Jump to content
Sign in to follow this  
Followers 0
Ventura

Add timers of a function.

By Ventura, in AutoIt General Help and Support

Recommended Posts

Ventura    1

Ventura
Posted

I use a function to make the Timer tho show as Minutes:Seconds.Miliseonds but I have an issue. 

It doesn't add the timers and thus it shows 0 as the return. It works for the normal timer and also for TicksToTime but doesn't with this function. 

; Should show 0:xx.xxx as the return but shows 0

Func Timer(Const $Timer)
    Local $Ms = Int(Mod(TimerDiff($Timer), 1000))
    Local $Timer2 = TimerDiff($Timer) / 1000
    Local $Mins = Int($Timer2 / 60)
    Local $Secs = Floor(Mod($Timer2, 60))
    Return StringFormat("%01i:%02i.%03i", $Mins, $Secs, $Ms)
EndFunc   ;==>Timer

$iBegin = TimerInit()
Sleep(Random(500,2000))
$Int1 = Timer($iBegin)

$iBegin = TimerInit()
Sleep(Random(500,2000))
$Int2 = Timer($iBegin)

$IntT = $Int1 + $Int2

MsgBox(0, '', $IntT)

 

Share this post

Link to post
Share on other sites

InunoTaishou    184

InunoTaishou
Posted

It's not being returned as a numerical value but as a string 

%01i:%02i.%03i

n:nn.nnn

Adding two string together is always going to return 0. Are you trying to add the time together?

This should do it if that's what you're wanting to accomplish: 

Local $iBegin = TimerInit()
Sleep(2205)
Local $aTime1 = Timer($iBegin)

Local $iBegin = TimerInit()
Sleep(1150)
Local $aTime2 = Timer($iBegin)

Local $aTimeTotal = TimerAdd($aTime1, $aTime2)

MsgBox(0, '', StringFormat("%01i:%02i.%03i", $aTimeTotal[0], $aTimeTotal[1], $aTimeTotal[2]))

Func Timer(Const $Timer)
    Local $Ms = StringFormat("%03i", Int(Mod(TimerDiff($Timer), 1000)))
    Local $Timer2 = TimerDiff($Timer) / 1000
    Local $Mins = StringFormat("%01i", Int($Timer2 / 60))
    Local $Secs = StringFormat("%02i", Floor(Mod($Timer2, 60)))
    Local $aReturn[3] = [$Mins, $Secs, $Ms]
    Return $aReturn
EndFunc   ;==>Timer

Func TimerAdd(Const $aArr1, Const $aArr2)
    Local $aReturn[3] = [$aArr1[0] + $aArr2[0], $aArr1[1] + $aArr2[1], $aArr1[2] + $aArr2[2]]
    Local $iAddUp = 0

    If ($aReturn[2] >= 1000) Then
        $iAddUp = Int($aReturn[2] / 1000)
        $aReturn[1] += $iAddUp
        $aReturn[2] -= $iAddUp * 1000
    EndIf
    If ($aReturn[1] >= 60) Then
        $iAddUp = Int($aReturn[2] / 60)
        $aReturn[0] += $iAddUp
        $aReturn[1] -= $iAddUp * 60
    EndIf
    Return $aReturn
EndFunc

 

Share this post

Link to post
Share on other sites

Chimp    498

Chimp
Posted (edited)

Not clear if your goal is to add delays and then have a string formatted with the total of delays, or you are trying a way to add together the delays already expressed in the form of string.
even if at first glance it seems the same thing, those require two completly different approaches (as in post #2 for example)
in the first case instead you could semplify your script like this: 

; Should show 0:xx.xxx as the return

Func Timer($Timer)
    Local $Ms = Int(Mod($Timer, 1000))
    Local $Timer2 = $Timer / 1000
    Local $Mins = Int($Timer2 / 60)
    Local $Secs = Floor(Mod($Timer2, 60))
    Return StringFormat("%01i:%02i.%03i", $Mins, $Secs, $Ms)
EndFunc   ;==>Timer

$iBegin = TimerInit()
Sleep(Random(500,2000))
$Int1 = TimerDiff($iBegin) ; Timer($iBegin)

$iBegin = TimerInit()
Sleep( Random(500,2000))
$Int2 = TimerDiff($iBegin) ; Timer($iBegin)

$IntT = $Int1 + $Int2

MsgBox(0, '', Timer($IntT))

p.s.

you could also be interested to this

Edited by Chimp
removed Const

small minds discuss people average minds discuss events great minds discuss ideas.... and use AutoIt....

