Jump to content
Sign in to follow this  
lansti

Add printer with RunAs

Recommended Posts

lansti

Hi, i'm trying to add a printer with RunAs credentials in a domain environment.
I'm loged on as a local user, and in the startupscript it says:

runas("administrator","domain","******",1,runwait("rundll32 printui.dll,PrintUIEntry /in /n" & "\\printserver\printername" & " /q"))

It will not connect to the domain, and therefor will not install printer.

 

Share this post


Link to post
Share on other sites
gruntydatsun

is the 4th argument right? also do you have the Secondary Logon service running?

Edited by gruntydatsun

Share this post


Link to post
Share on other sites
lansti

I have tried:

runas("administrator","domain","******",0,runwait("rundll32 printui.dll,PrintUIEntry /in /n" & "\\printserver\printername" & " /q"))
runas("administrator","domain","******",1,runwait("rundll32 printui.dll,PrintUIEntry /in /n" & "\\printserver\printername" & " /q"))
runas("administrator","domain","******",2,runwait("rundll32 printui.dll,PrintUIEntry /in /n" & "\\printserver\printername" & " /q"))

EDIT1:
0 - Interactive logon with no profile.
1 - Interactive logon with profile.
2 - Network credentials only.

EDIT2:

Yes, the secondary logon service is running, if i add the printer manually as the user i define in the code, it works.. but not with this code...

