Jump to content
Sign in to follow this  
aNewLyfe

Read File Partially (Range) [SOLVED]

Recommended Posts

aNewLyfe

Hi there. I'm trying to make a resumable winHttp upload.

But stuck at reading a file within byte ranges. Tried line functions (filereadline, _filecountlines) but nothing.

The file im trying to upload is a video (binary) file.

I have to read byte ranges to upload my video partially.

is there any udf like fileread($file, startingbytes, endingbytes)

any help will be appreciated :)

Edited by aNewLyfe

:alien: ~ Every Living Thing is a Code Snippet of World Application ~ :alien:

Share this post


Link to post
Share on other sites
MikahS

Snips & Scripts


My Snips: graphCPUTemp ~ getENVvars
My Scripts: Short-Order Encrypter - message and file encryption V1.6.1 ~ AuPad - Notepad written entirely in AutoIt V1.9.4

Feel free to use any of my code for your own use.                                                                                                                                                           Forum FAQ

 

Share this post


Link to post
Share on other sites
aNewLyfe

Ah thanks for reply. Solved it by BinaryLen and BinaryMid functions. Sorry for asking before check :(


:alien: ~ Every Living Thing is a Code Snippet of World Application ~ :alien:

Share this post


Link to post
Share on other sites
MikahS

Glad you found a solution that worked for you. ^_^


Snips & Scripts


My Snips: graphCPUTemp ~ getENVvars
My Scripts: Short-Order Encrypter - message and file encryption V1.6.1 ~ AuPad - Notepad written entirely in AutoIt V1.9.4

Feel free to use any of my code for your own use.                                                                                                                                                           Forum FAQ

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • dadalt95
      By dadalt95
      Hi!
      I want to get the signal in this website:
      https://binary-signal.com/pt/chart/eurusd
      I have tried using _IEBodyReadText  and some _StringBetween. What happens is that the text are being update every tick and _IEBodyReadText doesn't.
      To perform the update I used  _IEAction($oIE, "refresh") but it's not good because the website block me after some time due too many requests..
      Is there any other way to get this text every tick?
      PS: The text I want to get is WAIT, CALL or PUT.
       
      Here is the code:
      global $oIE = _IECreate ('https://binary-signal.com/pt/chart/eurusd', 0, 1 , 1 , 0) Local $sText = _IEBodyReadText($oIE) $result = _StringBetween ( $sText , 'PUTEUR/USD on Binary-signal.com', 'sinal está PRONTA') ;MsgBox ( 0, "asf", $result[0]) $espera=StringInStr($result[0], "WAIT") $compra=StringInStr($result[0], "CALL") $venda=StringInStr($result[0], "PUT") ;MsgBox($MB_SYSTEMMODAL, "", $espera) $n=0 $c=0 Captar() Func Captar() ;_IENavigate($oIE, "https://binary-signal.com/pt/chart/eurusd") ;MsgBox($MB_SYSTEMMODAL, "", $n) Local $sText = _IEBodyReadText($oIE) $result = _StringBetween ( $sText , 'PUTEUR/USD on Binary-signal.com', 'sinal está PRONTA') If (Not $compra=0) And $n=0 Then MsgBox($MB_SYSTEMMODAL, "", "COMPRE") $n=1 $c=$c+1 ;_IEAction($oIE, "refresh") Sleep(60000) Captar() ElseIf (Not $venda=0) And $n=0 Then MsgBox($MB_SYSTEMMODAL, "", "VENDA") $c=$c+1 $n=1 ;_IEAction($oIE, "refresh") ;MsgBox($MB_SYSTEMMODAL, "", $n) Sleep(60000) Captar() ElseIf (Not $venda=0) And $n=1 Then ;MsgBox($MB_SYSTEMMODAL, "", "Esperando próxima rodada") $n=1 ;MsgBox($MB_SYSTEMMODAL, "", $n) ;_IEAction($oIE, "refresh") Sleep(60000) Captar() ElseIf (Not $venda=0) And $n=1 Then ;MsgBox($MB_SYSTEMMODAL, "", "Esperando próxima rodada") $n=1 ;MsgBox($MB_SYSTEMMODAL, "", $n) ;_IEAction($oIE, "refresh") Sleep(60000) Captar() Else ;MsgBox("", "", "ESPERE") $n=0 Sleep(1000) ;_IEAction($oIE, "refresh") Local $sText = _IEBodyReadText($oIE) $result = _StringBetween ( $sText , 'PUTEUR/USD on Binary-signal.com', 'sinal está PRONTA') Captar() EndIf EndFunc  
    • Trisha
      By Trisha
      Hello,
      I Have clicked on save as option to save a file, while doing that I need to rename a file appending with sysdate. I have searched in google find the below one line of code:
      FileMove("C:\somefile.txt", "C:\somefile1.txt"), When I am trying to append with sysdate. It is not happening. Please help me out  with the small issue.
    • MrCheese
      By MrCheese
      Hi guys,
       