Share this post

Link to post
Share on other sites

Ventura    1

Ventura
Posted (edited)

This what I'm trying to do.. The function I use actually does what I want, I get three or two formatted timestamps for the time taken and I put it in my gui as list.. So all I want was a way to add those two or three times and show exactly how long it took as a whole.

For example (Mins : Secs . MS)

0:31.570 + 0:51.329 + 0:34.887 = 1:57.786

Adding those three will give me 1 min 57 secs and 786 ms.. just like this page does

Maybe I have taken wrong approach for the code in OP because after looking both posts above it doesn't show exactly time taken but InunoTaishou code is closer to what I want. 

 

Edited by Ventura

Share this post

Link to post
Share on other sites

Ventura    1

Ventura
Posted

Here is my full code.. 

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>
#include <GuiListView.au3>

$Form = GUICreate("Form1", 300, 340, 0, 0)
GUISetBkColor(0x494E48)

$Border = GUICtrlCreateGraphic(10, 10, 280, 280)
$Header = GUICtrlCreateGraphic(10, 10, 280, 25)
$Label = GUICtrlCreateLabel("SPLITS", 15, 15, 40, 15)
$splits = GUICtrlCreateButton("Add Item", 50, 300, 80, 30)
$getsplit = GUICtrlCreateButton("Show Item", 160, 300, 80, 30)
GUICtrlSetColor($Border, 0x696A65)
GUICtrlSetColor($Header, 0x696A65)
GUICtrlSetColor($Label, 0x00FF00)
GUICtrlSetState($Border, $GUI_DISABLE)
GUICtrlSetState($Header, $GUI_DISABLE)

$Listview = GUICtrlCreateListView("Column1|Column2|Column3|Column4", 15, 40, 270, 240, _
        BitOR($LVS_SHOWSELALWAYS, $LVS_NOCOLUMNHEADER), $WS_EX_TRANSPARENT)
GUICtrlSetColor($Listview, 0xEEEEEE)
_GUICtrlListView_SetExtendedListViewStyle($Listview, BitOR($LVS_EX_DOUBLEBUFFER, $LVS_EX_TRANSPARENTBKGND, $LVS_EX_FULLROWSELECT))
_GUICtrlListView_SetColumnWidth($Listview, 0, 67)
_GUICtrlListView_SetColumnWidth($Listview, 1, 67)
_GUICtrlListView_SetColumnWidth($Listview, 2, 67)
_GUICtrlListView_SetColumnWidth($Listview, 3, 69)

GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $splits
            Addtolist()
        Case $getsplit

    EndSwitch
WEnd

Func Timer(Const $Timer)
    Local $Ms = Int(Mod(TimerDiff($Timer), 1000))
    Local $Timer2 = TimerDiff($Timer) / 1000
    Local $Mins = Int($Timer2 / 60)
    Local $Secs = Floor(Mod($Timer2, 60))
    Return StringFormat("%01i:%02i:%03i", $Mins, $Secs, $Ms)
EndFunc   ;==>Timer


Func Addtolist()
    $i = 0
    $rw = 0
    Local $aItem1, $aItem2, $aItem3

    While 1
        $Time = TimerInit()
        Sleep(1000)
        ;; Some function to do here
        $splits1 = Timer($Time)
        _GUICtrlListView_AddItem($Listview, $splits1, $i)
        $Time = TimerInit()
        Sleep(1000)
        ;; Some function to do here
        $splits2 = Timer($Time)
        _GUICtrlListView_AddSubItem($Listview, $i, $splits2, 1, 1)
        $Time = TimerInit()
        Sleep(1000)
        ;; Some function to do here
        $splits3 = Timer($Time)
        _GUICtrlListView_AddSubItem($Listview, $i, $splits3, 2, 2)
        $i = $i + 1

        $aItem1 = _GUICtrlListView_GetItem($Listview, $rw)
        $aItem2 = _GUICtrlListView_GetItem($Listview, $rw, 1)
        $aItem3 = _GUICtrlListView_GetItem($Listview, $rw, 2)
        $aItemT = $aItem1[3] + $aItem2[3] + $aItem2[3]
        MsgBox(1, "1", "Total time:" & @TAB & $aItemT)
        $rw = $rw + 1
    WEnd
EndFunc   ;==>Addtolist

 

Share this post

Link to post
Share on other sites

Chimp    498

Chimp
Posted

a possible way using a function for adding two timers at a time 

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>
#include <GuiListView.au3>

$Form = GUICreate("Form1", 300, 340, 0, 0)
GUISetBkColor(0x494E48)

