fishbones

Help me with mouse clicks

2 posts in this topic

Hi guys!

I'm really new to AutoIT, and I have little experience with scripting or any sort of programming. But I'm trying to learn!
Right now, what I'm trying to do is make a quick script that repeats a few functions while a key is held down. I want to see if I can make a quick-burst script that might work in Fallout 4 with machine guns
 

#include <Misc.au3>

$dll = DllOpen("user32.dll")

While 1
    Sleep(100)
    If _IsPressed("01", $dll) Then
        MouseDown("left")
        Sleep(320)
        MouseUp("left")
        Sleep(25)
    EndIf
WEnd
DllClose($dll)

Right now, when I hold down my left mouse button, it just repeats the script once - then I have to release and hold again to enable it again. Is it possible to to start it from the top and basically just repeats itself while I'm holding down my mouse button?

In advance, thank you!

Share this post


Link to post
Share on other sites

@fishbones you seem to have missed the forum rules on your way in. Please read them now, especially the part about game automation, and you will see why you won't receive any help with these subjects.


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • Robdog1955
      By Robdog1955
      I'm trying to click a button on a web page. I have added a couple of MsgBox lines to allow me to watch what happens on the page. As you can see the first half of my script enters data into text boxes on the page. I have no problem there. I just cannot click on the region buttons. The "set focus" line causes an outline to appear around the EU button and the "click button" line causes the "Pick a Region" text to disappear. Here is the code I have so far.
      #include <IE.au3> Local $oIE = _IECreate("http://questchecker.com/") Local $iQuestID = "123456" Local $sCharacterName = "CharacterName" Local $colForms = _IEFormGetCollection($oIE) $iCount = 0 For $oForm In $colForms $oFormElements = _IEFormElementGetCollection($oForm) For $oFormElement In $oFormElements $iCount = $iCount + 1 Local $sTagName = StringLower($oFormElement.tagName) Local $sElementType = $oFormElement.type Local $sElementName = $oFormElement.name Switch $iCount Case 6 _IEFormElementSetValue($oFormElement, "MyRealm", 0) ; realm Case 7 _IEFormElementSetValue($oFormElement, $sCharacterName, 0) Case 8 _IEFormElementSetValue($oFormElement, $iQuestID, 0) EndSwitch Next Next Local $oButtons = _IEGetObjByName($oIE, "questForm") For $oButton In $oButtons If _IEFormElementGetValue($oButton) = "US" Then MsgBox(0, "", "Click Okay to set focus") _IEAction($oButton, "focus") MsgBox(0, "", "Click Okay to click button") _IEAction($oButton, "click") ExitLoop EndIf Next MsgBox(0, "", "Click Okay to quit") _IEQuit($oIE) Exit  
    • dadalt95
      By dadalt95
      Perform a simple google search!
      The script below works fine until fill the google form!
      What I can't find is how to submit the form, tried a couple of ways and none of them worked.

       
      #include <IE.au3> $oIE = _IECreate ("www.google.com") $o_form = _IEFormGetObjByName ($oIE, "f") $o_login = _IEFormElementGetObjByName ($o_form, "q") $username = "80251369" _IEFormElementSetValue ($o_login, $username) $o_numer = _IEGetObjByName($o_form, "btnK") _IEAction ($o_numer, "click")  
      The code runs without any problem.
      I don't know how to proceed!
      Thanks in advance!
    • KING_NK
      By KING_NK
      #RequireAdmin
      Global $x=0
      Global $y=0
      Func Start()
      While 1
      AutoItSetOption('MouseCoordMode',0)
      AutoItSetOption('SendKeyDelay',10)
      WinActivate('XXX')
      MouseClick('Primary',852,62,1,10)
      sleep(2200)
      MouseClick('Primary',880,196,1,10)
      Send('260',0)      -----------------------> $a as 260
      MouseClick('Primary',880,196,1,0)
      sleep(2200)
      MouseClick('Primary',1019,194,1,10)
      Sleep(2200)
      Send('98',0) ------------------------->$b as 98
      sleep(1000)
      Wend
      EndFunc
       
       
      I want to use Different number in every loop in the place of $a and  $b.
      Is it possble?If it possible Kindly help me
    • amphoric
      By amphoric
      Hi,
      I am struggling converting my 1D array to a 2D array and then showing that in my List View. Below is my current code, where I would like to take the array from the input box, and have that displayed as a list within the list view this is a list of computer names, and then update the 2nd column of each line once I have ran a ping and a registry change on each computer name, with either 'Completed' and 'Failed'
      I have checked out the AutoIt Arrays page here: https://www.autoitscript.com/wiki/Arrays , but unfortunately I cannot get my head around it. Any help would be greatly appreciated.
      I hope this makes sense.
      Thanks
       
