Jump to content
Aguilucho

Is the archive 'SciTEConfig_Source.zip' damaged?

Recommended Posts

Aguilucho

Greetings to the AutoIt community.
I hope that nobody considers my question insulting but I searched 'SciTEConfig.exe' and I did not find it anywhere;
although it is mentioned, it seems like a myth, I can not see if it exists.
On the other hand, I have downloaded the compressed archive (from ... autoit-script-editor/downloads) 'SciTEConfig_Source.zip'
Does not contain any .exe either but does have a 'SciteConfig.au3' which, I suppose, has replaced the .exe because on the internet I only find it as malware.

My problem is: My applications to unzip .zip archives, they can see what files SciTEConfig_Source.zip have but they can not unzip it: 'Unknown method' says WinRar.
    I have downloaded it again, in case it had been damaged but the result is always the same.


My question is: Is the archive 'SciTEConfig_Source.zip' damaged or does it have any other method of compression?
I need it to learn how to configure SciTE (lite).

Thankful to the developers of AutoIt and to the community.
Regards
 

Share this post


Link to post
Share on other sites
Jos
2 hours ago, Aguilucho said:

I hope that nobody considers my question insulting but I searched 'SciTEConfig.exe' and I did not find it anywhere;
although it is mentioned, it seems like a myth, I can not see if it exists.
On the other hand, I have downloaded the compressed archive (from ... autoit-script-editor/downloads) 'SciTEConfig_Source.zip'
Does not contain any .exe either but does have a 'SciteConfig.au3' which, I suppose, has replaced the .exe because on the internet I only find it as malware.

From the History information:

Quote

--------------------------------------------------------------------------------------------------
29-7-2015
This release has all the compiled scripts pulled out of the setup and we are now only using AutoIt3.exe to run the source for all the script utilities.
Main reason for making the change is the regular reports of False Positive Virus warmings.
Please report any issues due to this change of approach.

So indeed, I do not distribute compiled scripts anymore and there is not need to as you can run it with Autoit3.

Jos


Visit the SciTE4AutoIt3 Download page for the latest versions  - Beta files                                How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
Aguilucho

Many thanks Jos:

I understand that, but I don't understand yet the answer to my question:

Is the archive 'SciTEConfig_Source.zip' damaged?

It's not an exe nor an au3, its only a zip that I would like to try.

"My problem is: My applications to unzip .zip archives, they can see what files SciTEConfig_Source.zip have but they can not unzip it: 'Unknown method' says WinRar."

Can I get anyway an ok copy of  'SciTEConfig_Source.zip'?

Best regards,

 

Share this post


Link to post
Share on other sites
Bilgus

I see what you mean I downloaded and got the same error

Instead I used 7ZFM and opened it.

I was then able to Select All and extract the files within really not sure why that worked but doing it with the context menu failed

Share this post


Link to post
Share on other sites
Bilgus

Went to properties and selected 'Unblock' Works

Renaming the Archive .Rar works as well

Share this post


Link to post
Share on other sites
Aguilucho

Thanks Bilgus:

I downloaded 7-Zip v18.01 compressor (.exe) from developer site 'https://www.7-zip.org/'I used on 'SciTEConfig_Source.zip' and all was fine.

I didn't change filetype from .zip and all was fine

7-Zip is free software with open source

I put the link because I needed search it on internet and because it's original and free and because it is a contribution for AutoIt community, especially for SciTEConfig interested.

Again, Thanks you Bilgus. Have you very nice days

Share this post


Link to post
Share on other sites
Jos

Sorry I missed that part as I thought you assumed the zip file had an issue due to the exe not being there.
I indeed use 7zip to compress that archive and hadn't received any reports it causing issues while this automated process is in place for many years now

Jos


Visit the SciTE4AutoIt3 Download page for the latest versions  - Beta files                                How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Jos
      By Jos
      7/8/2018: Uploaded a new SciTe4AutoIt3.exe v18.708.1148.0 installer.
      It has been over a year since the last update of the full SciTE4AutoIt3 installer whch mainly had to do with the fact that Neil was moving toward v4 of SciTE and I wanted to wait for a stable version.
      Any help with testing this version before general release is appreciated.
      Also any feedback is welcome in caseI missed something or suggestions for improvement before releasing.
      ==> SciTE4AutoIt3 v18.708.1148.0
      Enjoy,
      Jos