Edited by lansti

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • AndyS19
      By AndyS19
      I am trying to print using a small font, but no mater how I try it, the printed font remains unchanged.
      I have created a sample script that sets the font to 8.
      Here are the functions I use to create, then set the font:
      Func _Printer_SetFont($hDC) Local $hFont If ($a__Printer_Font == 0) Then _Printer_MakeFont() EndIf $hFont = $a__Printer_Font _LogMsg("+++: $hDC & " & $hDC & ", $hFont = " & $hFont) _WinAPI_SetFont($hDC, $hFont) ; <===================== EndFunc ;==>_Printer_SetFont Func _Printer_MakeFont() Local $hFontDC, $err, $errm, $str, $flag, $iHeight $flag = $FW_BOLD $iHeight = 8 $hFontDC = _WinAPI_CreateFont( _ $iHeight, _ 0, _ ; average character width 0, _ ; angle of escape 0, _ ; base-line orientation $flag, _ ; font weight - $FW_NORMAL, $FW_BOLD, etc. False, _ ; italic False, _ ; underline False, _ ; strikeout $DEFAULT_CHARSET, _ ; the character set $OUT_DEFAULT_PRECIS, _ ; the output precision $CLIP_DEFAULT_PRECIS, _ ; the clipping precision $DEFAULT_QUALITY, _ ; the output quality 0, _ ; the pitch and family of the font "courier new") ; typeface name _LogMsg("+++: $hFontDC = 0x" & Hex($hFontDC)) If ($hFontDC <= 0) Then $str = "_WinAPI_CreateFont() failed." & @CRLF $err = _WinAPI_GetLastError() $errm = _WinAPI_GetLastErrorMessage() _LogMsg("+++: " & $err & ", 0) - '" & $errm & "'" & @CRLF & $str) Exit (9) EndIf $a__Printer_Font = $hFontDC EndFunc ;==>_Printer_MakeFont Here is the complete script:
      #AutoIt3Wrapper_UseUpx=n #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 Opt('MustDeclareVars', 1) #include <APIDlgConstants.au3> #include <FontConstants.au3> #include <WinAPI.au3> ; #VARIABLES# ================================================================ Global $i__LastLineNum = -1, $i__NextLineNum = -1, $i__ThisLineNum = -1 Global $i__LeftMargin_X, $i__TopMargin_Y, $i__PageWidth, $i__PageHeight Global $i__CurrentPos_X, $i__CurrentPos_Y Global $i__Printer_Char_H = -1, $i__Printer_Char_W = -1 Global $a__Printer_Font = 0 Global $i__x_start, $i__x_end, $i__y_start, $i__y_end ; ============================================================================ ; #CONSTANTS# ================================================================ Global $PHYSICALWIDTH = 110, $PHYSICALHEIGHT = 111 Global $PHYSICALOFFSETX = 112, $PHYSICALOFFSETY = 113 Const $VLINESPACE = 20 ; Number of pixels between lines Global Const $tagPD = "align 1;DWORD lStructSize;" & "HWND hwndOwner;" & "handle hDevMode;" & "handle hDevNames;" & _ "handle hDC;" & "DWORD Flags;" & _ "WORD nFromPage;" & "WORD nToPage;" & "WORD nMinPage;" & "WORD nMaxPage;" & "WORD nCopies;" & _ "handle hInstance;" & "LPARAM lCustData;" & "ptr lpfnPrintHook;" & "ptr lpfnSetupHook;" & _ "ptr lpPrintTemplateName;" & "ptr lpSetupTemplateName;" & "handle hPrintTemplate;" & "handle hSetupTemplate" Global Const $tagDOCINFO = "int Size;" & "ptr DocName;" & "ptr Output;" & "ptr Datatype;" & "dword Type" ; ============================================================================ _Main() Func _Main() Local $hDC, $str, $str2 = "", $linenum $hDC = _Printer_Open(0, Default, "DOCNAME: ++++") _LogMsg("+++: $hPrintDc = 0x" & Hex($hDC)) If (Not $hDC) Then Exit (1) _Printer_SetFont($hDC) For $y = 1 To 10 $str2 &= "123456789." Next $linenum = 30 ; Start in the middle of the page For $x = 1 To 15 $str = "[" & $x & " " & $str2 _LogMsg("+++: $str ==>" & $str & "<==") _Printer_PrintTextLine($hDC, $str, $linenum) $linenum += 1 Next _Printer_Close($hDC) EndFunc ;==>_Main Func _Printer_SetFont($hDC) Local $hFont If ($a__Printer_Font == 0) Then _Printer_MakeFont() EndIf $hFont = $a__Printer_Font _LogMsg("+++: $hDC & " & $hDC & ", $hFont = " & $hFont) _WinAPI_SetFont($hDC, $hFont) ; <===================== EndFunc ;==>_Printer_SetFont Func _Printer_MakeFont() Local $hFontDC, $err, $errm, $str, $flag, $iHeight $flag = $FW_BOLD $iHeight = 8 $hFontDC = _WinAPI_CreateFont( _ $iHeight, _ 0, _ ; average character width 0, _ ; angle of escape 0, _ ; base-line orientation $flag, _ ; font weight - $FW_NORMAL, $FW_BOLD, etc. False, _ ; italic False, _ ; underline False, _ ; strikeout $DEFAULT_CHARSET, _ ; the character set $OUT_DEFAULT_PRECIS, _ ; the output precision $CLIP_DEFAULT_PRECIS, _ ; the clipping precision $DEFAULT_QUALITY, _ ; the output quality 0, _ ; the pitch and family of the font "courier new") ; typeface name _LogMsg("+++: $hFontDC = 0x" & Hex($hFontDC)) If ($hFontDC <= 0) Then $str = "_WinAPI_CreateFont() failed." & @CRLF $err = _WinAPI_GetLastError() $errm = _WinAPI_GetLastErrorMessage() _LogMsg("+++: " & $err & ", 0) - '" & $errm & "'" & @CRLF & $str) Exit (9) EndIf $a__Printer_Font = $hFontDC EndFunc ;==>_Printer_MakeFont Func _Printer_Open($hGUI = 0, $iFlags = Default, $sDocName = "") Local $hDC, $tPD, $err If $iFlags = Default Then $iFlags = 0 $iFlags = BitOR($iFlags, $PD_RETURNDC) $iFlags = BitOR($iFlags, $PD_USEDEVMODECOPIESANDCOLLATE) EndIf $tPD = DllStructCreate($tagPD) DllStructSetData($tPD, "lStructSize", DllStructGetSize($tPD)) DllStructSetData($tPD, "hwndOwner", $hGUI) ; If $hGUI <> 0 Then DllStructGetData($tPD, "hInstance", _WinAPI_GetModuleHandle("")) EndIf DllStructSetData($tPD, "Flags", $iFlags) DllStructSetData($tPD, "nCopies", 2) Local $bRet = DllCall("Comdlg32.dll", "int", "PrintDlgW", "ptr", DllStructGetPtr($tPD)) $err = @error If $err Then $err = _WinAPI_GetLastError() Local $errm = _WinAPI_GetLastErrorMessage() _LogMsg("+++: _Printer_Open() returns: (1, " & $err & ", 0) - '" & $errm & "'") $tPD = 0 Return SetError(1, $err, 0) EndIf If $bRet[0] = True Then $hDC = DllStructGetData($tPD, "hDC") Else Return SetError(2, $err, 0) EndIf $tPD = 0 __Printer_SetupCharWH($hDC) _Printer_GetMetrics($hDC) _Printer_Startup($hDC, $sDocName) Return (SetError(0, 0, $hDC)) EndFunc ;==>_Printer_Open Func _Printer_Startup($hDC, $sDocName) Local $oDocNameStruct, $DOCINFO, $printJobID, $errstr __Printer_SetupCharWH($hDC) ; Get the height and width of a printer character $oDocNameStruct = DllStructCreate("char DocName[" & StringLen($sDocName & Chr(0)) & "]") DllStructSetData($oDocNameStruct, "DocName", $sDocName & Chr(0)) ; Size of DOCINFO structure $DOCINFO = DllStructCreate($tagDOCINFO) ; Structure for Print Document info DllStructSetData($DOCINFO, "Size", 20) ; Size of DOCINFO structure DllStructSetData($DOCINFO, "DocName", DllStructGetPtr($oDocNameStruct)) ; Set name of print job (Optional) _Printer_GetMetrics($hDC) $printJobID = _Printer_StartDoc($hDC, $DOCINFO) ; start new print doc If ($printJobID <= 0) Then $errstr = "_Printer_StartDoc() failed" _LogMsg("+++: _Printer_Startup() returns: @error = 1 - " & $errstr) Return (SetError(1, 0, $errstr)) EndIf Return (SetError(0, 0, $printJobID)) ; print job ID EndFunc ;==>_Printer_Startup Func _Printer_Close($hDC) _Printer_EndPage($hDC) ; End the currend page _Printer_EndDoc($hDC) ; End the print job _WinAPI_DeleteDC($hDC) ; Delete the printer device context EndFunc ;==>_Printer_Close Func _Printer_EndPage($hDC) Local $aResult If ($i__ThisLineNum > 1) Then $aResult = DllCall("GDI32.dll", "long", "EndPage", "hwnd", $hDC) EndIf _Printer_SetInitial_XY() $i__ThisLineNum = -1 Return ($aResult[0]) EndFunc ;==>_Printer_EndPage Func _Printer_EndDoc($hDC) Local $aResult $aResult = DllCall("GDI32.dll", "long", "EndDoc", "hwnd", $hDC) Return ($aResult[0]) EndFunc ;==>_Printer_EndDoc Func _Printer_TextOut($hDC, $iXStart, $iYStart, $sString) Local $aResult $aResult = DllCall("GDI32.dll", _ "long", "TextOut", _ "hwnd", $hDC, _ "long", $iXStart, _ "long", $iYStart, _ "str", $sString, _ "long", StringLen($sString)) Return $aResult[0] ; 0 = fail, 1 = OK EndFunc ;==>_Printer_TextOut Func _Printer_PrintTextLine($hDC, $sText, $iLineNumber = -1) Local $ret, $lines, $ndx If ($iLineNumber <= 0) Then $iLineNumber = $i__ThisLineNum EndIf $sText = StringStripWS($sText, 2) ; Clear trailing whitespace ; Break text into an array of lines, based on any of the ; usual line endings (@CR, @LF, etc.) found in the string. $sText = StringRegExpReplace($sText, "[\\][n]", @CR) $sText = StringReplace($sText, @CRLF, @LF) $sText = StringReplace($sText, @CR, @LF) While (StringRight($sText, 1) == @LF) StringTrimRight($sText, 1) ; remove trailing LF's WEnd $lines = StringSplit($sText, @LF, 2) ; Now print each line in the array of lines, advancing the ; printer line position each time For $ndx = 0 To UBound($lines) - 1 $i__CurrentPos_X = $i__x_start ; $i__LeftMargin_X $i__CurrentPos_Y = (($i__Printer_Char_H + $VLINESPACE) * $iLineNumber) + $i__y_start $ret = _Printer_TextOut($hDC, $i__CurrentPos_X, $i__CurrentPos_Y, $lines[$ndx]) $iLineNumber += 1 $i__ThisLineNum += 1 If ($ret == 0) Then ExitLoop If ($iLineNumber > $i__LastLineNum) Then _Printer_EndPage($hDC) $iLineNumber = 1 $i__ThisLineNum = 1 EndIf Next ; Calculate next x/y position $i__CurrentPos_Y = (($i__Printer_Char_H + $VLINESPACE) * $iLineNumber) Return (SetError(0, 0, $iLineNumber)) EndFunc ;==>_Printer_PrintTextLine Func _Printer_StartDoc($hDC, $tDocInfo) Local $aResult $aResult = DllCall("GDI32.dll", "long", "StartDoc", "hwnd", $hDC, "ptr", DllStructGetPtr($tDocInfo)) _Printer_SetInitial_XY() Return ($aResult[0]) ; >0 = OK, <=0 = Fail EndFunc ;==>_Printer_StartDoc Func _Printer_GetMetrics($hDC) $i__LeftMargin_X = _WinAPI_GetDeviceCaps($hDC, $PHYSICALOFFSETX) $i__TopMargin_Y = _WinAPI_GetDeviceCaps($hDC, $PHYSICALOFFSETY) $i__PageWidth = _WinAPI_GetDeviceCaps($hDC, $PHYSICALWIDTH) $i__PageHeight = _WinAPI_GetDeviceCaps($hDC, $PHYSICALHEIGHT) #Tidy_Off _LogMsg("+++:" & @CRLF _ & "$PHYSICALOFFSETX [" & $PHYSICALOFFSETX & "] $i__LeftMargin_X = " & $i__LeftMargin_X & @CRLF _ & "$PHYSICALOFFSETY [" & $PHYSICALOFFSETY & "] $i__TopMargin_Y = " & $i__TopMargin_Y & @CRLF _ & "$PHYSICALWIDTH [" & $PHYSICALWIDTH & "] $i__PageWidth = " & $i__PageWidth & @CRLF _ & "$PHYSICALHEIGHT [" & $PHYSICALHEIGHT & "] $i__PageHeight = " & $i__PageHeight & @CRLF _ ) #Tidy_On $i__x_start = $i__LeftMargin_X - 75 $i__y_start = $i__TopMargin_Y - 75 $i__x_end = $i__PageWidth - 250 $i__y_end = $i__PageHeight - 200 _Printer_SetInitial_XY() $i__LastLineNum = _Printer_GetLastLineNum() EndFunc ;==>_Printer_GetMetrics Func _Printer_SetInitial_XY() $i__CurrentPos_X = $i__LeftMargin_X $i__CurrentPos_Y = $i__TopMargin_Y * 22 EndFunc ;==>_Printer_SetInitial_XY Func _Printer_GetLastLineNum() Local $x1, $y, $linenumber $linenumber = -1 If ($i__Printer_Char_H > 0) Then For $x1 = 1 To 999 $y = (($i__Printer_Char_H + $VLINESPACE) * ($x1 + 1)) If ($y >= $i__y_end) Then $linenumber = $x1 ExitLoop EndIf Next EndIf If ($linenumber == -1) Then MsgBox(0, "Internal Error", "ERROR: Could not calculate the last line number") Exit (1) EndIf $linenumber -= 1 Return ($linenumber) EndFunc ;==>_Printer_GetLastLineNum Func __Printer_SetupCharWH($hDC) Local $vExtents $vExtents = _WinAPI_GetTextExtentPoint32($hDC, "x") $i__Printer_Char_W = DllStructGetData($vExtents, "X") ; Get the width of a character $i__Printer_Char_H = DllStructGetData($vExtents, "Y") ; Get the height of a character EndFunc ;==>__Printer_SetupCharWH Func _LogMsg($msg, $lnum = @ScriptLineNumber) If (StringLeft($msg, 4) = "+++:") Then $msg = StringTrimLeft($msg, 5) $msg = StringStripWS($msg, 3) ConsoleWrite("+++:" & $lnum & "] " & $msg & @CRLF) EndFunc ;==>_LogMsg Func _Printer_SetFont($hDC) Local $hFont If ($a__Printer_Font == 0) Then _Printer_MakeFont() EndIf $hFont = $a__Printer_Font _LogMsg("+++: $hDC & " & $hDC & ", $hFont = " & $hFont) _WinAPI_SetFont($hDC, $hFont) ; <===================== EndFunc ;==>_Printer_SetFont Func _Printer_MakeFont() Local $hFontDC, $err, $errm, $str, $flag, $iHeight $flag = $FW_BOLD $iHeight = 8 $hFontDC = _WinAPI_CreateFont( _ $iHeight, _ 0, _ ; average character width 0, _ ; angle of escape 0, _ ; base-line orientation $flag, _ ; font weight - $FW_NORMAL, $FW_BOLD, etc. False, _ ; italic False, _ ; underline False, _ ; strikeout $DEFAULT_CHARSET, _ ; the character set $OUT_DEFAULT_PRECIS, _ ; the output precision $CLIP_DEFAULT_PRECIS, _ ; the clipping precision $DEFAULT_QUALITY, _ ; the output quality 0, _ ; the pitch and family of the font "courier new") ; typeface name _LogMsg("+++: $hFontDC = 0x" & Hex($hFontDC)) If ($hFontDC <= 0) Then $str = "_WinAPI_CreateFont() failed." & @CRLF $err = _WinAPI_GetLastError() $errm = _WinAPI_GetLastErrorMessage() _LogMsg("+++: " & $err & ", 0) - '" & $errm & "'" & @CRLF & $str) Exit (9) EndIf $a__Printer_Font = $hFontDC EndFunc ;==>_Printer_MakeFont Here is the full script.  Run it to see the problem:
    • PINTO1927
      By PINTO1927
      HI GUYS,
      I'm trying to run this script with an advanced domain user, but when compiling the cmd it returns access denied, as if it did not recognize the user of AD.
       
