Jump to content
Sign in to follow this  
Queener

Click on Toolbar icon

Recommended Posts

This is the info of the interface:

Window
Title:    Password Safe
Class:    #32770

Control
Class:    ToolbarWindow32
Instance:    2
ClassnameNN:    ToolbarWindow322
Name:    
Advanced (Class):    [CLASS:ToolbarWindow32; INSTANCE:2]

 ToolsBar
1:    32003    Make New Database
2:    32002    Open Another Database
3:    32004    Close Database
4:    32005    Save Database
5:    0    
6:    32066    Copy Password to Clipboard
7:    32068    Copy Username to Clipboard
8:    32069    Copy Notes to Clipboard
9:    32065    Clear the clipboard contents
10:    0    

 

I wanted to click on 1:    32003    Make New Database. But unfortunately, I'm unable to click on that. Any help is much appreciated. Below are the code I tried:

$Title = "Password Safe"
$Class = "[CLASS:ToolbarWindow32; INSTANCE:2]"
    WinWaitActive($Title)
Sleep(500)
    Dim $hWnd = WinGetHandle($Title,"")
Dim $hToolBar = ControlGetHandle($hWnd, '', $Class)
    ConsoleWrite($hWnd & @TAB & $hToolBar & @LF)
_GUICtrlToolbar_ClickIndex($hToolBar, 32003)


Msgbox(0, "Hate", "Just hate it when I post a question and find my own answer after a couple tries. But if I don't post the question, I can't seem to resolve it at all.")

Share this post


Link to post
Share on other sites
Local $sTitle = "Password Safe"
Local $sClass = "[CLASS:ToolbarWindow32; INSTANCE:2]"
WinWaitActive($sTitle)

Local $hWnd = WinGetHandle($sTitle, "")
Local $hToolBar = ControlGetHandle($hWnd, "", $sClass)
ConsoleWrite($hWnd & @TAB & $hToolBar & @LF)
ControlCommand($hWnd, "", $hToolBar, "SendCommandID", 32003)
; "SendCommandID", Command ID
; Simulates the WM_COMMAND message. Usually used for ToolbarWindow32 controls - use the ToolBar tab of Au3Info to get the Command ID.

 


Nothing is so strong as gentleness. Nothing is so gentle as real strength

 

Share this post


Link to post
Share on other sites

I really appreciate the help, but I tested multiple times with no success. Nothing happen when I run the script.

 

EDIT: I'm not sure what's going on, but after I added:

 

#include <MsgBoxConstants.au3>

it's working now... scratching my head...

Edited by Queener

Msgbox(0, "Hate", "Just hate it when I post a question and find my own answer after a couple tries. But if I don't post the question, I can't seem to resolve it at all.")

