Verssuss

how to add variable/parametr to ListView

8 posts in this topic

#1 ·  Posted

 

Hello. The case is complicated as if otherwise ... I'm going to add a parameter or an independent variable (assigned forever to the given item (not to the index)) I have some ideas but everything goes down when an item is drag & drop ...

All what i want is add variable/param to choosen item and move it by any possible way with variable/param added before...
I always move Item but it lost variable/param ;/

here is 2 way i try

#AutoIt3Wrapper_UseX64=Y
#include "GUIListViewEx.au3"
#include <WindowsConstants.au3>
#include <GUIListView.au3>
#include <GUIImageList.au3>
#include <GUIConstantsEx.au3>
#include <GuiImageList.au3>
#include <GuiListView.au3>
#include <WindowsConstants.au3>

HotKeySet("z", "_set_param")
HotKeySet("x", "_show_params")

$Main_GUI = GUICreate("Drag & Drop LV Item", 225, 400, -1, -1, BitOR($WS_THICKFRAME, $WS_SIZEBOX))
$ListView = GUICtrlCreateListView("Entry Name|Category", 5, 75, 195, 280, 0)
$iLV_Index = _GUIListViewEx_Init($ListView, "", 0, 0, True, 1 + 2 + 8)
_GUICtrlListView_SetExtendedListViewStyle($ListView, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_GRIDLINES))

Global $vData, $iEditMode = 0
_GUIListViewEx_MsgRegister()

For $i = 0 To 9
    Global $vData[] = ["Item " & $i]
    _GUIListViewEx_Insert($vData)
Next

GUISetState()

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
    $vRet = _GUIListViewEx_EventMonitor($iEditMode)
WEnd

Func _set_param() ; HOTKEY Z
    _GUICtrlListView_SetItemParam($Listview, _GUICtrlListView_GetSelectedIndices($Listview), 11111)
EndFunc

Func _show_params() ; HOTKEY X
MsgBox($MB_SYSTEMMODAL, "Information", "Item 0 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 0))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 1 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 1))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 2 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 2))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 3 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 3))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 4 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 4))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 5 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 5))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 6 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 6))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 7 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 7))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 8 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 8))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 9 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 9))
EndFunc

and another

#include <WindowsConstants.au3>
#include <GUIListView.au3>
#include <GUIImageList.au3>
#include <GUIConstantsEx.au3>
#include <GuiImageList.au3>
#include <GuiListView.au3>
#include <WindowsConstants.au3>

HotKeySet("z", "_set_param")
HotKeySet("x", "_show_params")

Global $iLast_Index = -1
Global $a_Index[2] ;From and to
Global $iLastLineTop, $iLastLineLeft

Global $iDragging = False
Global $iDrawing = False ;To ensure mousemove doesn't cause more than one line to be drawn
Global $iLButtonIsUp = False ;To ensure a correct redraw of ListView

$Main_GUI = GUICreate("Drag & Drop LV Item", 225, 400, -1, -1, BitOR($WS_THICKFRAME, $WS_SIZEBOX))

$ListView = GUICtrlCreateListView("Entry Name|Category", 5, 75, 195, 280, 0)
$h_ListView = GUICtrlGetHandle($ListView)

$nExStyle = BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES)
GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $nExStyle, $nExStyle)

For $i = 0 To 9
    _GUICtrlListView_InsertItem($Listview, "Item " & $i, $i)
Next

GUISetState()

GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY_EVENTS")
GUIRegisterMsg($WM_LBUTTONUP, "WM_LBUTTONUP_EVENTS")
GUIRegisterMsg($WM_MOUSEMOVE, "WM_MOUSEMOVE_EVENTS")

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch

    If $iLButtonIsUp Then
        $iLButtonIsUp = False
        DllCall("User32.dll", "int", "RedrawWindow", "hwnd", $h_ListView, "ptr", 0, "int", 0, "int", 5)
    EndIf
WEnd

Func WM_LBUTTONUP_EVENTS($hWndGUI, $MsgID, $wParam, $lParam)
    If $iDragging = False Then Return $GUI_RUNDEFMSG
    $iLButtonIsUp = True
    $iDragging = False
    $iDrawing = False

    $iLast_Index = -1

    Local $aLV_Pos = ControlGetPos($hWndGUI, "", $ListView)

    Local $iX = BitAND($lParam, 0xFFFF) - $aLV_Pos[0]
    Local $iY = BitShift($lParam, 16) - $aLV_Pos[1]