      #include <Date.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <MsgBoxConstants.au3> #include <GUIListBox.au3> #include <GuiListView.au3> #Region ### $Form1 = GUICreate("Title", 515, 533, -1, -1) GUISetBkColor(0xFFFFFF) $Pic2 = GUICtrlCreatePic("Images\pic.jpg", 16, 16, 212, 28) $Label1 = GUICtrlCreateLabel("Label", 240, 16, 271, 33, $SS_CENTER) GUICtrlSetFont(-1, 17, 800, 0, "") $Combo1 = GUICtrlCreateCombo("", 256, 406, 241, 25, BitOR($GUI_SS_DEFAULT_COMBO,$CBS_SIMPLE)) $Label2 = GUICtrlCreateLabel("Please select the location", 45, 401, 210, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $ChangeButton = GUICtrlCreateButton("Change", 286, 487, 75, 25) $RePromptButton = GUICtrlCreateButton("Re-prompt User", 366, 487, 139, 25) $Checkbox1 = GUICtrlCreateCheckbox("I have ensured that my selection is correct.", 10, 487, 273, 25) GUICtrlSetFont(-1, 10, 400, 0, "") $ManLocation = GUICtrlCreateLabel("Please enter the location:", 59, 448, 189, 20, $SS_RIGHT) GUICtrlSetFont(-1, 10, 800, 0, "") GUICtrlSetState(-1, $GUI_HIDE) $ManLocInput = GUICtrlCreateInput("", 256, 445, 241, 24) GUICtrlSetState(-1, $GUI_HIDE) $Label5 = GUICtrlCreateLabel("for this device:", 138, 418, 109, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Label3 = GUICtrlCreateLabel("Asset Number:", 98, 72, 107, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Input1 = GUICtrlCreateInput("", 215, 69, 241, 24) $AddMulti = GUICtrlCreateLabel("Add Multiple Assets", 356, 55, 98, 13, $SS_RIGHT) GUICtrlSetFont(-1, 8, 400, 6, "") GUICtrlSetColor(-1, 0x808080) GUICtrlSetCursor (-1, 0) $List1 = GUICtrlCreateListView("", 16, 104, 481, 278) $Add = GUICtrlCreateButton("Add", 461, 68, 35, 25) GUISetState(@SW_SHOW) #EndRegion ### ;### StartForm ### $FormaMultiple = GUICreate("Title", 277, 418, -1, -1) GUISetBkColor(0xFFFFFF) $Label1 = GUICtrlCreateLabel("Please add 1 asset number per line.", 8, 11, 253, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $OK = GUICtrlCreateButton("OK", 56, 375, 75, 25) $Edit1 = GUICtrlCreateEdit("", 20, 40, 233, 329) $Cancel = GUICtrlCreateButton("Cancel", 136, 375, 75, 25) GUISetState(@SW_HIDE) ;### EndForm ### ;### Add List View Columns START ### ;### Add List View Columns END ### ;### Read Locations START ### ;Read the LOCAL ini file SECTIONS Global $aSections = IniReadSectionNames("Locations.ini") ;If the above succeeded, convert the array to a string with each item separated by a | (pipe) and set the default selected item to $aSections[1] If(Not @Error) Then GUICtrlSetData($Combo1, _ArraytoString($aSections, "|", 1), $aSections[1]) ;### Read Locations END ### ;### Require Admin START ### ;#RequireAdmin ;### Require Admin END ### While 1 $nMsg = GUIGetMsg() ;### Data Validation START ### ;Set Checkbox = ENABLE/DISABLE if not GUICtrlRead($Combo1) = "" AND GUICtrlRead($Combo1) = "Not In List" then if not GUICtrlRead($ManLocInput) = "" Then If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) Else If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) EndIf Else if GUICtrlRead($Combo1) = "" Then If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) Else If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) EndIf EndIf ;Set Button = ENABLE/DISABLE If GUICtrlRead($Checkbox1) = 1 Then If Not ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_ENABLE) Else If ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_DISABLE) EndIf ;### Data Validation END ### Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $Add Case $AddMulti GUISetState(@SW_SHOW, $FormaMultiple) Case $Cancel GUISetState(@SW_HIDE, $FormaMultiple) Case $OK $sText = GUICtrlRead($Edit1) $aText = StringSplit($sText, @CRLF, 1) $bText = _ArrayToString($aText, ";", 1, -1) $cText = StringStripWS($bText, $STR_STRIPALL ) $dText = StringReplace($cText,";;",";") GUICtrlSetData($Input1, $dText) GUICtrlSetData($Edit1, "") GUISetState(@SW_HIDE, $FormaMultiple) For $i = 1 To $aText[0] Next Case $Combo1 ; If the combo is actioned Switch GUICtrlRead($Combo1) Case "Not In List" ; Show the manual input controls GUICtrlSetState($ManLocation, $GUI_SHOW) GUICtrlSetState($ManLocInput, $GUI_SHOW) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") Case Else ; Hide them GUICtrlSetState($ManLocation, $GUI_HIDE) GUICtrlSetState($ManLocInput, $GUI_HIDE) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") EndSwitch Case $ChangeButton ChangeReg() Case $RePromptButton RemoveReg() EndSwitch WEnd Func ChangeReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & " Changed to: " & GUICtrlRead($Combo1)) Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg Func RemoveReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & "CLEARED") Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg1  
    • islandspapand
      By islandspapand
      Hi all
      i am currently trying to click on an element in a HTML Table, but just can get it to work.
      i am able to click the top of the table so it changes to sort  but just can't click on the element in the table.
      an i need to click on element to continue in the site.
      i have attached the code so far and pictures of the table  element want to click plus the source of the table.
      i am able to get data in the table with $oTable = _IETableGetCollection($oIE, 2) but not able to click on them.
       
