Jump to content
HariKara

AutoIt RunAs vs Run COmmands

Recommended Posts

Hi AutoIters!

 

Im trying to launch a .exe file that is nested within the program files (x86) folder structure. i have already used the standard RunAs Syntax and found that it fails to launch the application. I have switched to Run and that seems to work. My issue is I have to use RunAs as the applicaton would need to run under a completely different account. The Current logged in user is a Local User on the machine, however, the application must be run as a domain user. The Machine is domain connected.

 

 have tried the following:

RunAs("username","logonpassword", $RUN_LOGON_PROFILE, "D:\Program Files (x86)\Vendor\Application Name\Exe Location\Executable.exe")

The above fails to launch, there are no errors or syntax issues, it just does nothing when the variables are replaced for the correct values.

I did the same using the Run command

Run("D:\Program Files (x86)\Vendor\Application Name\Exe Location\Executable.exe")

That seems to work fine, but runs in local user context. Any thoughts? Could it be a local Machine rights issue? Or have i missed something glaring in my script

Share this post


Link to post
Share on other sites

Hi @HariKara:)
Look closer in the Help file!

This:

RunAs("username","logonpassword", $RUN_LOGON_PROFILE, "D:\Program Files (x86)\Vendor\Application Name\Exe Location\Executable.exe")

Should be:

RunAs("username","DOMAINTOAUTHENTICATEAGAINST", "logonpassword", $RUN_LOGON_PROFILE, "D:\Program Files (x86)\Vendor\Application Name\Exe Location\Executable.exe")

Try this, and let us know :)


Click here to see my signature:

Spoiler

Thoughts:

  • I will always thank you for the time you spent for me.
    I'm here to ask, and from your response, I'd like to learn.
    By my knowledge, I can help someone else, and "that someone" could help in turn another, and so on.

/*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/

ALWAYS GOOD TO READ:

 

Share this post


Link to post
Share on other sites

Yeah pretty hard to use domain's credentials without setting the domain's name ;)


My video tutorials : HERE ( In construction )  || My Discord : https://discord.gg/S9AnwHw

How to Ask Help ||  UIAutomation From Junkew || WebDriver From Danp2 || And Water's UDFs in the Quote

Spoiler

 Water's UDFs:
Active Directory (NEW 2018-10-19 - Version 1.4.10.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (2018-10-31 - Version 1.3.4.1) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
 
Tutorials:

ADO - Wiki

 

Share this post


Link to post
Share on other sites
4 hours ago, caramen said:

Yeah pretty hard to use domain's credentials without setting the domain's name ;)

The machine has no domain?

If you can use:
@LogonDomain

Share this post


Link to post
Share on other sites

It is not the machin’s domaine it’s the credentials domain. You can use domain’s credentials on local session.


My video tutorials : HERE ( In construction )  || My Discord : https://discord.gg/S9AnwHw

How to Ask Help ||  UIAutomation From Junkew || WebDriver From Danp2 || And Water's UDFs in the Quote

Spoiler

 Water's UDFs:
Active Directory (NEW 2018-10-19 - Version 1.4.10.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (2018-10-31 - Version 1.3.4.1) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
 
Tutorials:

ADO - Wiki

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Pike
      Hey Everyone, I haven't been here in a while and recently picked up my old project. Still an FNG!
      To the point: I want to be able to push the button and either play an mp3, open a file, or open an exe program (all with the same button). The problem is that I don't know how to code for that at "case 1"
              Case 1                                                                                                                                             
                  Local $sRead = IniRead("config.ini", "Config", "One", "Default")                                
                  SoundPlay($sRead, @HotKeyPressed)                                                                     <-------------------------------
                  Run($sRead, @HotKeyPressed)                                                                                 <------------------------------- This 'Run' doesn't work even by itself!
      See code below for layout. If you need more information I will attach more code or answer any questions. Any help is greatly appreciated.
       