    Local $struct_LVHITTESTINFO = DllStructCreate("int;int;uint;int;int;int")

    DllStructSetData($struct_LVHITTESTINFO, 1, $iX)
    DllStructSetData($struct_LVHITTESTINFO, 2, $iY)

    $a_Index[1] = GUICtrlSendMsg($ListView, $LVM_HITTEST, 0, DllStructGetPtr($struct_LVHITTESTINFO))
    Local $iFlags = DllStructGetData($struct_LVHITTESTINFO, 2)

    ;// Out of the ListView?
    If $a_Index[1] = -1 Then $a_Index[1] = _GUICtrlListView_GetItemCount($h_ListView) ;Return $GUI_RUNDEFMSG

    If $a_Index[0] < $a_Index[1] Then
        _GUICtrlListView_CopyItemsEx($h_ListView, $h_ListView, $a_Index[1], True)
    ElseIf $a_Index[0] > $a_Index[1] Then
        _GUICtrlListView_CopyItemsEx($h_ListView, $h_ListView, $a_Index[1], True,1)
    EndIf

    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_LBUTTONUP_EVENTS

Func WM_MOUSEMOVE_EVENTS($hWndGUI, $MsgID, $wParam, $lParam)
    If Not $iDragging Or $iDrawing Then Return $GUI_RUNDEFMSG

    Local $aLV_Pos = ControlGetPos($hWndGUI, "", $ListView)

    Local $iX = BitAND($lParam, 0xFFFF) - $aLV_Pos[0]
    Local $iY = BitShift($lParam, 16) - $aLV_Pos[1]

    Local $struct_LVHITTESTINFO = DllStructCreate("int;int;uint;int;int;int")

    DllStructSetData($struct_LVHITTESTINFO, 1, $iX)
    DllStructSetData($struct_LVHITTESTINFO, 2, $iY)

    Local $iItem = GUICtrlSendMsg($ListView, $LVM_HITTEST, 0, DllStructGetPtr($struct_LVHITTESTINFO))
    If $iItem = -1 Then $iItem = _GUICtrlListView_GetItemCount($h_ListView) ;Return $GUI_RUNDEFMSG

    If $iLast_Index = $iItem Then Return $GUI_RUNDEFMSG

    If $iLast_Index > $iItem Then ;Move up
        _GUICtrlListView_RedrawItems($h_ListView, $iItem, $iLast_Index)
    Else
        _GUICtrlListView_RedrawItems($h_ListView, $iLast_Index, $iItem - 1)
    EndIf

    $iLast_Index = $iItem

    Local $aLV_Pos = ControlGetPos($hWndGUI, "", $ListView)
    Local $iY = _GUICtrlListView_GetItemPositionY($h_ListView, $iItem)
    If $iY <= 0 Then Return $GUI_RUNDEFMSG

    _DrawLine($aLV_Pos[0], $iY, $aLV_Pos[2], 2.5, 0x000000, $h_ListView)
EndFunc   ;==>WM_MOUSEMOVE_EVENTS

Func WM_NOTIFY_EVENTS($hWndGUI, $MsgID, $wParam, $lParam)
    Local $tagNMHDR, $iEvent, $hwndFrom, $iCode, $iItem
    $tagNMHDR = DllStructCreate("int;int;int;int", $lParam) ;NMHDR (hwndFrom, idFrom, code, Item)
    If @error Then Return $GUI_RUNDEFMSG

    $iCode = DllStructGetData($tagNMHDR, 3)
    $iItem = DllStructGetData($tagNMHDR, 4)

    Switch $wParam
        Case $ListView
            Switch $iCode
                Case $LVN_BEGINDRAG
                    $a_Index[0] = $iItem
                    $iDragging = True
            EndSwitch
    EndSwitch

    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY_EVENTS

;A try to make a multiple selection support for moved items
Func _GUICtrlListView_CopyItemsEx($hWnd_Source, $hWnd_Destination, $iDstIndex, $fDelFlag = False,$ind_flag=0)
    Local $a_indices, $tItem = DllStructCreate($tagLVITEM), $iIndex, $movedInd = 0
    Local $cols = _GUICtrlListView_GetColumnCount($hWnd_Source)
    Local $items = _GUICtrlListView_GetItemCount($hWnd_Source)

    _GUICtrlListView_BeginUpdate($hWnd_Source)
    _GUICtrlListView_BeginUpdate($hWnd_Destination)

