Sign in to follow this  
Followers 0

CMD output indent GUICtrlCreateEdit

4 posts in this topic

I hope someone explain me how to do that... well, if you run the command netstat -a inside cmd prompt he look nice( indented ) but if you try to show the output inside the GUICtrlCreateEdit he look without indentation... how can I  fix it? Thx

$Pid = Run(@ComSpec & " /c " & "netstat -a",@ScriptDir,@SW_HIDE,$STDERR_CHILD + $STDOUT_CHILD)
                Dim $_StderrRead='', $_StdoutRead='', $_StdReadAll=''

                While ProcessExists ( $Pid )
                    $_StderrRead = StderrRead ( $Pid )
                    If Not @error And $_StderrRead <> '' Then
                        GUICtrlSetData($Edit1, "Error: " & $_StderrRead & @Crlf ,1)
                    $_StdoutRead = StdoutRead ( $Pid )
                    If Not @error And $_StdoutRead <> '' Then
                        GUICtrlSetData($Edit1, "Log: " & $_StdoutRead & @Crlf ,1)


Share this post

Link to post
Share on other sites


Here's something I did a while ago up...hope it helps...

; example of using stdout with network commands

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <EditConstants.au3>
#include <Constants.au3>
#include <StaticConstants.au3>

Local $Gui010  = GUICreate("Network Properties", 800, 600)
Local $Button1 = GUICtrlCreateButton("IPCONFIG",10,  10, 75, 25)
Local $Button2 = GUICtrlCreateButton("NETSTAT", 90, 10, 75, 25)
Local $clear   = GUICtrlCreateButton("Clear Display", 700, 10, 90, 25)
                 GUICtrlSetFont($clear,10,800,default,'times new roman')
                 GUICtrlCreateLabel("PARM = ",175,15,50,25)
Local $parm    = GUICtrlCreateEdit('',225,10,75,25,$ss_sunken)
Local $Edit010 = GUICtrlCreateEdit("", 10,40,780,550, $ES_AUTOVSCROLL + $WS_VSCROLL + $ws_hscroll + $es_readonly)
                 GUICtrlSetFont(-1,8.5,800,default,'courier new')


Local $rslt,$out

While 1
        $msg = GUIGetMsg()
            Case $msg = $GUI_EVENT_CLOSE
            Case $msg = $Button1
                $rslt = Run(@ComSpec & " /c ipconfig " & GUICtrlRead($parm), @SystemDir, @SW_HIDE, $STDERR_MERGED + $STDOUT_CHILD)
                While 1
                    $out = StdoutRead($rslt)
                    If @error then exitloop
                    GUICtrlSetData($edit010,$out & @lf,1)
            Case $msg = $Button2
                $rslt = Run(@ComSpec & " /c netstat " & GUICtrlRead($parm), @SystemDir, @SW_HIDE, $STDERR_MERGED + $STDOUT_CHILD)
                While 1
                    $out = StdoutRead($rslt)
                    If @error then exitloop
                    GUICtrlSetData($edit010,$out & @lf,1)
            Case $msg = $clear

func _do_exit_stuff()

    ; whatever you want here




2 people like this

Forum Rules         Procedure for posting code

"I like pigs.  Dogs look up to us.  Cats look down on us.  Pigs treat us as equals."

- Sir Winston Churchill

Share this post

Link to post
Share on other sites

I did a quick google search asking basically the same question and came across this reply. Just wanted to say thanks kylomas, is exactly what I was looking for.


Share this post

Link to post
Share on other sites

Glad it helped...

Forum Rules         Procedure for posting code

"I like pigs.  Dogs look up to us.  Cats look down on us.  Pigs treat us as equals."