      Much Respect,
      Pike
       
      Func _HandleButton() $iClickCount += 1 $iTimer = TimerInit() AdlibRegister("CheckButtonPress", $CheckTime) EndFunc Func CheckButtonPress() If TimerDiff($iTimer) < $CheckTime Or $iTimer = 0 Then Return Switch $iClickCount Case 1 Local $sRead = IniRead("config.ini", "Config", "One", "Default") SoundPlay($sRead, @HotKeyPressed) Run($sRead, @HotKeyPressed) Case 2 MsgBox(0, "INFORMATION:", "Choose the file you want designated to this button") Local $sFileOpenDialog = FileOpenDialog(0, @ScriptDir & "\", "All (*.*)", $FD_FILEMUSTEXIST + $FD_MULTISELECT) If @error Then MsgBox($MB_SYSTEMMODAL, "", "No file(s) were selected.") EndIf Local $sFileName = InputBox("INFORMATION:", "Please Name Your File?" & @CRLF _ & @CRLF _ & "6 Characters or Less", "") IniWrite(@ScriptDir & "\config.ini", "Config", "One", $sFileOpenDialog) IniWrite(@ScriptDir & "\config.ini", "Config", "NameOne", $sFileName) EndSwitch $iClickCount = 0 AdlibUnRegister() EndFunc  

    • By Skeletor
      Hey All,
      Yes, this is an odd request. 
      But is there a way to bulk up the size of the compiled program? 
      I know many want to reduce it's size, but I want to increase it.
      What methods do you suggest?
    • By dimm
      Is it possible to compile script without any icon resources included?
      When I make exe it uses default system icon of current OS even if I compile as console application.
      On other versions of Windows it looks a little strange

       
      Update:
      It seems that the only way is remove icons from exe after compilation using resource editors like ResHacker.

