jacoporicci

Problem when nesting functions

9 posts in this topic

#1 ·  Posted (edited)

Hello, I'm almost a newbie with Autoit because I'm not a programmer but I use it to solve problems in my job (Lighting Designer/Programmer).

I've a problem compiling this script, it says that there's no EndFunc declaration for the function at line 205, if I delete that section I've the same problem with the function at line 213. Can someone help me figuring out where's the problem?

 

Thank you!

 

P.s. The code is not entirely mine, is based on a MIDI client and a Telnet Server I've found on the internet and modified them to suit my needs. The two "big" codes, the midi part and the telnet part work on their own but I wanted to make everything inside the same script to be able to choose which one I want to use.

 

P.s2. I've the same problem with every function inside the two big functions "_midi" and "_telnet" even if they're ended with EndFunc.

 

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <EditConstants.au3>
#include <StaticConstants.au3>

;Includes for the MIDI receiver
#include <WinAPI.au3>
#include <MIDI.au3>

;Misc declarations
Global $software_title = ""
Global $atem_window_title = "" ;SET HERE BLACKMAGIC ATEM CONTROL SOFTWARE WINDOW NAME
Opt("WinTitleMatchMode", 2)

;USER INTERFACE
Global $main_gui = GUICreate($software_title, 364, 92, 287, 261, BitOR($WS_SYSMENU, $WS_CAPTION))
$Button1 = GUICtrlCreateButton("Telnet Input", 32, 16, 121, 49)
$Button2 = GUICtrlCreateButton("Midi Input", 201, 18, 121, 49)
GUISetState(@SW_SHOW)
;END USER INTERFACE


While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

         Case $Button1
            GUIDelete()
            Call("telnet")

         Case $Button2
            GUIDelete()
            Call ("midi")

    EndSwitch
WEnd


;-----------------------------------------------------------------------------------------------

Func _telnet()

;USER INTERFACE
$telnet_gui = GUICreate($software_title, 399, 174, 192, 124)
$telnet_status_edit = GUICtrlCreateEdit("", 24, 40, 353, 121)
GUICtrlSetData(-1, "")
$Label1 = GUICtrlCreateLabel("TELNET CONTROL", 144, 8, 101, 17)
GUISetState(@SW_SHOW)
;END USER INTERFACE



   ;; Do not touch these "settings" / global variables
Global Const $sAppName = ""
Global Const $nVersion = 1.0
Global Const $sWelcomeMessage = $sAppName & " [Version " & $nVersion & "]" & @CRLF & ""

GUICtrlSetData($telnet_status_edit, $sWelcomeMessage & @CRLF, 1)

;; TCP Variables
Dim $sMaxConnections = 10
Dim $sSocket[$sMaxConnections], $sBuffer[$sMaxConnections], $iAuth[$sMaxConnections]

;; TCP Options
Dim $sIPAddress = @IPAddress1, $nPort = 23

TCPStartup()
GUICtrlSetData($telnet_status_edit, "Starting TCP" & @CRLF, 1)

$sMainSocket = TCPListen($sIPAddress, $nPort, 5)

If @error Then
    Switch @error
        Case 1
            _FatalError("The listening address was incorrect (Possibly another server was already running): " & $sIPAddress)
            GUICtrlSetData($telnet_status_edit, "The listening address was incorrect (Possibly another server was already running): " & $sIPAddress & @CRLF, 1)
        Case 2
            _FatalError("The listening port was incorrect (Possibly another server was already running): " & $nPort)
            GUICtrlSetData($telnet_status_edit, "The listening port was incorrect (Possibly another server was already running): " & $nPort & @CRLF, 1)
        Case Else
            _FatalError("Unable to set up a listening server on " & $sIPAddress & ":" & $nPort)
            GUICtrlSetData($telnet_status_edit, "Unable to set up a listening server on " & $sIPAddress & ":" & $nPort & @CRLF, 1)
    EndSwitch
EndIf

