Jump to content
Sign in to follow this  
superflq

Question - $GUI_DROPACCEPTED isn't working in windows10 x64

Recommended Posts

superflq

Hi everyone,

GUICtrlSetState Function example ,i found $GUI_DROPACCEPTED isn't working in windows10 x64(windows_10_enterprise_2016_ltsb_x64).

if the example put to windows10 x86 or windows xp, the $GUI_DROPACCEPTED is effective,

the AutoIt Edition is v3.3.14.2.

any ideas? thanks you.

 

#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

Example()

Func Example()
    ; Create a GUI with various controls.
    Local $hGUI = GUICreate("Example", 420, 200, -1, -1, -1, $WS_EX_ACCEPTFILES)

    ; Create a label and set the state as drop accepted.
    Local $idLabel = GUICtrlCreateLabel("Drop a file on this label.", 10, 10, 400, 40, $WS_BORDER)
    GUICtrlSetState($idLabel, $GUI_DROPACCEPTED)

    ; Create an input and set the state as drop accepted.
    Local $idInput = GUICtrlCreateInput("", 10, 60, 400, 22)
    GUICtrlSetState($idInput, $GUI_DROPACCEPTED)

    Local $idOK = GUICtrlCreateButton("OK", 310, 170, 85, 25)

    ; Display the GUI.
    GUISetState(@SW_SHOW, $hGUI)

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE, $idOK
                ExitLoop

            Case $GUI_EVENT_DROPPED
                ; If the value of @GUI_DropId is $idLabel, then set the label of the dragged file.
                If @GUI_DropId = $idLabel Then GUICtrlSetData($idLabel, @GUI_DragFile)

        EndSwitch
    WEnd

    ; Delete the previous GUI and all controls.
    GUIDelete($hGUI)
EndFunc   ;==>Example

 

Share this post


Link to post
Share on other sites
Earthshine

it worked just fine for me on win10 pro x64. what is the expected behavior? when i drop to either control they get the name populated on that control, the label and the text control both for me.

Edited by Earthshine

My resources are limited. You must ask the right questions

 

Share this post


Link to post
Share on other sites
ViciousXUSMC

I am going to place my bet that it's a UAC / Admin privilege issue.

Not specific to the OS but rather the configuration of the instance it is being tested against. 

  • Like 1

Share this post


Link to post
Share on other sites
Earthshine

got to be perms because I have UAC set to default levels and LUA enabled


My resources are limited. You must ask the right questions

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • XinYoung
      By XinYoung
      For fun, I'm building an app that opens a webpage and refreshes it every 30 seconds.
      But once the script performs _IEAction($oIE, "refresh"), the GUI closes.
      Any help is appreciated.
       

      #include <ButtonConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <WinAPIFiles.au3>
      #include <Array.au3>
      #include <File.au3>
      #include <Excel.au3>
      #include <DateTimeConstants.au3>
      #include <MsgBoxConstants.au3>
      #include <WinAPIShellEx.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <ComboConstants.au3>
      #include <guimenu.au3>
      #include <IE.au3>
      HotKeySet("{F4}", "_Exit")
      ;Open the file(s) in the selected folder
      $extension = ".txt"
      $app2openWith = @SystemDir & "\notepad.exe"
      Func Begin()
          Global $loopTrick = 0
          #Region ### START Koda GUI section ### Form=c:\users\mchu\downloads\autoit\my code\form1.kxf
          Global $UI = GUICreate("Hit Em Up!", 256, 113, -1, -1)
          GUISetBkColor(0x000000)
          $menu = _GUICtrlMenu_GetSystemMenu($UI)
          _GUICtrlMenu_EnableMenuItem($menu, $SC_CLOSE, 1, False)
          Global $url = GUICtrlCreateInput("https://www.youtube.com/watch?v=dQw4w9WgXcQ", 81, 8, 160, 21)
          $Label1 = GUICtrlCreateLabel("Target:", 16, 8, 55, 17)
          GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
          GUICtrlSetColor(-1, 0x00FF00)
          Global $StartBut = GUICtrlCreateButton("Start", 16, 40, 67, 25)
          GUICtrlSetFont(-1, 13, 800, 0, "MS Sans Serif")
          GUICtrlSetBkColor(-1, 0x008000)
          $Label2 = GUICtrlCreateLabel("(Press F4 to Exit)", 96, 40, 8000, 17)
          GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
          GUICtrlSetColor(-1, 0x00FF00)
          GUISetState(@SW_SHOW)
          #EndRegion ### END Koda GUI section ###
          While 1
              $UIfunc = GUIGetMsg()
              Select
                  Case $UIfunc = $GUI_EVENT_CLOSE
                      _Exit()
                  Case $UIfunc = $StartBut
                      If GUICtrlRead($url) = "" Then
                          MsgBox(48, "Um...", "Give me a target you idiot.")
                      Else
                          GUICtrlSetState($url, $GUI_DISABLE)
                          GUICtrlSetState($StartBut, $GUI_DISABLE)
                          Start()
                      EndIf
              EndSelect
          WEnd
      EndFunc   ;==>Begin
      Func Start()
          If $loopTrick = 0 Then
              Global $oIE = _IECreate(GUICtrlRead($url))
              _IELoadWait($oIE)
              Again()
          ElseIf $loopTrick = 1 Then
              Sleep(3000)
              _IEAction($oIE, "refresh")
              Sleep(3000)
              Start()
          EndIf
      EndFunc   ;==>Start
      Func Again()
          $loopTrick = 1
          Start()
      EndFunc   ;==>Again
      Func _Exit()
          Exit
      EndFunc   ;==>_Exit
    • kcvinu
      By kcvinu
      Hi all,
      I have a button created with _GUICtrlButton_Create function. I know that this function returns a handle of button instead of an ID. So i have obtain control ID by calling _WinAPI_GetDlgCtrlID function. After that i have tried the GUICtrlSetBkColor function. But it didnt worked. Any suggestions will be appreciated. Thanks in advance. 
      Note : - The window which carries this button is not created with native gui create function. Instead, it is created with CreateWindowEx api function.
    • kcvinu
      By kcvinu
      Hi all,
      I am playing with _GUICtrlButton_Create function. How can i change this button's (or the entire form's) font ?. The in-built GUICtrlSetFont function is not working even when i convert the control handle to control ID with _WinAPI_GetDlgCtrlID ( ) function.  Do i need to use CreateFont api finction and send WM_SETFONT message ? Or is there any other easy and safe ways to do this ?. Thanks in advance.
      Note : This window is created by CreateWindowEx function, not by GUICreate function. 
    • Jake_s
      By Jake_s
      Hi All, 
       
      I am a begginer in auto it. I am trying to build simple gui that will show me if for example notepad.exe process is currently running on the system. I have built something like this, but when I execute it shows me message boxes, but I want the results to show in gui. If you can help me start with this.
       
      Thanks
       
        #include <MsgBoxConstants.au3>
      #include <GUIConstantsEx.au3>

      ActiveProcess()

      Func ActiveProcess()
      GUICreate("Act")
               ProcessExists("wuauclt.exe")

             If ProcessExists("wuauclt.exe") Then
       MsgBox($MB_SYSTEMMODAL, "", "Windows Upates are running")
           Else
       MsgBox($MB_SYSTEMMODAL, "", "Windows Updates are not running")
       EndIf
         ;Notepad

               ProcessExists("notepad.exe")

               If ProcessExists("notepad.exe") Then
      MsgBox($MB_SYSTEMMODAL, "", "Notepad is running")
              Else
      MsgBox($MB_SYSTEMMODAL, "", "Notepad is not running")
      EndIf  
       
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.