       
      another bad solution:
      Using corrupted 35 bytes icon file. Windows can't load it and shows default system icon.
      #pragma compile(Icon, broken.ico) broken.ico
    • By AnonymousX
      So I just got a new computer, and instantly went and installed Autoit onto it. I selected run script as default action when clicking on an au3 file, however every time I do this it opens the script in the editor. I can from there run the script no problem.
      I've tried reinstalling and checking the settings by hitting "Ctrl+1" and have confirmed it is set to run, but yet it just continues to open in the editor.
      Any ideas why this is happening or how to solve?
      New system is windows 10, old was windows 7
    • By SanCon
      Greetings,
      I've found and used @TheDcoder's ProcessEX UDF, and have found it and invaluable tool in my scripting arsenal. Recently, I found myself needing to create a script which then attempts to run another program as a different user. I was able to heavily borrow from the _Process_RunCommand function to create _Process_RunAsCommand:
      ; #FUNCTION# ==================================================================================================================== ; Name ..........: _Process_RunAsCommand ; Description ...: Runs a command or an executable under a different user security privilege. ; Syntax ........: _Process_RunAsCommand($iMode, $sUserName, $sUserPass, $sUserDomain, $sExecutable [, $sWorkingDir = @TempDir [, $iRunOptFlag = $STDERR_MERGED]]) ; Parameters ....: $iMode - Mode in which this function should operate, See Remarks. ; $sUserName - User name under which you would like to run the command/executable. ; $sUserPass - Password for $sUserName. ; $sUserDomain - Domain name to which the $sUserName belongs. ; $sExecutable - The command to run/execute (along with any arguments). ; $sWorkingDir - [optional] The working directroy for the command. Default is @TempDir. $sUserName must have ; privileges to create/modify files on this directory. ; $iRunOptFlag - [optional] The Opt flag for the Run function. Default is $STDERR_MERGED. ; Return values .: Success: Mode $PROCESS_RUN : Will return the process handle & @extended will contain the PID of the command ; Mode $PROCESS_RUNWAIT : Will return the output & @extended will contain the exit code for the function ; Failure: Will return False & @error will contain: ; 1 - If the $iMode flag is invalid ; 2 - If the command is invalid ; Author ........: J. Sanchez, heavily borrowing from code by TheDcoder ; Modified ......: N/A ; Remarks .......: 1. The ONLY valid modes are: $PROCESS_RUN & $PROCESS_RUNWAIT ; $PROCESS_RUN : Will act similarly to Run function, See Return values ; $PROCESS_RUNWAIT : Will act similarly to RunWait function, See Return values ; If you use $PROCESS_RUN then use _Process_GetExitCode to get the exit code & use StdoutRead to get the output of the command ; 2. Use $PROCESS_COMMAND to run commands like this: $PROCESS_COMMAND & "ping 127.0.0.1" ; 3. Add $PROCESS_DEBUG to $iMode to automagically debug the command, $PROCESS_RUN is equivalent to $PROCESS_RUNWAIT in this case ; Related .......: RunAs, RunWait ; Link ..........: http://bit.ly/ProcessUdfForAutoIt ; Example .......: Yes, see example.au3 ; ===============================================================================================================================; Functions Func _Process_RunAsCommand($iMode, $sUserName, $sUserPass, $sUserDomain, $sExecutable, $sWorkingDir = @TempDir, $iRunOptFlag = $STDERR_MERGED) Local $iExitCode = 0 ; Declare the exit code variable before hand Local $sOutput = "" ; Declare the output variable before hand Local $bDebug = False ; Declare the debug variable before hand If BitAND($iMode, $PROCESS_DEBUG) Then $bDebug = True If BitAND($iMode, $PROCESS_RUN) Then $iMode = $PROCESS_RUN ElseIf BitAND($iMode, $PROCESS_RUNWAIT) Then $iMode = $PROCESS_RUNWAIT Else Return SetError(1, 0, False) EndIf ; If Not $iMode = $PROCESS_RUN Or Not $iMode = $PROCESS_RUNWAIT Then Return SetError(1, 0, False) ; If the mode is invalid... ;Local $iPID = Run($sExecutable, $sWorkingDir, @SW_HIDE, $iRunOptFlag) ; Run!!! :P Local $iPID = RunAs($sUserName,$sUserDomain,$sUserPass,BitAND(0,4),$PROCESS_COMMAND & " " & $sExecutable,$sWorkingDir,@SW_HIDE,$iRunOptFlag) If @error Then Return SetError(2, @error, False) ; If the command is invalid... Local $hProcessHandle = _Process_GetHandle($iPID) ; Get the handle of the process If $iMode = $PROCESS_RUN Then If Not $bDebug Then Return SetExtended($iPID, $hProcessHandle) ; If the function is in Run mode then return the PID & Process Handle $sOutput = _Process_DebugRunCommand($hProcessHandle, $iPID) ; Debug the process $iExitCode = _Process_GetExitCode($hProcessHandle) ; Note the exit code Return SetExtended($iExitCode, $sOutput) ; Return the output & exit code EndIf If Not $bDebug Then While ProcessExists($iPID) $sOutput &= StdoutRead($iPID) ; Capture the output Sleep(250) ; Don't kill the CPU WEnd $sOutput &= StdoutRead($iPID) ; Capture any remaining output $iExitCode = _Process_GetExitCode($hProcessHandle) ; Note the exit code Return SetExtended($iExitCode, $sOutput) ; Return the exit code & the output :D EndIf $sOutput = _Process_DebugRunCommand($hProcessHandle, $iPID) ; Debug the process $iExitCode = _Process_GetExitCode($hProcessHandle) ; Note the exit code Return SetExtended($iExitCode, $sOutput) ; Return the output & exit code EndFunc The issue that I currently have is that, regardless of what the errorlevel returned by the program being executed, the errorlevel returned by the _Process_RunAsCommand is 259, which, according to this page it means that there's no more data (I'm guessing from the STDIO and STDERR?)
      Any guidance would be greatly appreciated.
×
×
  • Create New...