handofthrawn

How to center and size GUICtrlCreateListView

6 posts in this topic

I am trying to adjust my top column so the column topics are centered and using a bigger font.  However, whenever I use a bigger font the columns stay the same size and I just get a ",,,"

Does anyone know how to stretch the columns to use the entire box, center it, and increase the font size?  Thanks for any help.

#include <Misc.au3>
#include <Excel.au3>
#include <GUIConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

GUICreate("Indications", 410, 280, 590, 85, -1, $WS_EX_ACCEPTFILES) ; Size of box
    GUISetBkColor(0x00E0FFFF) ; will change background color
    Local $idListview = GUICtrlCreateListView("   Column    |    Item   |   PCI   |   IDE   ", 5, 5, 395, 210) ;,$LVS_SORTDESCENDING)
    GUICtrlSetFont($idListview, 12)
    ;GUICtrlSetFont($idListview, 18)  ; Font size I would like to use
    Local $idButton = GUICtrlCreateButton("Close", 150, 220, 90, 55) ; CLOSE BUTTON
    Local $idItem1 = GUICtrlCreateListViewItem("item211|col22|col23|col34", $idListview)
    Local $idItem2 = GUICtrlCreateListViewItem("test111|test31|test5|test6", $idListview)
    GUICtrlSetState(-1, $GUI_DROPACCEPTED) ; to allow drag and dropping
    GUISetState(@SW_SHOW)
    ;GUICtrlDelete($idItem1)

    ; Loop until the user exits.
    While 1
        Switch GUIGetMsg()

            Case $GUI_EVENT_CLOSE
                ExitLoop

            Case $idButton
                ExitLoop

            Case $idListview


        EndSwitch
    WEnd

 

Share this post


Link to post
Share on other sites



_GUICtrlListView_SetColumnWidth($idListview, 0, $LVSCW_AUTOSIZE_USEHEADER)

Will automatically stretch the column width to the column header. Be sure to

#include <GUIListView.au3>

 

Share this post


Link to post
Share on other sites

Thanks for the help!  Sadly I still have one problem.  That line only stretched the first column, "Column" but did not do the rest for "Item", ""PCI", and "IDE".

I tried reading through the _GUICtrlListView_SetColumnWidth parameters and example but couldn't figure out where I was going wrong.

Share this post


Link to post
Share on other sites

I did figure out I can do each one manually though but I can't use the autosize feature then.

Share this post


Link to post
Share on other sites

Thanks so much InunoTaishou!  I feel so stupid now because my manual fix was to set each one not thinking I could use the autosize on each one too.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • PINTO1927
      By PINTO1927
      Hello guys,
      I'm working with a simple script, complementing a GUICtrlCreateListView which has 5 columns. I would order the first column so that the numbers are decreasing.
      #include <GuiListView.au3> #include <ListViewConstants.au3> #include <WindowsConstants.au3> #include <GuiConstantsEx.au3> #include <StructureConstants.au3> Opt('MustDeclareVars', 1) Global $search_LV, $B_DESCENDING GUICreate("ListView Sort by Column Click", 400, 300) $search_LV = GUICtrlCreateListView("String|Number|String", 2, 2, 394, 268) GUICtrlSendMsg($search_LV, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES) GUICtrlSendMsg($search_LV, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT) GUICtrlCreateListViewItem("line4|5|1A", $search_LV) GUICtrlCreateListViewItem("line5|4.50 |1B", $search_LV) GUICtrlCreateListViewItem("line10|4.0 |2C", $search_LV) GUICtrlCreateListViewItem("line3|23|01", $search_LV) GUICtrlCreateListViewItem("line2|0.34560 |09", $search_LV) GUICtrlCreateListViewItem("line1|1.0 |7A", $search_LV) GUICtrlCreateListViewItem("line1|0.1 |8C", $search_LV) GUICtrlCreateListViewItem("line1|97|5B", $search_LV) GUICtrlCreateListViewItem("line1|910|9B", $search_LV) GUICtrlCreateListViewItem("line1|99|11", $search_LV) GUICtrlCreateListViewItem("line1|990.99|06", $search_LV) _GUICtrlListView_SetColumnWidth($search_LV, 0, 75) _GUICtrlListView_SetColumnWidth($search_LV, 1, 75) _GUICtrlListView_SetColumnWidth($search_LV, 2, 75) GUISetState() GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") ;~ _GUICtrlListView_RegisterSortCallBack($search_LV, False) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $search_LV ; Kick off the sort callback ;~ _GUICtrlListView_SortItems($search_LV, GUICtrlGetState($search_LV)) ;~ _GUICtrlListView_UnRegisterSortCallBack($search_LV) EndSwitch WEnd Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam) #forceref $hWnd, $iMsg, $iwParam Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $tInfo $hWndListView = $search_LV ;~ If Not IsHWnd($search_LV) Then $hWndListView = GUICtrlGetHandle($search_LV) $tNMHDR = DllStructCreate($tagNMHDR, $ilParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iIDFrom = DllStructGetData($tNMHDR, "IDFrom") $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom ;~ Case $search_LV Case GUICtrlGetHandle($search_LV) Switch $iCode Case $LVN_COLUMNCLICK ; A column was clicked ConsoleWrite("Header geklickt" & @CRLF) Local $tInfo = DllStructCreate($tagNMLISTVIEW, $iLparam) _GUICtrlListView_UnRegisterSortCallBack($search_LV) Local $ColumnSorted = DllStructGetData($tInfo, 'SubItem') If $ColumnSorted = 1 Then ConsoleWrite('Numeric: ' & _GUICtrlListView_RegisterSortCallBack($search_LV, True) & @CRLF) Else ConsoleWrite('Literal: ' & _GUICtrlListView_RegisterSortCallBack($search_LV, False) & @CRLF) EndIf _GUICtrlListView_SortItems($search_LV, DllStructGetData($tInfo, 'SubItem')) EndSwitch EndSwitch EndFunc ;==>WM_NOTIFY Ordering the "String" column, you notice that the line "line10" is not ordered last. And 'possible to order the "String" column in descending order?
      thank you very much
    • david1337
      By david1337
      Hey guys
      Quick question:
      In this GUI the listview is created from items in test.txt
      I would like my "Get Info" button to show the actual text of the item that is selected. So far I have been able to make it show the number of the item.
      What is the last missing puzzle here?
       