      Help is very much appreciated
       
      #cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.14.2 Author: myName Script Function: Template AutoIt script. #ce ---------------------------------------------------------------------------- ; Script Start - Add your code below here #include <IE.au3> #include "DOM.au3" #include <Array.au3> #include <MsgBoxConstants.au3> Global $oIE = _IECreate("*") _IELoadWait($oIE) Sleep(2000) _PageLogin($oIE) _PageLoadWait() _PageNewReq($oIE) _PageLoadWait() _InputModelInf($oIE) _PageLoadWait() Sleep(1000) $aTableLink = BGe_IEGetDOMObjByXPathWithAttributes($oIE, "//table/tbody/tr/td[.='Name Of user']", 2000) ;~ $aTableLink = BGe_IEGetDOMObjByXPathWithAttributes($oIE, "//table/tbody/tr", 2000) ;~ _ArrayDisplay($aTableLink,"$aTableLink") If IsArray($aTableLink) Then ConsoleWrite("Able to BGe_IEGetDOMObjByXPathWithAttributes($oIE, //table/tbody/tr/td[.='Name Of user'])" & @CRLF) For $i = 0 To UBound($aTableLink)-1 ConsoleWrite(" OuterHTML : " & $aTableLink[$i].outerHTML & @CRLF) ConsoleWrite(" Parentnode : " & $aTableLink[$i].parentnode & @CRLF) ConsoleWrite(" Parentnode.click : " & $aTableLink[$i].parentnode.fireEvent("onclick","click") & @CRLF) $objClick = $aTableLink[$i].parentnode ;~ _IEAction($aTableLink[$i] , "focus") _IEAction($objClick , "focus") ;~ If _IEAction($aTableLink[$i], "click") Then If _IEAction($objClick, "click") Then ConsoleWrite("Able to _IEAction($aForumLink[0], 'click')" & @CRLF) _IELoadWait($oIE) Else ConsoleWrite("UNable to _IEAction($aForumLink[0], 'click')" & @CRLF) Exit 3 EndIf Next Else ConsoleWrite("Unable to BGe_IEGetDOMObjByXPathWithAttributes($oIE, //table/tbody/tr/td[.='Name Of user'])" & @CRLF) Exit 2 EndIf _PageLoadWait() Func _InputModelInf($oTmpIE) ; Add Var for Model & Serial in Func $oModelInput = _IEGetObjById($oTmpIE,"model") _IEAction($oModelInput,"focus") _IEDocInsertText($oModelInput, "*") $oSerialInput = _IEGetObjById($oTmpIE,"serial") _IEAction($oModelInput,"focus") _IEDocInsertText($oSerialInput, "*") $links = $oTmpIE.document.getElementsByClassName("btn btn-primary ng-scope") For $link In $links If $link.innertext = "Søg" Or $link.innertext = "Search" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageNewReq($oTmpIE) $links = $oTmpIE.document.getElementsByClassName("ng-scope k-link") For $link In $links If $link.innertext = "Send ny fejlmelding" Or $link.innertext = "Submit a New Service Request" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageLogin($oTmpIE) $oUserInput = _IEGetObjById($oTmpIE,"loginid") _IEDocInsertText($oUserInput, "*") $oPasswordInput = _IEGetObjById($oTmpIE,"password") _IEDocInsertText($oPasswordInput, "*") $links = $oTmpIE.document.getElementsByClassName("btn btn-primary login ng-scope") For $link In $links If $link.innertext = "Sign in" Then $link.click() ExitLoop EndIf Next Return True EndFunc Func _PageLoadWait() Local $PageLoadWait = False ;~ nav navbar-nav navbar-right ng-hide ;~ nav navbar-nav navbar-right $tags = $oIE.document.GetElementsByTagName("ul") For $tag in $tags $class_value = $tag.GetAttribute("class") If $class_value = "nav navbar-nav navbar-right" Then ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : Webpage loading :) ' & @CRLF) ;### Debug Console $PageLoadWait = True ExitLoop EndIf Next Do sleep(250) For $tag in $tags $class_value = $tag.GetAttribute("class") If $class_value = "nav navbar-nav navbar-right ng-hide" Then ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : Webpage load finished :)'& @CRLF) ;### Debug Console $PageLoadWait = False ExitLoop EndIf Next Until $PageLoadWait = False EndFunc  
      Thanks in advance