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By nacerbaaziz
      good morning all.
      first lit me give you all a thinks to your help
      you're help me allot thank you all.
      sirs today i've a new problem
      it's not a problem but thing i want to add it to blind accessability.
      the ListBox can send a notification when the user send a double click on it items
      but as we know that the blind users can't use the mouse for that they use the keybord to navigate.
      as we know that the enter replace the double click on the keybord
      for that i need when the user send a inter above any listBox item the list send a double click notification.
      i know some of you tell me that i can use the  GUISetAccelerators function
      but the enter has a other tasks such as leav a blanc line on edits and activate the defaultButton and other tasks.
      that what i need and i hope that you can help me
      this is a simple example.
      #include <GUIConstantsEx.au3> #include <StructureConstants.au3> #include <MsgBoxConstants.au3> #include <WindowsConstants.au3> #include <ListBoxConstants.au3> Example() Func Example() Local $sMESSAGE = "The following buttons have been clicked" GUICreate("My GUI list") ; will create a dialog box that when displayed is centered Local $idButton_Add = GUICtrlCreateButton("Add", 64, 32, 75, 25) Local $idButton_Clear = GUICtrlCreateButton("Clear", 64, 72, 75, 25) global $idMylist = GUICtrlCreateList("buttons that have been clicked", 176, 32, 121, 97) GUICtrlSetLimit(-1, 200) ; to limit horizontal scrolling GUICtrlSetData(-1, $sMESSAGE) global $DummyList = GUICtrlCreateDummy() GUICtrlSendToDummy($DummyList, 1) Local $idButton_Close = GUICtrlCreateButton("my closing button", 64, 160, 175, 25) GUIRegisterMsg($WM_command, "WM_command") GUISetState(@SW_SHOW) ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $idButton_Add GUICtrlSetData($idMylist, "You clicked button No1|") Case $idButton_Clear GUICtrlSetData($idMylist, "") Case $idButton_Close MsgBox($MB_SYSTEMMODAL, "", "the closing button has been clicked", 2) Exit case $DummyList $g_iTemp = GUICtrlRead($DummyList) if $g_iTemp = $LBN_DBLCLK then ;$LBN_DBLCLK then msgBox(64, "", "") endIf GUICtrlSendToDummy($DummyList, 0) EndSwitch WEnd EndFunc ;==>Example Func WM_command($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg Local $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = $lParam $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case GUICtrlGetHandle($idMylist) Switch $iCode Case $LBN_SELCHANGE, $LBN_DBLCLK, $LBN_SELCANCEL, $LBN_SETFOCUS GUICtrlSendToDummy($DummyList, $iCode) case else ;GUICtrlSendToDummy($DummyTreeview, 1) EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc  
    • By _leo_
      Hey there!
      I am having a problem with clicking a button in IE. As you can see in the code, there would be a class name to click it, but since this button exists several times with exactly the same code, I can only use the "Noch nicht veröffentlicht" to separate it from the others. But this part is just pure text without any classification. 
      "<div class="checkmark" data-v-1e5b1f70=""><svg xmlns="http://www.w3.org/2000/svg" class="icon" viewBox="0 0 16 16" data-v-1e5b1f70=""><circle cx="8" cy="8" r="8" data-v-1e5b1f70="" /></svg></div>Noch nicht veröffentlicht"
      I was trying to click it with:
      #include <IE.au3> local $oNNVs = _IEFormGetCollection($oIE2) For $oNNV in $oNNVs If String($oNNV.innertext) = "Noch nicht veröffentlicht" Then _IEAction($oNNV, "click") EndIf Next and:
      $inputs = $oIE2.document.getElementsByTagName("div") For $input In $inputs If $input.innertext == "Noch nicht veröffentlicht" then $input.click() EndIf Next But nothing seems to work. Thanks for the help!
    • By XinYoung
      Greetings!
      I am in need of your guidance once again. I searched the forums for clicking in span, clicking by class, clicking without an ID or Name, etc., but I am unable to find a solution for my problem.
      I am trying to expand this tree in IE. There is an arrow ( > ) that i need to click, but I can't find a way to do it . Alternatively, I can double-click the text "Servers", but that seems to be even more troublesome. I will have to do this 2-3 more times as the tree expands.
      There appears to be an ID for the tree, simply called "tree", but that isn't working when I send a click to it.

      ;Open an IE session and navigate to pgAdmin. Global $oIE = _IECreate($pgAdmin) ;Maximize the IE window. WinSetState(_IEPropertyGet($oIE, "hwnd"), "", @SW_MAXIMIZE) Sleep(2000) ;Expand the tree $oTree = _IEGetObjById($oIE, "tree") _IEAction($oTree, "click") Any ideas?  
    • By XinYoung
      Quick question: How can I click this "Select All" button in IE? There's no ID, and the href is "#"  
      Am I looking at the wrong html code?
      Am I looking
      Thank you all in advance!
    • By lenclstr746
      <span class="fr66n"><button class="dCJp8 afkep coreSpriteHeartOpen _0mzm-"><span class="glyphsSpriteHeart__outline__24__grey_9 u-__7" aria-label="Beğen"></span></button></span>
      I want to click this button ?
×
×
  • Create New...