Jump to content

Strange progress behavior

Recommended Posts


Hi everyone :)

Hope you're doing great.

Well, I'm writing a script that allows our Service Desk to clean several temp folder as a first diagnostic. 
Indeed, the agent in charge of the issue will have to choose what to clean (web browsers temp folders, some windows one etc...)

I added a progress bar to see the current state of the script but if I select more than one checkbox, it seems that the counting is not done properly and is directly filled at 100% (when at leat 2 boxes are checked) and I don"t get the final message saying that all is done, especially for if the last box is checked.
But if I launch the process with only one checkbox checked,it's working...

I've enclosed the au3 files for you because posting them in this post would be... unreadable lol. So you can maybe do some tests as well.

I'm pretty sure the code can be optimized (a lot :) ) and that there is a much better way to achieve what I want the script to be.

Maybe can someone can give me a hand over here.

Thanks in advance.




~~~ Doom Shall Never Die, Only The Players ~~~

Share this post

Link to post
Share on other sites


Thanks a lot, this is working much better now. In the meantime, I tested the ProgressOn functionality but it was late and did not get a chance to finish it. 

Therefore, on your function script, the progress bar sometimes back up... I'm trying to figure that out, maybe the math is done wrong. And if you have an idea, I'll take it :)

Regarding, your extended example, I've already seen it in a other post and get some ideas from it.

EDIT: OK, found the issue :) All is nicely working now :) 
Thanks again for your precious help!

Edited by 31290

~~~ Doom Shall Never Die, Only The Players ~~~

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • DoofGore
      By DoofGore
      Hello All, My first post I know this is pretty noobish but I'm trying to find a way to make this gui working.. searched but as I'm new to autoit I don't understand much... 
      I want to make this gui on top if we press ON TOP button and off on top function when we press on top off.. Created gui with koda ... any help would be appreciated 
      #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= Global $Form1 = GUICreate("Form1", 353, 209, 192, 114) Global $ONTOPON = GUICtrlCreateButton("ON TOP ON", 32, 40, 137, 65) Global $exit = GUICtrlCreateButton("EXIT", 105, 118, 137, 65) GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif") Global $ONTOPOFF = GUICtrlCreateButton("ON TOP OFF", 184, 41, 137, 65) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $ONTOPON Case $ONTOPOFF Case $exit Exit EndSwitch WEnd  

    • Shedunn
      By Shedunn
      Case $RNCheck If GUICtrlRead( $RNCheck) =1 Then GUICtrlSetState( $RN1outs, 1) GUICtrlSetState( $RN2outs, 1) GUICtrlSetState( $RN3outs, 1) GUICtrlSetState( $RN4outs, 1) GUICtrlSetState( $RN5outs, 1);Set RNode Outputs 1-5 to 1(Checked) EndIf In my Gui I have groups of check boxes with a separate one that says "Check ALL" that checks all of them within its group.

      What I was wondering is if there is a way to make it so that if Any of the other checkboxes in the group are unchecked it unchecks the "Check ALL" box?

    • computergroove
      By computergroove
      I've made a form in Koda where I make a list of 3 user definable elements that I want to be able to replicate with a button press so a user can add data that can be used as part of the program. 
      #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form=D:\Carbonite Important\0 - Programing\Scite and Autoit\Koda\Forms\Mileage Estimator.kxf $Form1 = GUICreate("Save Project", 614, 1126, 298, 141) $Location = GUICtrlCreateInput("Location", 40, 112, 345, 21) $Distance = GUICtrlCreateInput("Distance", 400, 112, 89, 21) $AddLocation = GUICtrlCreateButton("AddLocation", 288, 80, 97, 25) $Label1 = GUICtrlCreateLabel("Location", 40, 88, 45, 17) $Label2 = GUICtrlCreateLabel("Distance", 400, 88, 46, 17) $HomeBase = GUICtrlCreateInput("HomeBase", 312, 32, 121, 21) $LeapYear = GUICtrlCreateCheckbox("LeapYear", 464, 32, 17, 17) $Label3 = GUICtrlCreateLabel("Leap Year?", 488, 32, 59, 17) $Variance = GUICtrlCreateInput("Variance", 504, 112, 81, 21) $Label4 = GUICtrlCreateLabel("Variance", 504, 88, 46, 17) $Label5 = GUICtrlCreateLabel("Home Base", 312, 8, 59, 17) $Button1 = GUICtrlCreateButton("Button1", 144, 56, 1, 57) $Save = GUICtrlCreateButton("Save Project", 40, 16, 121, 25) $Load = GUICtrlCreateButton("Load Project", 176, 16, 121, 25) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Form1 Case $AddLocation EndSwitch WEnd I want to press the "add location" button and have the fields {Location, Distance and variance} create a new blank record located under the existing 3 input boxes. Since the fields can number over 30 locations in some examples I am thinking about having these items in a scrolling window. What is the best way to do this and can auto it add a variable while running by pressing a button?
    • XaelloNegative
      By XaelloNegative
      I made a small blunder with my code. I created the GUI under 1920x1080 resolution however, my user is configured to ONLY 1080x720 and cannot go any further than that.
      What do you guys think is the best way to correct this one? Resolution mathematics is something that came to mind however I do not have access to his PC to check  from time to time if  my estimation is correct and the resolution on my PC doesn't go down to 1080x720.
      Please help.
    • davidacrozier
      By davidacrozier
      Hello all ~
      I am running an autoit script on Windows 10 inside VMware Workstation 12 Pro version 12.5.2.  Technically I am remoting into ESXi which has a Domain Controller (DC), WebServer, FilServer, Windows 10, etc.  Using the GUI (i.e. running explorer.exe) I am able to open several different folders successfully.  The desktop, documents, USB external all open without issue.  The network share opening gives me issues.  Whenever I attempt to open \\filserver\users\user\sharedfolder I get the documents folder instead.  I understand that the documents folder is the default for explorer.  I have also attempted to use the letter drive mapped to the network share (Z:) and receive the same result.  When I run this script on Windows 10 alone without  the VM or the ESXi I am able to open the network share without problems.  I have tried to use the net use command to designate a letter M: to the network share folder prior to running the script.  This did not work for me.  
      One additional avenue I think might work is to use the systreeview321 and _GUICtrlTreeView_FindItem to step through the tree looking for the network share.  Once found,  double click on it and see if that opens the shared network folder.  I can click inside the VM with my mouse on the network share and it opens just fine.  Not sure if running up against GUI issues, or permission issues, or what?
      Thanks in advance,
      Davida Crozier
      This script is a subset of a much larger program, but it illustrates what I am dealing with.


Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.