidy_Parameters=/sort_funcs /reel #include <Array.au3> #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <Crypt.au3> #include <EditConstants.au3> #include <File.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include "EmailConfig.au3" #include "GDPR.au3" ; https://www.autoitscript.com/forum/files/file/509-gdpr/ Global $oMyRet[2] #Region - EXAMPLE _MY_EXAMPLE__EmailConfig() Func _MY_EXAMPLE__EmailConfig() _GDPR_Crypter_Wrapper(_EmailConfig_ExampleCrypter) _EmailConfig_GUI_Preset_EN() ;~ _EmailConfig_GUI_Preset_DE() ;~ _EmailConfig_GUI_Preset_FR() ;~ _EmailConfig_GUI_Preset_NL() ;~ _EmailConfig_GUI_Preset_PL() _EmailConfig_SaveWrapper(_EmailConfig_SaveToINI) _EmailConfig_LoadWrapper(_EmailConfig_LoadFromINI) _EmailConfig_LoadWrapper() If $IDYES = MsgBox($MB_YESNO + $MB_TOPMOST + $MB_ICONQUESTION + $MB_DEFBUTTON1, 'Question #' & @ScriptLineNumber, _ 'Do you want to set email configuration ?') Then _EmailConfig_ShowGUI() EndIf Local $s_ToAddress = 'whereisyourdestination@your.email.com' Local $s_Subject = 'Testing email sending : ' & @YEAR & @MON & @MDAY & ' ' & @HOUR & @MIN & @SEC Local $s_Body = 'This is only a test' Local $s_Attachments = '' _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) EndFunc ;==>_MY_EXAMPLE__EmailConfig Func _EmailConfig_ExampleCrypter($dBinaryData, $bDataAlreadyEncrypted) _Crypt_Startup() ; Start the Crypt library. Local $dResult If $bDataAlreadyEncrypted Then $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Decrypt the data using the generic password string. The return value is a binary string. Else $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Encrypt the text with the new cryptographic key. EndIf _Crypt_Shutdown() ; Shutdown the Crypt library. Return $dResult EndFunc ;==>_EmailConfig_ExampleCrypter #EndRegion - EXAMPLE ; ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $oCOM_Error_Handler = ObjEvent("AutoIt.Error", "MyErrFunc") #forceref $oCOM_Error_Handler Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 #forceref $i_Error Local $i_Error_desciption = "" #forceref $i_Error_desciption If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console If FileExists($S_Files2Attach[$x]) Then ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF) $objEmail.AddAttachment($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 Then $IPPort = 25 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ; Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ; Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail = "" EndFunc ;==>_INetSmtpMailCom Func _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) #Tidy_ILC_Pos=120 Local $aEMAIL_CONFIG = __EmailConfig__API() Local $SmtpServer = $aEMAIL_CONFIG[$EMAIL_CONFIG__22__SMTP_SERVER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address for the smtp-server to use - REQUIRED Local $FromName = $aEMAIL_CONFIG[$EMAIL_CONFIG__02__COMMON_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; name from who the email was sent Local $FromAddress = $aEMAIL_CONFIG[$EMAIL_CONFIG__03__EMAIL_ADDRESS][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address from where the mail should come Local $ToAddress = $s_ToAddress ; destination address of the email - REQUIRED Local $Subject = $s_Subject ; subject from the email - can be anything you want it to be Local $Body = $s_Body ; the messagebody from the mail - can be left blank but then you get a blank mail Local $AttachFiles = $s_Attachments ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed Local $CcAddress = "" ; address for cc - leave blank if not needed Local $BccAddress = "" ; address for bcc - leave blank if not needed Local $Importance = "Normal" ; Send message priority: "High", "Normal", "Low" Local $Username = $aEMAIL_CONFIG[$EMAIL_CONFIG__20__SMTP_USER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; username for the account used from where the mail gets sent - REQUIRED Local $Password = $aEMAIL_CONFIG[$EMAIL_CONFIG__21__SMTP_PASSWORD][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; password for the account used from where the mail gets sent - REQUIRED Local $IPPort = $aEMAIL_CONFIG[$EMAIL_CONFIG__23__SMTP_PORT_NUMBER][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; port used for sending the mail ; in many country port 25 is not recomended, in such case use 587 instead Local $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS Local $tls = 0 ; enables/disables TLS when required ;~ Local $IPPort = 465 ; GMAIL port used for sending the mail ;~ Local $ssl = 1 ; GMAIL enables/disables secure socket layer sending - put to 1 if using httpS Local $rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) If @error Then MsgBox(0, "Error sending email", "Error code: " & @error & @CRLF & "Description: " & $rc) EndIf EndFunc ;==>_SMTP_SendEmail_Example ; ; ; Com Error Handler Func MyErrFunc(ByRef $oMyError) Local $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1) ; something to check for when this function returns Return EndFunc ;==>MyErrFunc  

       
      EmailConfig.au3 EmailConfig_Example_STMP_Mailer.au3
    • By mLipok
      This UDF was created for give any kind of support for GDPR solutions in AutoIt.
       