While 1
    ;; Accept new incoming clients, and ask them to authorise.
    $sNewSocket = TCPAccept($sMainSocket)
    If $sNewSocket > -1 Then
        For $x = 0 To UBound($sSocket) - 1
            If Not $sSocket[$x] Then
                $sSocket[$x] = $sNewSocket
                $iAuth[$x] = 0
                TCPSend($sSocket[$x], $sWelcomeMessage & @CRLF & @CRLF)
                GUICtrlSetData($telnet_status_edit, "Connection established. Server ip and port: " & $sIPAddress & ":" & $nPort & @CRLF, 1)
                ExitLoop
            EndIf
        Next
    EndIf

    ;; Loop through existing connections, check if they sent us any data
    For $x = 0 To UBound($sSocket) - 1
        If $sSocket[$x] Then

            ;; Handle incoming data
            $sData = TCPRecv($sSocket[$x], 100)
            $sBuffer[$x] &= $sData
            If @error Then
                TCPCloseSocket($sSocket[$x])
                $sSocket[$x] = ""
                $sBuffer[$x] = ""
                $iAuth[$x] = 0
            ElseIf Asc($sData) = 0x8 Then ;backspace received
                $len = StringLen($sBuffer[$x])
                $sBuffer[$x] = StringTrimRight($sBuffer[$x], 2) ; trim the buffer
                If $len = 1 Then
                    TCPSend($sSocket[$x], ">")
                Else
                    TCPSend($sSocket[$x], " " & Chr(0x8))
                EndIf
             EndIf



            ;; Handle data, in case data is complete: ended with newline
            If StringInStr($sBuffer[$x], @CRLF) Then
                $sBuffer[$x] = StringTrimRight($sBuffer[$x], 2)

                    ;; Is authorised with password, do some commands
                    Switch $sBuffer[$x]

                        Case "quit", "q", "exit"
                            ; Closes the server on the remote client
                            TCPCloseSocket($sSocket[$x])
                            $sSocket[$x] = ""
                            $sBuffer[$x] = ""
                            $iAuth[$x] = 0

                        Case "cam1"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}1{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 1" & @CRLF, 1)

                        Case "cam2"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}2{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 2" & @CRLF, 1)

                        Case "cam3"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}3{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 3" & @CRLF, 1)

                        Case "cam4"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}4{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 4" & @CRLF, 1)

                        Case "cam5"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}5{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 5" & @CRLF, 1)

                        Case "cam6"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}6{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 6" & @CRLF, 1)

                        Case "cam7"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}7{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 7" & @CRLF, 1)

                        Case "cam8"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}8{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 8" & @CRLF, 1)

                        Case "cam9"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}9{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 9" & @CRLF, 1)

                        Case "cam10"
                           SendKeepActive($atem_window_title)
                           Send("{CTRLDOWN}0{CTRLUP}")
                           GUICtrlSetData($telnet_status_edit, "Switching to Camera 9" & @CRLF, 1)

                        Case "?", "help"
                           GUICtrlSetData($telnet_status_edit, "Sending help" & @CRLF, 1)
                            TCPSend($sSocket[$x], @CRLF & "quit" & @TAB & @TAB & "Closes connection to the Server" & @CRLF & _
                                    "Cam+numberofcamera" & @TAB & @TAB & "Switches to selected camera 1-10" & @CRLF & _
                                    "help" & @TAB & "View this help message again")
                    EndSwitch
                    TCPSend($sSocket[$x], @CRLF & ">")
                EndIf
                $sBuffer[$x] = ""
            EndIf
    Next
WEnd

Func MessageBroadcast($sMsg)
    For $n = 0 To UBound($sSocket) - 1
        If $sSocket[$n] AND $iAuth[$n] == 1 Then
            TCPSend($sSocket[$n], $sMsg)
        EndIf
    Next
EndFunc   ;==>MessageBroadcast