    If BitAND(_GUICtrlListView_GetExtendedListViewStyle($hWnd_Source), $LVS_EX_CHECKBOXES) == $LVS_EX_CHECKBOXES Then
        For $i = 0 To $items - 1
            If _GUICtrlListView_GetItemChecked($hWnd_Source, $i) Then
                If IsArray($a_indices) Then
                    ReDim $a_indices[UBound($a_indices) + 1]
                Else
                    Local $a_indices[2]
                EndIf

                $a_indices[0] = $a_indices[0] + 1
                $a_indices[UBound($a_indices) - 1] = $i
            EndIf
        Next

        If UBound($a_indices) > 1 Then
            For $i = 1 To $a_indices[0]
                DllStructSetData($tItem, "Mask", BitOR($LVIF_GROUPID, $LVIF_IMAGE, $LVIF_INDENT, $LVIF_PARAM, $LVIF_STATE))
                DllStructSetData($tItem, "Item", $a_indices[$i]+$movedInd*$ind_flag)
                DllStructSetData($tItem, "SubItem", 0)
                DllStructSetData($tItem, "StateMask", -1)

                _GUICtrlListView_GetItemEx($hWnd_Source, $tItem)
                $iIndex = _GUICtrlListView_InsertItem($hWnd_Destination, _
                    _GUICtrlListView_GetItemText($hWnd_Source, $a_indices[$i]+$movedInd*$ind_flag, 0), $iDstIndex, DllStructGetData($tItem, "Image"))
                _GUICtrlListView_SetItemChecked($hWnd_Destination, $iIndex)

                $iDstIndex += 1
                $movedInd += 1

                For $x = 1 To $cols - 1
                    DllStructSetData($tItem, "Item", $a_indices[$i]+$movedInd*$ind_flag)
                    DllStructSetData($tItem, "SubItem", $x)
                    _GUICtrlListView_GetItemEx($hWnd_Source, $tItem)
                    _GUICtrlListView_AddSubItem($hWnd_Destination, $iIndex, _
                        _GUICtrlListView_GetItemText($hWnd_Source, $a_indices[$i]+$movedInd*$ind_flag, $x), $x, DllStructGetData($tItem, "Image"))
                Next

                _GUICtrlListView_SetItemSelected($hWnd_Source, $iIndex, True)
                $movedInd += 1
            Next

            If $fDelFlag Then
                For $i = $a_indices[0] To 1 Step -1
                    _GUICtrlListView_DeleteItem($hWnd_Source, $a_indices[$i])
                Next
            EndIf
        EndIf
    EndIf

    If _GUICtrlListView_GetSelectedCount($hWnd_Source) Then
        $a_indices = _GUICtrlListView_GetSelectedIndices($hWnd_Source, 1)

        For $i = 1 To $a_indices[0]
            $i_Index = $a_indices[$i]+$movedInd*$ind_flag

            DllStructSetData($tItem, "Mask", BitOR($LVIF_GROUPID, $LVIF_IMAGE, $LVIF_INDENT, $LVIF_PARAM, $LVIF_STATE))
            DllStructSetData($tItem, "Item", $i_Index)
            DllStructSetData($tItem, "SubItem", 0)
            DllStructSetData($tItem, "StateMask", -1)

            _GUICtrlListView_GetItemEx($hWnd_Source, $tItem)
            $iIndex = _GUICtrlListView_InsertItem($hWnd_Destination, _
                _GUICtrlListView_GetItemText($hWnd_Source, $i_Index, 0), $iDstIndex, DllStructGetData($tItem, "Image"))

            $iDstIndex += 1
            $movedInd += 1
            $i_Index = $a_indices[$i]+$movedInd*$ind_flag

            For $x = 1 To $cols - 1
                DllStructSetData($tItem, "Item", $i_Index)
                DllStructSetData($tItem, "SubItem", $x)
                _GUICtrlListView_GetItemEx($hWnd_Source, $tItem)
                _GUICtrlListView_AddSubItem($hWnd_Destination, $iIndex, _
                    _GUICtrlListView_GetItemText($hWnd_Source, $i_Index, $x), $x, DllStructGetData($tItem, "Image"))
            Next

            _GUICtrlListView_SetItemSelected($hWnd_Source, $iIndex, True)
        Next

        If $fDelFlag Then
            For $i = $a_indices[0] To 1 Step -1
                _GUICtrlListView_DeleteItem($hWnd_Source, $a_indices[$i]+$ind_flag*$a_indices[0])
            Next
        EndIf
    EndIf

    _GUICtrlListView_EndUpdate($hWnd_Source)
    _GUICtrlListView_EndUpdate($hWnd_Destination)
EndFunc