       
    • By Zedna
      #include <WinAPI.au3> $text = FileReadLastChars("C:\Program Files\AutoIt3\Include\Array.au3", 1024) MsgBox(0, 'FileReadLastChars', $text) Func FileReadLastChars($sFile, $nChars)     Local $nBytes     $tBuffer = DLLStructCreate("char["&$nChars&"]")     $hFile = _WinAPI_CreateFile($sFile, 2, 2) ; open for read     _WinAPI_SetFilePointer($hFile, -1 * $nChars, 2) ; from end     _WinAPI_ReadFile($hFile, DLLStructGetPtr($tBuffer), $nChars, $nBytes)     _WinAPI_CloseHandle($hFile)     Return DLLStructGetData($tBuffer, 1) EndFunc ; included as standard UDF since AutoIt 3.2.13.6 version Func _WinAPI_SetFilePointer($hFile, $iPos, $iMethod = 0)     $aResult = DllCall( "kernel32.dll", "long", "SetFilePointer", "hwnd", $hFile, "long", $iPos, "long_ptr", 0, "long", $iMethod)     If @error Then Return SetError(1, 0, -1)     If $aResult[0] = -1 Then Return SetError(2, 0, -1) ; $INVALID_SET_FILE_POINTER = -1     Return $aResult[0] EndFunc ;==>_WinAPI_SetFilePointer Here is my topic about _WinAPI_SetFilePointer()
       
      EDIT: simpler version compatible with latest AutoIt
      $text = FileReadLastChars("C:\Program Files\AutoIt3\Include\Array.au3", 1024) MsgBox(0, 'FileReadLastChars', $text) Func FileReadLastChars($sFile , $nChars) $hFile = FileOpen($sFile, 0) ; open for read FileSetPos($hFile, -1 * $nChars, 2) ; from end $sRet = FileRead($hFile) FileClose($hFile) Return $sRet EndFunc  
    • By rudi
      Hello,
      once more I have to see, that my knowledge about XML is too poor, even to use this existing XML UDF
      If it should be a better approach to make use of StringRegEx, or maybe a totally different approach, any suggestions will be mostly appreciated.
       
      I downloaded the ZIP XML_1.1.1.13 and tried to get how to use it from the sample AU3 files included in that ZIP file, well, I don't really get it😵
       
       
      What I want to do:
      My mobile phone's backup contain all the contacts in an XML file. This is an example of such a file, backupinfo.xml, shortened to show just one fictive entry:
       
      <?xml version="1.0" encoding="utf-8" ?> <ContactRecords> <contact> <structuredName> <displayName>Max Mustermann</displayName> <givenName>Max</givenName> <familyName>Mustermann</familyName> <prefixName /> <middleName /> <suffixName /> <phoneticGivenName /> <phoneticMiddleName /> <phoneticFamily /> </structuredName> <organization> <company>Schlosserei Mustermann GmbH</company> <department /> <title /> </organization> <phones> <phone> <number>07652 881 8181</number> <type>home</type> <customLabel /> </phone> <phone> <number>0 800 435 2758</number> <type>work</type> <customLabel /> </phone> <phone> <number>+49 160 4321 222</number> <type>mobile</type> <customLabel /> </phone> </phones> <emails /> <addresses /> <ims /> <WebSites /> <Events /> <note /> <nickName /> <photo /> <netPhone /> <groups> <group> <groupName>Ungrouped</groupName> </group> </groups> </contact> </ContactRecords>  
      Basically I want to search my mobile's contacts for phone numbers to, to see, what contact they belong to. Propably it will make the task much more easy, when standardizing the mobile's contact XML to hold all numbers in "international-notation-without-any-whitespaces" (thats no problem):
       
      <?xml version="1.0" encoding="utf-8" ?> <ContactRecords> <contact> <structuredName> <displayName>Max Mustermann</displayName> <givenName>Max</givenName> <familyName>Mustermann</familyName> <prefixName /> <middleName /> <suffixName /> <phoneticGivenName /> <phoneticMiddleName /> <phoneticFamily /> </structuredName> <organization> <company>Schlosserei Mustermann GmbH</company> <department /> <title /> </organization> <phones> <phone> <number>+4976528818181</number> <type>home</type> <customLabel /> </phone> <phone> <number>+498004352758</number> <type>work</type> <customLabel /> </phone> <phone> <number>+491604321222</number> <type>mobile</type> <customLabel /> </phone> </phones> <emails /> <addresses /> <ims /> <WebSites /> <Events /> <note /> <nickName /> <photo /> <netPhone /> <groups> <group> <groupName>Ungrouped</groupName> </group> </groups> </contact> </ContactRecords>  
      What I would like to get from the XML file as a result, e.g. searching the phone number "+491604321222"
      Present in XML  or not (true) if present then return the values for... type (mobile) givenname (Max) familyname (Mustermann) company (Schlosserei Mustermann GmbH) optional: Other node names and their values within that contact, when not "empty" (like in this examle <emails /> or <middlename />)  
      The values from #2 - #6 would be perfect when returned in a 2D Array, Col0 = name, Col1 = value.
      Regards, Rudi.
       
×
×
  • Create New...