Func _FatalError($msg)
    ConsoleWrite(@CRLF & "! " & $msg & @CRLF)
    MsgBox(0, $sAppName & $nVersion, "A fatal error has occured and " & $sAppName & " has to be closed with the error message: " & @CRLF & $msg)
    Exit
EndFunc

EndFunc


;----------------------------------------------------------------------------------------------


 Func _midi()

Opt("MustDeclareVars", 1)
Opt("GUIOnEventMode", 1)
Opt("WinTitleMatchMode", 2)

Global $hGui = GUICreate($software_title, 1000, 420)
GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit")
Global $cCombo = GUICtrlCreateCombo("", 10, 10, 400, 20)
Global $cButton_Start = GUICtrlCreateButton("Start", 420, 10, 80, 20)
GUICtrlSetOnEvent(-1, "_Midi_Start")
Global $cButton_Stop = GUICtrlCreateButton("Stop", 510, 10, 80, 20)
GUICtrlSetOnEvent(-1, "_Midi_Stop")
GUICtrlCreateLabel("MIM_DATA", 10, 40, 100, 20)
Global $cEdit_Data = GUICtrlCreateEdit("", 10, 60, 485, 350)
GUICtrlCreateLabel("MIM_LONGDATA", 505, 40, 100, 20)
Global $cEdit_LongData = GUICtrlCreateEdit("", 505, 60, 485, 350)
GUISetState()


_Midi_Startup()
Global $tBuffer1 = _CreateBuffer()
Global $tBuffer2 = _CreateBuffer()
_GetDevices()

Global $hMidi = 0
Global $bRelease = False
Global $iDeviceCurrent = -1


GUIRegisterMsg($MM_MIM_CLOSE, "_MidiWinProc")
GUIRegisterMsg($MM_MIM_DATA, "_MidiWinProc")
GUIRegisterMsg($MM_MIM_ERROR, "_MidiWinProc")
GUIRegisterMsg($MM_MIM_LONGDATA, "_MidiWinProc")
GUIRegisterMsg($MM_MIM_LONGERROR, "_MidiWinProc")
GUIRegisterMsg($MM_MIM_MOREDATA, "_MidiWinProc")
GUIRegisterMsg($MM_MIM_OPEN, "_MidiWinProc")

While Sleep(100)
WEnd



Func _ProcessLongData($pData, $iBytes)
    Local $tGetData = DllStructCreate("byte[" & $iBytes & "];", $pData)
    GUICtrlSetData($cEdit_LongData, DllStructGetData($tGetData, 1) & @CRLF, 1)
EndFunc   ;==>_ProcessLongData


Func _ProcessData($iMidiMessage)


    Local $iLoWord = _WinAPI_LoWord($iMidiMessage)
    Local $iHiWord = _WinAPI_HiWord($iMidiMessage)

    Local $bStatus = BitAND($iLoWord, 0xFF) ;LoByte
    Local $bData1 = BitShift($iLoWord, 8) ;HiByte
    Local $bData2 = BitAND($iHiWord, 0xFF) ;LoByte

    Local $Chan = BitAND($bStatus, 0xF)
    Local $MidiMsg = BitShift($bStatus, 4)

    GUICtrlSetData($cEdit_Data, "StatusByte: " & $bStatus & @TAB & "DataByte1: " & $bData1 & @TAB & "DataByte2: " & $bData2 & @CRLF, 1)

    Switch $MidiMsg

        Case 0x8 ; Note Off
            GUICtrlSetData($cEdit_Data, @TAB & "NoteOff: MidiChannel: " & $Chan & @TAB & "NoteNumber: " & $bData1 & @TAB & "Velocity: " & $bData2c)

        Case 0x9 ; Note On
            GUICtrlSetData($cEdit_Data, @TAB & "NoteOn: MidiChannel: " & $Chan & @TAB & "NoteNumber: " & $bData1 & @TAB & "Velocity: " & $bData2 & @CRLF, 1)