      RunAsWait("administrator", "CONTOSO", "Services.1", 2, "C:\Users\albert.frizz\Desktop\test.bat")
       
      can you help me please?
    • jguinch
      By jguinch
      Here is an UDF for managing printers.
      Features are :
       - add, remove or rename a printer
       - add or remove a driver
       - add or remove a TCP/IP printer port
       - add or remove a LPR printer port
       - connect to a remote printer
       - enum printers and there configuration and properties
       - pause resume or cancel all jobs of a printer
       - checks if a printer exists
       - print a test page
       - set the default printer
    • Traskiz
      By Traskiz
      Hello,
       
      I have a problem, I cant run script as administrator in Windows 10:
      main.exe:
      RegWrite('HKLM\SOFTWARE\Policies\Microsoft\Windows\BITS', 'EnableBITSMaxBandwidth','REG_DWORD',Number('1'))
      RegWrite('HKLM\SOFTWARE\Policies\Microsoft\Windows\BITS', 'MaxTransferRateOnSchedule','REG_DWORD',Number('100'))
      RegWrite('HKLM\SOFTWARE\Policies\Microsoft\Windows\BITS', 'MaxBandwidthValidFrom','REG_DWORD',Number('7'))
      RegWrite('HKLM\SOFTWARE\Policies\Microsoft\Windows\BITS', 'MaxBandwidthValidTo','REG_DWORD',Number('22'))
      RegWrite('HKLM\SOFTWARE\Policies\Microsoft\Windows\BITS', 'UseSystemMaximum','REG_DWORD',Number('1'))
      RegWrite('HKLM\SOFTWARE\Policies\Microsoft\Windows\BITS', 'MaxTransferRateOffSchedule','REG_DWORD',Number('400'))
      run.exe:
      Global $sUserName = "administrator"
      Global $sPassword = "pass"
      Global $sDomain = "domain"
      RunAsWait($sUserName, $sDomain, $sPassword, 2, "main.exe", "", @TempDir)
      If I run "run.exe" it dont work...
      If  I change main.exe to this:
      msgbox(1,"",@username)        
      and it runs and shows administrator in message box... but it cant elevate main.exe with RegWrite() command...
       
      I tried using #RequireAdmin in first line of main.exe, but it not worked... UAC is set to "do not notify"
       
       
      This method of elevation worked on Windows 7 and Windows XP...
      Please help!
    • Surf243
      By Surf243
      Hello,
      I've been using this UDF to set ACL permissions to some network folders, everything works great (no issues). However, I want to apply these permissions using elevated domain credentials supplied by the user and not the user that's currently running the script. As a temporary solution, I've implemented a RunAs function, but that's not the solution I'm looking for. I'm not fluent with using Dlls, but I have been trying out different methods.
      My RunAs Function:
      Func _RunAs($sUser, $sPass) If @Compiled Then RunAs($sUser, @LogonDomain, $sPass, 4, FileGetShortName(@ScriptFullPath), "", @SW_MAXIMIZE) Else RunAs($sUser, @LogonDomain, $sPass, 4, FileGetShortName(@AutoItExe) & " " & FileGetShortName(@ScriptFullPath), "", @SW_MAXIMIZE) EndIf EndFunc ;==>_RunAs I tried LogonUser and I know that I can take that token to ImpersonateLoggedOnUser, but I'm not sure how to implement that or if that's even the right method. I also need to RevertToSelf once completed.
      Func _LogonUser($sUsername, $sPassword, $sServer = @LogonDomain) ; Returns True if user exists Local $stToken $stToken = DllStructCreate("int") Local $aRet = DllCall("advapi32.dll", "int", "LogonUser", _ "str", $sUsername, "str", $sServer, "str", $sPassword, "dword", 3, "dword", 0, "ptr", DllStructGetPtr($stToken)) ;$hToken = DllStructGetData($stToken, 1) If Not @error And $aRet[0] <> 0 Then Return True EndIf Return False EndFunc ;==>_LogonUser Any assistance, suggestions or idea's would be helpful.
      Thanks!
×