- Sir Winston Churchill

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • Jibberish
      By Jibberish
      I am working on a Video Player Test Script. I am reading a text file into a 3d array to be displayed in a GUI.
      Array Content:
      [x][1]UsageCount -> Up to a 4 digit number
      [x][2]EnableUsageCount (True/False)
      In the GUI the user can check the filename box, edit the number of usages and check EnableUsageCount to turn on the UsageCount control using the UsageCount number for the maximum number of plays.
      To make this easier to deal with I have removed the EnableUsageCount section, and am just concentrating on getting a method to put the edited (or unchanged) UsageCount in the array. Currently nothing is read into the array, due to my using the wrong method in the Case statement.
      Here are code snippets of what I am trying to do:
      ; Snippets from script ; I read the text file at the bottom and put the .mp4 filenames in $aManifest[x][0] and UsageCount in $aManifest[x][1] ; Then I create a GUI to display the .mp4 filenames with checkboxes and the UsageCount to the right. UsageCount is editable by the user. ; If the filename is checked, I want to read the filename into $aCheckedVideos[x][0] and the updated UsageCount in $aCheckedVideos[x][1] ; The GUICtrlRead($aVideoName[$i]) with Case $GUI_CHECKED & UNCHECKED works for the checkboxes ; This section puts the filenames in the GUI with a checkbox For $i = 0 to $iMMCount Step 1 $sMP4Text = $aManifest[$i][0] $iMP4Length = StringLen($sMP4Text) $aVideoName[$i] = GUICtrlCreateCheckbox($sMP4Text,$iLeft, $iTop) $iTop += 30 Next ; This section reads numbers from the Manifest array, and I want to be able to change the number and have them saved. ; So the Case $GUI_CHECKED & UNCHECKED won't work here, and I can't figure out what I should be doing here. For $i = 0 to $iMMCount Step 1 $sUsageText = $aManifest[$i][1] $aUsageCount[$i] = GUICtrlCreateInput($sUsageText,$iLeft, $iTop, 50,18, $GUI_DOCKAUTO) GUICtrlSetPos($aUsageCount[$i],200) $iTop += 30 Next While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idCloseGUI For $i = 0 To $iMMNewCount Step 1 Switch GUICtrlRead($aVideoName[$i]) Case $GUI_CHECKED $aCheckedVideos[$i][0] = $aManifest[$i][0] ; If checked, I put the results into a two D array Case $GUI_UNCHECKED ; where Video Name is $aCheckedVideos[x][0] EndSwitch Switch GUICtrlRead($aUsageCounter[$i]) Case $GUI_CHECKED $aCheckedVideos[$i][1] = $aUsageCount[$i] ;I want to put the text (numbers) in $aCheckedVideos[x][1] Case $GUI_UNCHECKED ;but what is returned is blank, probably due to EndSwitch ; $GUI_CHECKED being the wrong thing. Next ExitLoop EndSwitch WEnd ;The txt file I'm reading has the following: ;~ /** Title #1: Big Buck Bunny 1080p **/ ;~ "Name": "Big Buck Bunny", ;~ "URI": "..\\MediaFiles\\bbb_1080_60s.mp4", ;~ "UsageCount": 9999, ;~ "URI": "..\\MediaFiles\\bbb_1080_60s_enc1.mp4", ;~ "UsageCount": 45, ;~ "URI": "..\\MediaFiles\\bbb_1080_60s_enc1.mp4", ;~ "UsageCount": 2, ;~ /** Title #2: Tears of Steel 4K **/ ;~ "Name": "Tears of Steel 4K", ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC.mp4", ;~ "UsageCount": 9876, ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC_enc2.mp4", ;~ "UsageCount": 0, ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC_enc2.mp4", ;~ "UsageCount": 5, I am certain that the section
                          Switch GUICtrlRead($aUsageCounter[$i])
                              Case $GUI_CHECKED
                                  $aCheckedVideos[$i][1] = $aUsageCount[$i]    ;I want to put the text (numbers) in $aCheckedVideos[x][1]
                              Case $GUI_UNCHECKED                                ;but what is returned is blank, probably due to
                          EndSwitch                                            ; $GUI_CHECKED being the wrong thing.