      #include <GUIConstantsEx.au3> #include <GUIListViewEx.au3> Global $MainGUI_ManageItemList Global $File = "test.txt" Global $FileToArray = FileReadToArray("test.txt") Call ("MainGUI_ManageItemList") Func MainGUI_ManageItemList() Local $Button1 $MainGUI_ManageItemList = GUICreate("Manage Item List", 800, 400, -1, -1) $cLV = GUICtrlCreateListView("[items]", 10, 10, 400, 775, $LVS_NOCOLUMNHEADER) GUICtrlSetFont(-1, 12, 800, 0, "@Arial Unicode MS") _GUICtrlListView_SetColumnWidth($cLV, 0, 378) $Button1 = GUICtrlCreateButton("Button 1", 425, 10, 80, 30) $RemoveItem = GUICtrlCreateButton("Remove Item", 425, 50, 80, 30) $GetInfo = GUICtrlCreateButton("GetInfo", 425, 120, 80, 30) GUISetState(@SW_SHOW, $MainGUI_ManageItemList) ; Intialise ListView Global $iLV_Index = _GUIListViewEx_Init($cLV) ; Insert lines _GUIListViewEx_Insert($FileToArray, True) ; Register required messages _GUIListViewEx_MsgRegister(True, False, False, False) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Button1 MsgBox(0,"","Button 1 is pressed") Case $RemoveItem _GUIListViewEx_Delete() Case $GetInfo $iIndex = _GUICtrlListView_GetSelectedIndices($cLV) msgbox (0, "Selected item", $iIndex) EndSwitch WEnd EndFunc ;==>Main  
    • PINTO1927
      By PINTO1927
      Hi Guys,
      I'm working on this project:
      $Import = GUICtrlCreateButton("Import", 15, 175, 90, 40, $WS_GROUP) $List = GUICtrlCreateListView("Name|Address|E-mail", 15, 220, 400, 363, $LVS_SORTDESCENDING) $Item1 = GUICtrlCreateListViewItem("test|test|test", $List) GUISetState(@SW_SHOW, $GUI) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $Exit Exit Case $Import $Table_Import = FileOpenDialog("Import list '*.txt'", @DesktopDir & "\", "Text (*.txt)") If @error Then ContinueLoop GUICtrlSetData($Item1, $Table_Import) In the text file the fields are delimited with "|" and the values are not in the same row but one below the other.
      However in the txt file the sum of the values may change.
      Can you help me?
      Thank's
    • PINTO1927
      By PINTO1927
      Hello guys,
      I built a gui where a GUICtrlCreateListView with two columns is present.
      Through an "Import" button I would be able to import the contents of an .xls or .txt.
      Can you help me?
      Thank's
    • AutoBert
      By AutoBert
      I have a LV with different coloured Cols:
      ;https://autoit.de/index.php/Thread/84279-Unterschiedliche-Textfarben-innerhalb-einer-ListView/?postID=674195#post674195 #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <array.au3> #include <ListViewConstants.au3> #include <StructureConstants.au3> #include <WindowsConstants.au3> $aColBK = IniReadSection(@ScriptDir & "\lv_format.ini", "ColBKColor") _ArrayDelete($aColBK, 0) ;_ArrayDisplay($aColBK) $aRowBK = IniReadSection(@ScriptDir & "\lv_format.ini", "RowBKColor") _ArrayDelete($aRowBK, 0) ;_ArrayDisplay($aColBK) $aColText = IniReadSection(@ScriptDir & "\lv_format.ini", "ColTextColor") _ArrayDelete($aColText, 0) ;_ArrayDisplay($aColBK) $aRowText = IniReadSection(@ScriptDir & "\lv_format.ini", "RowTextColor") _ArrayDelete($aRowText, 0) ;_ArrayDisplay($aRowText) $GUI = GUICreate("Listview Farbig", 1024, 300, 0, 