        Case 0xA ; Polyphonic aftertouch
            GUICtrlSetData($cEdit_Data, @TAB & "Polyphonic aftertouch: MidiChannel: " & $Chan & @TAB & "NoteNumber: " & $bData1 & @TAB & "Poly Pressure: " & $bData2 & @CRLF, 1)

        Case 0xB ; Control Change
            GUICtrlSetData($cEdit_Data, @TAB & "Control Change: MidiChannel: " & $Chan & @TAB & "Controller: " & $bData1 & @TAB & "Value: " & $bData2 & @CRLF, 1)

        Case 0xC ; Program Change
            GUICtrlSetData($cEdit_Data, @TAB & "Program Change: MidiChannel: " & $Chan & @TAB & "Programm: " & $bData1 & @CRLF, 1)

        Case 0xD ; Channel aftertouch
            GUICtrlSetData($cEdit_Data, @TAB & "Channel aftertouch: MidiChannel: " & $Chan & @TAB & "Aftertouch : " & $bData1 & @CRLF, 1)

        Case 0xE ; Pitch Bend
            GUICtrlSetData($cEdit_Data, @TAB & "Pitch Bend: MidiChannel: " & $Chan & @TAB & "LSB: " & $bData1 & @TAB & "MSB: " & $bData2 & @CRLF, 1)


    EndSwitch

If $bData1 == 1 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}1{CTRLUP}")
   EndIf
EndIf

If $bData1 == 2 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}2{CTRLUP}")
   EndIf
EndIf

If $bData1 == 3 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}3{CTRLUP}")
   EndIf
EndIf

If $bData1 == 4 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}4{CTRLUP}")
   EndIf
EndIf

If $bData1 == 5 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}5{CTRLUP}")
   EndIf
EndIf

If $bData1 == 6 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}6{CTRLUP}")
   EndIf
EndIf

If $bData1 == 7 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}7{CTRLUP}")
   EndIf
EndIf

If $bData1 == 8 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}8{CTRLUP}")
   EndIf
EndIf

If $bData1 == 9 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}9{CTRLUP}")
   EndIf
EndIf

If $bData1 == 10 Then
   If $bData2 == 127 Then
      SendKeepActive($atem_window_title)
      Send("{CTRLDOWN}0{CTRLUP}")
   EndIf
EndIf

EndFunc   ;==>_ProcessData





Func _MidiWinProc($hWnd, $iMsg, $wParam, $lParam)
    Switch $iMsg
        Case $MIM_OPEN
            ConsoleWrite("> MIM_OPEN" & @CRLF)

        Case $MIM_CLOSE ;hMidi Handle ab jetzt ungültig
            ConsoleWrite("> MIM_CLOSE" & @CRLF)
            $hMidi = 0

        Case $MIM_DATA ; Normale Midi MSG
            ConsoleWrite("> MIM_DATA" & @CRLF)
            _ProcessData($lParam)

        Case $MIM_MOREDATA
            ConsoleWrite("> MIM_MOREDATA" & @CRLF)

        Case $MIM_LONGDATA
            ConsoleWrite("> MIM_LONGDATA" & @CRLF)

            Switch $bRelease
                Case False ; SysEx Daten kommen rein
                    Local $tMidiHDR = DllStructCreate($MIDIHDR, $lParam)
                    Local $iBytesRecorded = DllStructGetData($tMidiHDR, "dwBytesRecorded")
                    ConsoleWrite("+ LONGDATA IN: " & $iBytesRecorded & " bytes" & @CRLF)

                    _ProcessLongData(DllStructGetData($tMidiHDR, "lpData"), $iBytesRecorded)

                    _MidiIn_AddBuffer($hMidi, $lParam, 48)

                Case Else ; Druch _MidiIn_Reset wird hier der Buffer zurückgegeben und muss hier "unprepared" werden
                    ConsoleWrite("! Unprepare Buffer" & @CRLF)
                    _MidiIn_UnprepareHeader($hMidi, $lParam, 48)