      is wrong, and this is what I am looking for help with. Instead of $GUI_CHECKED what should I be looking for?
      The worst part of this is I had this working late last night, and then lost my changes and cannot for the life of me remember how I had this working.
      Help is truly appreciated!
    • rootx
      By rootx
      How can I write a good output inside Edit control?
       4 example on notepad (windows) he looks terrible... but he looks perfect on notepad++ and cmd. THX
      GUICtrlSetData($Edit1, "Log: " & $_StdoutRead & @Crlf ,1) the log..
    • kashamalasha
      By kashamalasha
      Could you help me find the answer for my issue. I'm trying to set fomatted data wich is selected from SQL to GUICtrlCreateEdit field.
      And the GUICtrlSetData function is inserting it in one line. But when I'm trying to do the same using MsgBox the data looks fine.
      I'm trying to not use _GUICtrlRichEdit UDF.
      Thanks in advance. Here is my test code.
      #include <GUIConstants.au3> #include <GUIListBox.au3> #include <SQLite.au3> #include <SQLite.dll.au3> Opt("GUIOnEventMode", 1) $hMainGUI = GUICreate("Test", 520, 240) $hListBox = _GUICtrlListBox_Create($hMainGUI, "", 10, 10, 180, 80) $hEdit = GUICtrlCreateEdit("", 10, 80, 500, 150) GUISetState(@SW_SHOW, $hMainGUI) GUIRegisterMsg($WM_COMMAND, "_WM_COMMAND") Local $hQuery, $aRow _SQLite_Startup() $hDB = _SQLite_Open('MyDB.sqlite') _SQLite_Query(-1, "SELECT ID ||"". "" || Name FROM Templates ORDER BY ID;", $hQuery) While _SQLite_FetchData($hQuery, $aRow) = $SQLITE_OK _GUICtrlListBox_AddString($hListBox, $aRow[0]) WEnd GUISetOnEvent($GUI_EVENT_CLOSE, "CLOSE_Button") While 1 Sleep(100) WEnd Func _WM_COMMAND($hWnd, $iMsg, $wParam, $lParam) Local $hWndFrom, $iIDFrom, $iCode, $hWndListBox If Not IsHWnd($hListBox) Then $hWndListBox = GUICtrlGetHandle($hListBox) $hWndFrom = $lParam $iIDFrom = BitAND($wParam, 0xFFFF) ; Low Word $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case $hListBox, $hWndListBox Switch $iCode Case $LBN_DBLCLK Select_Template(_GUICtrlListBox_GetCurSel($hListBox) + 1) Return 0 EndSwitch EndSwitch EndFunc ;==>_WM_COMMAND Func CLOSE_Button() _SQLite_Close() _SQLite_Shutdown() Exit EndFunc ;==>CLOSE_Button Func Select_Template($sListItem) _SQLite_QuerySingleRow($hDB, _ "SELECT Content " & _ "FROM Templates " & _ "WHERE ID = " & $sListItem & ";", $aRow) ;~ MsgBox(64, "Test: " & $sListItem, $aRow[0]) GUICtrlSetData($hEdit, $aRow[0]) WinSetTitle($hMainGUI, "", "Test: " & $sListItem) EndFunc ;==>Select_Template  

    • Simpel
      By Simpel
      I'm trying to create a console reader. All is working but I have a problem with the look. I want the line numbers with another backgroundcolor in silver. I made this with a small silver label. The edit control over the label has a transparent background.
      But if I start the prog then i can see how the line numbers wipe the silver background off. And if I click into the Edit then the silver label disappears completely.
      #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <ColorConstants.au3> #include <StaticConstants.au3> #include <GuiEdit.au3> Opt("GUIOnEventMode", 1) Global $g_iZaehler = 0 Global $g_hGUI = GUICreate("Console: StdoutRead" , 800, 800, -1, -1, $WS_OVERLAPPEDWINDOW + $WS_CLIPCHILDREN, $WS_EX_ACCEPTFILES) GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit") Global $text = GUICtrlCreateEdit("",10,30,780,760, $ES_AUTOVSCROLL + $WS_VSCROLL + $ES_READONLY + $ES_NOHIDESEL) GUICtrlSetState(-1, $GUI_DROPACCEPTED) GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console") GUICtrlSetResizing(-1, $GUI_DOCKBORDERS) GUICtrlSetBkColor(-1, $GUI_BKCOLOR_TRANSPARENT) Global $g_LaZeilen = GUICtrlCreateLabel("Zeilen: " & StringFormat("% 5d", $g_iZaehler), 680, 10, 100, 9, $SS_LEFTNOWORDWRAP) GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console") GUICtrlSetResizing(-1, $GUI_DOCKRIGHT + $GUI_DOCKTOP + $GUI_DOCKSIZE) Global $g_hCbFreeze = GUICtrlCreateCheckbox("&Freeze", 13, 5, 90) GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console") GUICtrlSetResizing(-1, $GUI_DOCKALL) GUICtrlCreateLabel("", 11, 31, 42, 758) ; soll die Ziffern andersfarbig hinterlegen GUICtrlSetBkColor(-1, $COLOR_SILVER) GUICtrlSetResizing(-1, $GUI_DOCKLEFT + $GUI_DOCKTOP + $GUI_DOCKBOTTOM + $GUI_DOCKWIDTH) GUISetState(@SW_SHOW) Global $sText = StringFormat("% 5d", $g_iZaehler) & @CRLF _GUICtrlEdit_AppendText($text, $sText) While 1 Sleep(200) $g_iZaehler += 1 $sText = StringFormat("% 5d", $g_iZaehler) & @CRLF _GUICtrlEdit_AppendText($text, $sText) WEnd Func _Exit() Exit EndFunc Do you have any suggestions.
      Regards, Conrad
    • PINTO1927
      By PINTO1927
      Hi guys,
      I would like to implement the words in GuiCtrlCreateEdit through the choices the GuiCtrlCreateCombo. Each item in the GuiCtrlCreateCombo must contain the words that are to be reported later in the GuiCtrlCreateEdit. I have attached an example , I added just a GuiCtrlCreateCombo , then it will insert more.
      Thanks for the attention