0) ;<==== Breite geändert $cListView = GUICtrlCreateListView("", 2, 2, 1020, 294, -1, BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT)) ;<==== Breite geändert $hListView = GUICtrlGetHandle($cListView) For $i = 1 To 31 _GUICtrlListView_InsertColumn($hListView, $i - 1, $i, 25) _GUICtrlListView_SetColumnWidth($hListView, $i - 1, 32) ;<==== eingefügt für Spaltenbreite Next For $i = 0 To 21 ; alle Item/SubItem erstellen _GUICtrlListView_AddItem($hListView, "Item: " &$i, $i) For $j = 1 To 30 _GUICtrlListView_AddSubItem($hListView, $i, "Sub: "&$j, $j) Next Next GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") GUISetState() While True $msg = GUIGetMsg() Switch $msg Case -3 ExitLoop EndSwitch WEnd Func WM_NOTIFY($hWnd, $msg, $wParam, $lParam) Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iIDFrom = DllStructGetData($tNMHDR, "IDFrom") $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hListView Switch $iCode Case $NM_CUSTOMDRAW Local $tCustDraw = DllStructCreate($tagNMLVCUSTOMDRAW, $lParam) Local $iDrawStage, $iItem, $iSubitem, $hDC, $tRect $iDrawStage = DllStructGetData($tCustDraw, 'dwDrawStage') Switch $iDrawStage Case $CDDS_ITEMPREPAINT Return $CDRF_NOTIFYSUBITEMDRAW Case BitOR($CDDS_ITEMPREPAINT, $CDDS_SUBITEM) ; Item/SubItem das aktuell gezeichnet werden soll ermitteln $iItem = DllStructGetData($tCustDraw, 'dwItemSpec') $iSubitem = DllStructGetData($tCustDraw, 'iSubItem') Switch $iItem ; Zeilenwahl Case -1 ;kommt nicht vor ist aber notwendig, damit case else verwendet werden kann Case Else $iIndex = _ArraySearch($aRowBK, $iItem, 0, 0, 0, 0, 1, 0) If $iIndex = -1 Then ;nicht im Array für spezielle Zeilen also weiß DllStructSetData($tCustDraw, 'clrTextBk', RGB2BGR(0xFFFFFF)) Else DllStructSetData($tCustDraw, 'clrTextBk', RGB2BGR($aRowBK[$iIndex][1])) ;ConsoleWrite('Item '&$iItem&' BK: '&$aRowBK[$iIndex][1] & @CRLF) EndIf $iIndex = _ArraySearch($aRowText, $iItem, 0, 0, 0, 0, 1, 0) If $iIndex = -1 Then ;nicht im Array für spezielle Zeilen also schwarz DllStructSetData($tCustDraw, 'clrText', RGB2BGR(0x000000)) Else DllStructSetData($tCustDraw, 'clrText', RGB2BGR($aRowText[$iIndex][1])) ;ConsoleWrite('Item '&$iItem&' Text: '&$aRowText[$iIndex][1] & @CRLF) EndIf EndSwitch Switch $iSubitem Case -1 ;kommt nicht vor ist aber notwendig, damit case else verwendet werden kann Case Else $iIndex = _ArraySearch($aColBK, $iSubitem, 0, 0, 0, 0, 1, 0) If $iIndex <> -1 Then DllStructSetData($tCustDraw, 'clrTextBk', RGB2BGR($aColBK[$iIndex][1])) ;ConsoleWrite('SubItem '&$iSubitem&' BK: '&$aColBK[$iIndex][1] & @CRLF) EndIf $iIndex = _ArraySearch($aColText, $iSubitem, 0, 0, 0, 0, 1, 0) If $iIndex <> -1 Then DllStructSetData($tCustDraw, 'clrText', RGB2BGR($aColText[$iIndex][1])) ;ConsoleWrite('SubItem '&$iSubitem&' Text: '&$aColText[$iIndex][1] & @CRLF) EndIf EndSwitch Return $CDRF_NEWFONT EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Func RGB2BGR($iColor) Local $sH = Hex($iColor, 6) Return '0x' & StringRight($sH, 2) & StringMid($sH, 3, 2) & StringLeft($sH, 2) EndFunc ;==>RGB2BGR i use lv_format.ini for defining the cols Background- and Textcolour. Now i want to colour the cols in the LV-Header also, but i can't figure it out.