            EndSwitch

        Case $MIM_ERROR
            ConsoleWrite("> MIM_ERROR" & @CRLF)

        Case $MIM_LONGERROR
            ConsoleWrite("> MIM_LONGERROR" & @CRLF)
            _MidiIn_AddBuffer($hMidi, $lParam, 48)

    EndSwitch
EndFunc   ;==>_MidiWinProc




Func _Midi_Start()
    ConsoleWrite(@CRLF & "!=============================" & @CRLF)
    ConsoleWrite("! starting..." & @CRLF & @CRLF)
    Local $aRegExp = StringRegExp(GUICtrlRead($cCombo), "<(\d+)>", 3)
    If @error Or Not IsArray($aRegExp) Then Return
    Local $iDevice = $aRegExp[0]

    If $iDevice = $iDeviceCurrent Then
        ConsoleWrite("- already running" & @CRLF)
        Return
    EndIf

    $bRelease = False

    Local $iRet


    If $hMidi <> 0 Then _Midi_Stop()
    $hMidi = _MidiIn_Open($iDevice, $hGui, 0, BitOR($CALLBACK_WINDOW, $MIDI_IO_STATUS))
    ConsoleWrite("! MidiIn Open: " & $hMidi & " error: " & @error & @CRLF)
    $iDeviceCurrent = $iDevice

    $iRet = _MidiIn_PrepareHeader($hMidi, DllStructGetPtr($tBuffer1, "lpData"), 48)
    ConsoleWrite("! Prepare Header: " & $iRet & " error: " & @error & @CRLF)
    $iRet = _MidiIn_PrepareHeader($hMidi, DllStructGetPtr($tBuffer2, "lpData"), 48)
    ConsoleWrite("! Prepare Header: " & $iRet & " error: " & @error & @CRLF)

    $iRet = _MidiIn_AddBuffer($hMidi, DllStructGetPtr($tBuffer2, "lpData"), 48)
    ConsoleWrite("! Add Buffer: " & $iRet & " error: " & @error & @CRLF)
    $iRet = _MidiIn_AddBuffer($hMidi, DllStructGetPtr($tBuffer1, "lpData"), 48)
    ConsoleWrite("! Add Buffer: " & $iRet & " error: " & @error & @CRLF)

    $iRet = _MidiIn_Start($hMidi)
    ConsoleWrite("! MidiIn Start: " & $iRet & " error: " & @error & @CRLF)


EndFunc   ;==>_Midi_Start



Func _Midi_Stop()
    ConsoleWrite(@CRLF & "!=============================" & @CRLF)
    ConsoleWrite("! stopping..." & @CRLF & @CRLF)

    $bRelease = True

    Local $iRet
    $iRet = _MidiIn_Reset($hMidi)
    ConsoleWrite("! MidiIn Reset: " & $iRet & " error: " & @error & @CRLF)
    $iRet = _MidiIn_Stop($hMidi)
    ConsoleWrite("! MidiIn Stop: " & $iRet & " error: " & @error & @CRLF)
    $iRet = _MidiIn_Close($hMidi)
    ConsoleWrite("! MidiIn Close: " & $iRet & " error: " & @error & @CRLF)

    $iDeviceCurrent = -1
EndFunc   ;==>_Midi_Stop




Func _GetDevices()
    Local $tMidiInCaps = DllStructCreate($MIDIINCAPS)
    Local $pMidiInCaps = DllStructGetPtr($tMidiInCaps)
    Local $iMidiInCaps = DllStructGetSize($tMidiInCaps)

    Local $iDeviceCnt = _MidiIn_GetNumDevs()
    Local $sDevice = ""
    Local $sDefault = ""