      Wondering, is there a better way, likely to use 'for...next' to add a letter to each range, by moving right -> along a range of columns in excel.
      I currently use this, but its clunky.
      If $run = 1 Then $range = "B6:B41" If $run = 2 Then $range = "C6:C41" If $run = 3 Then $range = "D6:D41" If $run = 4 Then $range = "E6:E41" If $run = 5 Then $range = "F6:F41" If $run = 6 Then $range = "G6:G41" If $run = 7 Then $range = "H6:H41" If $run = 8 Then $range = "I6:I41" If $run = 9 Then $range = "J6:J41" If $run = 10 Then $range = "K6:K41" If $run = 11 Then $range = "L6:L41" If $run = 12 Then $range = "M6:M41" If $run = 13 Then $range = "N6:N41" If $run = 14 Then $range = "O6:O41" If $run = 15 Then $range = "P6:P41" If $run = 16 Then $range = "Q6:Q41" If $run = 17 Then $range = "R6:R41" If $run = 18 Then $range = "S6:S41" If $run = 19 Then $range = "T6:T41" If $run = 20 Then $range = "U6:U41" If $run = 21 Then $range = "V6:V41" If $run = 22 Then $range = "W6:W41" If $run = 23 Then $range = "X6:X41" If $run = 24 Then $range = "Y6:Y41" If $run = 25 Then $range = "Z6:Z41" If $run = 26 Then $range = "AA6:AA41" If $run = 27 Then $range = "AB6:AB41" If $run = 28 Then $range = "AC6:AC41" If $run = 29 Then $range = "AD6:AD41" If $run = 30 Then $range = "AE6:AE41" If $run = 31 Then $range = "AF6:AF41" If $run = 32 Then $range = "AG6:AG41" If $run = 33 Then $range = "AH6:AH41" If $run = 34 Then $range = "AI6:AI41" If $run = 35 Then $range = "AJ6:AJ41" If $run = 36 Then $range = "AK6:AK41" If $run = 37 Then $range = "AL6:AL41" If $run = 38 Then $range = "AM6:AM41" If $run = 39 Then $range = "AN6:AN41" If $run = 40 Then $range = "AO6:AO41" If $run = 41 Then $range = "AP6:AP41" If $run = 42 Then $range = "AQ6:AQ41" If $run = 43 Then $range = "AR6:AR41" If $run = 44 Then $range = "AS6:AS41" If $run = 45 Then $range = "AT6:AT41" If $run = 46 Then $range = "AU6:AU41" If $run = 47 Then $range = "AV6:AV41" If $run = 48 Then $range = "AW6:AW41" If $run = 49 Then $range = "AX6:AX41" If $run = 50 Then $range = "AY6:AY41"  
      Normally, if it was going down the rows, i'd use this:
       
      For $i = 0 To UBound($iRowCount) - 1 $row = $i + 1 $range = "B"&$row&":B"&$row+1 Next  
      so something like this, but i don't know how to code sequential columns:
      For $i = 0 To UBound($iColCount) - 1 $col = $i + 1 $range = $col&"1:"&$col&"40" Next  
      If I don't make sense, let me know.
      Any help would be great. thanks
    • lewisg
      By lewisg
      Suddenly a RunWait command has stop working after 2 years of no errors, issues, or problems. The code uses RunWait to start Plink.exe, a command-line remote connection tool similar to UNIX ssh. I'm using it to ssh to a linux (Centos) machine, run a Perl script, and redirect the output to a file on a PC running the AutoIt script.  
       
      $FilePath = "C:\AutoIT\LED" $FilePathPlus = $FilePath & "\plink.exe" $Code1 = RunWait(@ComSpec & " /c " & $FilePathPlus & " -ssh -l root -pw ?????? 10.170.4.163 /usr/local/nagios/etc/led.pl > C:\AutoIT\LED\led.txt ", @SW_SHOW) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : @ComSpec & " /c " & $FilePathPlus & " -ssh -l root -pw ????? 10.170.4.163 /usr/local/nagios/etc/led.pl > C:\AutoIT\LED\led.txt " = ' & @ComSpec & " /c " & $FilePathPlus & " -ssh -l root -pw ?????? 10.170.4.163 /usr/local/nagios/etc/led.pl > C:\AutoIT\LED\led.txt " & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console The ConsoleWrite output when cut-n-pasted into a DOS box produces the expected file so I know it works. I've also tried many variations of the function moving, adding, and changing the " and ' (quote) marks. Also tried it without the @ComSpec macro and other related functions...e.g.  ShellExecuteWait , etc.
      The PC is a Windows 10 64bit and AutoIT is version 3.3.14.2.
      Searching here and Google has not yielded any clues that helped. 
    • xEviiLx
      By xEviiLx
      I'm trying to read value of a base pointer + offset.
      With only address I can easily the value but with base addres (pointer) I really don't know how I can do that.
       
×