      Addition/Changes/Fixes in the current installer:
      -------------------------------------------------------------------------------------------------- 8-7-2018 *** Merged the SciTE v 4.1.0 by Neil Hodgson with our own version of SciTE. (Jos)     This is a major change from the previous version so ensure you update all files including LUA or else you will get errors!     - SciLexer au3: Fixed issues with nested CommentBlocks not always showing the correct color.     - SciLexer au3: Change any line starting with # and no recognised keyword to be shown with the Pre-Processor in stead of default.     - Changed Shortcut for AU3INFO to Ctrl+Shift+F6.     - Moved the session restore logic for (save.session.advanced=1)into SciTE in stead of LoadSession.lua as that was clearing the recent files list of the last session       when opening a file by double cliking it. This is fixed with this change.       Default remains 0 so when a file is double clicked the last session isn't restored unless you add this to SciTEuser.properties:       "save.session.advanced=1"     - updated Tools.lua replacing [s%] with [ /t] to avoid empty lines being stripped by those functions. (Thanks Enyby) *** Updated AutoIt3Wrapper v18.708.1148.0 (Jos)     - 17.224.935.1 Added /autoit3dir to au3stripper commandline, when provided to AutoIt3Wrapper., to ensure the included files are for the correct AutoIt3 directory     - 17.224.935.2 Added directives:          #AutoIt3Wrapper_Res_CompanyName=          ;Company field          #AutoIt3Wrapper_Res_LegalTrademarks=      ;Trademark field     - 17.224.935.5 Fixed Versioning when files contain backets ->  ()     - 17.224.935.6 Added support for :          #AutoIt3Wrapper_Au3stripper_Stop_OnError=        ;(Y/N) Continue/Stop on Warnings.(Default=N)     - 17.224.935.7 added INI support for:           [Other]            Au3Stripper_Stop_OnError=n     - 17.224.935.10 Minor changes in console messages     - 17.224.935.11 Modifications from JPM:         - add #AutpIt3Wrapper_Res_Cursor_Add         - "clean" a little bit AutoIt3Wrapper.au3 *** Updated Au3Stripper v18.708.1148.0 (Jos)     - 17.224.935.1 Fixed crash when an include file contains longer record than 4096 characters.     - 17.224.935.2 Changed /rsln to replace @ScriptLineNumber in the Master script with "XXX/YYY". XXX is the master script linenumber, YYY is the Merged script linenumber.     - 17.224.935.3 Fixed issue detecting #cs #ce when a space was missing after the directive.     - 17.224.935.4 Changed Close/Open logic for Tracelog to (hopefully) avoid the hardcrash.     - 17.224.935.5 improved speed avoiding rereading include files to determine the max rec len.     - 17.224.935.6 improved speed by re-coding the check for long records.     - 17.224.935.7 Made sure the returncode is the highest from all iterations in stead of the last iteration.     - 17.224.935.8 fix for reported bug: https://www.autoitscript.com/trac/autoit/ticket/3623#comment:4     - 17.224.935.9 added support for #autoit3wrapper_autoit3dir     - 17.224.935.10 Fixed support for #autoit3wrapper_autoit3dir when followed by linecomment                     Stop processing when include file isn't found.     - 18.624.1847.1 strip the leading and trailing double quotes from the autoit3dir directive to avoid an error when they are specified.     - 18.624.1847.2 Fixed Hardcrash in the Include logic     - 18.624.1847.3 Fixed Hardcrash in Func stripping logic by enlarging the base table size     - 18.702.1556.1 Fixed regression bug with the Translate option.     - 18.703.1808.2 Fixed regression bug with the Stripping FUNC logic for the first found FUNC. *** Updated SciTEConfig v18.708.1148.0 (Jos)     - 17.224.935.1 No updates *** Updated Tidy v18.708.1148.0 (Jos)     - 17.224.935.1 Added option  to copy comments from #CS to #CE. Default is to copy the comments.                    Added Tidy Parameters:  /Skip_CE_Comment or /scec will skip this copy action                    Added INI option:                      * * *  Add comment to #CE/#CommentEnd and make it the same as the #CS/CommentStart Comments.                      ce_comment=1     - 17.224.935.2 Fix issue with Copy comments on comment start - end     - 17.224.935.4 Fix another issue with Copy comments on comment start - end -------------------------------------------------------------------------------------------------- ==> ScitillaHistory page containing all SciTE-Scintilla updates.
      ==> Visit the SciTE4AutoIt3 Download page for the latest versions
      ==> Check the online documentation for an overview of all extra's you get with this installer.
    • sumanth1980
      By sumanth1980
      Here i am wrote a simple lines to install basic applications but when i clicked on one application/program to install it was working fine but when i cancel the program in the middle to install another program it was not working. I am not an expert in this but i want a solution for this ... Can any one help me on this....
      ORG-1.au3
    • FrancescoDiMuro
      By FrancescoDiMuro
      Good evening everyone
      I was trying to insert function header to the functions of my script, but, in the SciTE console, this appears:
      Function or struct definition not found, unable to insert header. @Jos Any suggestion?
      Thanks in advance.

      Best Regards.
    • cheeroke
      By cheeroke
      Hi I am not sure how to call it properly, but for those of you who use SciTE, when you typing built in function and about to pass parameters to it you can see popup with all the ones which can be passed.
      Question: how to create something like that for my own functions?
       
      Thanks
    • therks
      By therks
      Does SciTE have string or number ids for the recent file menu items?
      I was hoping to add shortcuts (using the user.shortcuts properties) to the most recent item, but the documentation doesn't list any id's for those items (unless I overlooked?).
      Also, did anyone else notice that the index listing for the SciTE doc doesn't work properly?
      It appears it's linking to this: mk:@MSITStore:C:\Program%20Files\AutoIt3\SciTE\Scite4AutoIt3.chm::/SciTEDocumentation.html
      When it should be this? mk:@MSITStore:C:\Program%20Files\AutoIt3\SciTE\Scite4AutoIt3.chm::/Scitedoc/SciTEDoc.html
×