Func _DrawLine($iLeft, $iTop, $iWidth, $iHeight, $sColor, $hWnd = 0)
    $iDrawing = True
    $sColor = Hex("0x" & BitAND(BitShift(String(Binary($sColor)), 8), 0xFFFFFF)) ;RGB2BGR

    Local $hDC = DllCall("User32.dll", "int", "GetDC", "hwnd", $hWnd)
    Local $aPen = DllCall("GDI32.dll", "int", "CreatePen", "int", 0, "int", $iHeight, "int", $sColor)

    DllCall("GDI32.dll", "int", "SelectObject", "int", $hDC[0], "int", $aPen[0])

    If $iLastLineTop > -1 And $iLastLineLeft > -1 Then
        If $iLastLineTop <> $iTop Then

            $iLastLineLeft = $iLeft
            $iLastLineTop = $iTop

            DllCall("user32.dll", "int", "InvalidateRect", "hwnd", $hWnd, "int", 0, "int", 1)
            Sleep(10) ;seems to be needed to ensure redrawn before line is drawn
        EndIf
    EndIf

    DllCall("GDI32.dll", "int", "MoveToEx", "hwnd", $hDC[0], "int", $iLeft, "int", $iTop, "int", 0)
    DllCall("GDI32.dll", "int", "LineTo", "hwnd", $hDC[0], "int", $iLeft + $iWidth, "int", $iTop)

    DllCall("user32.dll", "int", "ReleaseDC", "hwnd", $hWnd, "int", $hDC[0])
    DllCall("GDI32.dll", "int", "DeleteObject", "int", $aPen[0])

    $iDrawing = False
EndFunc   ;==>_DrawLine

Func _set_param() ; HOTKEY Z
    _GUICtrlListView_SetItemParam($Listview, _GUICtrlListView_GetSelectedIndices($Listview), 11111)
EndFunc   ;==>_quit

Func _show_params() ; HOTKEY X
MsgBox($MB_SYSTEMMODAL, "Information", "Item 0 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 0))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 1 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 1))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 2 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 2))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 3 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 3))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 4 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 4))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 5 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 5))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 6 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 6))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 7 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 7))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 8 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 8))
MsgBox($MB_SYSTEMMODAL, "Information", "Item 9 Parameter: " & _GUICtrlListView_GetItemParam($ListView, 9))
EndFunc

 

Use the Z key to set parameter 11111 on the current item

With the X key we read the parameters from all the items

As I said when indexes 0,1,2 set this parameter, the reading is correct ... while the item is moved to another position, it simply loses part of the information ...

This does not have to be a parameter. Any method is acceptable if it was not visible in the ListView, and the added value persisted after moving the item to another location. First example need Malba23's UDF GUIListViewEx.au3

 

Please help !!!

Share this post


Link to post
Share on other sites



#2 ·  Posted

Verssuss,

When using native-created ListViews, AutoIt uses the item parameter to store the ControlID of the row - so playing with this value is not a good idea. If you want to associate a value with a certain entry, I suggest you create a hidden (or zero-width) column to store this additional data - I have found that to be a very good method in the past.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

#3 ·  Posted

sure i already tested that and its low skilled option even each single action on yours 'hidden' box gonna shows again
and ANYWAY i have to do to many column for that coz i need lot of variables. or u show they way to do it on strings ( like separate it ) to keep it in just one column

im sure also there is a way to do it right. 

im not that pro to get fun at 3D variables or something but im sure its possible

Share this post


Link to post
Share on other sites

#4 ·  Posted

Verssuss,

Quote

im sure also there is a way to do it right

Fine, good luck with your search.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

#5 ·  Posted

@Melba23

There are none so deaf as he that will not hear  :)

Share this post


Link to post
Share on other sites

#6 ·  Posted

so there is the way to permanent hide any column ? even i have 5 of this ?

show me plz the right way then

Share this post


Link to post
Share on other sites

#7 ·  Posted

Nothing more than what Melba already said
Create the column and set it permanently to zero-width using _GUICtrlListView_SetColumnWidth

Share this post


Link to post
Share on other sites

#8 ·  Posted

well. i try my best and now i have example what make it impossible to do...
lets see we have 1000 rows already... and i insert specyfic item on 5 row...
if we want get back right parametr we have to change all params form 5 to end of the list lol

sorry i just realized that...

i still know its possible but it will take to long to change all items into right way

tell me im right xD

 

i have to stay in hidden columns but i will ask about it latter
PEACE

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now