$Border = GUICtrlCreateGraphic(10, 10, 280, 280)
$Header = GUICtrlCreateGraphic(10, 10, 280, 25)
$Label = GUICtrlCreateLabel("SPLITS", 15, 15, 40, 15)
$splits = GUICtrlCreateButton("Add Item", 50, 300, 80, 30)
$getsplit = GUICtrlCreateButton("Show Item", 160, 300, 80, 30)
GUICtrlSetColor($Border, 0x696A65)
GUICtrlSetColor($Header, 0x696A65)
GUICtrlSetColor($Label, 0x00FF00)
GUICtrlSetState($Border, $GUI_DISABLE)
GUICtrlSetState($Header, $GUI_DISABLE)

$Listview = GUICtrlCreateListView("Column1|Column2|Column3|Column4", 15, 40, 270, 240, _
        BitOR($LVS_SHOWSELALWAYS, $LVS_NOCOLUMNHEADER), $WS_EX_TRANSPARENT)
GUICtrlSetColor($Listview, 0xEEEEEE)
_GUICtrlListView_SetExtendedListViewStyle($Listview, BitOR($LVS_EX_DOUBLEBUFFER, $LVS_EX_TRANSPARENTBKGND, $LVS_EX_FULLROWSELECT))
_GUICtrlListView_SetColumnWidth($Listview, 0, 67)
_GUICtrlListView_SetColumnWidth($Listview, 1, 67)
_GUICtrlListView_SetColumnWidth($Listview, 2, 67)
_GUICtrlListView_SetColumnWidth($Listview, 3, 69)

GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $splits
            Addtolist()
        Case $getsplit

    EndSwitch
WEnd

Func Timer(Const $Timer)
    Local $Ms = Int(Mod(TimerDiff($Timer), 1000))
    Local $Timer2 = TimerDiff($Timer) / 1000
    Local $Mins = Int($Timer2 / 60)
    Local $Secs = Floor(Mod($Timer2, 60))
    Return StringFormat("%01i:%02i:%03i", $Mins, $Secs, $Ms)
EndFunc   ;==>Timer

Func _SumTimers($sT1, $sT2)
    ; merge the 2 timers by sum and convert all in millisecond
    if $sT1 = "" Then $sT1 = '0:0.0'
    if $sT2 = "" Then $sT2 = '0:0.0'
    Local $iTotMs = 0 ; totalizer of milliseconds
    Local $aT1 = StringSplit($sT1, ":.")
    Local $aT2 = StringSplit($sT2, ":.")
    $iTotMs = ($aT1[1] + $aT2[1]) * 60000 ; add both mins to milliseconds
    $iTotMs += ($aT1[2] + $aT2[2]) * 1000 ; add both secs to milliseconds
    $iTotMs += $aT1[3] + $aT2[3] ; add both milliseconds
    ; returns the sum of timers in a formatted string
    Return StringFormat("%01i:%02i.%03i", Int(($iTotMs/1000) / 60), Floor(Mod(($iTotMs/1000), 60)) ,Int(Mod($iTotMs, 1000)))
EndFunc   ;==>_SumTimes


Func Addtolist()
    $i = 0
    $rw = 0
    Local $aItem1, $aItem2, $aItem3, $aItemT

    While 1
        $Time = TimerInit()
        Sleep(1000)
        ;; Some function to do here
        $splits1 = Timer($Time)
        _GUICtrlListView_AddItem($Listview, $splits1, $i)
        $Time = TimerInit()
        Sleep(1000)
        ;; Some function to do here
        $splits2 = Timer($Time)
        _GUICtrlListView_AddSubItem($Listview, $i, $splits2, 1, 1)
        $Time = TimerInit()
        Sleep(1000)
        ;; Some function to do here
        $splits3 = Timer($Time)
        _GUICtrlListView_AddSubItem($Listview, $i, $splits3, 2, 2)
        $i = $i + 1

        $aItem1 = _GUICtrlListView_GetItem($Listview, $rw)
        $aItemT = _SumTimers($aItemT, $aItem1[3])
        $aItem2 = _GUICtrlListView_GetItem($Listview, $rw, 1)
        $aItemT = _SumTimers($aItemT, $aItem2[3])
        $aItem3 = _GUICtrlListView_GetItem($Listview, $rw, 2)
        $aItemT = _SumTimers($aItemT, $aItem3[3])
        ; $aItemT = $aItem1[3] + $aItem2[3] + $aItem2[3]
        MsgBox(1, "1", "Total time:" & @TAB & $aItemT)
        $rw = $rw + 1
    WEnd
EndFunc   ;==>Addtolist

 

small minds discuss people average minds discuss events great minds discuss ideas.... and use AutoIt....

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing AutoIt General Help and Support
×