    For $i = 0 To ($iDeviceCnt - 1)
        _MidiIn_GetDevCaps($i, $pMidiInCaps, $iMidiInCaps)
        $sDevice &= "<" & $i & "> " & DllStructGetData($tMidiInCaps, "szPname") & "|"
        If $i = 0 Then $sDefault = "<" & $i & "> " & DllStructGetData($tMidiInCaps, "szPname")
    Next

    GUICtrlSetData($cCombo, $sDevice, $sDefault)
EndFunc   ;==>_GetDevices




Func _CreateBuffer($iSize = 256, $iID = 0)
    Local $tBuffer = DllStructCreate("uint BufferSize; byte BufferData[" & $iSize & "];" & $MIDIHDR)

    DllStructSetData($tBuffer, "BufferSize", $iSize)
    DllStructSetData($tBuffer, "lpData", DllStructGetPtr($tBuffer, "BufferData"))
    DllStructSetData($tBuffer, "dwBufferLength", $iSize)
    DllStructSetData($tBuffer, "dwUser", $iID)

    Return $tBuffer
EndFunc   ;==>_CreateBuffer



Func _Exit()
    Exit
EndFunc   ;==>_Exit
 EndFunc

 

Edited by jacoporicci

Share this post


Link to post
Share on other sites



Hi.

There is a second EndFunc below EndFunc of _FatalError(). Take this and put it above Func MessageBroadcast().

You nested these two Func inside (at the end of a) Func. Give it a try. I couldn't test anything. Just watching the code.

Conrad

1 person likes this

SciTE = 3.6.2.0/full   AutoIt = 3.3.14.2   AutoItX64 = 0   OS = Win7Pro SP1   OSArch = X64   Language = 0407/german
H:\...\AutoIt3\SciTE   H:\...\AutoIt3   H:\...\AutoIt3\Include   H: = Network Drive

   88x31.png  Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind.

Share this post


Link to post
Share on other sites

Functions can not be nested. They must exist on their own.

1 person likes this

Make yourself sheep and the wolves will eat you - Benjamin Franklin

Share this post


Link to post
Share on other sites

So how can I include more scripts into just one?

Share this post


Link to post
Share on other sites

P.S. Your functions are named _midi() and _telnet() but you call them w/o leading underscore. I think you have to Call("_midi") and Call("_telnet") or rename the functions. 


SciTE = 3.6.2.0/full   AutoIt = 3.3.14.2   AutoItX64 = 0   OS = Win7Pro SP1   OSArch = X64   Language = 0407/german
H:\...\AutoIt3\SciTE   H:\...\AutoIt3   H:\...\AutoIt3\Include   H: = Network Drive

   88x31.png  Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind.

Share this post


Link to post
Share on other sites
Just now, Simpel said:

P.S. Your functions are named _midi() and _telnet() but you call them w/o leading underscore. I think you have to Call("_midi") and Call("_telnet") or rename the functions. 

I'm afraid the problem is that I can't nest functions as ripdad pointed out. What options do I have instead of having functions to include other scripts in one big script?

Share this post


Link to post
Share on other sites

You can call a function inside another one. You are only not allowed to write a functions text inside the text of another function. 


SciTE = 3.6.2.0/full   AutoIt = 3.3.14.2   AutoItX64 = 0   OS = Win7Pro SP1   OSArch = X64   Language = 0407/german
H:\...\AutoIt3\SciTE   H:\...\AutoIt3   H:\...\AutoIt3\Include   H: = Network Drive

   88x31.png  Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind.

Share this post


Link to post
Share on other sites

Why do you want to nest functions? Just un-nest the function and call the function you wanted to nest inside the function.

So instead of:

Func _Main()
    Sleep(250)
    Func _Nested()
        MsgBox(0,"", "")
    EndFunc
EndFunc

do this:

Func _Main()
    Sleep(250)
    _Nested()
EndFunc

Func _Nested()
    MsgBox(0, "", "")
EndFunc

 

Share this post


Link to post
Share on other sites

Well, that was a very easy fix. Thank everyone for the prompt answers, will keep you posted.

 

Have a good weekend

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now